Merge tag 'usb-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v3.11 merge window

All function drivers are now converted to our new configfs-based
binding. Eventually this will help us getting rid of in-kernel
gadget drivers and only keep function drivers in the kernel.

MUSB was taught that it needs to be built for host-only and
device-only modes too. We had this support long ago but it
involved a ridiculous amount of ifdefs. Now we have a much
cleaner approach.

Samsung Exynos4 platform now implements HSIC support.

We're introducing support for AB8540 and AB9540 PHYs.

MUSB module reinsertion now works as expected, before we were
getting -EBUSY being returned by the resource checks done on
driver core.

DWC3 now has minimum support for TI's AM437x series of SoCs.

OMAP5 USB3 PHY learned one extra DPLL configuration values because
that PHY is reused in TI's DRA7xx devices.

We're introducing support for Faraday fotg210 UDCs.

Last, but not least, the usual set of non-critical fixes and cleanups
ranging from usage of platform_{get,set}_drvdata to lock improvements.

Signed-of-by: Felipe Balbi <balbi@ti.com>

1 files changed, 48 insertions, 89 deletions

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 37a261a6bb6a..29a24ced6748 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -380,7 +380,6 @@ static void musb_otg_timer_func(unsigned long data)
 		dev_dbg(musb->controller, "HNP: Unhandled mode %s\n",
 			usb_otg_state_string(musb->xceiv->state));
 	}
-	musb->ignore_disconnect = 0;
 	spin_unlock_irqrestore(&musb->lock, flags);
 }
 
@@ -389,7 +388,7 @@ static void musb_otg_timer_func(unsigned long data)
  */
 void musb_hnp_stop(struct musb *musb)
 {
-	struct usb_hcd	*hcd = musb_to_hcd(musb);
+	struct usb_hcd	*hcd = musb->hcd;
 	void __iomem	*mbase = musb->mregs;
 	u8	reg;
 
@@ -404,7 +403,8 @@ void musb_hnp_stop(struct musb *musb)
 		break;
 	case OTG_STATE_B_HOST:
 		dev_dbg(musb->controller, "HNP: Disabling HR\n");
-		hcd->self.is_b_host = 0;
+		if (hcd)
+			hcd->self.is_b_host = 0;
 		musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
 		MUSB_DEV_MODE(musb);
 		reg = musb_readb(mbase, MUSB_POWER);
@@ -484,7 +484,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 
 				musb->xceiv->state = OTG_STATE_A_HOST;
 				musb->is_active = 1;
-				usb_hcd_resume_root_hub(musb_to_hcd(musb));
+				musb_host_resume_root_hub(musb);
 				break;
 			case OTG_STATE_B_WAIT_ACON:
 				musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
@@ -501,7 +501,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 			case OTG_STATE_A_SUSPEND:
 				/* possibly DISCONNECT is upcoming */
 				musb->xceiv->state = OTG_STATE_A_HOST;
-				usb_hcd_resume_root_hub(musb_to_hcd(musb));
+				musb_host_resume_root_hub(musb);
 				break;
 			case OTG_STATE_B_WAIT_ACON:
 			case OTG_STATE_B_PERIPHERAL:
@@ -643,7 +643,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 			 * undesired detour through A_WAIT_BCON.
 			 */
 			musb_hnp_stop(musb);
-			usb_hcd_resume_root_hub(musb_to_hcd(musb));
+			musb_host_resume_root_hub(musb);
 			musb_root_disconnect(musb);
 			musb_platform_try_idle(musb, jiffies
 					+ msecs_to_jiffies(musb->a_wait_bcon
@@ -685,7 +685,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 	}
 
 	if (int_usb & MUSB_INTR_CONNECT) {
-		struct usb_hcd *hcd = musb_to_hcd(musb);
+		struct usb_hcd *hcd = musb->hcd;
 
 		handled = IRQ_HANDLED;
 		musb->is_active = 1;
@@ -726,31 +726,27 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 			dev_dbg(musb->controller, "HNP: CONNECT, now b_host\n");
 b_host:
 			musb->xceiv->state = OTG_STATE_B_HOST;
-			hcd->self.is_b_host = 1;
-			musb->ignore_disconnect = 0;
+			if (musb->hcd)
+				musb->hcd->self.is_b_host = 1;
 			del_timer(&musb->otg_timer);
 			break;
 		default:
 			if ((devctl & MUSB_DEVCTL_VBUS)
 					== (3 << MUSB_DEVCTL_VBUS_SHIFT)) {
 				musb->xceiv->state = OTG_STATE_A_HOST;
-				hcd->self.is_b_host = 0;
+				if (hcd)
+					hcd->self.is_b_host = 0;
 			}
 			break;
 		}
 
