summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
AgeCommit message (Collapse)Author
2024-04-15arm64: dts: allwinner: drop underscore in node namesKrzysztof Kozlowski
Underscores should not be used in node names (dtc with W=2 warns about them), so replace them with hyphens. Use also generic name for pwrseq node, because generic naming is favored by Devicetree spec. All the clocks affected by this change use clock-output-names, so resulting clock name should not change. Functional impact checked with comparing before/after DTBs with dtx_diff and fdtdump. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20240317184130.157695-2-krzysztof.kozlowski@linaro.org Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2022-04-10arm64: dts: allwinner: a64: olinuxino: Enable audioPhilip Rinn
Enable the audio hardware on the Olimex A64-OLinuXino board family. Tested on the A64-OLinuXino-2Ge8G-IND variant. Signed-off-by: Philip Rinn <rinni@inventati.org> Acked-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220407155145.10891-1-rinni@inventati.org
2021-03-06arm64: dts: allwinner: Use the new r_intc bindingSamuel Holland
The binding of R_INTC was updated to allow specifying interrupts other than the external NMI, since routing those interrupts through the R_INTC driver allows using them for wakeup. Update the device trees to use the new binding. Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2020-04-14arm64: dts: allwinner: a64: olinuxino: add user red LEDPetr Štetiar
There is a red LED marked as `GPIO_LED1` on the silkscreen and connected to PE17 by default. So lets add this missing bit in the current hardware description. Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-02-10arm64: dts: allwinner: a64: Add gpio bank supply for A64-OlinuxinoEmmanuel Vadot
Add the regulators for each bank on this boards. For VCC-PL only add a comment on what regulator is used. We cannot add the property without causing a circular dependency as the PL pins are used to talk to the PMIC. Signed-off-by: Emmanuel Vadot <manu@freebsd.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-02-08Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM Device-tree updates from Olof Johansson: "New SoCs: - Atmel/Microchip SAM9X60 (ARM926 SoC) - OMAP 37xx gets split into AM3703/AM3715/DM3725, who are all variants of it with different GPU/media IP configurations. - ST stm32mp15 SoCs (1-2 Cortex-A7, CAN, GPU depending on SKU) - ST Ericsson ab8505 (variant of ab8500) and db8520 (variant of db8500) - Unisoc SC9863A SoC (8x Cortex-A55 mobile chipset w/ GPU, modem) - Qualcomm SC7180 (8-core 64bit SoC, unnamed CPU class) New boards: - Allwinner: + Emlid Neutis SoM (H3 variant) + Libre Computer ALL-H3-IT + PineH64 Model B - Amlogic: + Libretech Amlogic GX PC (s905d and s912-based variants) - Atmel/Microchip: + Kizboxmini, sam9x60 EK, sama5d27 Wireless SOM (wlsom1) - Marvell: + Armada 385-based SolidRun Clearfog GTR - NXP: + Gateworks GW59xx boards based on i.MX6/6Q/6QDL + Tolino Shine 3 eBook reader (i.MX6sl) + Embedded Artists COM (i.MX7ULP) + SolidRun CLearfog CX/ITX and HoneyComb (LX2160A-based systems) + Google Coral Edge TPU (i.MX8MQ) - Rockchip: + Radxa Dalang Carrier (supports rk3288 and rk3399 SOMs) + Radxa Rock Pi N10 (RK3399Pro-based) + VMARC RK3399Pro SOM - ST: + Reference boards for stm32mp15 - ST Ericsson: + Samsung Galaxy S III mini (GT-I8190) + HREF520 reference board for DB8520 - TI OMAP: + Gen1 Amazon Echo (OMAP3630-based) - Qualcomm: + Inforce 6640 Single Board Computer (msm8996-based) + SC7180 IDP (SC7180-based)" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (623 commits) dt-bindings: fix compilation error of the example in marvell,mmp3-hsic-phy.yaml arm64: dts: ti: k3-am654-base-board: Add CSI2 OV5640 camera arm64: dts: ti: k3-am65-main Add CAL node arm64: dts: ti: k3-j721e-main: Add McASP nodes arm64: dts: ti: k3-am654-main: Add McASP nodes