feat: Add missing blog post

Add the missing blog post from my hugo blog. Also add a locustfile so I
can do some stress test locally.

13 files changed, 396 insertions, 27 deletions

diff --git a/.gitignore b/.gitignore
index 96ef862..634077d 100644
--- a/.gitignore
+++ b/.gitignore
@@ -1,2 +1,3 @@
 target/
 .idea/
+__pycache__/
diff --git a/content/posts/2019-03-03Welcome_to_my_blog.html b/content/posts/2019-03-03Welcome_to_my_blog.html
new file mode 100644
index 0000000..10b1f05
--- /dev/null
+++ b/content/posts/2019-03-03Welcome_to_my_blog.html
@@ -0,0 +1,6 @@
+<section>
+    <p>
+      On this blog, I'll be posting some personal projects that I'm working on
+      or just logging stuff that I don't want to forget.
+    </p>
+</section>
diff --git a/content/posts/2019-03-07Automating_desktop_setup_with_ansible-pull_part-1.html b/content/posts/2019-03-07Automating_desktop_setup_with_ansible-pull_part-1.html
new file mode 100644
index 0000000..d06a648
--- /dev/null
+++ b/content/posts/2019-03-07Automating_desktop_setup_with_ansible-pull_part-1.html
@@ -0,0 +1,94 @@
+<section>
+  <p>
+    Every time that I do a clean install on my machine it takes a few hours till I
+    get to point where I was before formatting it, install all packages, select
+    themes, icons, fonts, install IDEs, extensions and so on. After doing it a few
+    times I came to the conclusion that I would save time by spending time
+    automating this chore, and as a result, I could tinker a little more with my
+    system and not worry about spending a weekend re-installing everything (which
+    have happened more time that I'd like to remember).
+  </p>
+  <p>
+    So after a few attempts using python and bash I ended with many files and
+    keep everything organized and concise turned out to be more tedious than the
+    setup itself. So there comes <a href="https://www.ansible.com/">Ansible</a>.
+    It is an enterprise-graded software used to automate tasks. It has A LOT OF
+    features and it can be really helpful if you're a sysadmin but for now we're
+    going to focuson
+    <a href="https://docs.ansible.com/ansible/latest/user_guide/playbooks_intro.html#ansible-pull">
+      Ansible Pull
+    </a>
+    and
+    <a href="https://docs.ansible.com/ansible/latest/user_guide/playbooks.html">
+      Playbooks
+    </a>. As better described:
+    <blockquote>
+      [Ansible-Pull] is used to up a remote copy of ansible on each managed
+      node, each set to run via cron and update playbook source via a source
+      repository. This inverts the default push architecture of Ansible into a
+      pull architecture, which has near-limitless scaling potential.
+
+      Playbooks are Ansible’s configuration, deployment, and orchestration
+      language. They can describe a policy you want your remote systems to
+      enforce, or a set of steps in a general IT process.
+      (<a href="https://docs.ansible.com/ansible/latest/cli/ansible-pull.html">source</a>)
+    </blockquote>
+  </p>
+  <p>
+    The goal is to pull and run a playbook remotely using a git repository. The
+    playbook will describe the tasks needed to setup our machine from scratch.
+    <br/>
+    But first lets tinker a bit a with playbooks locally with ansible-playbook,
+    to do so we need to add localhost to ansible's hosts list. Add it to
+    /etc/ansible/hosts:
+<pre><code>[all]
+localhost</code></pre>
+  </p>
+  <p>
+    As an experiment we're going to write a asks to install vim. Currently, I'm
+    using Fedora thus we going to use dnf modeule to install packages, but if
+    you're using another distribution look for a equivalent module like apt
+    module for Ubuntu.
+
+    The playbook to install is quite simple:
+
+<pre><code># main.yaml
+- hosts: all
+  tasks:
+     - name: install vim
+       dnf:
+         name: vim
+         state: latest</code></pre>
+    <dl>
+        <dt>host</dt>
+        <dd>it is required and it has to match our hosts otherwise the playbook won't run.</dd>
+        <dt>taks</dt>
+        <dd>
+          it is the list of tasks that the playbook will perform, in this case
+          will be dnf install vim.
