Merge tag 'wireless-next-2024-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Kalle Valo says:

====================
wireless-next patches for v6.11

The first "new features" pull request for v6.11 with changes both in
stack and in drivers. Nothing out of ordinary, except that we have
two conflicts this time:

net/mac80211/cfg.c
  https://lore.kernel.org/all/20240531124415.05b25e7a@canb.auug.org.au

drivers/net/wireless/microchip/wilc1000/netdev.c
  https://lore.kernel.org/all/20240603110023.23572803@canb.auug.org.au

Major changes:

cfg80211/mac80211
 * parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers

wilc1000
 * read MAC address during probe to make it visible to user space

iwlwifi
 * bump FW API to 91 for BZ/SC devices
 * report 64-bit radiotap timestamp
 * enable P2P low latency by default
 * handle Transmit Power Envelope (TPE) advertised by AP
 * start using guard()

rtlwifi
 * RTL8192DU support

ath12k
 * remove unsupported tx monitor handling
 * channel 2 in 6 GHz band support
 * Spatial Multiplexing Power Save (SMPS) in 6 GHz band support
 * multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA)
   support
 * dynamic VLAN support
 * add panic handler for resetting the firmware state

ath10k
 * add qcom,no-msa-ready-indicator Device Tree property
 * LED support for various chipsets

* tag 'wireless-next-2024-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (194 commits)
  wifi: ath12k: add hw_link_id in ath12k_pdev
  wifi: ath12k: add panic handler
  wifi: rtw89: chan: Use swap() in rtw89_swap_sub_entity()
  wifi: brcm80211: remove unused structs
  wifi: brcm80211: use sizeof(*pointer) instead of sizeof(type)
  wifi: ath12k: do not process consecutive RDDM event
  dt-bindings: net: wireless: ath11k: Drop "qcom,ipq8074-wcss-pil" from example
  wifi: ath12k: fix memory leak in ath12k_dp_rx_peer_frag_setup()
  wifi: rtlwifi: handle return value of usb init TX/RX
  wifi: rtlwifi: Enable the new rtl8192du driver
  wifi: rtlwifi: Add rtl8192du/sw.c
  wifi: rtlwifi: Constify rtl_hal_cfg.{ops,usb_interface_cfg} and rtl_priv.cfg
  wifi: rtlwifi: Add rtl8192du/dm.{c,h}
  wifi: rtlwifi: Add rtl8192du/fw.{c,h} and rtl8192du/led.{c,h}
  wifi: rtlwifi: Add rtl8192du/rf.{c,h}
  wifi: rtlwifi: Add rtl8192du/trx.{c,h}
  wifi: rtlwifi: Add rtl8192du/phy.{c,h}
  wifi: rtlwifi: Add rtl8192du/hw.{c,h}
  wifi: rtlwifi: Add new members to struct rtl_priv for RTL8192DU
  wifi: rtlwifi: Add rtl8192du/table.{c,h}
  ...

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

====================

Link: https://lore.kernel.org/r/20240607093517.41394C2BBFC@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

1 files changed, 43 insertions, 4 deletions

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index cafc664ee531..ecfa65ade226 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -362,6 +362,7 @@ struct ieee80211_vif_chanctx_switch {
  *	status changed.
  * @BSS_CHANGED_MLD_VALID_LINKS: MLD valid links status changed.
  * @BSS_CHANGED_MLD_TTLM: negotiated TID to link mapping was changed
+ * @BSS_CHANGED_TPE: transmit power envelope changed
  */
 enum ieee80211_bss_change {
 	BSS_CHANGED_ASSOC		= 1<<0,
@@ -398,6 +399,7 @@ enum ieee80211_bss_change {
 	BSS_CHANGED_UNSOL_BCAST_PROBE_RESP = 1<<31,
 	BSS_CHANGED_MLD_VALID_LINKS	= BIT_ULL(33),
 	BSS_CHANGED_MLD_TTLM		= BIT_ULL(34),
+	BSS_CHANGED_TPE			= BIT_ULL(35),
 
