| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth.
Current release - regressions:
- rtnetlink: fix rtnl_dump_ifinfo() error path
- bluetooth: remove the redundant sco_conn_put
Previous releases - regressions:
- netlink: fix false positive warning in extack during dumps
- sched: sch_fq: don't follow the fast path if Tx is behind now
- ipv6: delete temporary address if mngtmpaddr is removed or
unmanaged
- tcp: fix use-after-free of nreq in reqsk_timer_handler().
- bluetooth: fix slab-use-after-free Read in set_powered_sync
- l2tp: fix warning in l2tp_exit_net found
- eth:
- bnxt_en: fix receive ring space parameters when XDP is active
- lan78xx: fix double free issue with interrupt buffer allocation
- tg3: set coherent DMA mask bits to 31 for BCM57766 chipsets
Previous releases - always broken:
- ipmr: fix tables suspicious RCU usage
- iucv: MSG_PEEK causes memory leak in iucv_sock_destruct()
- eth:
- octeontx2-af: fix low network performance
- stmmac: dwmac-socfpga: set RX watchdog interrupt as broken
- rtase: correct the speed for RTL907XD-V1
Misc:
- some documentation fixup"
* tag 'net-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits)
ipmr: fix build with clang and DEBUG_NET disabled.
Documentation: tls_offload: fix typos and grammar
Fix spelling mistake
ipmr: fix tables suspicious RCU usage
ip6mr: fix tables suspicious RCU usage
ipmr: add debug check for mr table cleanup
selftests: rds: move test.py to TEST_FILES
net_sched: sch_fq: don't follow the fast path if Tx is behind now
tcp: Fix use-after-free of nreq in reqsk_timer_handler().
net: phy: fix phy_ethtool_set_eee() incorrectly enabling LPI
net: Comment copy_from_sockptr() explaining its behaviour
rxrpc: Improve setsockopt() handling of malformed user input
llc: Improve setsockopt() handling of malformed user input
Bluetooth: SCO: remove the redundant sco_conn_put
Bluetooth: MGMT: Fix possible deadlocks
Bluetooth: MGMT: Fix slab-use-after-free Read in set_powered_sync
bnxt_en: Unregister PTP during PCI shutdown and suspend
bnxt_en: Refactor bnxt_ptp_init()
bnxt_en: Fix receive ring space parameters when XDP is active
bnxt_en: Fix queue start to update vnic RSS table
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- replace power_supply_register_no_ws() with power_supply_register()
and a new "no_wakeup_source" field in struct power_supply_config
- constify battery info tables in the core and all drivers
- switch back to remove callback for all platform drivers
- allow power_supply_put() to be called from atomic context
- mark attribute arrays read-only after init
Power-supply drivers:
- new driver for TWL6030 and TWL6032
- rk817: improve battery capacity calibration
- misc small cleanups and fixes"
* tag 'for-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (42 commits)
power: reset: ep93xx: add AUXILIARY_BUS dependency
dt-bindings: power: reset: Convert mode-.* properties to array
power: supply: sc27xx: Fix battery detect GPIO probe
dt-bindings: power: supply: sc27xx-fg: document deprecated bat-detect-gpio
reset: keystone-reset: remove unused macros
power: supply: axp20x_battery: Use scaled iio_read_channel
power: supply: axp20x_usb_power: Use scaled iio_read_channel
power: supply: generic-adc-battery: change my gmail
power: supply: pmu_battery: Set power supply type to BATTERY
power: Switch back to struct platform_driver::remove()
power: supply: hwmon: move interface to private header
power: supply: rk817: Update battery capacity calibration
power: supply: rk817: stop updating info in suspend
power: supply: rt9471: Use IC status regfield to report real charger status
power: supply: rt9471: Fix wrong WDT function regfield declaration
dt-bindings: power/supply: qcom,pmi8998-charger: Drop incorrect "#interrupt-cells" from example
power: supply: core: mark attribute arrays as ro_after_init
power: supply: core: unexport power_supply_property_is_writeable()
power: supply: core: use device mutex wrappers
power: supply: bq27xxx: Fix registers of bq27426
...
|
|
The hid_ops struct is never modified. Mark it as const.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20241127-hid-bpf-ops-v1-1-f9e41bfa3afd@weissschuh.net
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
When phy_ethtool_set_eee_noneg() detects a change in the LPI
parameters, it attempts to update phylib state and trigger the link
to cycle so the MAC sees the updated parameters.
However, in doing so, it sets phydev->enable_tx_lpi depending on
whether the EEE configuration allows the MAC to generate LPI without
taking into account the result of negotiation.
This can be demonstrated with a 1000base-T FD interface by:
# ethtool --set-eee eno0 advertise 8 # cause EEE to be not negotiated
# ethtool --set-eee eno0 tx-lpi off
# ethtool --set-eee eno0 tx-lpi on
This results in being true, despite EEE not having been negotiated and:
# ethtool --show-eee eno0
EEE status: enabled - inactive
Tx LPI: 250 (us)
Supported EEE link modes: 100baseT/Full
1000baseT/Full
Advertised EEE link modes: 100baseT/Full
1000baseT/Full
Fix this by keeping track of whether EEE was negotiated via a new
eee_active member in struct phy_device, and include this state in
the decision whether phydev->enable_tx_lpi should be set.
Fixes: 3e43b903da04 ("net: phy: Immediately call adjust_link if only tx_lpi_enabled changes")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tErSe-005RhB-2R@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
copy_from_sockptr() has a history of misuse. Add a comment explaining that
the function follows API of copy_from_user(), i.e. returns 0 for success,
or number of bytes not copied on error.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This commit renames the alias symbol, __mod_<type>__<name>_device_table
to __mod_device_table__<type>__<name>.
This change simplifies the code slightly, as there is no longer a need
to check both the prefix and suffix.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These add a common init function for arch-specific ACPI
initialization, clean up idle states initialization in the ACPI
processor_idle driver and update quirks:
- Introduce acpi_arch_init() for architecture-specific ACPI subsystem
initialization (Miao Wang)
- Clean up Asus quirks in acpi_quirk_skip_dmi_ids[] and add a quirk
to skip I2C clients on Acer Iconia One 8 A1-840 (Hans de Goede)
- Make the ACPI processor_idle driver use acpi_idle_play_dead() for
all idle states regardless of their types (Rafael Wysocki)"
* tag 'acpi-6.13-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: introduce acpi_arch_init()
ACPI: x86: Clean up Asus entries in acpi_quirk_skip_dmi_ids[]
ACPI: x86: Add skip i2c clients quirk for Acer Iconia One 8 A1-840
ACPI: processor_idle: Use acpi_idle_play_dead() for all C-states
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull more iommufd updates from Jason Gunthorpe:
"Change the driver callback op domain_alloc_user() into two ops:
domain_alloc_paging_flags() and domain_alloc_nesting() that better
describe what the ops are expected to do.