+        </dd>
+    </dl>
+  </p>
+  <p>
+    To run a playbook use the command ansible-playbook commando to run main.yml
+    direct from disk, do to so just run the following command:
+<pre><code>sudo ansible-playbook --connection=local main.yml</code></pre>
+  </p>
+  <p>
+    After a few seconds, vim will be installed on your machine.
+<pre><code>PLAY [all] *************************************************************
+
+TASK [Gathering Facts] *************************************************
+ok: [localhost]
+
+TASK [install vim] *****************************************************
+ok: [localhost]
+
+PLAY RECAP *************************************************************
+localhost                  : ok=2    changed=0    unreachable=0    failed=0</code></pre>
+  </p>
+  <p>
+    This is the first step, next part we shall create a more complex playbook and
+    setup repository to run it remotely using ansible-pull.
+  </p>
+</section>
diff --git a/content/posts/2019-04-22Automating_desktop_setup_with_ansible-pull_part-2.html b/content/posts/2019-04-22Automating_desktop_setup_with_ansible-pull_part-2.html
new file mode 100644
index 0000000..707ba7d
--- /dev/null
+++ b/content/posts/2019-04-22Automating_desktop_setup_with_ansible-pull_part-2.html
@@ -0,0 +1,70 @@
+<section>
+  <a href="/posts/2019-03-07Automating_desktop_setup_with_ansible-pull_part-1.html">See part 1</a>
+  <p>
+    Now we're going to setup ansible to work with a git repository. The process is
+    quite similar to ansible-playbook, the only difference is that the source for
+    the playbook will be a remote repository and not a local file. Following the
+    previous example we'll get vim setup automated.
+  </p>
+  <p>
+     Create a git repository wherever you see
+     fit, <a href="https://about.gitlab.com/">gitlab</a>
+     and <a href="https://github.com/">github</a> offer free repositories. For
+     this task we need to add only two file: one for the yml file describing the
+     tasks and the .vimrc file.
+  </p>
+  <p>
+    In the .vimrc add your own configuration, you can see
+    mine
+    <a href="https://gitlab.com/gabrielgio/homestation/-/blob/debcf3458df511aef9f7dca0cb73f6cf6baddd5d/.vimrc">
+      over here
+    </a>, it is pretty simple as I don't use it but for simple text editing
+    (like this post) so you can start with that if you don't have one.
+  </p>
+  <p>
+    The yml file will have two tasks, one is to install vim, just like we did in the part 1.
+<pre><code># main.yml
+---
+- name: install vim
+  dnf:
+    name: vim
+    state: latest</code></pre>
+  </p>
+  <p>
+    To copy .vimrc file to your $HOME we going to
+    use <a href="https://docs.ansible.com/ansible/latest/modules/copy_module.html">copy
+    module</a>:
+  </p>
+  <p>
+    After we've added those two files to repository you will have be something
+    <a href="https://gitlab.com/gabrielgio/homestation/-/tree/debcf3458df511aef9f7dca0cb73f6cf6baddd5d">
+      like this.
+    </a>
+    <br/>
+    Parms:
+    <ul>
+      <li><strong>-i</strong> is a list of hosts</li>
+      <li><strong>-U</strong> is the get repository url</li>
+    </ul>
+  </p>
+  <p>
+    Remember man is your best friend, take a look at <code>man ansible-pull</code> to know
+    more about its parameters.
+  </p>
+  <p>
+    The best part you can quickly test and see the result by running my sample:
+<pre><code>ansible-pull \
+    -U https://gitlab.com/gabrielgio/homestation.git \
+    -C debcf3458df511aef9f7dca0cb73f6cf6baddd5d \
+    -i all \
+    main.yml</code></pre>
+  </p>
+  <p>
+    The idea here is to keep your repository as a source of truth when comes to
+    configuration, you can add ansible-pull to a CRON tab, so you just need to
+    push something to your repository and after a few minutes not only your
+    machine but all the machines that have it setup will run the playbooks. You
+    can use this method as a simple way to install software, update machines or
+    even distribute tooling company-wise.
