| Age | Commit message (Collapse) | Author |
|---|
|
Export drm_plane_has_format() so that drivers can use it.
v2: add kerneldoc
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619113144.1616-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
This module displays a user friendly message when a kernel panic
occurs. It currently doesn't contain any debug information,
but that can be added later.
v2
* Use get_scanout_buffer() instead of the drm client API.
(Thomas Zimmermann)
* Add the panic reason to the panic message (Nerdopolis)
* Add an exclamation mark (Nerdopolis)
v3
* Rework the drawing functions, to write the pixels line by line and
to use the drm conversion helper to support other formats.
(Thomas Zimmermann)
v4
* Use drm_fb_r1_to_32bit for fonts (Thomas Zimmermann)
* Remove the default y to DRM_PANIC config option (Thomas Zimmermann)
* Add foreground/background color config option
* Fix the bottom lines not painted if the framebuffer height
is not a multiple of the font height.
* Automatically register the device to drm_panic, if the function
get_scanout_buffer exists. (Thomas Zimmermann)
v5
* Change the drawing API, use drm_fb_blit_from_r1() to draw the font.
* Also add drm_fb_fill() to fill area with background color.
* Add draw_pixel_xy() API for drivers that can't provide a linear buffer.
* Add a flush() callback for drivers that needs to synchronize the buffer.
* Add a void *private field, so drivers can pass private data to
draw_pixel_xy() and flush().
v6
* Fix sparse warning for panic_msg and logo.
v7
* Add select DRM_KMS_HELPER for the color conversion functions.
v8
* Register directly each plane to the panic notifier (Sima)
* Add raw_spinlock to properly handle concurrency (Sima)
* Register plane instead of device, to avoid looping through plane
list, and simplify code.
* Replace get_scanout_buffer() logic with drm_panic_set_buffer()
(Thomas Zimmermann)
* Removed the draw_pixel_xy() API, will see later if it can be added back.
v9
* Revert to using get_scanout_buffer() (Sima)
* Move get_scanout_buffer() and panic_flush() to the plane helper
functions (Thomas Zimmermann)
* Register all planes with get_scanout_buffer() to the panic notifier
* Use drm_panic_lock() to protect against race (Sima)
v10
* Move blit and fill functions back in drm_panic (Thomas Zimmermann).
* Simplify the text drawing functions.
* Use kmsg_dumper instead of panic_notifier (Sima).
v12
* Use array for map and pitch in struct drm_scanout_buffer
to support multi-planar format later. (Thomas Zimmermann)
* Better indent struct drm_scanout_buffer declaration. (Thomas Zimmermann)
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409163432.352518-3-jfalempe@redhat.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Add a new immutable plane property by which a plane can advertise
a handful of recommended plane sizes. This would be mostly exposed
by cursor planes as a slightly more capable replacement for
the DRM_CAP_CURSOR_WIDTH/HEIGHT caps, which can only declare
a one size fits all limit for the whole device.
Currently eg. amdgpu/i915/nouveau just advertize the max cursor
size via the cursor size caps. But always using the max sized
cursor can waste a surprising amount of power, so a better
strategy is desirable.
Most other drivers don't specify any cursor size at all, in
which case the ioctl code just claims that 64x64 is a great
choice. Whether that is actually true is debatable.
A poll of various compositor developers informs us that
blindly probing with setcursor/atomic ioctl to determine
suitable cursor sizes is not acceptable, thus the
introduction of the new property to supplant the cursor
size caps. The compositor will now be free to select a
more optimal cursor size from the short list of options.
Note that the reported sizes (either via the property or the
caps) make no claims about things such as plane scaling. So
these things should only really be consulted for simple
"cursor like" use cases.