 	/* when adding here, make sure to change ieee80211_reconfig */
 };
@@ -550,6 +552,39 @@ struct ieee80211_fils_discovery {
 	u32 max_interval;
 };
 
+#define IEEE80211_TPE_EIRP_ENTRIES_320MHZ	5
+struct ieee80211_parsed_tpe_eirp {
+	bool valid;
+	s8 power[IEEE80211_TPE_EIRP_ENTRIES_320MHZ];
+	u8 count;
+};
+
+#define IEEE80211_TPE_PSD_ENTRIES_320MHZ	16
+struct ieee80211_parsed_tpe_psd {
+	bool valid;
+	s8 power[IEEE80211_TPE_PSD_ENTRIES_320MHZ];
+	u8 count, n;
+};
+
+/**
+ * struct ieee80211_parsed_tpe - parsed transmit power envelope information
+ * @max_local: maximum local EIRP, one value for 20, 40, 80, 160, 320 MHz each
+ *	(indexed by TX power category)
+ * @max_reg_client: maximum regulatory client EIRP, one value for 20, 40, 80,
+ *	160, 320 MHz each
+ *	(indexed by TX power category)
+ * @psd_local: maximum local power spectral density, one value for each 20 MHz
+ *	subchannel per bss_conf's chanreq.oper
+ *	(indexed by TX power category)
+ * @psd_reg_client: maximum regulatory power spectral density, one value for
+ *	each 20 MHz subchannel per bss_conf's chanreq.oper
+ *	(indexed by TX power category)
+ */
+struct ieee80211_parsed_tpe {
+	struct ieee80211_parsed_tpe_eirp max_local[2], max_reg_client[2];
+	struct ieee80211_parsed_tpe_psd psd_local[2], psd_reg_client[2];
+};
+
 /**
  * struct ieee80211_bss_conf - holds the BSS's changing parameters
  *
@@ -662,8 +697,7 @@ struct ieee80211_fils_discovery {
  * @beacon_tx_rate: The configured beacon transmit rate that needs to be passed
  *	to driver when rate control is offloaded to firmware.
  * @power_type: power type of BSS for 6 GHz
- * @tx_pwr_env: transmit power envelope array of BSS.
- * @tx_pwr_env_num: number of @tx_pwr_env.
+ * @tpe: transmit power envelope information
  * @pwr_reduction: power constraint of BSS.
  * @eht_support: does this BSS support EHT
  * @csa_active: marks whether a channel switch is going on.
@@ -701,6 +735,9 @@ struct ieee80211_fils_discovery {
  *	beamformee
  * @eht_mu_beamformer: in AP-mode, does this BSS enable operation as an EHT MU
  *	beamformer
+ * @eht_80mhz_full_bw_ul_mumimo: in AP-mode, does this BSS support the
+ *	reception of an EHT TB PPDU on an RU that spans the entire PPDU
+ *	bandwidth
  */
 struct ieee80211_bss_conf {
 	struct ieee80211_vif *vif;
@@ -766,8 +803,9 @@ struct ieee80211_bss_conf {
 	u32 unsol_bcast_probe_resp_interval;
 	struct cfg80211_bitrate_mask beacon_tx_rate;
 	enum ieee80211_ap_reg_power power_type;
-	struct ieee80211_tx_pwr_env tx_pwr_env[IEEE80211_TPE_MAX_IE_COUNT];
-	u8 tx_pwr_env_num;
+
+	struct ieee80211_parsed_tpe tpe;
+
 	u8 pwr_reduction;
 	bool eht_support;
 
@@ -793,6 +831,7 @@ struct ieee80211_bss_conf {
 	bool eht_su_beamformer;
 	bool eht_su_beamformee;
 	bool eht_mu_beamformer;
+	bool eht_80mhz_full_bw_ul_mumimo;
 };
 
 /**