+  </p>
+</section>
diff --git a/content/posts/2019-11-16Compiling_emacs_from_source_code_on_fedora.html b/content/posts/2019-11-16Compiling_emacs_from_source_code_on_fedora.html
new file mode 100644
index 0000000..f47040f
--- /dev/null
+++ b/content/posts/2019-11-16Compiling_emacs_from_source_code_on_fedora.html
@@ -0,0 +1,31 @@
+<section>
+<p>
+ Compiling emacs from source and installing on fedora.
+</p>
+<h3>Installing packages</h3>
+<p>
+  Install the following packages:
+<pre><code>sudo dnf install git autoconf make gcc texinfo \
+    gnutls-devel giflib-devel ncurses-devel \
+    libjpeg-turbo-devel giflib-devel gtk3-devel \
+    libXpm-devel libtiff-devel libxml2-devel -y</code></pre>
+</p>
+<h3>Cloning Repository</h3>
+<p>
+  Clone repository
+  <a href="http://savannah.gnu.org/projects/emacs/">savannah.gnu.org</a>
+<pre><code>git clone -b master git://git.sv.gnu.org/emacs.git</code></pre>
+</p>
+<h3>Compiling</h3>
+<p>
+  Navigate to the emacs folder <code>cd emacs</code> and execute the following
+  steps:
+<pre><code>./autogen.sh
+./configure
+make -j$(nproc)
+sudo make install
+</code></pre>
+  After verify version with <code>./emacs --version</code>, it
+  should be equal or higher than <strong>28.0.50</strong>.
+</p>
+</section>
diff --git a/content/posts/2020-07-12Road_to_local_K8S.html b/content/posts/2020-07-12Road_to_local_K8S.html
new file mode 100644
index 0000000..5d34b27
--- /dev/null
+++ b/content/posts/2020-07-12Road_to_local_K8S.html
@@ -0,0 +1,101 @@
+<section>
+  <h3>Goal</h3>
+  <p>
+    The goal is to deploy kubernetes on my local networks, and keep everything
+    as reproducible as possible.
+  </p>
+  <h3>Stack</h3>
+  <p>
+    I'll use Fedora Core OS, Matchbox and Terraform
+    <sup><a href="#footnotes">1</a></sup>, a match the requirements for
+    Tectonic<sup><a href="#footnotes">2</a></sup>.</p>
+  <h3>Steps</h3>
+  <ul>
+    <li>Network Setup DHCP/TFTP/DNS<sup><a href="#footnotes">3</a></sup></li>
+    <li>Matchbox<sup><a href="#footnotes">4</a></sup></li>
+    <li>PXE nextwork boot evnrionment</li>
+    <li>Terraform Tectonic<sup><a href="#footnotes">5</a></sup></li>
+  </ul>
+  <h3>Network Setup DHCP/TFTP/DNS</h3>
+  <p>First learning the basics</p>
+  <ul>
+    <li>
+      <a href="https://linuxhint.com/install_dhcp_server_ubuntu/">
+        https://linuxhint.com/install_dhcp_server_ubuntu/
+      </a>
+    </li>
+    <li>
+      <a href="https://www.youtube.com/watch?v=XQ3T14SIlV4">
+        https://www.youtube.com/watch?v=XQ3T14SIlV4
+      </a>
+    </li>
+  </ul>
+  <p>
+    To check open ports
+<pre><code>lsof -Pni | grep LISTEN</code></pre>
+  </p>
+  <p>
+    Run the provided<sup><a href="#footnotes">6</a></sup> image with dnsmasq and
+    PXE toolkit
+<pre><code>docker run --rm --cap-add=NET_ADMIN --net=host quay.io/coreos/dnsmasq \
+  -d -q \
+  --dhcp-range=192.168.1.3,192.168.1.254 \
+  --enable-tftp --tftp-root=/var/lib/tftpboot \
+  --dhcp-match=set:bios,option:client-arch,0 \
+  --dhcp-boot=tag:bios,undionly.kpxe \
