summaryrefslogtreecommitdiff
path: root/drivers/ata
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata')
-rw-r--r--drivers/ata/libata-core.c149
-rw-r--r--drivers/ata/libata-eh.c48
-rw-r--r--drivers/ata/libata-scsi.c100
-rw-r--r--drivers/ata/libata-transport.c9
-rw-r--r--drivers/ata/libata.h4
5 files changed, 262 insertions, 48 deletions
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 0072e0f9ad39..d8cc1e27a125 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1973,6 +1973,96 @@ retry:
}
/**
+ * ata_dev_power_set_standby - Set a device power mode to standby
+ * @dev: target device
+ *
+ * Issue a STANDBY IMMEDIATE command to set a device power mode to standby.
+ * For an HDD device, this spins down the disks.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep).
+ */
+void ata_dev_power_set_standby(struct ata_device *dev)
+{
+ unsigned long ap_flags = dev->link->ap->flags;
+ struct ata_taskfile tf;
+ unsigned int err_mask;
+
+ /* Issue STANDBY IMMEDIATE command only if supported by the device */
+ if (dev->class != ATA_DEV_ATA && dev->class != ATA_DEV_ZAC)
+ return;
+
+ /*
+ * Some odd clown BIOSes issue spindown on power off (ACPI S4 or S5)
+ * causing some drives to spin up and down again. For these, do nothing
+ * if we are being called on shutdown.
+ */
+ if ((ap_flags & ATA_FLAG_NO_POWEROFF_SPINDOWN) &&
+ system_state == SYSTEM_POWER_OFF)
+ return;
+
+ if ((ap_flags & ATA_FLAG_NO_HIBERNATE_SPINDOWN) &&
+ system_entering_hibernation())
+ return;
+
+ ata_tf_init(dev, &tf);
+ tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR;
+ tf.protocol = ATA_PROT_NODATA;
+ tf.command = ATA_CMD_STANDBYNOW1;
+
+ ata_dev_notice(dev, "Entering standby power mode\n");
+
+ err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
+ if (err_mask)
+ ata_dev_err(dev, "STANDBY IMMEDIATE failed (err_mask=0x%x)\n",
+ err_mask);
+}
+
+/**
+ * ata_dev_power_set_active - Set a device power mode to active
+ * @dev: target device
+ *
+ * Issue a VERIFY command to enter to ensure that the device is in the
+ * active power mode. For a spun-down HDD (standby or idle power mode),
+ * the VERIFY command will complete after the disk spins up.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep).
+ */
+void ata_dev_power_set_active(struct ata_device *dev)
+{
+ struct ata_taskfile tf;
+ unsigned int err_mask;
+
+ /*
+ * Issue READ VERIFY SECTORS command for 1 sector at lba=0 only
+ * if supported by the device.
+ */
+ if (dev->class != ATA_DEV_ATA && dev->class != ATA_DEV_ZAC)
+ return;
+
+ ata_tf_init(dev, &tf);
+ tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR;
+ tf.protocol = ATA_PROT_NODATA;
+ tf.command = ATA_CMD_VERIFY;
+ tf.nsect = 1;
+ if (dev->flags & ATA_DFLAG_LBA) {
+ tf.flags |= ATA_TFLAG_LBA;
+ tf.device |= ATA_LBA;
+ } else {
+ /* CHS */
+ tf.lbal = 0x1; /* sect */
+ }
+
+ ata_dev_notice(dev, "Entering active power mode\n");
+
+ err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
+ if (err_mask)
+ ata_dev_err(dev, "VERIFY failed (err_mask=0x%x)\n",
+ err_mask);
+}
+
+/**
* ata_read_log_page - read a specific log page
* @dev: target device
* @log: log to read
@@ -2529,7 +2619,7 @@ static int ata_dev_config_lba(struct ata_device *dev)
{
const u16 *id = dev->id;
const char *lba_desc;
- char ncq_desc[24];
+ char ncq_desc[32];
int ret;
dev->flags |= ATA_DFLAG_LBA;
@@ -5037,17 +5127,19 @@ static void ata_port_request_pm(struct ata_port *ap, pm_message_t mesg,
struct ata_link *link;
unsigned long flags;
- /* Previous resume operation might still be in
- * progress. Wait for PM_PENDING to clear.
+ spin_lock_irqsave(ap->lock, flags);
+
+ /*
+ * A previous PM operation might still be in progress. Wait for
+ * ATA_PFLAG_PM_PENDING to clear.