Userspace consumer in the form of mutter seems ready:
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3165
v2: Try to add some docs
v3: Specify that value 0 is reserved for future use (basic idea from Jonas)
Drop the note about typical hardware (Pekka)
v4: Update the docs to indicate the list is "in order of preference"
Add a a link to the mutter MR
v5: Limit to cursors only for now (Simon)
Cc: Jonas Ådahl <jadahl@redhat.com>
Cc: Sameer Lattannavar <sameer.lattannavar@intel.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240318204408.9687-2-ville.syrjala@linux.intel.com
|
|
We will add color mgmt properties to DRM planes in the next patches and
we want to track when one of this properties change to define atomic
commit behaviors. Using a similar approach from CRTC color props, we set
a color_mgmt_changed boolean whenever a plane color prop changes.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit e50e5fed41c7eed2db4119645bf3480ec43fec11.
Although the Solid Fill planes patchset got all reviews and
acknowledgements, it doesn't fulfill requirements for the new uABI. It
has neither corresponding open-source userspace implementation nor the
IGT tests coverage. Reverting this patchset until userspace obligations
are fulfilled.
Acked-by: Simon Ser <contact@emersion.fr>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204131455.19023-8-dmitry.baryshkov@linaro.org
|
|
This reverts commit 85863a4e16e77079ee14865905ddc3ef9483a640.
Although the Solid Fill planes patchset got all reviews and
acknowledgements, it doesn't fulfill requirements for the new uABI. It
has neither corresponding open-source userspace implementation nor the
IGT tests coverage. Reverting this patchset until userspace obligations
are fulfilled.
Acked-by: Simon Ser <contact@emersion.fr>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204131455.19023-7-dmitry.baryshkov@linaro.org
|
|
This reverts commit 4b64167042927531f4cfaf035b8f88c2f7a05f06.
Although the Solid Fill planes patchset got all reviews and
acknowledgements, it doesn't fulfill requirements for the new uABI. It
has neither corresponding open-source userspace implementation nor the
IGT tests coverage. Reverting this patchset until userspace obligations
are fulfilled.
Acked-by: Simon Ser <contact@emersion.fr>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204131455.19023-6-dmitry.baryshkov@linaro.org
|
|
This reverts commit e86413f5442ee094e66b3e75f2d3419ed0df9520.
Although the Solid Fill planes patchset got all reviews and
acknowledgements, it doesn't fulfill requirements for the new uABI. It
has neither corresponding open-source userspace implementation nor the
IGT tests coverage. Reverting this patchset until userspace obligations
are fulfilled.
Acked-by: Simon Ser <contact@emersion.fr>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204131455.19023-4-dmitry.baryshkov@linaro.org
|
|
This reverts commit f1e75da5364e780905d9cd6043f9c74cdcf84073.
Although the Solid Fill planes patchset got all reviews and
acknowledgements, it doesn't fulfill requirements for the new uABI. It
has neither corresponding open-source userspace implementation nor the
IGT tests coverage. Reverting this patchset until userspace obligations
are fulfilled.
Acked-by: Simon Ser <contact@emersion.fr>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204131455.19023-2-dmitry.baryshkov@linaro.org
|
|
Loosen the requirements for atomic and legacy commit so that, in cases
where pixel_source != FB, the commit can still go through.
This includes adding framebuffer NULL checks in other areas to account for
FB being NULL when non-FB pixel sources are enabled.
To disable a plane, the pixel_source must be NONE or the FB must be NULL
if pixel_source == FB.
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231027-solid-fill-v7-7-780188bfa7b2@quicinc.com
|
|
Add solid_fill property data to the atomic plane state dump.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Sebastian Wick <sebastian@sebastianwick.net>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231027-solid-fill-v7-5-780188bfa7b2@quicinc.com
|
|
Add "SOLID_FILL" as a valid pixel source. If the pixel_source property is
set to "SOLID_FILL", it will display data from the drm_plane "solid_fill"
blob property.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Sebastian Wick <sebastian@sebastianwick.net>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231027-solid-fill-v7-3-780188bfa7b2@quicinc.com
|
|
Document and add support for solid_fill property to drm_plane. In
addition, add support for setting and getting the values for solid_fill.