There will be per-driver cleanup based on this going into the next
cycle via the driver trees"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommu: Rename ops->domain_alloc_user() to domain_alloc_paging_flags()
iommu: Add ops->domain_alloc_nested()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- structure optimization of few bus structures and header updates
- support for 2.0 disco spec
- amd driver updates for acp revision, refactoring code and support for
acp6.3
- soft reset support for cadence driver
* tag 'soundwire-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (24 commits)
soundwire: Minor formatting fixups in sdw.h header
soundwire: Update the includes on the sdw.h header
soundwire: cadence: clear MCP BLOCK_WAKEUP in init
soundwire: cadence: add soft-reset on startup
soundwire: intel_auxdevice: add kernel parameter for mclk divider
soundwire: mipi-disco: add support for DP0/DPn 'lane-list' property
soundwire: mipi-disco: add new properties from 2.0 spec
soundwire: mipi-disco: add comment on DP0-supported property
soundwire: mipi-disco: add support for peripheral channelprepare timeout
soundwire: mipi_disco: add support for clock-scales property
soundwire: mipi-disco: add error handling for property array read
soundwire: mipi-disco: remove DPn audio-modes
soundwire: optimize sdw_dpn_prop
soundwire: optimize sdw_dp0_prop
soundwire: optimize sdw_slave_prop
soundwire: optimize sdw_bus structure
soundwire: optimize sdw_master_prop
soundwire: optimize sdw_stream_runtime memory layout
soundwire: mipi_disco: add MIPI-specific property_read_bool() helpers
soundwire: Correct some typos in comments
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"New hardware support:
- ST STM32MP25 combophy support
- Sparx5 support for lan969x serdes and updates to driver to support
this
- NXP PTN3222 eUSB2 to USB2 redriver
- Qualcomm SAR2130P eusb2 support, QCS8300 USB DW3 and QMP USB2
support, X1E80100 QMP PCIe PHY Gen4 support, QCS615 and QCS8300 QMP
UFS PHY support and SA8775P eDP PHY support
- Rockchip rk3576 usbdp and rk3576 usb2 phy support
- Binding for Microchip ATA6561 can phy
Updates:
- Freescale driver updates from hdmi support
- Conversion of rockchip rk3228 hdmi phy binding to yaml
- Broadcom usb2-phy deprecated support dropped and USB init array
update for BCM4908
- TI USXGMII mode support in J7200
- Switch back to platform_driver::remove() subsystem update"
* tag 'phy-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (59 commits)
phy: qcom: qmp: Fix lecacy-legacy typo
phy: lan969x-serdes: add support for lan969x serdes driver
dt-bindings: phy: sparx5: document lan969x
phy: sparx5-serdes: add support for branching on chip type
phy: sparx5-serdes: add indirection layer to register macros
phy: sparx5-serdes: add function for getting the CMU index
phy: sparx5-serdes: add ops to match data
phy: sparx5-serdes: add constant for the number of CMU's
phy: sparx5-serdes: add constants to match data
phy: sparx5-serdes: add support for private match data
phy: bcm-ns-usb2: drop support for old binding variant
dt-bindings: phy: bcm-ns-usb2-phy: drop deprecated variant
dt-bindings: phy: Add QMP UFS PHY compatible for QCS8300
dt-bindings: phy: qcom: snps-eusb2: Add SAR2130P compatible
dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6561
phy: airoha: Fix REG_CSR_2L_RX{0,1}_REV0 definitions
phy: airoha: Fix REG_CSR_2L_JCPLL_SDM_HREN config in airoha_pcie_phy_init_ssc_jcpll()
phy: airoha: Fix REG_PCIE_PMA_TX_RESET config in airoha_pcie_phy_init_csr_2l()
phy: airoha: Fix REG_CSR_2L_PLL_CMN_RESERVE0 config in airoha_pcie_phy_init_clk_out()
phy: phy-rockchip-samsung-hdptx: Don't request RST_PHY/RST_ROPLL/RST_LCPLL
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New hardware support:
- Qualcomm SAR2130P GPI dma support
- Sifive PIC64GX pdma support
- Rcar r7s72100 support and associated updates
Updates:
- STM32 DMA3 updates for packing/unpacking mode and prevention of
additional xfers
- Simplification of devm_acpi_dma_controller_register() and associate
cleanup including headers
- loongson prefix renames
- Switch back to platform_driver::remove() subsystem update"
* tag 'dmaengine-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: loongson2-apb: Rename the prefix ls2x to loongson2
dt-bindings: dma: sifive pdma: Add PIC64GX to compatibles
dmaengine: fix typo in the comment
dmaengine: stm32-dma3: clamp AXI burst using match data
dmaengine: stm32-dma3: prevent LL refactoring thanks to DT configuration
dt-bindings: dma: stm32-dma3: prevent additional transfers
dmaengine: stm32-dma3: refactor HW linked-list to optimize memory accesses
dmaengine: stm32-dma3: prevent pack/unpack thanks to DT configuration
dt-bindings: dma: stm32-dma3: prevent packing/unpacking mode
dmaengine: idxd: Move DSA/IAA device IDs to IDXD driver
dt-bindings: dma: qcom,gpi: Add SAR2130P compatible
dmaengine: Switch back to struct platform_driver::remove()
dmaengine: ep93xx: Fix unsigned compared against 0
dmaengine: acpi: Clean up headers
dmaengine: acpi: Simplify devm_acpi_dma_controller_register()
dmaengine: acpi: Drop unused devm_acpi_dma_controller_free()
dmaengine: sh: rz-dmac: add r7s72100 support
dt-bindings: dma: rz-dmac: Document RZ/A1H SoC
|
|
Pull VFIO updates from Alex Williamson:
- Constify an unmodified structure used in linking vfio and kvm
(Christophe JAILLET)
- Add ID for an additional hardware SKU supported by the nvgrace-gpu
vfio-pci variant driver (Ankit Agrawal)
- Fix incorrect signed cast in QAT vfio-pci variant driver, negating
test in check_add_overflow(), though still caught by later tests
(Giovanni Cabiddu)
- Additional debugfs attributes exposed in hisi_acc vfio-pci variant
driver for migration debugging (Longfang Liu)
- Migration support is added to the virtio vfio-pci variant driver,
becoming the primary feature of the driver while retaining emulation
of virtio legacy support as a secondary option (Yishai Hadas)
- Fixes to a few unwind flows in the mlx5 vfio-pci driver discovered
through reviews of the virtio variant driver (Yishai Hadas)
- Fix an unlikely issue where a PCI device exposed to userspace with an
unknown capability at the base of the extended capability chain can
overflow an array index (Avihai Horon)
* tag 'vfio-v6.13-rc1' of https://github.com/awilliam/linux-vfio:
vfio/pci: Properly hide first-in-list PCIe extended capability
vfio/mlx5: Fix unwind flows in mlx5vf_pci_save/resume_device_data()
vfio/mlx5: Fix an unwind issue in mlx5vf_add_migration_pages()
vfio/virtio: Enable live migration once VIRTIO_PCI was configured
vfio/virtio: Add PRE_COPY support for live migration
vfio/virtio: Add support for the basic live migration functionality
virtio-pci: Introduce APIs to execute device parts admin commands
virtio: Manage device and driver capabilities via the admin commands
virtio: Extend the admin command to include the result size
virtio_pci: Introduce device parts access commands
Documentation: add debugfs description for hisi migration
hisi_acc_vfio_pci: register debugfs for hisilicon migration driver
hisi_acc_vfio_pci: create subfunction for data reading
hisi_acc_vfio_pci: extract public functions for container_of
vfio/qat: fix overflow check in qat_vf_resume_write()
vfio/nvgrace-gpu: Add a new GH200 SKU to the devid table
kvm/vfio: Constify struct kvm_device_ops
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-v updates from Palmer Dabbelt:
- Support for pointer masking in userspace
- Support for probing vector misaligned access performance
- Support for qspinlock on systems with Zacas and Zabha
* tag 'riscv-for-linus-6.13-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (38 commits)
RISC-V: Remove unnecessary include from compat.h
riscv: Fix default misaligned access trap
riscv: Add qspinlock support
dt-bindings: riscv: Add Ziccrse ISA extension description
riscv: Add ISA extension parsing for Ziccrse
asm-generic: ticket-lock: Add separate ticket-lock.h
asm-generic: ticket-lock: Reuse arch_spinlock_t of qspinlock
riscv: Implement xchg8/16() using Zabha
riscv: Implement arch_cmpxchg128() using Zacas
riscv: Improve zacas fully-ordered cmpxchg()
riscv: Implement cmpxchg8/16() using Zabha
dt-bindings: riscv: Add Zabha ISA extension description
riscv: Implement cmpxchg32/64() using Zacas
riscv: Do not fail to build on byte/halfword operations with Zawrs
riscv: Move cpufeature.h macros into their own header
KVM: riscv: selftests: Add Smnpm and Ssnpm to get-reg-list test
RISC-V: KVM: Allow Smnpm and Ssnpm extensions for guests
riscv: hwprobe: Export the Supm ISA extension
riscv: selftests: Add a pointer masking test
riscv: Allow ptrace control of the tagged address ABI
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux into HEAD
RISC-V Paches for the 6.13 Merge Window, Part 1
* Support for pointer masking in userspace,
* Support for probing vector misaligned access performance.
* Support for qspinlock on systems with Zacas and Zabha.
|
|
Add GPIO support to the simple helpers for the I2C OF component prober.
Components that the prober intends to probe likely require their
regulator supplies be enabled, and GPIOs be toggled to enable them or
bring them out of reset before they will respond to probe attempts.
Regulator supplies were handled in the previous patch.
The assumption is that the same class of components to be probed are
always connected in the same fashion with the same regulator supply
and GPIO. The names may vary due to binding differences, but the
physical layout does not change.
This supports at most one GPIO pin. The user must specify the GPIO name,
the polarity, and the amount of time to wait after the GPIO is toggled.
Devices with more than one GPIO pin likely require specific power
sequencing beyond what generic code can easily support.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Add helpers to do regulator management for the I2C OF component prober.
Components that the prober intends to probe likely require their
regulator supplies be enabled, and GPIOs be toggled to enable them or
bring them out of reset before they will respond to probe attempts.
GPIOs will be handled in the next patch.
The assumption is that the same class of components to be probed are
always connected in the same fashion with the same regulator supply
and GPIO. The names may vary due to binding differences, but the
physical layout does not change.
This set of helpers supports at most one regulator supply. The user
must specify the node from which the supply is retrieved. The supply
name and the amount of time to wait after the supply is enabled are
also given by the user.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Some devices are designed and manufactured with some components having
multiple drop-in replacement options. These components are often
connected to the mainboard via ribbon cables, having the same signals
and pin assignments across all options. These may include the display
panel and touchscreen on laptops and tablets, and the trackpad on
laptops. Sometimes which component option is used in a particular device
can be detected by some firmware provided identifier, other times that
information is not available, and the kernel has to try to probe each
device.