*/
if (ap->pflags & ATA_PFLAG_PM_PENDING) {
+ spin_unlock_irqrestore(ap->lock, flags);
ata_port_wait_eh(ap);
- WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING);
+ spin_lock_irqsave(ap->lock, flags);
}
- /* request PM ops to EH */
- spin_lock_irqsave(ap->lock, flags);
-
+ /* Request PM operation to EH */
ap->pm_mesg = mesg;
ap->pflags |= ATA_PFLAG_PM_PENDING;
ata_for_each_link(link, ap, HOST_FIRST) {
@@ -5059,10 +5151,8 @@ static void ata_port_request_pm(struct ata_port *ap, pm_message_t mesg,
spin_unlock_irqrestore(ap->lock, flags);
- if (!async) {
+ if (!async)
ata_port_wait_eh(ap);
- WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING);
- }
}
/*
@@ -5078,11 +5168,27 @@ static const unsigned int ata_port_suspend_ehi = ATA_EHI_QUIET
static void ata_port_suspend(struct ata_port *ap, pm_message_t mesg)
{
+ /*
+ * We are about to suspend the port, so we do not care about
+ * scsi_rescan_device() calls scheduled by previous resume operations.
+ * The next resume will schedule the rescan again. So cancel any rescan
+ * that is not done yet.
+ */
+ cancel_delayed_work_sync(&ap->scsi_rescan_task);
+
ata_port_request_pm(ap, mesg, 0, ata_port_suspend_ehi, false);
}
static void ata_port_suspend_async(struct ata_port *ap, pm_message_t mesg)
{
+ /*
+ * We are about to suspend the port, so we do not care about
+ * scsi_rescan_device() calls scheduled by previous resume operations.
+ * The next resume will schedule the rescan again. So cancel any rescan
+ * that is not done yet.
+ */
+ cancel_delayed_work_sync(&ap->scsi_rescan_task);
+
ata_port_request_pm(ap, mesg, 0, ata_port_suspend_ehi, true);
}
@@ -5229,7 +5335,7 @@ EXPORT_SYMBOL_GPL(ata_host_resume);
#endif
const struct device_type ata_port_type = {
- .name = "ata_port",
+ .name = ATA_PORT_TYPE_NAME,
#ifdef CONFIG_PM
.pm = &ata_port_pm_ops,
#endif
@@ -5948,11 +6054,30 @@ static void ata_port_detach(struct ata_port *ap)
struct ata_link *link;
struct ata_device *dev;
- /* tell EH we're leaving & flush EH */
+ /* Wait for any ongoing EH */
+ ata_port_wait_eh(ap);
+
+ mutex_lock(&ap->scsi_scan_mutex);
spin_lock_irqsave(ap->lock, flags);
+
+ /* Remove scsi devices */
+ ata_for_each_link(link, ap, HOST_FIRST) {
+ ata_for_each_dev(dev, link, ALL) {
+ if (dev->sdev) {
+ spin_unlock_irqrestore(ap->lock, flags);
+ scsi_remove_device(dev->sdev);
+ spin_lock_irqsave(ap->lock, flags);
+ dev->sdev = NULL;
+ }
+ }
+ }
+
+ /* Tell EH to disable all devices */
ap->pflags |= ATA_PFLAG_UNLOADING;
ata_port_schedule_eh(ap);
+
spin_unlock_irqrestore(ap->lock, flags);
+ mutex_unlock(&ap->scsi_scan_mutex);
/* wait till EH commits suicide */
ata_port_wait_eh(ap);
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 4cf4f57e57b8..5686353e442c 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -147,6 +147,8 @@ ata_eh_cmd_timeout_table[ATA_EH_CMD_TIMEOUT_TABLE_SIZE] = {
.timeouts = ata_eh_other_timeouts, },
{ .commands = CMDS(ATA_CMD_FLUSH, ATA_CMD_FLUSH_EXT),
.timeouts = ata_eh_flush_timeouts },
+ { .commands = CMDS(ATA_CMD_VERIFY),
+ .timeouts = ata_eh_reset_timeouts },
};
#undef CMDS
@@ -498,7 +500,19 @@ static void ata_eh_unload(struct ata_port *ap)
struct ata_device *dev;
unsigned long flags;
- /* Restore SControl IPM and SPD for the next driver and
+ /*
+ * Unless we are restarting, transition all enabled devices to
+ * standby power mode.