To enable solid fill planes, userspace must assign a property blob to
the "solid_fill" plane property containing the following information:
struct drm_mode_solid_fill {
u32 r, g, b, pad;
};
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Sebastian Wick <sebastian@sebastianwick.net>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231027-solid-fill-v7-2-780188bfa7b2@quicinc.com
|
|
Add support for pixel_source property to drm_plane and related
documentation. In addition, force pixel_source to
DRM_PLANE_PIXEL_SOURCE_FB in DRM_IOCTL_MODE_SETPLANE as to not break
legacy userspace.
This enum property will allow user to specify a pixel source for the
plane. Possible pixel sources will be defined in the
drm_plane_pixel_source enum.
Currently, the only pixel sources are DRM_PLANE_PIXEL_SOURCE_FB (the
default value) and DRM_PLANE_PIXEL_SOURCE_NONE.
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Sebastian Wick <sebastian@sebastianwick.net>
Acked-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231027-solid-fill-v7-1-780188bfa7b2@quicinc.com
|
|
It allows drivers to set a struct drm_plane_state .ignore_damage_clips in
their plane's .atomic_check callback, as an indication to damage helpers
such as drm_atomic_helper_damage_iter_init() that the damage clips should
be ignored.
To be used by drivers that do per-buffer (e.g: virtio-gpu) uploads (rather
than per-plane uploads), since these type of drivers need to handle buffer
damages instead of frame damages.
That way, these drivers could force a full plane update if the framebuffer
attached to a plane's state has changed since the last update (page-flip).
Fixes: 01f05940a9a7 ("drm/virtio: Enable fb damage clips property for the primary plane")
Cc: <stable@vger.kernel.org> # v6.4+
Reported-by: nerdopolis <bluescreen_avenger@verizon.net>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218115
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Acked-by: Sima Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20231123221315.3579454-2-javierm@redhat.com
|
|
Atomic modesetting code lacked support for specifying mouse cursor
hotspots. The legacy kms DRM_IOCTL_MODE_CURSOR2 had support for setting
the hotspot but the functionality was not implemented in the new atomic
paths.
Due to the lack of hotspots in the atomic paths userspace compositors
completely disable atomic modesetting for drivers that require it (i.e.
all paravirtualized drivers).
This change adds hotspot properties to the atomic codepaths throughtout
the DRM core and will allow enabling atomic modesetting for virtualized
drivers in the userspace.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231023074613.41327-3-aesteve@redhat.com
|
|
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20230409131547.494128-1-15330273260@189.cn
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
The helper drm_gem_simple_display_pipe_prepare_fb() is simple-KMS'
default implementation for prepare_fb. Remove the call from drivers
that set it explicitly. Then inline the helper into the only caller
within simple-kms helpers. No functional changes.
Simple-KMS drivers that implement the prepare_fb callback should call
drm_gem_plane_helper_prepare_fb() directly.
v2:
* fix typo in commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221202125644.7917-2-tzimmermann@suse.de
|
|
Provide drm_univeral_plane_alloc() to allocate and initialize a
plane. Code for non-atomic drivers uses this pattern. Convert them to
the new function. The modeset helpers contain a quirk for handling their
color formats differently. Set the flag outside plane allocation.
The new function is already deprecated to some extend. Drivers should
rather use drmm_univeral_plane_alloc() or drm_universal_plane_init().
v2:
* kerneldoc fixes (Javier)
* grammar fixes in commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com> # nouveau
Link: https://patchwork.freedesktop.org/patch/msgid/20220909105947.6487-3-tzimmermann@suse.de
|
|
Open-code drm_plane_init() and remove the function from DRM. The
implementation of drm_plane_init() is a simple wrapper around a call
to drm_universal_plane_init(), so drivers can just use that instead.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Lyude Paul <lyude@redhat.com> # nouveau
Acked-by: Jyri Sarha <jyri.sarha@iki.fi>
Link: https://patchwork.freedesktop.org/patch/msgid/20220909105947.6487-2-tzimmermann@suse.de
|
|
drm_gem_plane_helper_prepare_fb() was using
drm_atomic_set_fence_for_plane() which ignores all implicit fences when an
explicit fence is already set. That's rather unfortunate when the fb still
has a kernel fence we need to wait for to avoid presenting garbage on the
screen.