+  --dhcp-match=set:efi32,option:client-arch,6 \
+  --dhcp-boot=tag:efi32,ipxe.efi \
+  --dhcp-match=set:efibc,option:client-arch,7 \
+  --dhcp-boot=tag:efibc,ipxe.efi \
+  --dhcp-match=set:efi64,option:client-arch,9 \
+  --dhcp-boot=tag:efi64,ipxe.efi \
+  --dhcp-userclass=set:ipxe,iPXE \
+  --dhcp-boot=tag:ipxe,http://matchbox.example.com:8080/boot.ipxe \
+  --address=/matchbox.example/192.168.1.2 \
+  --log-queries \
+  --log-dhcp</code></pre>
+  </p>
+  <h3>Matchbox</h3>
+  <p>...</p>
+  <h3>PXE network boot enviroment</h3>
+  <p>...</p>
+  <h3>Terraform Tectonic</h3>
+  <p>...</p>
+  <h3 id="footnotes">Links</h3>
+  <div >
+    <sup>1</sup>
+    <a href="https://coreos.com/tectonic/docs/latest/install/bare-metal/metal-terraform.html">
+      https://coreos.com/tectonic/docs/latest/install/bare-metal/metal-terraform.html
+    </a>
+  <div>
+  <div>
+    <sup>2</sup>
+    <a href="https://coreos.com/tectonic/docs/latest/install/bare-metal/requirements.html">
+      https://coreos.com/tectonic/docs/latest/install/bare-metal/requirements.html
+    </a>
+  <div>
+  <div>
+    <sup>3</sup>
+    <a href="https://coreos.com/matchbox/docs/latest/network-setup.html">
+      https://coreos.com/matchbox/docs/latest/network-setup.html
+    </a>
+  <div>
+  <div>
+    <sup>4</sup>
+    <a href="https://coreos.com/matchbox/docs/latest/deployment.html">
+      https://coreos.com/matchbox/docs/latest/deployment.html
+    </a>
+  <div>
+  <div>
+    <sup>5</sup>
+    <a href="https://coreos.com/tectonic/releases/">
+      https://coreos.com/tectonic/releases/
+    </a>
+  <div>
+  <div>
+    <sup>6</sup>
+    <a href="https://github.com/poseidon/matchbox/tree/v0.7.0/contrib/dnsmasq">
+      https://github.com/poseidon/matchbox/tree/v0.7.0/contrib/dnsmasq
+    </a>
+  <div>
+</section>
diff --git a/content/posts/2020-07-14Friz_box_turned_off_DHCP.html b/content/posts/2020-07-14Friz_box_turned_off_DHCP.html
index 7eb69ef..3ee5daf 100644
--- a/content/posts/2020-07-14Friz_box_turned_off_DHCP.html
+++ b/content/posts/2020-07-14Friz_box_turned_off_DHCP.html
@@ -1,9 +1,11 @@
 <section>
     <p>
-        If you turned off your DHCP server follow these steps to connect to FritzBox settings.
-        <br/>
+        If you turned off your DHCP server follow these steps to connect to
+        FritzBox settings. <br/>
     <ul>
-        <li> Set your computer IP to 170.254.1.2 and your mask to 255.255.0.0</li>
+        <li>
+            Set your computer IP to 170.254.1.2 and your mask to 255.255.0.0
+        </li>
         <li> Then go to 169.254.1.1, login and re-enable the DHCP server:</li>
     </ul>
     </p>
@@ -11,7 +13,7 @@
         On gnome turn the wired connection off on again to apply the settings.
     </p>
     <p>
-        <strong>Note</strong>: why in the hell does FritzBox 7490 require a land-line telephone to be physically factory
-        reset?
+        <strong>Note</strong>: why in the hell does FritzBox 7490 require a
+        land-line telephone to be physically factory reset?
