1 files changed, 0 insertions, 43 deletions
diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-hdmi.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-hdmi.txt
deleted file mode 100644
index 710cccd5ee56..000000000000
--- a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-hdmi.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-ROCKCHIP HDMI PHY WITH INNO IP BLOCK
-
-Required properties:
- - compatible : should be one of the listed compatibles:
-	* "rockchip,rk3228-hdmi-phy",
-	* "rockchip,rk3328-hdmi-phy";
- - reg : Address and length of the hdmi phy control register set
- - clocks : phandle + clock specifier for the phy clocks
- - clock-names : string, clock name, must contain "sysclk" for system
-	  control and register configuration, "refoclk" for crystal-
-	  oscillator reference PLL clock input and "refpclk" for pclk-
-	  based refeference PLL clock input.
- - #clock-cells: should be 0.
- - clock-output-names : shall be the name for the output clock.
- - interrupts : phandle + interrupt specified for the hdmiphy interrupt
- - #phy-cells : must be 0. See ./phy-bindings.txt for details.
-
-Optional properties for rk3328-hdmi-phy:
- - nvmem-cells = phandle + nvmem specifier for the cpu-version efuse
- - nvmem-cell-names : "cpu-version" to read the chip version, required
-	  for adjustment to some frequency settings
-
-Example:
-	hdmi_phy: hdmi-phy@12030000 {
-		compatible = "rockchip,rk3228-hdmi-phy";
-		reg = <0x12030000 0x10000>;
-		#phy-cells = <0>;
-		clocks = <&cru PCLK_HDMI_PHY>, <&xin24m>, <&cru DCLK_HDMIPHY>;
-		clock-names = "sysclk", "refoclk", "refpclk";
-		#clock-cells = <0>;
-		clock-output-names = "hdmi_phy";
-		status = "disabled";
-	};
-
-Then the PHY can be used in other nodes such as:
-
-	hdmi: hdmi@200a0000 {
-		compatible = "rockchip,rk3228-dw-hdmi";
-		...
-		phys = <&hdmi_phy>;
-		phy-names = "hdmi";
-		...
-	};