So instead update the fence in the plane state directly. While at it also
take care of all potential GEM objects and not just the first one.
Also remove the now unused drm_atomic_set_fence_for_plane() function, new
drivers should probably use the atomic helpers directly.
v2: improve kerneldoc, use local variable and num_planes, WARN_ON_ONCE
on missing planes.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v1)
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220429134230.24334-1-christian.koenig@amd.com
|
|
The LINEAR modifier is advertised as default if a driver doesn't specify
modifiers.
v2:
- rebase to the latest master branch (5.16.0+)
+ "drm/plane: Make format_mod_supported truly optional" patch [1]
[1] https://patchwork.freedesktop.org/patch/467940/?series=98255&rev=3
v3:
- change the order as follows:
1. add fb_modifiers_not_supported flag
2. add default modifiers
3. remove allow_fb_modifiers flag
v5:
- change default_modifiers array from non-static to static
- remove terminator in default_modifiers array
- use ARRAY_SIZE to get the format_modifier_count
- update sanity check in plane init func to use the
fb_modifiers_not_supported
- modify kernel docs
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128060836.11216-3-etom@igel.co.jp
|
|
Fix minor typo: "valdiate" -> "validate".
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20211226112503.31771-3-jose.exposito89@gmail.com
|
|
Minor typofix noticed when reading the KMS documentation.
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20210829160401.4588-1-alyssa@rosenzweig.io
|
|
We're trying to have a fairly strict split between core functionality
that defines the uapi, including the docs, and the helper functions to
implement it.
Move drm_plane_enable_fb_damage_clips and associated kerneldoc into
drm_plane from drm_damage_helper.c to fix this.
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723083457.696939-3-daniel.vetter@ffwll.ch
|
|
There's two stages of manual upload/invalidate displays:
- just handling dirtyfb and uploading the entire fb all the time
- looking at damage clips
In the latter case we support it through fbdev emulation (with
fb_defio), atomic property, and with the dirtfy clip rects.
Make sure at least the atomic property is set up as the main official
interface for this. Ideally we'd also check that
drm_atomic_helper_dirtyfb() is used and that fbdev defio is set up,
but that's quite a bit harder to do. Ideas very much welcome.
From a cursor audit drivers seem to be getting this right mostly, but
better to make sure. At least no one is bypassing the accessor
function.
v2:
- use drm_warn_once with a meaningful warning string (José)
- don't splat in the atomic check code for everyone (intel-gfx-ci)
Reviewed-by: José Roberto de Souza <jose.souza@intel.com> (v1)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723083457.696939-2-daniel.vetter@ffwll.ch
|
|
It's not used. Drivers should instead use the helpers anyway.
Currently both vbox and i915 hand-roll this and it's not the greatest.
vbox looks buggy, and i915 does a bit much that helpers would take
care of I think.
Also improve the kerneldocs while we're at it.
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723083457.696939-1-daniel.vetter@ffwll.ch
|
|
The function drm_gem_fb_prepare_fb() is a helper for atomic modesetting,
but currently located next to framebuffer helpers. Move it to GEM atomic
helpers, rename it slightly and adopt the drivers. Same for the rsp
simple-pipe helper.
Compile-tested with x86-64, aarch64 and arm. The patch is fairly large,
but there are no functional changes.
v3:
* remove out-comented line in drm_gem_framebuffer_helper.h
(Maxime)
v2:
* rename to drm_gem_plane_helper_prepare_fb() (Daniel)
* add tutorial-style documentation
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210222141756.7864-1-tzimmermann@suse.de
|
|
The docs for enum drm_plane_type mention legacy IOCTLs, however the
plane type is not tied to legacy IOCTLs, the drm_cursor.primary and
cursor fields are. Add a small paragraph to reference these.