This change attempts to make the "probe each device" case cleaner. The
current approach is to have all options added and enabled in the device
tree. The kernel would then bind each device and run each driver's probe
function. This works, but has been broken before due to the introduction
of asynchronous probing, causing multiple instances requesting "shared"
resources, such as pinmuxes, GPIO pins, interrupt lines, at the same
time, with only one instance succeeding. Work arounds for these include
moving the pinmux to the parent I2C controller, using GPIO hogs or
pinmux settings to keep the GPIO pins in some fixed configuration, and
requesting the interrupt line very late. Such configurations can be seen
on the MT8183 Krane Chromebook tablets, and the Qualcomm sc8280xp-based
Lenovo Thinkpad 13S.
Instead of this delicate dance between drivers and device tree quirks,
this change introduces a simple I2C component probe function. For a
given class of devices on the same I2C bus, it will go through all of
them, doing a simple I2C read transfer and see which one of them responds.
It will then enable the device that responds.
This requires some minor modifications in the existing device tree. The
status for all the device nodes for the component options must be set
to "fail-needs-probe". This makes it clear that some mechanism is
needed to enable one of them, and also prevents the prober and device
drivers running at the same time.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
There are cases where drivers would go through child device nodes and
operate on only the ones whose node name starts with a given prefix.
Provide a helper for these users. This will mainly be used in a
subsequent patch that implements a hardware component prober for I2C
busses.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Add a helper function to add string property updates to an OF changeset.
This is similar to of_changeset_add_prop_string(), but instead of adding
the property (and failing if it exists), it will update the property.
This shall be used later in the DT hardware prober.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"Core:
- avoid possible deadlock on probe
- ensured preferred address is used on hot-join
Drivers:
- dw: add AMD I3C controller support
- mipi-i3c-hci: fix SETDASA, DMA interrupts fixes
- svc: many fixes for IBI and hotjoin"
* tag 'i3c/for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: Use i3cdev->desc->info instead of calling i3c_device_get_info() to avoid deadlock
i3c: mipi-i3c-hci: Support SETDASA CCC
i3c: dw: Add quirk to address OD/PP timing issue on AMD platform
i3c: dw: Add support for AMDI0015 ACPI ID
i3c: master: svc: Modify enabled_events bit 7:0 to act as IBI enable counter
i3c: Document I3C_ADDR_SLOT_EXT_STATUS_MASK
i3c: master: svc: Fix pm_runtime_set_suspended() with runtime pm enabled
i3c: mipi-i3c-hci: Handle interrupts according to current specifications
i3c: mipi-i3c-hci: Mask ring interrupts before ring stop request
i3c: master: Fix miss free init_dyn_addr at i3c_master_put_i3c_addrs()
i3c: master: Remove i3c_dev_disable_ibi_locked(olddev) on device hotjoin
i3c: master: svc: fix possible assignment of the same address to two devices
i3c: master: svc: wait for Manual ACK/NACK Done before next step
i3c: master: svc: use spin_lock_irqsave at svc_i3c_master_ibi_work()
i3c: master: svc: need check IBIWON for dynamic address assignment
i3c: master: svc: manually emit NACK/ACK for hotjoin
i3c: master: svc: use repeat start when IBI WIN happens
i3c: master: Fix dynamic address leak when 'assigned-address' is present
i3c: master: Extend address status bit to 4 and add I3C_ADDR_SLOT_EXT_DESIRED
i3c: master: Replace hard code 2 with macro I3C_ADDR_SLOT_STATUS_BITS
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Make pci_stop_dev() and pci_destroy_dev() safe so concurrent
callers can't stop a device multiple times, even as we migrate from
the global pci_rescan_remove_lock to finer-grained locking (Keith
Busch)
- Improve pci_walk_bus() implementation by making it recursive and
moving locking up to avoid need for a 'locked' parameter (Keith
Busch)
- Unexport pci_walk_bus_locked(), which is only used internally by
the PCI core (Keith Busch)
- Detect some Thunderbolt chips that are built-in and hence
'trustworthy' by a heuristic since the 'ExternalFacingPort' and
'usb4-host-interface' ACPI properties are not quite enough (Esther
Shimanovich)
Resource management:
- Use PCI bus addresses (not CPU addresses) in 'ranges' properties
when building dynamic DT nodes so systems where PCI and CPU
addresses differ work correctly (Andrea della Porta)
- Tidy resource sizing and assignment with helpers to reduce
redundancy (Ilpo Järvinen)
- Improve pdev_sort_resources() 'bogus alignment' warning to be more
specific (Ilpo Järvinen)
Driver binding:
- Convert driver .remove_new() callbacks to .remove() again to finish
the conversion from returning 'int' to being 'void' (Sergio
Paracuellos)
- Export pcim_request_all_regions(), a managed interface to request
all BARs (Philipp Stanner)
- Replace pcim_iomap_regions_request_all() with
pcim_request_all_regions(), and pcim_iomap_table()[n] with
pcim_iomap(n), in the following drivers: ahci, crypto qat, crypto
octeontx2, intel_th, iwlwifi, ntb idt, serial rp2, ALSA korg1212
(Philipp Stanner)
- Remove the now unused pcim_iomap_regions_request_all() (Philipp
Stanner)
- Export pcim_iounmap_region(), a managed interface to unmap and
release a PCI BAR (Philipp Stanner)
- Replace pcim_iomap_regions(mask) with pcim_iomap_region(n), and
pcim_iounmap_regions(mask) with pcim_iounmap_region(n), in the
following drivers: fpga dfl-pci, block mtip32xx, gpio-merrifield,
cavium (Philipp Stanner)
Error handling:
- Add sysfs 'reset_subordinate' to reset the entire hierarchy below a
bridge; previously Secondary Bus Reset could only be used when
there was a single device below a bridge (Keith Busch)
- Warn if we reset a running device where the driver didn't register
pci_error_handlers notification callbacks (Keith Busch)
ASPM:
- Disable ASPM L1 before touching L1 PM Substates to follow the spec
closer and avoid a CPU load timeout on some platforms (Ajay
Agarwal)
- Set devices below Intel VMD to D0 before enabling ASPM L1 Substates
as required per spec for all L1 Substates changes (Jian-Hong Pan)
Power management:
- Enable starfive controller runtime PM before probing host bridge
(Mayank Rana)
- Enable runtime power management for host bridges (Krishna chaitanya
chundru)
Power control:
- Use of_platform_device_create() instead of of_platform_populate()
to create pwrctl platform devices so we can control it based on the
child nodes (Manivannan Sadhasivam)
- Create pwrctrl platform devices only if there's a relevant power
supply property (Manivannan Sadhasivam)
- Add device link from the pwrctl supplier to the PCI dev to ensure
pwrctl drivers are probed before the PCI dev driver; this avoids a
race where pwrctl could change device power state while the PCI
driver was active (Manivannan Sadhasivam)
- Find pwrctl device for removal with of_find_device_by_node()
instead of searching all children of the parent (Manivannan
Sadhasivam)
- Rename 'pwrctl' to 'pwrctrl' to match new bandwidth controller
('bwctrl') and hotplug files (Bjorn Helgaas)
Bandwidth control:
- Add read/modify/write locking for Link Control 2, which is used to
manage Link speed (Ilpo Järvinen)
- Extract Link Bandwidth Management Status check into
pcie_lbms_seen(), where it can be shared between the bandwidth
controller and quirks that use it to help retrain failed links
(Ilpo Järvinen)
- Re-add Link Bandwidth notification support with updates to address
the reasons it was previously reverted (Alexandru Gagniuc, Ilpo
Järvinen)
- Add pcie_set_target_speed() and related functionality so drivers
can manage PCIe Link speed based on thermal or other constraints
(Ilpo Järvinen)
- Add a thermal cooling driver to throttle PCIe Links via the
existing thermal management framework (Ilpo Järvinen)
- Add a userspace selftest for the PCIe bandwidth controller (Ilpo
Järvinen)
PCI device hotplug:
- Add hotplug controller driver for Marvell OCTEON multi-function
device where function 0 has a management console interface to
enable/disable and provision various personalities for the other
functions (Shijith Thotton)
- Retain a reference to the pci_bus for the lifetime of a pci_slot to
avoid a use-after-free when the thunderbolt driver resets USB4 host
routers on boot, causing hotplug remove/add of downstream docks or