+ */
+ if (system_state != SYSTEM_RESTART) {
+ ata_for_each_link(link, ap, PMP_FIRST) {
+ ata_for_each_dev(dev, link, ENABLED)
+ ata_dev_power_set_standby(dev);
+ }
+ }
+
+ /*
+ * Restore SControl IPM and SPD for the next driver and
* disable attached devices.
*/
ata_for_each_link(link, ap, PMP_FIRST) {
@@ -684,6 +698,10 @@ void ata_scsi_port_error_handler(struct Scsi_Host *host, struct ata_port *ap)
ehc->saved_xfer_mode[devno] = dev->xfer_mode;
if (ata_ncq_enabled(dev))
ehc->saved_ncq_enabled |= 1 << devno;
+
+ /* If we are resuming, wake up the device */
+ if (ap->pflags & ATA_PFLAG_RESUMING)
+ ehc->i.dev_action[devno] |= ATA_EH_SET_ACTIVE;
}
}
@@ -743,6 +761,8 @@ void ata_scsi_port_error_handler(struct Scsi_Host *host, struct ata_port *ap)
/* clean up */
spin_lock_irqsave(ap->lock, flags);
+ ap->pflags &= ~ATA_PFLAG_RESUMING;
+
if (ap->pflags & ATA_PFLAG_LOADING)
ap->pflags &= ~ATA_PFLAG_LOADING;
else if ((ap->pflags & ATA_PFLAG_SCSI_HOTPLUG) &&
@@ -1218,6 +1238,13 @@ void ata_eh_detach_dev(struct ata_device *dev)
struct ata_eh_context *ehc = &link->eh_context;
unsigned long flags;
+ /*
+ * If the device is still enabled, transition it to standby power mode
+ * (i.e. spin down HDDs).
+ */
+ if (ata_dev_enabled(dev))
+ ata_dev_power_set_standby(dev);
+
ata_dev_disable(dev);
spin_lock_irqsave(ap->lock, flags);
@@ -2305,7 +2332,7 @@ static void ata_eh_link_report(struct ata_link *link)
struct ata_eh_context *ehc = &link->eh_context;
struct ata_queued_cmd *qc;
const char *frozen, *desc;
- char tries_buf[6] = "";
+ char tries_buf[16] = "";
int tag, nr_failed = 0;
if (ehc->i.flags & ATA_EHI_QUIET)
@@ -3016,6 +3043,15 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link,
if (ehc->i.flags & ATA_EHI_DID_RESET)
readid_flags |= ATA_READID_POSTRESET;
+ /*
+ * When resuming, before executing any command, make sure to
+ * transition the device to the active power mode.
+ */
+ if ((action & ATA_EH_SET_ACTIVE) && ata_dev_enabled(dev)) {
+ ata_dev_power_set_active(dev);
+ ata_eh_done(link, dev, ATA_EH_SET_ACTIVE);
+ }
+
if ((action & ATA_EH_REVALIDATE) && ata_dev_enabled(dev)) {
WARN_ON(dev->class == ATA_DEV_PMP);
@@ -3989,6 +4025,7 @@ static void ata_eh_handle_port_suspend(struct ata_port *ap)
unsigned long flags;
int rc = 0;
struct ata_device *dev;
+ struct ata_link *link;
/* are we suspending? */
spin_lock_irqsave(ap->lock, flags);
@@ -4001,6 +4038,12 @@ static void ata_eh_handle_port_suspend(struct ata_port *ap)
WARN_ON(ap->pflags & ATA_PFLAG_SUSPENDED);
+ /* Set all devices attached to the port in standby mode */
+ ata_for_each_link(link, ap, HOST_FIRST) {
+ ata_for_each_dev(dev, link, ENABLED)
+ ata_dev_power_set_standby(dev);
+ }
+
/*
* If we have a ZPODD attached, check its zero
* power ready status before the port is frozen.
@@ -4083,6 +4126,7 @@ static void ata_eh_handle_port_resume(struct ata_port *ap)
/* update the flags */
spin_lock_irqsave(ap->lock, flags);
ap->pflags &= ~(ATA_PFLAG_PM_PENDING | ATA_PFLAG_SUSPENDED);
+ ap->pflags |= ATA_PFLAG_RESUMING;
spin_unlock_irqrestore(ap->lock, flags);
}
#endif /* CONFIG_PM */
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index d3f28b82c97b..a371b497035e 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1050,14 +1050,13 @@ int ata_scsi_dev_config(struct scsi_device *sdev, struct ata_device *dev)
}
} else {
sdev->sector_size = ata_id_logical_sector_size(dev->id);
+
/*
- * Stop the drive on suspend but do not issue START STOP UNIT
- * on resume as this is not necessary and may fail: the device
- * will be woken up by ata_port_pm_resume() with a port reset
- * and device revalidation.