-		/* poke the root hub */
-		MUSB_HST_MODE(musb);
-		if (hcd->status_urb)
-			usb_hcd_poll_rh_status(hcd);
-		else
-			usb_hcd_resume_root_hub(hcd);
+		musb_host_poke_root_hub(musb);
 
 		dev_dbg(musb->controller, "CONNECT (%s) devctl %02x\n",
 				usb_otg_state_string(musb->xceiv->state), devctl);
 	}
 
-	if ((int_usb & MUSB_INTR_DISCONNECT) && !musb->ignore_disconnect) {
+	if (int_usb & MUSB_INTR_DISCONNECT) {
 		dev_dbg(musb->controller, "DISCONNECT (%s) as %s, devctl %02x\n",
 				usb_otg_state_string(musb->xceiv->state),
 				MUSB_MODE(musb), devctl);
@@ -759,7 +755,7 @@ b_host:
 		switch (musb->xceiv->state) {
 		case OTG_STATE_A_HOST:
 		case OTG_STATE_A_SUSPEND:
-			usb_hcd_resume_root_hub(musb_to_hcd(musb));
+			musb_host_resume_root_hub(musb);
 			musb_root_disconnect(musb);
 			if (musb->a_wait_bcon != 0)
 				musb_platform_try_idle(musb, jiffies
@@ -772,7 +768,8 @@ b_host:
 			 * in hnp_stop() is currently not used...
 			 */
 			musb_root_disconnect(musb);
-			musb_to_hcd(musb)->self.is_b_host = 0;
+			if (musb->hcd)
+				musb->hcd->self.is_b_host = 0;
 			musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
 			MUSB_DEV_MODE(musb);
 			musb_g_disconnect(musb);
@@ -818,11 +815,6 @@ b_host:
 				usb_otg_state_string(musb->xceiv->state));
 			switch (musb->xceiv->state) {
 			case OTG_STATE_A_SUSPEND:
-				/* We need to ignore disconnect on suspend
-				 * otherwise tusb 2.0 won't reconnect after a
-				 * power cycle, which breaks otg compliance.
-				 */
-				musb->ignore_disconnect = 1;
 				musb_g_reset(musb);
 				/* FALLTHROUGH */
 			case OTG_STATE_A_WAIT_BCON:	/* OPT TD.4.7-900ms */
@@ -834,7 +826,6 @@ b_host:
 					+ msecs_to_jiffies(TA_WAIT_BCON(musb)));
 				break;
 			case OTG_STATE_A_PERIPHERAL:
-				musb->ignore_disconnect = 0;
 				del_timer(&musb->otg_timer);
 				musb_g_reset(musb);
 				break;
@@ -909,51 +900,6 @@ b_host:
 
 /*-------------------------------------------------------------------------*/
 
-/*
-* Program the HDRC to start (enable interrupts, dma, etc.).
-*/
-void musb_start(struct musb *musb)
-{
-	void __iomem	*regs = musb->mregs;
-	u8		devctl = musb_readb(regs, MUSB_DEVCTL);
-
-	dev_dbg(musb->controller, "<== devctl %02x\n", devctl);
-
-	/*  Set INT enable registers, enable interrupts */
-	musb->intrtxe = musb->epmask;
-	musb_writew(regs, MUSB_INTRTXE, musb->intrtxe);
-	musb->intrrxe = musb->epmask & 0xfffe;
-	musb_writew(regs, MUSB_INTRRXE, musb->intrrxe);
-	musb_writeb(regs, MUSB_INTRUSBE, 0xf7);
-
-	musb_writeb(regs, MUSB_TESTMODE, 0);
-
-	/* put into basic highspeed mode and start session */
-	musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE
-						| MUSB_POWER_HSENAB
-						/* ENSUSPEND wedges tusb */
-						/* | MUSB_POWER_ENSUSPEND */
-						);
-
-	musb->is_active = 0;
-	devctl = musb_readb(regs, MUSB_DEVCTL);
-	devctl &= ~MUSB_DEVCTL_SESSION;
-
-	/* session started after:
-	 * (a) ID-grounded irq, host mode;
-	 * (b) vbus present/connect IRQ, peripheral mode;
-	 * (c) peripheral initiates, using SRP
-	 */
-	if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
-		musb->is_active = 1;
-	else
-		devctl |= MUSB_DEVCTL_SESSION;
-
-	musb_platform_enable(musb);
-	musb_writeb(regs, MUSB_DEVCTL, devctl);
-}
-
-
 static void musb_generic_disable(struct musb *musb)
 {
 	void __iomem	*mbase = musb->mregs;
@@ -1007,6 +953,7 @@ static void musb_shutdown(struct platform_device *pdev)
 
 	pm_runtime_get_sync(musb->controller);
 