other devices (Lukas Wunner)
- Remove unused cpcihp struct cpci_hp_controller_ops.hardware_test
(Guilherme Giacomo Simoes)
- Remove unused cpqphp struct ctrl_dbg.ctrl (Christophe JAILLET)
- Use pci_bus_read_dev_vendor_id() instead of hand-coded presence
detection in cpqphp (Ilpo Järvinen)
- Simplify cpqphp enumeration, which is already simple-minded and
doesn't handle devices below hot-added bridges (Ilpo Järvinen)
Virtualization:
- Add ACS quirk for Wangxun FF5xxx NICs, which don't advertise an ACS
capability but do isolate functions as though PCI_ACS_RR and
PCI_ACS_CR were set, so the functions can be in independent IOMMU
groups (Mengyuan Lou)
TLP Processing Hints (TPH):
- Add and document TLP Processing Hints (TPH) support so drivers can
enable and disable TPH and the kernel can save/restore TPH
configuration (Wei Huang)
- Add TPH Steering Tag support so drivers can retrieve Steering Tag
values associated with specific CPUs via an ACPI _DSM to improve
performance by directing DMA writes closer to their consumers (Wei
Huang)
Data Object Exchange (DOE):
- Wait up to 1 second for DOE Busy bit to clear before writing a
request to the mailbox to avoid failures if the mailbox is still
busy from a previous transfer (Gregory Price)
Endpoint framework:
- Skip attempts to allocate from endpoint controller memory window if
the requested size is larger than the window (Damien Le Moal)
- Add and document pci_epc_mem_map() and pci_epc_mem_unmap() to
handle controller-specific size and alignment constraints, and add
test cases to the endpoint test driver (Damien Le Moal)
- Implement dwc pci_epc_ops.align_addr() so pci_epc_mem_map() can
observe DWC-specific alignment requirements (Damien Le Moal)
- Synchronously cancel command handler work in endpoint test before
cleaning up DMA and BARs (Damien Le Moal)
- Respect endpoint page size in dw_pcie_ep_align_addr() (Niklas
Cassel)
- Use dw_pcie_ep_align_addr() in dw_pcie_ep_raise_msi_irq() and
dw_pcie_ep_raise_msix_irq() instead of open coding the equivalent
(Niklas Cassel)
- Avoid NULL dereference if Modem Host Interface Endpoint lacks
'mmio' DT property (Zhongqiu Han)
- Release PCI domain ID of Endpoint controller parent (not controller
itself) and before unregistering the controller, to avoid
use-after-free (Zijun Hu)
- Clear secondary (not primary) EPC in pci_epc_remove_epf() when
removing the secondary controller associated with an NTB (Zijun Hu)
Cadence PCIe controller driver:
- Lower severity of 'phy-names' message (Bartosz Wawrzyniak)
Freescale i.MX6 PCIe controller driver:
- Fix suspend/resume support on i.MX6QDL, which has a hardware
erratum that prevents use of L2 (Stefan Eichenberger)
Intel VMD host bridge driver:
- Add 0xb60b and 0xb06f Device IDs for client SKUs (Nirmal Patel)
MediaTek PCIe Gen3 controller driver:
- Update mediatek-gen3 DT binding to require the exact number of
clocks for each SoC (Fei Shao)
- Add support for DT 'max-link-speed' and 'num-lanes' properties to
restrict the link speed and width (AngeloGioacchino Del Regno)
Microchip PolarFlare PCIe controller driver:
- Add DT and driver support for using either of the two PolarFire
Root Ports (Conor Dooley)
NVIDIA Tegra194 PCIe controller driver:
- Move endpoint controller cleanups that depend on refclk from the
host to the notifier that tells us the host has deasserted PERST#,
when refclk should be valid (Manivannan Sadhasivam)
Qualcomm PCIe controller driver:
- Add qcom SAR2130P DT binding with an additional clock (Dmitry
Baryshkov)
- Enable MSI interrupts if 'global' IRQ is supported, since a
previous commit unintentionally masked them (Manivannan Sadhasivam)
- Move endpoint controller cleanups that depend on refclk from the
host to the notifier that tells us the host has deasserted PERST#,
when refclk should be valid (Manivannan Sadhasivam)
- Add DT binding and driver support for IPQ9574, with Synopsys IP
v5.80a and Qcom IP 1.27.0 (devi priya)
- Move the OPP "operating-points-v2" table from the
qcom,pcie-sm8450.yaml DT binding to qcom,pcie-common.yaml, where it
can be used by other Qcom platforms (Qiang Yu)
- Add 'global' SPI interrupt for events like link-up, link-down to
qcom,pcie-x1e80100 DT binding so we can start enumeration when the
link comes up (Qiang Yu)
- Disable ASPM L0s for qcom,pcie-x1e80100 since the PHY is not tuned
to support this (Qiang Yu)
- Add ops_1_21_0 for SC8280X family SoC, which doesn't use the
'iommu-map' DT property and doesn't need BDF-to-SID translation
(Qiang Yu)
Rockchip PCIe controller driver:
- Define ROCKCHIP_PCIE_AT_SIZE_ALIGN to replace magic 256 endpoint
.align value (Damien Le Moal)
- When unmapping an endpoint window, compute the region index instead
of searching for it, and verify that the address was mapped (Damien
Le Moal)
- When mapping an endpoint window, verify that the address hasn't
been mapped already (Damien Le Moal)
- Implement pci_epc_ops.align_addr() for rockchip-ep (Damien Le Moal)
- Fix MSI IRQ data mapping to observe the alignment constraint, which
fixes intermittent page faults in memcpy_toio() and memcpy_fromio()
(Damien Le Moal)
- Rename rockchip_pcie_parse_ep_dt() to
rockchip_pcie_ep_get_resources() for consistency with similar DT
interfaces (Damien Le Moal)
- Skip the unnecessary link train in rockchip_pcie_ep_probe() and do
it only in the endpoint start operation (Damien Le Moal)
- Implement pci_epc_ops.stop_link() to disable link training and
controller configuration (Damien Le Moal)
- Attempt link training at 5 GT/s when both partners support it
(Damien Le Moal)
- Add a handler for PERST# signal so we can detect host-initiated
resets and start link training after PERST# is deasserted (Damien
Le Moal)
Synopsys DesignWare PCIe controller driver:
- Clear outbound address on unmap so dw_pcie_find_index() won't match
an ATU index that was already unmapped (Damien Le Moal)
- Use of_property_present() instead of of_property_read_bool() when
testing for presence of non-boolean DT properties (Rob Herring)
- Advertise 1MB size if endpoint supports Resizable BARs, which was
inadvertently lost in v6.11 (Niklas Cassel)
TI J721E PCIe driver:
- Add PCIe support for J722S SoC (Siddharth Vadapalli)
- Delay PCIE_T_PVPERL_MS (100 ms), not just PCIE_T_PERST_CLK_US (100
us), before deasserting PERST# to ensure power and refclk are
stable (Siddharth Vadapalli)
TI Keystone PCIe controller driver:
- Set the 'ti,keystone-pcie' mode so v3.65a devices work in Root
Complex mode (Kishon Vijay Abraham I)
- Try to avoid unrecoverable SError for attempts to issue config
transactions when the link is down; this is racy but the best we
can do (Kishon Vijay Abraham I)
Miscellaneous:
- Reorganize kerneldoc parameter names to match order in function
signature (Julia Lawall)
- Fix sysfs reset_method_store() memory leak (Todd Kjos)
- Simplify pci_create_slot() (Ilpo Järvinen)
- Fix incorrect printf format specifiers in pcitest (Luo Yifan)"
* tag 'pci-v6.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (127 commits)
PCI: rockchip-ep: Handle PERST# signal in EP mode
PCI: rockchip-ep: Improve link training
PCI: rockship-ep: Implement the pci_epc_ops::stop_link() operation
PCI: rockchip-ep: Refactor endpoint link training enable
PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() MSI-X hiding
PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() memory allocations
PCI: rockchip-ep: Rename rockchip_pcie_parse_ep_dt()
PCI: rockchip-ep: Fix MSI IRQ data mapping
PCI: rockchip-ep: Implement the pci_epc_ops::align_addr() operation
PCI: rockchip-ep: Improve rockchip_pcie_ep_map_addr()
PCI: rockchip-ep: Improve rockchip_pcie_ep_unmap_addr()
PCI: rockchip-ep: Use a macro to define EP controller .align feature
PCI: rockchip-ep: Fix address translation unit programming
PCI/pwrctrl: Rename pwrctrl functions and structures
PCI/pwrctrl: Rename pwrctl files to pwrctrl
PCI/pwrctl: Remove pwrctl device without iterating over all children of pwrctl parent
PCI/pwrctl: Ensure that pwrctl drivers are probed before PCI client drivers
PCI/pwrctl: Create pwrctl device only if at least one power supply is present
PCI/pwrctl: Use of_platform_device_create() to create pwrctl devices
tools: PCI: Fix incorrect printf format specifiers
...
|
|
Commit b1fca27d384e ("kernel debug: support resetting WARN*_ONCE")
added support for clearing the state of once warnings. However,
it is not functional when CONFIG_LD_DEAD_CODE_DATA_ELIMINATION or
CONFIG_LTO_CLANG is enabled, because .data.once matches the
.data.[0-9a-zA-Z_]* pattern in the DATA_MAIN macro.