+ * Ask the sd driver to issue START STOP UNIT on runtime suspend
+ * and resume only. For system level suspend/resume, devices
+ * power state is handled directly by libata EH.
*/
- sdev->manage_start_stop = 1;
- sdev->no_start_on_resume = 1;
+ sdev->manage_runtime_start_stop = true;
}
/*
@@ -1090,6 +1089,42 @@ int ata_scsi_dev_config(struct scsi_device *sdev, struct ata_device *dev)
}
/**
+ * ata_scsi_slave_alloc - Early setup of SCSI device
+ * @sdev: SCSI device to examine
+ *
+ * This is called from scsi_alloc_sdev() when the scsi device
+ * associated with an ATA device is scanned on a port.
+ *
+ * LOCKING:
+ * Defined by SCSI layer. We don't really care.
+ */
+
+int ata_scsi_slave_alloc(struct scsi_device *sdev)
+{
+ struct ata_port *ap = ata_shost_to_port(sdev->host);
+ struct device_link *link;
+
+ ata_scsi_sdev_config(sdev);
+
+ /*
+ * Create a link from the ata_port device to the scsi device to ensure
+ * that PM does suspend/resume in the correct order: the scsi device is
+ * consumer (child) and the ata port the supplier (parent).
+ */
+ link = device_link_add(&sdev->sdev_gendev, &ap->tdev,
+ DL_FLAG_STATELESS |
+ DL_FLAG_PM_RUNTIME | DL_FLAG_RPM_ACTIVE);
+ if (!link) {
+ ata_port_err(ap, "Failed to create link to scsi device %s\n",
+ dev_name(&sdev->sdev_gendev));
+ return -ENODEV;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ata_scsi_slave_alloc);
+
+/**
* ata_scsi_slave_config - Set SCSI device attributes
* @sdev: SCSI device to examine
*
@@ -1105,14 +1140,11 @@ int ata_scsi_slave_config(struct scsi_device *sdev)
{
struct ata_port *ap = ata_shost_to_port(sdev->host);
struct ata_device *dev = __ata_scsi_find_dev(ap, sdev);
- int rc = 0;
-
- ata_scsi_sdev_config(sdev);
if (dev)
- rc = ata_scsi_dev_config(sdev, dev);
+ return ata_scsi_dev_config(sdev, dev);
- return rc;
+ return 0;
}
EXPORT_SYMBOL_GPL(ata_scsi_slave_config);
@@ -1136,6 +1168,8 @@ void ata_scsi_slave_destroy(struct scsi_device *sdev)
unsigned long flags;
struct ata_device *dev;
+ device_link_remove(&sdev->sdev_gendev, &ap->tdev);
+
spin_lock_irqsave(ap->lock, flags);
dev = __ata_scsi_find_dev(ap, sdev);
if (dev && dev->sdev) {
@@ -1195,7 +1229,7 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc)
}
if (cdb[4] & 0x1) {
- tf->nsect = 1; /* 1 sector, lba=0 */
+ tf->nsect = 1; /* 1 sector, lba=0 */
if (qc->dev->flags & ATA_DFLAG_LBA) {
tf->flags |= ATA_TFLAG_LBA;
@@ -1211,7 +1245,7 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc)
tf->lbah = 0x0; /* cyl high */
}
- tf->command = ATA_CMD_VERIFY; /* READ VERIFY */
+ tf->command = ATA_CMD_VERIFY; /* READ VERIFY */
} else {
/* Some odd clown BIOSen issue spindown on power off (ACPI S4
* or S5) causing some drives to spin up and down again.