Instead, document expectations for primary and cursor planes for
non-legacy userspace. Note that these docs are for driver developers,
not userspace developers, so internal kernel APIs are mentionned.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115110626.12233-1-contact@emersion.fr
|
|
Add an alternative to drm_universal_plane_init() that allocates
and initializes a plane and registers drm_plane_cleanup() with
drmm_add_action_or_reset().
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Introduce per-plane and per-CRTC scaling filter properties to allow
userspace to select the driver's default scaling filter or
Nearest-neighbor(NN) filter for upscaling operations on CRTC and
plane.
Drivers can set up this property for a plane by calling
drm_plane_create_scaling_filter() and for a CRTC by calling
drm_crtc_create_scaling_filter().
NN filter works by filling in the missing color values in the upscaled
image with that of the coordinate-mapped nearest source pixel value.
NN filter for integer multiple scaling can be particularly useful for
for pixel art games that rely on sharp, blocky images to deliver their
distinctive look.
changes since: v6:
* Move property doc to existing "Standard CRTC Properties" and
"Plane Composition Properties" doc comments (Simon)
changes since v3:
* Refactor code, add new function for common code (Ville)
changes since v2:
* Create per-plane and per-CRTC scaling filter property (Ville)
changes since v1:
* None
changes since RFC:
* Add separate properties for plane and CRTC (Ville)
Link: https://github.com/xbmc/xbmc/pull/18194
Link: https://github.com/xbmc/xbmc/pull/18567
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Simon Ser <contact@emersion.fr>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201020161427.6941-2-pankaj.laxminarayan.bharadiya@intel.com
|
|
The rectangles are usually clipped, but it can be useful to have
them unclipped, for example for cursor planes.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[mlankhorst: Change cursor plane to hardware performing clipping. (Ville)
Fix dst description that went missing.]
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191010112918.15724-1-maarten.lankhorst@linux.intel.com
|
|
Currently the property docs don't specify whether it's okay for two planes to
have the same zpos value and what user-space should expect in this case.
The unspoken, legacy rule used in the past was to make user-space figure
out the zpos from object IDs. However some drivers break this rule,
that's why the ordering is documented as unspecified in case the zpos
property is missing. User-space should rely on the zpos property only.
There are some cases in which user-space might read identical zpos
values for different planes.
For instance, in case the property is mutable, user-space might set two
planes' zpos to the same value. This is necessary to support user-space
using the legacy DRM API where atomic commits are not possible:
user-space needs to update the planes' zpos one by one.
Because of this, user-space should handle multiple planes with the same
zpos.
While at it, remove the assumption that zpos is only for overlay planes.
Additionally, update the drm_plane_state.zpos docs to clarify that zpos
disambiguation via plane object IDs is a recommendation for drivers, not
something user-space can rely on. In other words, when user-space sets
the same zpos on two planes, drivers should rely on the plane object ID.
v2: clarify drm_plane_state.zpos docs (Daniel)
v3: zpos is for all planes (Marius, Daniel)
v4: completely reword the drm_plane_state.zpos docs to make it clear the
recommendation to use plane IDs is for drivers in case user-space uses
duplicate zpos values (Pekka)
v5: reword commit message (Pekka, James)
v6: remove mention of Arm GPUs having planes which can't overlap,
because this isn't uAPI yet (Daniel)
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Marius Vlad <marius.vlad@collabora.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: James Qian Wang <james.qian.wang@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/T5nHrvXH0GKOp6ONaFHk-j2cwEb4_4C_sBz9rNw8mmPACuut-DQqC74HMAFKZH3_Q15E8a3YnmKCxap-djKA71VVZv_T-tFxaB0he13O7yA=@emersion.fr
|
|
drm_atomic_set_fence_for_plane() contains the main discussion from a
driver pov, link to that from more places.
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190603142848.26487-1-daniel.vetter@ffwll.ch
|
|
With fb_damage_clips blob property in drm_plane_state, this patch adds
helper iterator to traverse the damage clips that lie inside plane src.