Commit cb87481ee89d ("kbuild: linker script do not match C names unless
LD_DEAD_CODE_DATA_ELIMINATION is configured") was introduced to suppress
the issue for the default CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=n case,
providing a minimal fix for stable backporting. We were aware this did
not address the issue for CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=y. The
plan was to apply correct fixes and then revert cb87481ee89d. [1]
Seven years have passed since then, yet the #ifdef workaround remains in
place. Meanwhile, commit b1fca27d384e introduced the .data.once section,
and commit dc5723b02e52 ("kbuild: add support for Clang LTO") extended
the #ifdef.
Using a ".." separator in the section name fixes the issue for
CONFIG_LD_DEAD_CODE_DATA_ELIMINATION and CONFIG_LTO_CLANG.
[1]: https://lore.kernel.org/linux-kbuild/CAK7LNASck6BfdLnESxXUeECYL26yUDm0cwRZuM4gmaWUkxjL5g@mail.gmail.com/
Fixes: b1fca27d384e ("kernel debug: support resetting WARN*_ONCE")
Fixes: dc5723b02e52 ("kbuild: add support for Clang LTO")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Commit 7ccaba5314ca ("consolidate WARN_...ONCE() static variables")
was intended to collect all .data.unlikely sections into one chunk.
However, this has not worked when CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
or CONFIG_LTO_CLANG is enabled, because .data.unlikely matches the
.data.[0-9a-zA-Z_]* pattern in the DATA_MAIN macro.
Commit cb87481ee89d ("kbuild: linker script do not match C names unless
LD_DEAD_CODE_DATA_ELIMINATION is configured") was introduced to suppress
the issue for the default CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=n case,
providing a minimal fix for stable backporting. We were aware this did
not address the issue for CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=y. The
plan was to apply correct fixes and then revert cb87481ee89d. [1]
Seven years have passed since then, yet the #ifdef workaround remains in
place.
Using a ".." separator in the section name fixes the issue for
CONFIG_LD_DEAD_CODE_DATA_ELIMINATION and CONFIG_LTO_CLANG.
[1]: https://lore.kernel.org/linux-kbuild/CAK7LNASck6BfdLnESxXUeECYL26yUDm0cwRZuM4gmaWUkxjL5g@mail.gmail.com/
Fixes: cb87481ee89d ("kbuild: linker script do not match C names unless LD_DEAD_CODE_DATA_ELIMINATION is configured")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Add the build support for using Clang's Propeller optimizer. Like
AutoFDO, Propeller uses hardware sampling to gather information
about the frequency of execution of different code paths within a
binary. This information is then used to guide the compiler's
optimization decisions, resulting in a more efficient binary.
The support requires a Clang compiler LLVM 19 or later, and the
create_llvm_prof tool
(https://github.com/google/autofdo/releases/tag/v0.30.1). This
commit is limited to x86 platforms that support PMU features
like LBR on Intel machines and AMD Zen3 BRS.
Here is an example workflow for building an AutoFDO+Propeller
optimized kernel:
1) Build the kernel on the host machine, with AutoFDO and Propeller
build config
CONFIG_AUTOFDO_CLANG=y
CONFIG_PROPELLER_CLANG=y
then
$ make LLVM=1 CLANG_AUTOFDO_PROFILE=<autofdo_profile>
“<autofdo_profile>” is the profile collected when doing a non-Propeller
AutoFDO build. This step builds a kernel that has the same optimization
level as AutoFDO, plus a metadata section that records basic block
information. This kernel image runs as fast as an AutoFDO optimized
kernel.
2) Install the kernel on test/production machines.
3) Run the load tests. The '-c' option in perf specifies the sample
event period. We suggest using a suitable prime number,
like 500009, for this purpose.
For Intel platforms:
$ perf record -e BR_INST_RETIRED.NEAR_TAKEN:k -a -N -b -c <count> \
-o <perf_file> -- <loadtest>
For AMD platforms:
The supported system are: Zen3 with BRS, or Zen4 with amd_lbr_v2
# To see if Zen3 support LBR:
$ cat proc/cpuinfo | grep " brs"
# To see if Zen4 support LBR:
$ cat proc/cpuinfo | grep amd_lbr_v2
# If the result is yes, then collect the profile using:
$ perf record --pfm-events RETIRED_TAKEN_BRANCH_INSTRUCTIONS:k -a \
-N -b -c <count> -o <perf_file> -- <loadtest>
4) (Optional) Download the raw perf file to the host machine.
5) Generate Propeller profile:
$ create_llvm_prof --binary=<vmlinux> --profile=<perf_file> \
--format=propeller --propeller_output_module_name \
--out=<propeller_profile_prefix>_cc_profile.txt \
--propeller_symorder=<propeller_profile_prefix>_ld_profile.txt
“create_llvm_prof” is the profile conversion tool, and a prebuilt
binary for linux can be found on
https://github.com/google/autofdo/releases/tag/v0.30.1 (can also build
from source).
"<propeller_profile_prefix>" can be something like
"/home/user/dir/any_string".
This command generates a pair of Propeller profiles:
"<propeller_profile_prefix>_cc_profile.txt" and
"<propeller_profile_prefix>_ld_profile.txt".
6) Rebuild the kernel using the AutoFDO and Propeller profile files.
CONFIG_AUTOFDO_CLANG=y
CONFIG_PROPELLER_CLANG=y
and
$ make LLVM=1 CLANG_AUTOFDO_PROFILE=<autofdo_profile> \
CLANG_PROPELLER_PROFILE_PREFIX=<propeller_profile_prefix>
Co-developed-by: Han Shen <shenhan@google.com>
Signed-off-by: Han Shen <shenhan@google.com>
Signed-off-by: Rong Xu <xur@google.com>
Suggested-by: Sriraman Tallam <tmsriram@google.com>
Suggested-by: Krzysztof Pszeniczny <kpszeniczny@google.com>
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Suggested-by: Stephane Eranian <eranian@google.com>
Tested-by: Yonghong Song <yonghong.song@linux.dev>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Enable the machine function split optimization for AutoFDO in Clang.
Machine function split (MFS) is a pass in the Clang compiler that
splits a function into hot and cold parts. The linker groups all
cold blocks across functions together. This decreases hot code
fragmentation and improves iCache and iTLB utilization.
MFS requires a profile so this is enabled only for the AutoFDO builds.
Co-developed-by: Han Shen <shenhan@google.com>
Signed-off-by: Han Shen <shenhan@google.com>
Signed-off-by: Rong Xu <xur@google.com>
Suggested-by: Sriraman Tallam <tmsriram@google.com>
Suggested-by: Krzysztof Pszeniczny <kpszeniczny@google.com>
Tested-by: Yonghong Song <yonghong.song@linux.dev>
Tested-by: Yabin Cui <yabinc@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Enable -ffunction-sections by default for the AutoFDO build.
With -ffunction-sections, the compiler places each function in its own
section named .text.function_name instead of placing all functions in
the .text section. In the AutoFDO build, this allows the linker to
utilize profile information to reorganize functions for improved
utilization of iCache and iTLB.
Co-developed-by: Han Shen <shenhan@google.com>
Signed-off-by: Han Shen <shenhan@google.com>
Signed-off-by: Rong Xu <xur@google.com>
Suggested-by: Sriraman Tallam <tmsriram@google.com>
Tested-by: Yonghong Song <yonghong.song@linux.dev>
Tested-by: Yabin Cui <yabinc@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Add markers like __hot_text_start, __hot_text_end, __unlikely_text_start,
and __unlikely_text_end which will be included in System.map. These markers
indicate how the compiler groups functions, providing valuable information
to developers about the layout and optimization of the code.
Co-developed-by: Han Shen <shenhan@google.com>
Signed-off-by: Han Shen <shenhan@google.com>
Signed-off-by: Rong Xu <xur@google.com>
Suggested-by: Sriraman Tallam <tmsriram@google.com>
Tested-by: Yonghong Song <yonghong.song@linux.dev>
Tested-by: Yabin Cui <yabinc@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
When the -ffunction-sections compiler option is enabled, each function
is placed in a separate section named .text.function_name rather than
putting all functions in a single .text section.
However, using -function-sections can cause problems with the
linker script. The comments included in include/asm-generic/vmlinux.lds.h
note these issues.:
“TEXT_MAIN here will match .text.fixup and .text.unlikely if dead
code elimination is enabled, so these sections should be converted
to use ".." first.”
It is unclear whether there is a straightforward method for converting
a suffix to "..".
This patch modifies the order of subsections within the text output
section. Specifically, it changes current order:
.text.hot, .text, .text_unlikely, .text.unknown, .text.asan
to the new order:
.text.asan, .text.unknown, .text_unlikely, .text.hot, .text
Here is the rationale behind the new layout:
The majority of the code resides in three sections: .text.hot, .text,
and .text.unlikely, with .text.unknown containing a negligible amount.
.text.asan is only generated in ASAN builds.
The primary goal is to group code segments based on their execution
frequency (hotness).
First, we want to place .text.hot adjacent to .text. Since we cannot put
.text.hot after .text (Due to constraints with -ffunction-sections,
placing .text.hot after .text is problematic), we need to put
.text.hot before .text.