+	musb_host_cleanup(musb);
 	musb_gadget_cleanup(musb);
 
 	spin_lock_irqsave(&musb->lock, flags);
@@ -1763,24 +1710,18 @@ static struct musb *allocate_instance(struct device *dev,
 	struct musb		*musb;
 	struct musb_hw_ep	*ep;
 	int			epnum;
-	struct usb_hcd	*hcd;
+	int			ret;
 
-	hcd = usb_create_hcd(&musb_hc_driver, dev, dev_name(dev));
-	if (!hcd)
+	musb = devm_kzalloc(dev, sizeof(*musb), GFP_KERNEL);
+	if (!musb)
 		return NULL;
-	/* usbcore sets dev->driver_data to hcd, and sometimes uses that... */
 
-	musb = hcd_to_musb(hcd);
 	INIT_LIST_HEAD(&musb->control);
 	INIT_LIST_HEAD(&musb->in_bulk);
 	INIT_LIST_HEAD(&musb->out_bulk);
 
-	hcd->uses_new_polling = 1;
-	hcd->has_tt = 1;
-
 	musb->vbuserr_retry = VBUSERR_RETRY_COUNT;
 	musb->a_wait_bcon = OTG_TIME_A_WAIT_BCON;
-	dev_set_drvdata(dev, musb);
 	musb->mregs = mbase;
 	musb->ctrl_base = mbase;
 	musb->nIrq = -ENODEV;
@@ -1795,7 +1736,16 @@ static struct musb *allocate_instance(struct device *dev,
 
 	musb->controller = dev;
 
+	ret = musb_host_alloc(musb);
+	if (ret < 0)
+		goto err_free;
+
+	dev_set_drvdata(dev, musb);
+
 	return musb;
+
+err_free:
+	return NULL;
 }
 
 static void musb_free(struct musb *musb)
@@ -1821,7 +1771,7 @@ static void musb_free(struct musb *musb)
 		dma_controller_destroy(c);
 	}
 
-	usb_put_hcd(musb_to_hcd(musb));
+	musb_host_free(musb);
 }
 
 /*
@@ -1838,7 +1788,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 	int			status;
 	struct musb		*musb;
 	struct musb_hdrc_platform_data *plat = dev->platform_data;
-	struct usb_hcd		*hcd;
 
 	/* The driver might handle more features than the board; OK.
 	 * Fail when the board needs a feature that's not enabled.
@@ -1864,6 +1813,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 	musb->board_set_power = plat->set_power;
 	musb->min_power = plat->min_power;
 	musb->ops = plat->platform_ops;
+	musb->port_mode = plat->mode;
 
 	/* The musb_platform_init() call:
 	 *   - adjusts musb->mregs
@@ -1939,13 +1889,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 		musb->irq_wake = 0;
 	}
 
-	/* host side needs more setup */
-	hcd = musb_to_hcd(musb);
-	otg_set_host(musb->xceiv->otg, &hcd->self);
-	hcd->self.otg_port = 1;
-	musb->xceiv->otg->host = &hcd->self;
-	hcd->power_budget = 2 * (plat->power ? : 250);
-
 	/* program PHY to use external vBus if required */
 	if (plat->extvbus) {
 		u8 busctl = musb_read_ulpi_buscontrol(musb->mregs);
@@ -1961,7 +1904,23 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 		musb->xceiv->state = OTG_STATE_B_IDLE;
 	}
 
-	status = musb_gadget_setup(musb);
+	switch (musb->port_mode) {
+	case MUSB_PORT_MODE_HOST:
+		status = musb_host_setup(musb, plat->power);
+		break;
+	case MUSB_PORT_MODE_GADGET:
+		status = musb_gadget_setup(musb);
+		break;
+	case MUSB_PORT_MODE_DUAL_ROLE:
+		status = musb_host_setup(musb, plat->power);
+		if (status < 0)
+			goto fail3;
+		status = musb_gadget_setup(musb);
+		break;
+	default:
+		dev_err(dev, "unsupported port mode %d\n", musb->port_mode);
+		break;
+	}
 
 	if (status < 0)
 		goto fail3;