Iterator will return full plane src as damage in case need full plane
update or damage is not specified.
v2:
- Plane src clipping correction
- Handle no plane update case in iter_next
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
|
|
FB_DAMAGE_CLIPS is an optional plane property to mark damaged regions
on the plane in framebuffer coordinates of the framebuffer attached to
the plane.
The layout of blob data is simply an array of "struct drm_mode_rect".
Unlike plane src coordinates, damage clips are not in 16.16 fixed point.
As plane src in framebuffer cannot be negative so are damage clips. In
damage clip, x1/y1 are inclusive and x2/y2 are exclusive.
This patch also exports the kernel internal drm_rect to userspace as
drm_mode_rect. This is because "struct drm_clip_rect" is not sufficient
to represent damage for current plane size.
Driver which are interested in enabling FB_DAMAGE_CLIPS property for a
plane should enable this property using drm_plane_enable_damage_clips.
v2:
- Input validation on damage clips against framebuffer size.
- Doc update, other minor changes.
Signed-off-by: Lukasz Spintzyk <lukasz.spintzyk@displaylink.com>
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
|
|
Add a function to check whether there is at least one plane that
supports a specific format and modifier combination. Drivers can
use this to reject unsupported formats/modifiers in .fb_create().
v2: Accept anyformat if the driver doesn't do planes (Eric)
s/planes_have_format/any_plane_has_format/ (Eric)
Check the modifier as well since we already have a function
that does both
v3: Don't do the check in the core since we may not know the
modifier yet, instead export the function and let drivers
call it themselves
Cc: Eric Anholt <eric@anholt.net>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181029183453.28541-1-ville.syrjala@linux.intel.com
|
|
Just a bit of missing includes and pre declarations.
v2: Compiles now, with drm/drm_util.h extracted.
v3: Rebase
v3: Fix up commit message (Sam Ravnborg)
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180905135711.28370-3-daniel.vetter@ffwll.ch
|
|
We have a bunch of neat little macros all over the place which should
move to kernel.h. But some of them died in bikesheds on lkml, and we
need a decent home for them.
Start out by moving the for_each_if macro there.
v2: Rename to drm_util.h instead (Dave&Sean)
Cc: Sean Paul <seanpaul@chromium.org>
Acked-by: Sean Paul <seanpaul@chromium.org>
Cc: Dave Airlie <airlied@gmail.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180905135711.28370-1-daniel.vetter@ffwll.ch
|
|
Adds docs for pixel_blend_mode in drm_plane_state. Fixes the warning
found by kbuild test robot:
htmldocs: include/drm/drm_plane.h:189: warning: Function parameter or member 'pixel_blend_mode' not described in 'drm_plane_state'
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Lowry Li <lowry.li@arm.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180831150934.202332-1-sean@poorly.run
|
|
Pixel blend modes represent the alpha blending equation
selection, describing how the pixels from the current
plane are composited with the background.
Adds a pixel_blend_mode to drm_plane_state and a
blend_mode_property to drm_plane, and related support
functions.
Defines three blend modes in drm_blend.h.
Changes since v1:
- Moves the blending equation into the DOC comment
- Refines the comments of drm_plane_create_blend_mode_property to not
enumerate the #defines, but instead the string values
- Uses fg.* instead of pixel.* and plane_alpha instead of plane.alpha
Changes since v2:
- Refines the comments of drm_plane_create_blend_mode_property:
1) Puts the descriptions (after the ":") on a new line
2) Adds explaining why @supported_modes need PREMUL as default
Changes since v3:
- Refines drm_plane_create_blend_mode_property(). drm_property_add_enum()
can calculate the index itself just fine, so no point in having the
caller pass it in.
- Since the current DRM assumption is that alpha is premultiplied
as default, define DRM_MODE_BLEND_PREMULTI as 0 will be better.
- Refines some comments.
Changes since v4:
- Adds comments in drm_blend.h.