Then it comes to .text.unlikely, we cannot put it after .text (same
-ffunction-sections issue) . Therefore, we position .text.unlikely
before .text.hot.
.text.unknown and .tex.asan follow the same logic.
This revised ordering effectively reverses the original arrangement (for
.text.unlikely, .text.unknown, and .tex.asan), maintaining a similar level
of affinity between sections.
It also places .text.hot section at the beginning of a page to better
utilize the TLB entry.
Note that the limitation arises because the linker script employs glob
patterns instead of regular expressions for string matching. While there
is a method to maintain the current order using complex patterns, this
significantly complicates the pattern and increases the likelihood of
errors.
This patch also changes vmlinux.lds.S for the sparc64 architecture to
accommodate specific symbol placement requirements.
Co-developed-by: Han Shen <shenhan@google.com>
Signed-off-by: Han Shen <shenhan@google.com>
Signed-off-by: Rong Xu <xur@google.com>
Suggested-by: Sriraman Tallam <tmsriram@google.com>
Suggested-by: Krzysztof Pszeniczny <kpszeniczny@google.com>
Tested-by: Yonghong Song <yonghong.song@linux.dev>
Tested-by: Yabin Cui <yabinc@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs exportfs updates from Christian Brauner:
"This contains work to bring NFS connectable file handles to userspace
servers.
The name_to_handle_at() system call is extended to encode connectable
file handles. Such file handles can be resolved to an open file with a
connected path. So far userspace NFS servers couldn't make use of this
functionality even though the kernel does already support it. This is
achieved by introducing a new flag for name_to_handle_at().
Similarly, the open_by_handle_at() system call is tought to understand
connectable file handles explicitly created via name_to_handle_at()"
* tag 'vfs-6.13.exportfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: open_by_handle_at() support for decoding "explicit connectable" file handles
fs: name_to_handle_at() support for "explicit connectable" file handles
fs: prepare for "explicit connectable" file handles
|
|
Pull nfsd updates from Chuck Lever:
"Jeff Layton contributed a scalability improvement to NFSD's NFSv4
backchannel session implementation. This improvement is intended to
increase the rate at which NFSD can safely recall NFSv4 delegations
from clients, to avoid the need to revoke them. Revoking requires a
slow state recovery process.
A wide variety of bug fixes and other incremental improvements make up
the bulk of commits in this series. As always I am grateful to the
NFSD contributors, reviewers, testers, and bug reporters who
participated during this cycle"
* tag 'nfsd-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (72 commits)
nfsd: allow for up to 32 callback session slots
nfs_common: must not hold RCU while calling nfsd_file_put_local
nfsd: get rid of include ../internal.h
nfsd: fix nfs4_openowner leak when concurrent nfsd4_open occur
NFSD: Add nfsd4_copy time-to-live
NFSD: Add a laundromat reaper for async copy state
NFSD: Block DESTROY_CLIENTID only when there are ongoing async COPY operations
NFSD: Handle an NFS4ERR_DELAY response to CB_OFFLOAD
NFSD: Free async copy information in nfsd4_cb_offload_release()
NFSD: Fix nfsd4_shutdown_copy()
NFSD: Add a tracepoint to record canceled async COPY operations
nfsd: make nfsd4_session->se_flags a bool
nfsd: remove nfsd4_session->se_bchannel
nfsd: make use of warning provided by refcount_t
nfsd: Don't fail OP_SETCLIENTID when there are too many clients.
svcrdma: fix miss destroy percpu_counter in svc_rdma_proc_init()
xdrgen: Remove program_stat_to_errno() call sites
xdrgen: Update the files included in client-side source code
xdrgen: Remove check for "nfs_ok" in C templates
xdrgen: Remove tracepoint call site
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"This series introduces a device aliasing feature where user can carve
out partitions but reclaim the space back by deleting aliased file in
root dir.
In addition to that, there're numerous minor bug fixes in zoned device
support, checkpoint=disable, extent cache management, fiemap, and
lazytime mount option. The full list of noticeable changes can be
found below.
Enhancements:
- introduce device aliasing file
- add stats in debugfs to show multiple devices
- add a sysfs node to limit max read extent count per-inode
- modify f2fs_is_checkpoint_ready logic to allow more data to be
written with the CP disable
- decrease spare area for pinned files for zoned devices
Fixes:
- Revert "f2fs: remove unreachable lazytime mount option parsing"
- adjust unusable cap before checkpoint=disable mode
- fix to drop all discards after creating snapshot on lvm device
- fix to shrink read extent node in batches
- fix changing cursegs if recovery fails on zoned device
- fix to adjust appropriate length for fiemap
- fix fiemap failure issue when page size is 16KB
- fix to avoid forcing direct write to use buffered IO on inline_data
inode
- fix to map blocks correctly for direct write
- fix to account dirty data in __get_secs_required()
- fix null-ptr-deref in f2fs_submit_page_bio()
- fix inconsistent update of i_blocks in release_compress_blocks and
reserve_compress_blocks"
* tag 'f2fs-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (40 commits)
f2fs: fix to drop all discards after creating snapshot on lvm device
f2fs: add a sysfs node to limit max read extent count per-inode
f2fs: fix to shrink read extent node in batches
f2fs: print message if fscorrupted was found in f2fs_new_node_page()
f2fs: clear SBI_POR_DOING before initing inmem curseg
f2fs: fix changing cursegs if recovery fails on zoned device
f2fs: adjust unusable cap before checkpoint=disable mode
f2fs: fix to requery extent which cross boundary of inquiry
f2fs: fix to adjust appropriate length for fiemap
f2fs: clean up w/ F2FS_{BLK_TO_BYTES,BTYES_TO_BLK}
f2fs: fix to do cast in F2FS_{BLK_TO_BYTES, BTYES_TO_BLK} to avoid overflow
f2fs: replace deprecated strcpy with strscpy
Revert "f2fs: remove unreachable lazytime mount option parsing"
f2fs: fix to avoid forcing direct write to use buffered IO on inline_data inode
f2fs: fix to map blocks correctly for direct write
f2fs: fix race in concurrent f2fs_stop_gc_thread
f2fs: fix fiemap failure issue when page size is 16KB
f2fs: remove redundant atomic file check in defragment
f2fs: fix to convert log type to segment data type correctly
f2fs: clean up the unused variable additional_reserved_segments
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Add page -> folio conversions (Joanne Koong, Josef Bacik)
- Allow max size of fuse requests to be configurable with a sysctl
(Joanne Koong)
- Allow FOPEN_DIRECT_IO to take advantage of async code path (yangyun)
- Fix large kernel reads (like a module load) in virtio_fs (Hou Tao)
- Fix attribute inconsistency in case readdirplus (and plain lookup in
corner cases) is racing with inode eviction (Zhang Tianci)
- Fix a WARN_ON triggered by virtio_fs (Asahi Lina)
* tag 'fuse-update-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (30 commits)
virtiofs: dax: remove ->writepages() callback
fuse: check attributes staleness on fuse_iget()
fuse: remove pages for requests and exclusively use folios
fuse: convert direct io to use folios
mm/writeback: add folio_mark_dirty_lock()
fuse: convert writebacks to use folios
fuse: convert retrieves to use folios
fuse: convert ioctls to use folios
fuse: convert writes (non-writeback) to use folios
fuse: convert reads to use folios
fuse: convert readdir to use folios
fuse: convert readlink to use folios
fuse: convert cuse to use folios
fuse: add support in virtio for requests using folios
fuse: support folios in struct fuse_args_pages and fuse_copy_pages()
fuse: convert fuse_notify_store to use folios
fuse: convert fuse_retrieve to use folios
fuse: use the folio based vmstat helpers
fuse: convert fuse_writepage_need_send to take a folio
fuse: convert fuse_do_readpage to use folios
...
|
|
Add speaker id check by gpio in ACPI for ASUS projects.
In other vendors, speaker id was checked by BIOS, and was applied in
last bit of subsys id, so we can load corresponding firmware binary file
for its speaker by subsys id.
But in ASUS project, the firmware binary name will be appended an extra
number to tell the speakers from different vendors. And this single digit
come from gpio level of speaker id in BIOS.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20241123073718.475-1-baojun.xu@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, lpfc, hisi_sas, st).