@@ -1221,7 +1255,7 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc)
goto skip;
if ((qc->ap->flags & ATA_FLAG_NO_HIBERNATE_SPINDOWN) &&
- system_entering_hibernation())
+ system_entering_hibernation())
goto skip;
/* Issue ATA STANDBY IMMEDIATE command */
@@ -1835,6 +1869,9 @@ static unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf)
hdr[2] = 0x7; /* claim SPC-5 version compatibility */
}
+ if (args->dev->flags & ATA_DFLAG_CDL)
+ hdr[2] = 0xd; /* claim SPC-6 version compatibility */
+
memcpy(rbuf, hdr, sizeof(hdr));
memcpy(&rbuf[8], "ATA ", 8);
ata_id_string(args->id, &rbuf[16], ATA_ID_PROD, 16);
@@ -4312,7 +4349,7 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd)
break;
case MAINTENANCE_IN:
- if (scsicmd[1] == MI_REPORT_SUPPORTED_OPERATION_CODES)
+ if ((scsicmd[1] & 0x1f) == MI_REPORT_SUPPORTED_OPERATION_CODES)
ata_scsi_rbuf_fill(&args, ata_scsiop_maint_in);
else
ata_scsi_set_invalid_field(dev, cmd, 1, 0xff);
@@ -4722,7 +4759,7 @@ void ata_scsi_dev_rescan(struct work_struct *work)
struct ata_link *link;
struct ata_device *dev;
unsigned long flags;
- bool delay_rescan = false;
+ int ret = 0;
mutex_lock(&ap->scsi_scan_mutex);
spin_lock_irqsave(ap->lock, flags);
@@ -4731,37 +4768,34 @@ void ata_scsi_dev_rescan(struct work_struct *work)
ata_for_each_dev(dev, link, ENABLED) {
struct scsi_device *sdev = dev->sdev;
+ /*
+ * If the port was suspended before this was scheduled,
+ * bail out.
+ */
+ if (ap->pflags & ATA_PFLAG_SUSPENDED)
+ goto unlock;
+
if (!sdev)
continue;
if (scsi_device_get(sdev))
continue;
- /*
- * If the rescan work was scheduled because of a resume
- * event, the port is already fully resumed, but the
- * SCSI device may not yet be fully resumed. In such
- * case, executing scsi_rescan_device() may cause a
- * deadlock with the PM code on device_lock(). Prevent
- * this by giving up and retrying rescan after a short
- * delay.
- */
- delay_rescan = sdev->sdev_gendev.power.is_suspended;
- if (delay_rescan) {
- scsi_device_put(sdev);
- break;
- }
-
spin_unlock_irqrestore(ap->lock, flags);
- scsi_rescan_device(sdev);
+ ret = scsi_rescan_device(sdev);
scsi_device_put(sdev);
spin_lock_irqsave(ap->lock, flags);
+
+ if (ret)
+ goto unlock;
}
}
+unlock:
spin_unlock_irqrestore(ap->lock, flags);
mutex_unlock(&ap->scsi_scan_mutex);
- if (delay_rescan)
+ /* Reschedule with a delay if scsi_rescan_device() returned an error */
+ if (ret)
schedule_delayed_work(&ap->scsi_rescan_task,
msecs_to_jiffies(5));
}
diff --git a/drivers/ata/libata-transport.c b/drivers/ata/libata-transport.c
index e4fb9d1b9b39..3e49a877500e 100644
--- a/drivers/ata/libata-transport.c
+++ b/drivers/ata/libata-transport.c
@@ -266,6 +266,10 @@ void ata_tport_delete(struct ata_port *ap)
put_device(dev);
}
+static const struct device_type ata_port_sas_type = {
+ .name = ATA_PORT_TYPE_NAME,
+};
+
/** ata_tport_add - initialize a transport ATA port structure
*
* @parent: parent device
@@ -283,7 +287,10 @@ int ata_tport_add(struct device *parent,
struct device *dev = &ap->tdev;
device_initialize(dev);
- dev->type = &ata_port_type;
+ if (ap->flags & ATA_FLAG_SAS_HOST)
+ dev->type = &ata_port_sas_type;
+ else
+ dev->type = &ata_port_type;
dev->parent = parent;
ata_host_get(ap->host);
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 6e7d352803bd..05ac80da8ebc 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -30,6 +30,8 @@ enum {
ATA_DNXFER_QUIET = (1 << 31),
};
+#define ATA_PORT_TYPE_NAME "ata_port"
+
extern atomic_t ata_print_id;
extern int atapi_passthru16;
extern int libata_fua;
@@ -60,6 +62,8 @@ extern int ata_dev_reread_id(struct ata_device *dev, unsigned int readid_flags);
extern int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class,
unsigned int readid_flags);
extern int ata_dev_configure(struct ata_device *dev);
+extern void ata_dev_power_set_standby(struct ata_device *dev);
+extern void ata_dev_power_set_active(struct ata_device *dev);
extern int sata_down_spd_limit(struct ata_link *link, u32 spd_limit);
extern int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel);
extern unsigned int ata_dev_set_feature(struct ata_device *dev,
generated by cgit v1.2.3 (git 2.25.1) at 2025-03-10 21:56:33 +0000