- Removes setting default value in drm_plane_create_blend_mode_property()
as it is already in __drm_atomic_helper_plane_reset().
- Fixes to use state->pixel_blend_mode instead of using
plane->state->pixel_blend_mode in reset function.
- Rebases on drm-misc-next.
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Lowry Li <lowry.li@arm.com>
Signed-off-by: Ayan Kumar Halder <ayan.halder@arm.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/245734/
|
|
And use that opportunity to polish the kernel doc all around:
- Beef up some of the documentation.
- Intro text for drm_plane and better links
- Fix all the hyperlinks!
v2: Fix linebreaks.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-10-daniel.vetter@ffwll.ch
|
|
For consistency and to encourage more detailed documentation. While
doing this also beefed up a few of the comments, linking at least to
the setup function. Plus fixed all the hyperlinks.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-9-daniel.vetter@ffwll.ch
|
|
Add drm_plane_mask() which returns the 1<<index for the plane.
We already have an identical drm_crtc_mask() for crtcs.
Mostly performed with coccinelle:
@@
@@
- (1<<drm_plane_index(
+ drm_plane_mask(
...)
- )
@@
@@
- 1<<drm_plane_index(
+ drm_plane_mask(
...)
@@
@@
- BIT(drm_plane_index(
+ drm_plane_mask(
...)
- )
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180626194716.12522-1-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
This patch add checks for atomic_[duplicate/destroy]_state of
drm_[connector/crtc/plane]_funcs for atomic drivers in the relevant
drm_*_init functions since these callback are mandatory for atomic drivers.
Update the kerneldoc comments for those callbacks.
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180525012555.GA8448@haneen-vb
|
|
For parameterized modifiers (Broadcom's SAND and UIF), we need to
allow the parameter fields to be filled in, while exposing only the
variant of the modifier with the parameter unfilled in the internal
arrays and the format blob.
Signed-off-by: Eric Anholt <eric@anholt.net>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180316220435.31416-1-eric@anholt.net
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
|
|
Note that a pile of drivers don't seem to take implicit fencing into
account, or at least don't call drm_atoimc_set_fence_for_plane().
Cc'ing relevant people, or at least some. Some drivers also look like
they don't disable implicit fencing (e.g. amdgpu) because the explicit
fences and implicit fences are handled by entirely independent code
paths.
I also wonder whether we shouldn't just make the recommended helpers
the default ones, since a lot of drivers don't bother to handle the
implicit fences at all it seems. The helpers won't blow up even for
non-GEM drivers or GEM drivers which don't fill out the gem bo
pointers in struct drm_framebuffer.
v2: Comments from Eric.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-7-daniel.vetter@ffwll.ch
|
|
Some drivers duplicate the logic to create a property to store a per-plane
alpha.
This is especially useful if we ever want to support extra protocols for
Wayland like:
https://lists.freedesktop.org/archives/wayland-devel/2017-August/034741.html
Let's create a helper in order to move that to the core.
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6e1ce0db78fcfc407e94913c64819e65109d034d.1523432341.git-series.maxime.ripard@bootlin.com
|
|
Instead of drivers duplicating the drm_atomic_helper_check() code to be
able to normalize the zpos they can use the normalize_zpos flag to let the
drm core to do it.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180321102029.15248-2-peter.ujfalusi@ti.com
|
|
Add a standard optional properties to support different non RGB color
encodings in DRM planes. COLOR_ENCODING select the supported non RGB
color encoding, for instance ITU-R BT.709 YCbCr. COLOR_RANGE selects
the value ranges within the selected color encoding. The properties
are stored to drm_plane object to allow different set of supported
encoding for different planes on the device.
v2: Add/fix kerneldocs, verify bitmasks (danvet)
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Russell King - ARM Linux <linux@armlinux.org.uk>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
[vsyrjala v2: Add/fix kerneldocs, verify bitmasks]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180219202823.10508-1-ville.syrjala@linux.intel.com
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