arm64: dts: ti: k3-j721e: DMA support arm64: dts: ti: k3-j721e-main: Move secure proxy and smmu under main_navss arm64: dts: ti: k3-j721e-main: Correct main NAVSS representation arm64: dts: ti: k3-j721e: Correct the address for MAIN NAVSS arm64: dts: ti: k3-am65: DMA support arm64: dts: ti: k3-am65-main: Move secure proxy under cbass_main_navss arm64: dts: ti: k3-am65-main: Correct main NAVSS representation ARM: dts: aspeed: rainier: Add UCD90320 power sequencer ARM: dts: aspeed: rainier: Switch PSUs to unknown version arm64: dts: rockchip: Kill off "simple-panel" compatibles ARM: dts: rockchip: Kill off "simple-panel" compatibles arm64: dts: rockchip: rename dwmmc node names to mmc ARM: dts: rockchip: rename dwmmc node names to mmc arm64: dts: exynos: Rename Samsung and Exynos to lowercase arm64: dts: uniphier: add reset-names to NAND controller node ...
2020-01-13arm64: dts: allwinner: a64: enable DVFSVasily Khoruzhick
Add CPU regulator and operating points for all the A64-based boards that are currently supported to enable DVFS. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-12-16arm64: dts: allwinner: unify header comment styleClément Péron
Allwinner device tree files used different comment style for copyright notice. Update this to keep a coherency. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-12-16arm64: dts: allwinner: Convert license to SPDX identifierClément Péron
Use a shorter SPDX identifier instead of pasting the whole license. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-12-16arm64: dts: allwinner: Fix wrong license headerClément Péron
Some headers specify that files are under dual-licensed GPL2.0+ and X11. But in fact, it turns out that the full licenses texts associated are GPL2.0+ and MIT. Fix license headers to reflect real licenses associated. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-12-11arm64: dts: allwinner: a64: olinuxino: Add bank supply regulatorsStefan Mavrodiev
Allwinner A64 SoC has separate supplies for PC, PD, PE, PG and PL. This patch adds regulators for them to the pinctrl node. Exception is PL which is used by the RSB bus. To avoid circular dependencies, VCC-PL is omitted. On boards with eMMC, VCC-PC is supplied by ELDO1, instead of DCDC1. Signed-off-by: Stefan Mavrodiev <stefan@olimex.com> [Maxime: Changed the r_pio comment a bit] Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-12-09arm64: dts: allwinner: a64: olinuxino: Fix SDIO supply regulatorStefan Mavrodiev
A64-OLinuXino uses DCDC1 (VCC-IO) for MMC1 supply. In commit 916b68cfe4b5 ("arm64: dts: a64-olinuxino: Enable RTL8723BS WiFi") ALDO2 is set, which is VCC-PL. Since DCDC1 is always present, the boards are working without a problem. This patch sets the correct regulator. Fixes: 916b68cfe4b5 ("arm64: dts: a64-olinuxino: Enable RTL8723BS WiFi") Cc: stable@vger.kernel.org # v4.16+ Signed-off-by: Stefan Mavrodiev <stefan@olimex.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-02-06arm64: dts: allwinner: a64: Enable PMIC power supplies on various boardsChen-Yu Tsai
On these A64 devices, the DC input jacks are wired to the ACIN pins of the PMIC, which is represented by the AC power supply. With the exception of the Nanopi A64, all devices include LiPo batteries or have connectors for them, which are represented by the battery power supply. Enable these power supplies in the device tree. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-09-27arm64: dts: allwinner: a64: a64-olinuxino: set the PHY TX delayRodrigo Exterckötter Tjäder
The PHY found on the A64-OLinuXino requires a TX delay in order to operate properly. Olimex uses a 600ps second delay in their BSP, and that has been found to work, so let's use that value in the current DT. Signed-off-by: Rodrigo Exterckötter Tjäder <rodrigo@tjader.xyz> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2018-09-25arm64: dts: allwinner: a64: Enable HDMI output on A64 boards w/ HDMIJagan Teki