Amazingly enough, no core changes with the biggest set of driver
changes being ufs (which conflicted with it's own fixes a bit, hence
the merges) and the rest being minor fixes and updates"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (97 commits)
scsi: st: New session only when Unit Attention for new tape
scsi: st: Add MTIOCGET and MTLOAD to ioctls allowed after device reset
scsi: st: Don't modify unknown block number in MTIOCGET
scsi: ufs: core: Restore SM8650 support
scsi: sun3: Mark driver struct with __refdata to prevent section mismatch
scsi: sg: Enable runtime power management
scsi: qedi: Fix a possible memory leak in qedi_alloc_and_init_sb()
scsi: qedf: Fix a possible memory leak in qedf_alloc_and_init_sb()
scsi: fusion: Remove unused variable 'rc'
scsi: bfa: Fix use-after-free in bfad_im_module_exit()
scsi: esas2r: Remove unused esas2r_build_cli_req()
scsi: target: Fix incorrect function name in pscsi_create_type_disk()
scsi: ufs: Replace deprecated PCI functions
scsi: Switch back to struct platform_driver::remove()
scsi: pm8001: Increase request sg length to support 4MiB requests
scsi: pm8001: Initialize devices in pm8001_alloc_dev()
scsi: pm8001: Use module param to set pcs event log severity
scsi: ufs: ufs-mediatek: Configure individual LU queue flags
scsi: MAINTAINERS: Update UFS Exynos entry
scsi: lpfc: Copyright updates for 14.4.0.6 patches
...
|
|
The merge commit ae3325f752ef ("Merge branches 'arm/smmu', 'mediatek',
's390', 'ti/omap', 'riscv' and 'core' into next") left a stale
declaration of 'iommu_present()' even though the 'core' branch that was
merged had removed the function (and the declaration).
Remove it for real.
Reported-by: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull nvdimm and DAX updates from Ira Weiny:
"Most represent minor cleanups and code removals. One patch fixes
potential NULL pointer arithmetic which was benign because the offset
of the member was 0. Nevertheless it should be cleaned up.
- typo fixes
- clarify logic to remove potential NULL pointer math
- remove dead code"
* tag 'libnvdimm-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dax: Remove an unused field in struct dax_operations
dax: delete a stale directory pmem
nvdimm: rectify the illogical code within nd_dax_probe()
nvdimm: Correct some typos in comments
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
"Common:
- switch back from remove_new() to remove() callback
imx:
- fix format specifier
zynqmp:
- setup IPI for each child node
thead:
- Add th1520 driver and bindings
qcom:
- add SM8750 and SAR2130p compatibles
- fix expected clocks for callbacks
- use IRQF_NO_SUSPEND for cpucp
mtk-cmdq:
- switch to __pm_runtime_put_autosuspend()
- fix alloc size of clocks
mpfs:
- fix reg properties
ti-msgmgr:
- don't use of_match_ptr helper
- enable COMPILE_TEST build
pcc:
- consider the PCC_ACK_FLAG
arm_mhuv2:
- fix non-fatal improper reuse of variable"
* tag 'mailbox-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox: pcc: Check before sending MCTP PCC response ACK
mailbox: Switch back to struct platform_driver::remove()
mailbox: imx: Modify the incorrect format specifier
mailbox: arm_mhuv2: clean up loop in get_irq_chan_comb()
mailbox: zynqmp: setup IPI for each valid child node
dt-bindings: mailbox: Add thead,th1520-mailbox bindings
mailbox: Introduce support for T-head TH1520 Mailbox driver
mailbox: mtk-cmdq: fix wrong use of sizeof in cmdq_get_clocks()
dt-bindings: mailbox: qcom-ipcc: Add SM8750
dt-bindings: mailbox: qcom,apcs-kpss-global: correct expected clocks for fallbacks
dt-bindings: mailbox: qcom-ipcc: Add SAR2130P compatible
mailbox: ti-msgmgr: Allow building under COMPILE_TEST
mailbox: ti-msgmgr: Remove use of of_match_ptr() helper
mailbox: qcom-cpucp: Mark the irq with IRQF_NO_SUSPEND flag
mailbox: mtk-cmdq-mailbox: Switch to __pm_runtime_put_autosuspend()
mailbox: mpfs: support new, syscon based, devicetree configuration
dt-bindings: mailbox: mpfs: fix reg properties
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"No core changes this time.
New drivers:
- Xlinix Versal pin control driver
- Ocelot LAN969x pin control driver
- T-Head TH1520 RISC-V SoC pin control driver
- Qualcomm SM8750, IPQ5424, QCS8300, SAR2130P and QCS615 SoC pin
control drivers
- Qualcomm SM8750 LPASS (low power audio subsystem) pin control
driver
- Qualcomm PM8937 mixsig IC pin control support, GPIO and MPP
(multi-purpose-pin)
- Samsung Exynos8895 and Exynos9810 SoC pin control driver
- SpacemiT K1 SoC pin control driver
- Airhoa EN7581 IC pin control driver
Improvements:
- The Renesas subdriver now supports schmitt-trigger and open drain
pin configurations if the hardware supports it
- Support GPIOF and GPIOG banks in the Aspeed G6 SoC
- Support the DSW community in the Intel Elkhartlake SoC"
* tag 'pinctrl-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (105 commits)
pinctrl: airoha: Use unsigned long for bit search
pinctrl: k210: Undef K210_PC_DEFAULT
pinctrl: qcom: spmi: fix debugfs drive strength
pinctrl: qcom: Add sm8750 pinctrl driver
dt-bindings: pinctrl: qcom: Add sm8750 pinctrl
pinctrl: cy8c95x0: remove unneeded goto labels
pinctrl: cy8c95x0: embed iterator to the for-loop
pinctrl: cy8c95x0: Use temporary variable for struct device
pinctrl: cy8c95x0: use flexible sleeping in reset function
pinctrl: cy8c95x0: switch to using devm_regulator_get_enable()
pinctrl: cy8c95x0: Use 2-argument strscpy()
dt-bindings: pinctrl: sx150xq: allow gpio line naming
pinctrl: single: add marvell,pxa1908-padconf compatible
dt-bindings: pinctrl: pinctrl-single: add marvell,pxa1908-padconf compatible
dt-bindings: pinctrl: correct typo of description for cv1800
pinctrl: qcom: spmi-mpp: Add PM8937 compatible
dt-bindings: pinctrl: qcom,pmic-mpp: Document PM8937 compatible
pinctrl: qcom-pmic-gpio: add support for PM8937
dt-bindings: pinctrl: qcom,pmic-gpio: add PM8937
pinctrl: Use of_property_present() for non-boolean properties
...
|
|
Using scoped_guard() in the implementation of trace_##name() adds an
unnecessary level of indentation.
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Michael Jeanson <mjeanson@efficios.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Yonghong Song <yhs@fb.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: bpf@vger.kernel.org
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Jordan Rife <jrife@google.com>
Link: https://lore.kernel.org/20241125142514.2897143-1-mathieu.desnoyers@efficios.com
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- Add new slab_strict_numa boot parameter to enforce per-object memory
policies on top of slab folio policies, for systems where saving cost
of remote accesses is more important than minimizing slab allocation
overhead (Christoph Lameter)
- Fix for freeptr_offset alignment check being too strict for m68k
(Geert Uytterhoeven)
- krealloc() fixes for not violating __GFP_ZERO guarantees on
krealloc() when slub_debug (redzone and object tracking) is enabled
(Feng Tang)
- Fix a memory leak in case sysfs registration fails for a slab cache,
and also no longer fail to create the cache in that case (Hyeonggon
Yoo)
- Fix handling of detected consistency problems (due to buggy slab
user) with slub_debug enabled, so that it does not cause further list
corruption bugs (yuan.gao)
- Code cleanup and kerneldocs polishing (Zhen Lei, Vlastimil Babka)
* tag 'slab-for-6.13-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slab: Fix too strict alignment check in create_cache()
mm/slab: Allow cache creation to proceed even if sysfs registration fails
mm/slub: Avoid list corruption when removing a slab from the full list
mm/slub, kunit: Add testcase for krealloc redzone and zeroing
mm/slub: Improve redzone check and zeroing for krealloc()
mm/slub: Consider kfence case for get_orig_size()
SLUB: Add support for per object memory policies
mm, slab: add kerneldocs for common SLAB_ flags
mm/slab: remove duplicate check in create_cache()
mm/slub: Move krealloc() and related code to slub.c
mm/kasan: Don't store metadata inside kmalloc object when slub_debug_orig_size is on
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- The series "resource: A couple of cleanups" from Andy Shevchenko
performs some cleanups in the resource management code
- The series "Improve the copy of task comm" from Yafang Shao addresses
possible race-induced overflows in the management of
task_struct.comm[]
- The series "Remove unnecessary header includes from
{tools/}lib/list_sort.c" from Kuan-Wei Chiu adds some cleanups and a
small fix to the list_sort library code and to its selftest
- The series "Enhance min heap API with non-inline functions and
optimizations" also from Kuan-Wei Chiu optimizes and cleans up the