     </p>
 </section>
diff --git a/content/posts/2020-08-22Moving_from_Github_to_Gilab_pages.html b/content/posts/2020-08-22Moving_from_Github_to_Gilab_pages.html
new file mode 100644
index 0000000..5fb1d78
--- /dev/null
+++ b/content/posts/2020-08-22Moving_from_Github_to_Gilab_pages.html
@@ -0,0 +1,38 @@
+<section>
+  <p>
+    This was quite simple, I had just to create a simple Gitlab pipeline job and
+    publish to pages this is done by:
+  </p>
+  <pre><code>image: clojure:lein-2.7.0
+
+before_script:
+  - lein deps
+
+test:
+  script:
+    - lein test
+
+pages:
+  stage: deploy
+  script:
+    - lein package
+  artifacts:
+    paths:
+      - public
+  only:
+    - master</code></pre>
+  <dl>
+    <dt>before_script</dt>
+    <dd>will download all the dependencies with <code>lein deps.</code></dd>
+    <dt>test</dt>
+    <dd>it is self explanatory</dd>
+    <dt>pages</dt>
+    <dd>
+      it will compile cljs into js with <code>lein package</code> into
+      <code>public</code> folder to later be published into gitlab pages. Take a
+      look at the <code>artifacts</code> property, it is used to say wich will
+      will be collected.
+    </dd>
+  </dl>
+
+</section>
diff --git a/content/posts/2021-12-26Enable_NFS_on_K3S.html b/content/posts/2021-12-26Enable_NFS_on_K3S.html
index 09f91e7..22ddf33 100644
--- a/content/posts/2021-12-26Enable_NFS_on_K3S.html
+++ b/content/posts/2021-12-26Enable_NFS_on_K3S.html
@@ -1,10 +1,10 @@
 <section>
     <p>
-        By default <a href="https://k3s.io/">K3S</a> comes only with <a
-            href="https://github.com/rancher/local-path-provisioner">local-path</a> storage class, and if you are
-        running
-        with more than one node in your cluster you may want to use a more &ldquo;distributed&rdquo;
-        solution. For may case I opted for NFS.
+        By default <a href="https://k3s.io/">K3S</a> comes only
+        with <a href="https://github.com/rancher/local-path-provisioner">local-path</a>
+        storage class, and if you are running with more than one node in your
+        cluster you may want to use a more &ldquo;distributed&rdquo; solution.
+        For may case I opted for NFS.
     </p>
     <p>
         To check the current storage class you can run:
@@ -16,21 +16,22 @@
     <pre><code>NAME                   PROVISIONER                                     RECLAIMPOLICY   VOLUMEBINDINGMODE      ALLOWVOLUMEEXPANSION   AGE
 local-path (default)   rancher.io/local-path                           Delete          WaitForFirstConsumer   false                  154d</code></pre>
     <p>
-        To start adding First you need to install <a href="https://github.com/helm/helm">helm</a> on your server. To do
-        so you may
-        run:
+        To start adding First you need to
+        install <a href="https://github.com/helm/helm">helm</a> on your server.
+        To do so you may run:
     </p>
 
     <pre><code>curl -sSL https://raw.githubusercontent.com/helm/helm/master/scripts/get-helm-3 | bash</code></pre>
     <p>
-        Be careful when running scripts directly into bash always check the source
-        Sometimes is also recommended to do not pipe directly to bash
+        Be careful when running scripts directly into bash always check the
+        source Sometimes is also recommended to do not pipe directly to bash
     </p>
     <p>
-        Once it is installed we need to add the <a
-            href="https://kubernetes.io/docs/concepts/storage/storage-classes/#nfs">NFS storage classes</a>. It has two
-        providers, I have chose <a href="https://github.com/kubernetes-sigs/nfs-subdir-external-provisioner">NFS Subdir
-        External Provisioner</a>.
+        Once it is installed we need to add
+        the <a href="https://kubernetes.io/docs/concepts/storage/storage-classes/#nfs">NFS
+        storage classes</a>. It has two providers, I have
+        chose <a href="https://github.com/kubernetes-sigs/nfs-subdir-external-provisioner">NFS
+        Subdir External Provisioner</a>.
     </p>
     <p>
         Add the helm repo
@@ -46,12 +47,12 @@ local-path (default)   rancher.io/local-path                           Delete
 --set nfs.path=/exported/path</code></pre>
     </div>
     <p>
-        Set the <code>nfs.server</code> and <code>nfs.path</code> accordingly with your setup.
+        Set the <code>nfs.server</code> and <code>nfs.path</code> accordingly
+        with your setup.
