Merge tag 'irqchip-fixes-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent

Pull irqchip fixes from Marc Zyngier:

  - More compatible strings for the Ingenic irqchip (introducing the
    JZ4760B SoC)
  - Select GENERIC_IRQ_MULTI_HANDLER on the ARM ep93xx platform
  - Drop all GENERIC_IRQ_MULTI_HANDLER selections from the irqchip
    Kconfig, now relying on the architecture to get it right
  - Drop the debugfs_file field from struct irq_domain, now that
    debugfs can track things on its own

1 files changed, 68 insertions, 48 deletions

diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index c41cb887eb7d..e91980f49388 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -1442,9 +1442,15 @@ static void requeue_inode(struct inode *inode, struct bdi_writeback *wb,
 }
 
 /*
- * Write out an inode and its dirty pages. Do not update the writeback list
- * linkage. That is left to the caller. The caller is also responsible for
- * setting I_SYNC flag and calling inode_sync_complete() to clear it.
+ * Write out an inode and its dirty pages (or some of its dirty pages, depending
+ * on @wbc->nr_to_write), and clear the relevant dirty flags from i_state.
+ *
+ * This doesn't remove the inode from the writeback list it is on, except
+ * potentially to move it from b_dirty_time to b_dirty due to timestamp
+ * expiration.  The caller is otherwise responsible for writeback list handling.
+ *
+ * The caller is also responsible for setting the I_SYNC flag beforehand and
+ * calling inode_sync_complete() to clear it afterwards.
  */
 static int
 __writeback_single_inode(struct inode *inode, struct writeback_control *wbc)
@@ -1479,7 +1485,7 @@ __writeback_single_inode(struct inode *inode, struct writeback_control *wbc)
 	 * change I_DIRTY_TIME into I_DIRTY_SYNC.
 	 */
 	if ((inode->i_state & I_DIRTY_TIME) &&
-	    (wbc->sync_mode == WB_SYNC_ALL || wbc->for_sync ||
+	    (wbc->sync_mode == WB_SYNC_ALL ||
 	     time_after(jiffies, inode->dirtied_time_when +
 			dirtytime_expire_interval * HZ))) {
 		trace_writeback_lazytime(inode);
@@ -1487,9 +1493,10 @@ __writeback_single_inode(struct inode *inode, struct writeback_control *wbc)
 	}
 
 	/*
-	 * Some filesystems may redirty the inode during the writeback
-	 * due to delalloc, clear dirty metadata flags right before
-	 * write_inode()
+	 * Get and clear the dirty flags from i_state.  This needs to be done
+	 * after calling writepages because some filesystems may redirty the
+	 * inode during writepages due to delalloc.  It also needs to be done
+	 * after handling timestamp expiration, as that may dirty the inode too.
 	 */
 	spin_lock(&inode->i_lock);
 	dirty = inode->i_state & I_DIRTY;
@@ -1524,12 +1531,13 @@ __writeback_single_inode(struct inode *inode, struct writeback_control *wbc)
 }
 
 /*
- * Write out an inode's dirty pages. Either the caller has an active reference
- * on the inode or the inode has I_WILL_FREE set.
+ * Write out an inode's dirty data and metadata on-demand, i.e. separately from
+ * the regular batched writeback done by the flusher threads in
+ * writeback_sb_inodes().  @wbc controls various aspects of the write, such as
+ * whether it is a data-integrity sync (%WB_SYNC_ALL) or not (%WB_SYNC_NONE).
  *
- * This function is designed to be called for writing back one inode which
- * we go e.g. from filesystem. Flusher thread uses __writeback_single_inode()
- * and does more profound writeback list handling in writeback_sb_inodes().
+ * To prevent the inode from going away, either the caller must have a reference
+ * to the inode, or the inode must have I_WILL_FREE or I_FREEING set.
  */
 static int writeback_single_inode(struct inode *inode,
 				  struct writeback_control *wbc)
@@ -1544,23 +1552,23 @@ static int writeback_single_inode(struct inode *inode,
 		WARN_ON(inode->i_state & I_WILL_FREE);
 
 	if (inode->i_state & I_SYNC) {
-		if (wbc->sync_mode != WB_SYNC_ALL)
-			goto out;
 		/*
-		 * It's a data-integrity sync. We must wait. Since callers hold
-		 * inode reference or inode has I_WILL_FREE set, it cannot go
-		 * away under us.
+		 * Writeback is already running on the inode.  For WB_SYNC_NONE,
+		 * that's enough and we can just return.  For WB_SYNC_ALL, we
+		 * must wait for the existing writeback to complete, then do
+		 * writeback again if there's anything left.
 		 */
+		if (wbc->sync_mode != WB_SYNC_ALL)
+			goto out;
 		__inode_wait_for_writeback(inode);
 	}
 	WARN_ON(inode->i_state & I_SYNC);
 	/*
-	 * Skip inode if it is clean and we have no outstanding writeback in
-	 * WB_SYNC_ALL mode. We don't want to mess with writeback lists in this
-	 * function since flusher thread may be doing for example sync in
-	 * parallel and if we move the inode, it could get skipped. So here we
-	 * make sure inode is on some writeback list and leave it there unless
-	 * we have completely cleaned the inode.
+	 * If the inode is already fully clean, then there's nothing to do.
+	 *
+	 * For data-integrity syncs we also need to check whether any pages are
+	 * still under writeback, e.g. due to prior WB_SYNC_NONE writeback.  If
+	 * there are any such pages, we'll need to wait for them.
 	 */
 	if (!(inode->i_state & I_DIRTY_ALL) &&
 	    (wbc->sync_mode != WB_SYNC_ALL ||
@@ -1576,8 +1584,9 @@ static int writeback_single_inode(struct inode *inode,
 	wb = inode_to_wb_and_lock_list(inode);
 	spin_lock(&inode->i_lock);
 	/*
-	 * If inode is clean, remove it from writeback lists. Otherwise don't
-	 * touch it. See comment above for explanation.
+	 * If the inode is now fully clean, then it can be safely removed from
+	 * its writeback list (if any).  Otherwise the flusher threads are
+	 * responsible for the writeback lists.
 	 */
 	if (!(inode->i_state & I_DIRTY_ALL))
 		inode_io_list_del_locked(inode, wb);
@@ -2219,23 +2228,24 @@ static noinline void block_dump___mark_inode_dirty(struct inode *inode)
 }
 