Enable all necessary device tree nodes and add connector node to device trees for all supported A64 boards with HDMI. Jagan, tested on BPI-M64, OPI-Win, A64-Olinuxino, NPI-A64 Vasily, tested on pine64-lts Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> [Icenowy: squash all board patches altogether and change supply name] Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Tested-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2018-09-03arm64: dts: allwinner: a64: Rename uart0_pins_a label to uart0_pb_pinsChen-Yu Tsai
The pinmux name and label for a specific function should denote which pingroup it is on, or if there is only one option for the function, have not enumerating prefix/suffix at all. The "uart0_pins_a" label is renamed to "uart0_pb_pins" to fit our current style. The node name "uart0" is also changed to "uart0-pb-pins" to match. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2018-08-27arm64: dts: allwinner: a64: Olinuxino: enable USBAndre Przywara
The Olinuxino has two USB sockets: USB0 is connected to a micro B socket. As it has the ID pin wired and the VBUS line connected to the PMIC, we describe it as a proper OTG socket, which switches between host and device automatically. USB1 is connected to a normal USB A socket. PG9 enables the power line, so add the required regulator as well. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2018-08-27arm64: dts: allwinner: a64: Olinuxino: add Ethernet nodesAndre Przywara
Add the DT nodes required to enable the Gigabit Ethernet on the board. The PHY is powered by the always-on power rail VDD_SYS_3.3V (DCDC1). Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2018-08-27arm64: dts: allwinner: a64: Olinuxino: fix DRAM voltageAndre Przywara
The Olinuxino board uses DDR3L chips which are supposed to be driven with 1.35V. The reset default of the AXP is properly set to 1.36V. While technically the chips can also run at 1.5 volts, changing the voltage on the fly while booting Linux is asking for trouble. Also running at a lower voltage saves power. So fix the DCDC5 value to match the actual board design. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Martin Lucina <martin@lucina.net> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2018-06-27arm64: dts: allwinner: a64: add HDMI regulator to all DTs' simplefb_hdmiIcenowy Zheng
On usual A64 board design the power of HDMI controller is connected to DLDO1 of the AXP803 PMIC. If this regulator is shut down, the HDMI output will be blank. Therefore the simplefb driver should keep this regulator on. Add the regulator to all currently available A64 boards' simplefb_hdmi device node, if the board is capable of outputing HDMI. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-02-14arm64: dts: sunxi: Switch MMC nodes away from cd-inverted propertyTuomas Tynkkynen
Using the cd-inverted property is not useful when GPIOs are used as card detects since the polarity can be specified with the usual GPIO_ACTIVE_(HIGH|LOW) GPIO flags. It has also caused confusion for U-Boot developers, so migrate all sunxi boards away from cd-inverted. Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2017-12-05arm64: dts: a64-olinuxino: Enable RTL8723BS WiFiJagan Teki
Enable RTL8723BS WiFi chip on a64-olinuxino board: - WiFi SDIO interface is connected to MMC1 - WiFi REG_ON pin connected to gpio PL2: attach to mmc-pwrseq - WiFi HOST_WAKE pin connected to gpio PL3 Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-08-15arm64: allwinner: a64: Add A64-OLinuXino initial supportJagan Teki
OLimex A64-OLinuXino is an open-source hardware board using the Allwinner A64 SOC. OLimex A64-OLinuXino has - A64 Quad-core Cortex-A53 64bit - 1GB or 2GB RAM DDR3L @ 672Mhz - microSD slot and 4/8/16GB eMMC - Debug TTL UART - HDMI - LCD - IR receiver - 5V DC power supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-25 00:59:03 +0000