     </p>
-
     <p>
-        After that if we run <code>k3s kubectl get storageclasses</code> it will now print another
-        NFS provider:
+        After that if we run <code>k3s kubectl get storageclasses</code> it will
+        now print another NFS provider:
     </p>
 
     <pre><code>NAME                   PROVISIONER                                     RECLAIMPOLICY   VOLUMEBINDINGMODE      ALLOWVOLUMEEXPANSION   AGE
diff --git a/content/posts/2021-12-26K8S_private_gitlab_registry_using_podman.html b/content/posts/2021-12-28K8S_private_gitlab_registry_using_podman.html
index 470965c..470965c 100644
--- a/content/posts/2021-12-26K8S_private_gitlab_registry_using_podman.html
+++ b/content/posts/2021-12-28K8S_private_gitlab_registry_using_podman.html
diff --git a/contrib/locust/locustfile.py b/contrib/locust/locustfile.py
new file mode 100644
index 0000000..ca7f8f3
--- /dev/null
+++ b/contrib/locust/locustfile.py
@@ -0,0 +1,18 @@
+from locust import HttpUser, task
+
+class HelloWorldUser(HttpUser):
+    @task
+    def index(self):
+        self.client.get("/")
+
+    @task
+    def posts(self):
+        self.client.get("/posts/2021-12-28K8S_private_gitlab_registry_using_podman.html")
+        self.client.get("/posts/2021-12-26Enable_NFS_on_K3S.html")
+        self.client.get("/posts/2020-08-22Moving_from_Github_to_Gilab_pages.html")
+        self.client.get("/posts/2020-07-14Friz_box_turned_off_DHCP.html")
+        self.client.get("/posts/2020-07-12Road_to_local_K8S.html")
+        self.client.get("/posts/2019-11-16Compiling_emacs_from_source_code_on_fedora.html")
+        self.client.get("/posts/2019-04-22Automating_desktop_setup_with_ansible-pull_part-2.html")
+        self.client.get("/posts/2019-03-07Automating_desktop_setup_with_ansible-pull_part-1.html")
+        self.client.get("/posts/2019-03-03Welcome_to_my_blog.html")
diff --git a/src/blog.rs b/src/blog.rs
index e549fb2..6bbda49 100644
--- a/src/blog.rs
+++ b/src/blog.rs
@@ -3,8 +3,9 @@ use sailfish::TemplateOnce;
 use chrono::NaiveDate;
 use regex::{Regex};
 use std::str;
+use std::cmp::{PartialOrd, Ord, PartialEq, Eq};
 
-const BLOG_REGEX: &str = r"(?P<date>[\d]{4}-[\d]{2}-[\d]{2})(?P<title>[a-zA-Z0-9_]*)";
+const BLOG_REGEX: &str = r"(?P<date>[\d]{4}-[\d]{2}-[\d]{2})(?P<title>[a-zA-Z0-9-_]*)";
 
 #[derive(RustEmbed)]
 #[folder = "content/posts/"]
@@ -25,6 +26,7 @@ struct PostTemplate {
     date: String
 }
 
+#[derive(PartialEq, Eq, PartialOrd, Ord)]
 pub struct BlogEntry {
     pub title: String,
     pub datetime: NaiveDate,
@@ -46,10 +48,15 @@ impl BlogEntry {
     }
 
     pub fn read_assets() -> Vec<BlogEntry> {
-        PostAsset::iter()
+
+        let mut entries: Vec<BlogEntry> = PostAsset::iter()
             .map(|e| format!("{}", e))
             .map(|e| BlogEntry::new(&e))
-            .collect()
+            .collect();
+
+        entries.sort_by(|a, b| b.datetime.cmp(&a.datetime));
+
+        entries
     }
 }
 
diff --git a/templates/post.html b/templates/post.html
index 4e5cf9a..7e0a909 100644
--- a/templates/post.html
+++ b/templates/post.html
@@ -7,7 +7,7 @@
 <% include!("header.html"); %>
 <main class="container">
     <h2><%- title %></h2>
-    <h5>created at: <%- date %></h2>
+    <h5>Created At: <%- date %></h2>
     <%- content %>
     </section>
 </main>