 /**
- * __mark_inode_dirty -	internal function
+ * __mark_inode_dirty -	internal function to mark an inode dirty
  *
  * @inode: inode to mark
- * @flags: what kind of dirty (i.e. I_DIRTY_SYNC)
+ * @flags: what kind of dirty, e.g. I_DIRTY_SYNC.  This can be a combination of
+ *	   multiple I_DIRTY_* flags, except that I_DIRTY_TIME can't be combined
+ *	   with I_DIRTY_PAGES.
  *
- * Mark an inode as dirty. Callers should use mark_inode_dirty or
- * mark_inode_dirty_sync.
+ * Mark an inode as dirty.  We notify the filesystem, then update the inode's
+ * dirty flags.  Then, if needed we add the inode to the appropriate dirty list.
  *
- * Put the inode on the super block's dirty list.
+ * Most callers should use mark_inode_dirty() or mark_inode_dirty_sync()
+ * instead of calling this directly.
  *
- * CAREFUL! We mark it dirty unconditionally, but move it onto the
- * dirty list only if it is hashed or if it refers to a blockdev.
- * If it was not hashed, it will never be added to the dirty list
- * even if it is later hashed, as it will have been marked dirty already.
+ * CAREFUL!  We only add the inode to the dirty list if it is hashed or if it
+ * refers to a blockdev.  Unhashed inodes will never be added to the dirty list
+ * even if they are later hashed, as they will have been marked dirty already.
  *
- * In short, make sure you hash any inodes _before_ you start marking
- * them dirty.
+ * In short, ensure you hash any inodes _before_ you start marking them dirty.
  *
  * Note that for blockdevs, inode->dirtied_when represents the dirtying time of
  * the block-special inode (/dev/hda1) itself.  And the ->dirtied_when field of
@@ -2247,25 +2257,34 @@ static noinline void block_dump___mark_inode_dirty(struct inode *inode)
 void __mark_inode_dirty(struct inode *inode, int flags)
 {
 	struct super_block *sb = inode->i_sb;
-	int dirtytime;
+	int dirtytime = 0;
 
 	trace_writeback_mark_inode_dirty(inode, flags);
 
-	/*
-	 * Don't do this for I_DIRTY_PAGES - that doesn't actually
-	 * dirty the inode itself
-	 */
-	if (flags & (I_DIRTY_INODE | I_DIRTY_TIME)) {
+	if (flags & I_DIRTY_INODE) {
+		/*
+		 * Notify the filesystem about the inode being dirtied, so that
+		 * (if needed) it can update on-disk fields and journal the
+		 * inode.  This is only needed when the inode itself is being
+		 * dirtied now.  I.e. it's only needed for I_DIRTY_INODE, not
+		 * for just I_DIRTY_PAGES or I_DIRTY_TIME.
+		 */
 		trace_writeback_dirty_inode_start(inode, flags);
-
 		if (sb->s_op->dirty_inode)
-			sb->s_op->dirty_inode(inode, flags);
-
+			sb->s_op->dirty_inode(inode, flags & I_DIRTY_INODE);
 		trace_writeback_dirty_inode(inode, flags);
-	}
-	if (flags & I_DIRTY_INODE)
+
+		/* I_DIRTY_INODE supersedes I_DIRTY_TIME. */
 		flags &= ~I_DIRTY_TIME;
-	dirtytime = flags & I_DIRTY_TIME;
+	} else {
+		/*
+		 * Else it's either I_DIRTY_PAGES, I_DIRTY_TIME, or nothing.
+		 * (We don't support setting both I_DIRTY_PAGES and I_DIRTY_TIME
+		 * in one call to __mark_inode_dirty().)
+		 */
+		dirtytime = flags & I_DIRTY_TIME;
+		WARN_ON_ONCE(dirtytime && flags != I_DIRTY_TIME);
+	}
 
 	/*
 	 * Paired with smp_mb() in __writeback_single_inode() for the
@@ -2288,6 +2307,7 @@ void __mark_inode_dirty(struct inode *inode, int flags)
 
 		inode_attach_wb(inode, NULL);
 
+		/* I_DIRTY_INODE supersedes I_DIRTY_TIME. */
 		if (flags & I_DIRTY_INODE)
 			inode->i_state &= ~I_DIRTY_TIME;
 		inode->i_state |= flags;