diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml | 188 |
1 files changed, 188 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml new file mode 100644 index 000000000000..bd4fd8404aa4 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml @@ -0,0 +1,188 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sdm630-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SDM630 and SDM660 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm SDM630 and SDM660 SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + enum: + - qcom,sdm630-pinctrl + - qcom,sdm660-pinctrl + + reg: + maxItems: 3 + + reg-names: + items: + - const: south + - const: center + - const: north + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 57 + + gpio-line-names: + maxItems: 114 + + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sdm630-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sdm630-tlmm-state" + additionalProperties: false + +$defs: + qcom-sdm630-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-3])$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk, + sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + enum: [ adsp_ext, agera_pll, atest_char, atest_char0, atest_char1, + atest_char2, atest_char3, atest_gpsadc0, atest_gpsadc1, + atest_tsens, atest_tsens2, atest_usb1, atest_usb10, + atest_usb11, atest_usb12, atest_usb13, atest_usb2, atest_usb20, + atest_usb21, atest_usb22, atest_usb23, audio_ref, bimc_dte0, + bimc_dte1, blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, + blsp_i2c5, blsp_i2c6, blsp_i2c7, blsp_i2c8_a, blsp_i2c8_b, + blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi3_cs1, blsp_spi3_cs2, + blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7, blsp_spi8_a, + blsp_spi8_b, blsp_spi8_cs1, blsp_spi8_cs2, blsp_uart1, + blsp_uart2, blsp_uart5, blsp_uart6_a, blsp_uart6_b, blsp_uim1, + blsp_uim2, blsp_uim5, blsp_uim6, cam_mclk, cci_async, cci_i2c, + cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, gcc_gp1, + gcc_gp2, gcc_gp3, gpio, gps_tx_a, gps_tx_b, gps_tx_c, + isense_dbg, jitter_bist, ldo_en, ldo_update, m_voc, mdp_vsync, + mdss_vsync0, mdss_vsync1, mdss_vsync2, mdss_vsync3, mss_lte, + nav_pps_a, nav_pps_b, nav_pps_c, pa_indicator, phase_flag0, + phase_flag1, phase_flag10, phase_flag11, phase_flag12, + phase_flag13, phase_flag14, phase_flag15, phase_flag16, + phase_flag17, phase_flag18, phase_flag19, phase_flag2, + phase_flag20, phase_flag21, phase_flag22, phase_flag23, + phase_flag24, phase_flag25, phase_flag26, phase_flag27, + phase_flag28, phase_flag29, phase_flag3, phase_flag30, + phase_flag31, phase_flag4, phase_flag5, phase_flag6, + phase_flag7, phase_flag8, phase_flag9, pll_bypassnl, pll_reset, + pri_mi2s, pri_mi2s_ws, prng_rosc, pwr_crypto, pwr_modem, + pwr_nav, qdss_cti0_a, qdss_cti0_b, qdss_cti1_a, qdss_cti1_b, + qdss_gpio, qdss_gpio0, qdss_gpio1, qdss_gpio10, qdss_gpio11, + qdss_gpio12, qdss_gpio13, qdss_gpio14, qdss_gpio15, qdss_gpio2, + qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6, qdss_gpio7, + qdss_gpio8, qdss_gpio9, qlink_enable, qlink_request, qspi_clk, + qspi_cs, qspi_data0, qspi_data1, qspi_data2, qspi_data3, + qspi_resetn, sec_mi2s, sndwire_clk, sndwire_data, sp_cmu, + ssc_irq, tgu_ch0, tgu_ch1, tsense_pwm1, tsense_pwm2, uim1_clk, + uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data, + uim2_present, uim2_reset, uim_batt, vfr_1, vsense_clkout, + vsense_data0, vsense_data1, vsense_mode, wlan1_adc0, + wlan1_adc1, wlan2_adc0, wlan2_adc1 ] + + bias-disable: true + bias-pull-down: true + bias-pull-up: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@3100000 { + compatible = "qcom,sdm630-pinctrl"; + reg = <0x03100000 0x400000>, + <0x03500000 0x400000>, + <0x03900000 0x400000>; + reg-names = "south", "center", "north"; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 114>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + blsp1-uart1-default-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_uart1_default: blsp2-uart1-active-state { + tx-rts-pins { + pins = "gpio16", "gpio19"; + function = "blsp_uart5"; + drive-strength = <2>; + bias-disable; + }; + + rx-pins { + pins = "gpio17"; + function = "blsp_uart5"; + drive-strength = <2>; + bias-pull-up; + }; + + cts-pins { + pins = "gpio18"; + function = "blsp_uart5"; + drive-strength = <2>; + bias-pull-down; + }; + }; + }; |