diff options
Diffstat (limited to 'drivers/pci/pci.c')
| -rw-r--r-- | drivers/pci/pci.c | 58 |
1 files changed, 42 insertions, 16 deletions
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 7d85c04fbba2..3d67e8b50ba2 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -6189,38 +6189,64 @@ u32 pcie_bandwidth_available(struct pci_dev *dev, struct pci_dev **limiting_dev, EXPORT_SYMBOL(pcie_bandwidth_available); /** - * pcie_get_speed_cap - query for the PCI device's link speed capability + * pcie_get_supported_speeds - query Supported Link Speed Vector * @dev: PCI device to query * - * Query the PCI device speed capability. Return the maximum link speed - * supported by the device. + * Query @dev supported link speeds. + * + * Implementation Note in PCIe r6.0 sec 7.5.3.18 recommends determining + * supported link speeds using the Supported Link Speeds Vector in the Link + * Capabilities 2 Register (when available). + * + * Link Capabilities 2 was added in PCIe r3.0, sec 7.8.18. + * + * Without Link Capabilities 2, i.e., prior to PCIe r3.0, Supported Link + * Speeds field in Link Capabilities is used and only 2.5 GT/s and 5.0 GT/s + * speeds were defined. + * + * For @dev without Supported Link Speed Vector, the field is synthesized + * from the Max Link Speed field in the Link Capabilities Register. + * + * Return: Supported Link Speeds Vector (+ reserved 0 at LSB). */ -enum pci_bus_speed pcie_get_speed_cap(struct pci_dev *dev) +u8 pcie_get_supported_speeds(struct pci_dev *dev) { u32 lnkcap2, lnkcap; + u8 speeds; /* - * Link Capabilities 2 was added in PCIe r3.0, sec 7.8.18. The - * implementation note there recommends using the Supported Link - * Speeds Vector in Link Capabilities 2 when supported. - * - * Without Link Capabilities 2, i.e., prior to PCIe r3.0, software - * should use the Supported Link Speeds field in Link Capabilities, - * where only 2.5 GT/s and 5.0 GT/s speeds were defined. + * Speeds retain the reserved 0 at LSB before PCIe Supported Link + * Speeds Vector to allow using SLS Vector bit defines directly. */ pcie_capability_read_dword(dev, PCI_EXP_LNKCAP2, &lnkcap2); + speeds = lnkcap2 & PCI_EXP_LNKCAP2_SLS; /* PCIe r3.0-compliant */ - if (lnkcap2) - return PCIE_LNKCAP2_SLS2SPEED(lnkcap2); + if (speeds) + return speeds; pcie_capability_read_dword(dev, PCI_EXP_LNKCAP, &lnkcap); + + /* Synthesize from the Max Link Speed field */ if ((lnkcap & PCI_EXP_LNKCAP_SLS) == PCI_EXP_LNKCAP_SLS_5_0GB) - return PCIE_SPEED_5_0GT; + speeds = PCI_EXP_LNKCAP2_SLS_5_0GB | PCI_EXP_LNKCAP2_SLS_2_5GB; else if ((lnkcap & PCI_EXP_LNKCAP_SLS) == PCI_EXP_LNKCAP_SLS_2_5GB) - return PCIE_SPEED_2_5GT; + speeds = PCI_EXP_LNKCAP2_SLS_2_5GB; - return PCI_SPEED_UNKNOWN; + return speeds; +} + +/** + * pcie_get_speed_cap - query for the PCI device's link speed capability + * @dev: PCI device to query + * + * Query the PCI device speed capability. + * + * Return: the maximum link speed supported by the device. + */ +enum pci_bus_speed pcie_get_speed_cap(struct pci_dev *dev) +{ + return PCIE_LNKCAP2_SLS2SPEED(dev->supported_speeds); } EXPORT_SYMBOL(pcie_get_speed_cap); |