min_heap library code
- The series "nilfs2: Finish folio conversion" from Ryusuke Konishi
finishes off nilfs2's folioification
- The series "add detect count for hung tasks" from Lance Yang adds
more userspace visibility into the hung-task detector's activity
- Apart from that, singelton patches in many places - please see the
individual changelogs for details
* tag 'mm-nonmm-stable-2024-11-24-02-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (71 commits)
gdb: lx-symbols: do not error out on monolithic build
kernel/reboot: replace sprintf() with sysfs_emit()
lib: util_macros_kunit: add kunit test for util_macros.h
util_macros.h: fix/rework find_closest() macros
Improve consistency of '#error' directive messages
ocfs2: fix uninitialized value in ocfs2_file_read_iter()
hung_task: add docs for hung_task_detect_count
hung_task: add detect count for hung tasks
dma-buf: use atomic64_inc_return() in dma_buf_getfile()
fs/proc/kcore.c: fix coccinelle reported ERROR instances
resource: avoid unnecessary resource tree walking in __region_intersects()
ocfs2: remove unused errmsg function and table
ocfs2: cluster: fix a typo
lib/scatterlist: use sg_phys() helper
checkpatch: always parse orig_commit in fixes tag
nilfs2: convert metadata aops from writepage to writepages
nilfs2: convert nilfs_recovery_copy_block() to take a folio
nilfs2: convert nilfs_page_count_clean_buffers() to take a folio
nilfs2: remove nilfs_writepage
nilfs2: convert checkpoint file to be folio-based
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull rust trace event support from Steven Rostedt:
"Allow Rust code to have trace events
Trace events is a popular way to debug what is happening inside the
kernel or just to find out what is happening. Rust code is being added
to the Linux kernel but it currently does not support the tracing
infrastructure. Add support of trace events inside Rust code"
* tag 'trace-rust-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rust: jump_label: skip formatting generated file
jump_label: rust: pass a mut ptr to `static_key_count`
samples: rust: fix `rust_print` build making it a combined module
rust: add arch_static_branch
jump_label: adjust inline asm to be consistent
rust: samples: add tracepoint to Rust sample
rust: add tracepoint support
rust: add static_branch_unlikely for static_key_false
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
- Disable __counted_by in Clang < 19.1.3 (Jan Hendrik Farr)
- string_helpers: Silence output truncation warning (Bartosz
Golaszewski)
- compiler.h: Avoid needing BUILD_BUG_ON_ZERO() (Philipp Reisner)
- MAINTAINERS: Add kernel hardening keywords __counted_by{_le|_be}
(Thorsten Blum)
* tag 'hardening-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
Compiler Attributes: disable __counted_by for clang < 19.1.3
compiler.h: Fix undefined BUILD_BUG_ON_ZERO()
lib: string_helpers: silence snprintf() output truncation warning
MAINTAINERS: Add kernel hardening keywords __counted_by{_le|_be}
|
|
- Add pci_epc_function_is_valid() to avoid repeating common validation
checks (Damien Le Moal)
- Skip attempts to allocate from endpoint controller memory window if the
requested size is larger than the window (Damien Le Moal)
- Add and document pci_epc_mem_map() and pci_epc_mem_unmap() to handle
controller-specific size and alignment constraints, and add test cases to
the endpoint test driver (Damien Le Moal)
- Implement dwc pci_epc_ops.align_addr() so pci_epc_mem_map() can observe
DWC-specific alignment requirements (Damien Le Moal)
- Synchronously cancel command handler work in endpoint test before
cleaning up DMA and BARs (Damien Le Moal)
- Respect endpoint page size in dw_pcie_ep_align_addr() (Niklas Cassel)
- Use dw_pcie_ep_align_addr() in dw_pcie_ep_raise_msi_irq() and
dw_pcie_ep_raise_msix_irq() instead of open coding the equivalent (Niklas
Cassel)
- Remove superfluous 'return' from pci_epf_test_clean_dma_chan() (Wang
Jiang)
- Avoid NULL dereference if Modem Host Interface Endpoint lacks 'mmio' DT
property (Zhongqiu Han)
- Release PCI domain ID of Endpoint controller parent (not controller
itself) and before unregistering the controller, to avoid use-after-free
(Zijun Hu)
- Clear secondary (not primary) EPC in pci_epc_remove_epf() when removing
the secondary controller associated with an NTB (Zijun Hu)
- Fix pci_epc_map map_size kerneldoc (Rick Wertenbroek)
* pci/endpoint:
PCI: endpoint: Fix pci_epc_map map_size kerneldoc string
PCI: endpoint: Clear secondary (not primary) EPC in pci_epc_remove_epf()
PCI: endpoint: Fix PCI domain ID release in pci_epc_destroy()
PCI: endpoint: epf-mhi: Avoid NULL dereference if DT lacks 'mmio'
PCI: endpoint: Remove surplus return statement from pci_epf_test_clean_dma_chan()
PCI: dwc: ep: Use align addr function for dw_pcie_ep_raise_{msi,msix}_irq()
PCI: endpoint: test: Synchronously cancel command handler work
PCI: dwc: endpoint: Implement the pci_epc_ops::align_addr() operation
PCI: endpoint: test: Use pci_epc_mem_map/unmap()
PCI: endpoint: Update documentation
PCI: endpoint: Introduce pci_epc_mem_map()/unmap()
PCI: endpoint: Improve pci_epc_mem_alloc_addr()
PCI: endpoint: Introduce pci_epc_function_is_valid()
|
|
- Add and document TLP Processing Hints (TPH) support so drivers can enable
and disable TPH and the kernel can save/restore TPH configuration (Wei
Huang)
- Add TPH Steering Tag support so drivers can retrieve Steering Tag values
associated with specific CPUs via an ACPI _DSM to direct DMA writes
closer to their consumers (Wei Huang)
* pci/tph:
PCI/TPH: Add TPH documentation
PCI/TPH: Add Steering Tag support
PCI: Add TLP Processing Hints (TPH) support
|
|
- Detect some Thunderbolt chips that are built-in and hence 'trustworthy'
by a heuristic since the 'ExternalFacingPort' and 'usb4-host-interface'
ACPI properties are not quite enough (Esther Shimanovich)
* pci/thunderbolt:
PCI: Detect and trust built-in Thunderbolt chips
|
|
- Add resource_set_size() to set resource size when start has already been
set (Ilpo Järvinen)
- Add resource_set_range() helper to set both resource start and size (Ilpo
Järvinen)
- Use IS_ALIGNED() and resource_size() in quirk_s3_64M() instead of
open-coding them (Ilpo Järvinen)
- Add ALIGN_DOWN_IF_NONZERO() to avoid code duplication when distributing
resources across devices (Ilpo Järvinen)
- Improve pdev_sort_resources() warning message to be more specific (Ilpo
Järvinen)
* pci/resource:
PCI: Improve pdev_sort_resources() warning message
PCI: Add ALIGN_DOWN_IF_NONZERO() helper
PCI: Use align and resource helpers, and SZ_* in quirk_s3_64M()
PCI: Use resource_set_{range,size}() helpers
resource: Add resource set range and size helpers
|
|
- Use of_platform_device_create() instead of of_platform_populate() to
create pwrctl platform devices so we can control it based on the child
nodes (Manivannan Sadhasivam)
- Create pwrctrl platform devices only if there's a relevant power supply
property (Manivannan Sadhasivam)
- Add device link from the pwrctl supplier to the PCI dev to ensure pwrctl
drivers are probed before the PCI dev driver; this avoids a race where
pwrctl could change device power state while the PCI driver was active
(Manivannan Sadhasivam)
- Find pwrctl device for removal with of_find_device_by_node() instead of
searching all children of the parent (Manivannan Sadhasivam)
- Rename 'pwrctl' to 'pwrctrl' to use the same 'ctrl' suffix as 'bwctrl'
and other PCI files to reduce confusion (Bjorn Helgaas)
* pci/pwrctl:
PCI/pwrctrl: Rename pwrctrl functions and structures
PCI/pwrctrl: Rename pwrctl files to pwrctrl
PCI/pwrctl: Remove pwrctl device without iterating over all children of pwrctl parent
PCI/pwrctl: Ensure that pwrctl drivers are probed before PCI client drivers
PCI/pwrctl: Create pwrctl device only if at least one power supply is present
PCI/pwrctl: Use of_platform_device_create() to create pwrctl devices
# Conflicts:
# drivers/pci/bus.c
# drivers/pci/remove.c
|
|
- Make pci_stop_dev() and pci_destroy_dev() concurrent safe (Keith Busch)
- Move __pci_walk_bus() mutex up into the caller, which avoids the need for
a parameter to control locking (Keith Busch)
- Simplify __pci_walk_bus() by making it recursive (Keith Busch)
- Unexport pci_walk_bus_locked(), which is only used internally by the PCI
core (Keith Busch)
* pci/locking:
PCI: Unexport pci_walk_bus_locked()
PCI: Convert __pci_walk_bus() to be recursive
PCI: Move __pci_walk_bus() mutex to where we need it
PCI: Make pci_destroy_dev() concurrent safe
PCI: Make pci_stop_dev() concurrent safe
|
|
- Simplify pci_read_bridge_bases() logic (Ilpo Järvinen)
* pci/enumeration:
PCI: Simplify pci_read_bridge_bases() logic
PCI: Move struct pci_bus_resource into bus.c
PCI: Remove unused PCI_SUBTRACTIVE_DECODE
|
