Merge 6.1-rc6 into tty-next

We need the tty/serial fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

9 files changed, 139 insertions, 91 deletions

diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 4ef88e6b1870..daf12132deb1 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -304,7 +304,7 @@ struct gsm_mux {
 	bool constipated;		/* Asked by remote to shut up */
 	bool has_devices;		/* Devices were registered */
 
-	struct mutex tx_mutex;
+	spinlock_t tx_lock;
 	unsigned int tx_bytes;		/* TX data outstanding */
 #define TX_THRESH_HI		8192
 #define TX_THRESH_LO		2048
@@ -312,7 +312,7 @@ struct gsm_mux {
 	struct list_head tx_data_list;	/* Pending data packets */
 
 	/* Control messages */
-	struct delayed_work kick_timeout;	/* Kick TX queuing on timeout */
+	struct timer_list kick_timer;	/* Kick TX queuing on timeout */
 	struct timer_list t2_timer;	/* Retransmit timer for commands */
 	int cretries;			/* Command retry counter */
 	struct gsm_control *pending_cmd;/* Our current pending command */
@@ -794,6 +794,7 @@ static int gsm_send(struct gsm_mux *gsm, int addr, int cr, int control)
 	struct gsm_msg *msg;
 	u8 *dp;
 	int ocr;
+	unsigned long flags;
 
 	msg = gsm_data_alloc(gsm, addr, 0, control);
 	if (!msg)
@@ -815,10 +816,10 @@ static int gsm_send(struct gsm_mux *gsm, int addr, int cr, int control)
 
 	gsm_print_packet("Q->", addr, cr, control, NULL, 0);
 
-	mutex_lock(&gsm->tx_mutex);
+	spin_lock_irqsave(&gsm->tx_lock, flags);
 	list_add_tail(&msg->list, &gsm->tx_ctrl_list);
 	gsm->tx_bytes += msg->len;
-	mutex_unlock(&gsm->tx_mutex);
+	spin_unlock_irqrestore(&gsm->tx_lock, flags);
 	gsmld_write_trigger(gsm);
 
 	return 0;
@@ -843,7 +844,7 @@ static void gsm_dlci_clear_queues(struct gsm_mux *gsm, struct gsm_dlci *dlci)
 	spin_unlock_irqrestore(&dlci->lock, flags);
 
 	/* Clear data packets in MUX write queue */
-	mutex_lock(&gsm->tx_mutex);
+	spin_lock_irqsave(&gsm->tx_lock, flags);
 	list_for_each_entry_safe(msg, nmsg, &gsm->tx_data_list, list) {
 		if (msg->addr != addr)
 			continue;
@@ -851,7 +852,7 @@ static void gsm_dlci_clear_queues(struct gsm_mux *gsm, struct gsm_dlci *dlci)
 		list_del(&msg->list);
 		kfree(msg);
 	}
-	mutex_unlock(&gsm->tx_mutex);
+	spin_unlock_irqrestore(&gsm->tx_lock, flags);
 }
 
 /**
@@ -1122,7 +1123,7 @@ static void __gsm_data_queue(struct gsm_dlci *dlci, struct gsm_msg *msg)
 	gsm->tx_bytes += msg->len;
 
 	gsmld_write_trigger(gsm);
-	schedule_delayed_work(&gsm->kick_timeout, 10 * gsm->t1 * HZ / 100);
+	mod_timer(&gsm->kick_timer, jiffies + 10 * gsm->t1 * HZ / 100);
 }
 
 /**
@@ -1137,9 +1138,10 @@ static void __gsm_data_queue(struct gsm_dlci *dlci, struct gsm_msg *msg)
 
 static void gsm_data_queue(struct gsm_dlci *dlci, struct gsm_msg *msg)
 {
-	mutex_lock(&dlci->gsm->tx_mutex);
+	unsigned long flags;
+	spin_lock_irqsave(&dlci->gsm->tx_lock, flags);
 	__gsm_data_queue(dlci, msg);
-	mutex_unlock(&dlci->gsm->tx_mutex);
+	spin_unlock_irqrestore(&dlci->gsm->tx_lock, flags);
 }
 
 /**
@@ -1151,7 +1153,7 @@ static void gsm_data_queue(struct gsm_dlci *dlci, struct gsm_msg *msg)
  *	is data. Keep to the MRU of the mux. This path handles the usual tty
  *	interface which is a byte stream with optional modem data.
  *
- *	Caller must hold the tx_mutex of the mux.
+ *	Caller must hold the tx_lock of the mux.
  */
 
 static int gsm_dlci_data_output(struct gsm_mux *gsm, struct gsm_dlci *dlci)
@@ -1211,7 +1213,7 @@ static int gsm_dlci_data_output(struct gsm_mux *gsm, struct gsm_dlci *dlci)
  *	is data. Keep to the MRU of the mux. This path handles framed data
  *	queued as skbuffs to the DLCI.
  *
- *	Caller must hold the tx_mutex of the mux.
+ *	Caller must hold the tx_lock of the mux.
  */
 
 static int gsm_dlci_data_output_framed(struct gsm_mux *gsm,
@@ -1227,7 +1229,7 @@ static int gsm_dlci_data_output_framed(struct gsm_mux *gsm,
 	if (dlci->adaption == 4)
 		overhead = 1;
 
-	/* dlci->skb is locked by tx_mutex */
+	/* dlci->skb is locked by tx_lock */
 	if (dlci->skb == NULL) {
 		dlci->skb = skb_dequeue_tail(&dlci->skb_list);
 		if (dlci->skb == NULL)
@@ -1281,7 +1283,7 @@ static int gsm_dlci_data_output_framed(struct gsm_mux *gsm,
  *	Push an empty frame in to the transmit queue to update the modem status
  *	bits and to transmit an optional break.
  *
- *	Caller must hold the tx_mutex of the mux.
+ *	Caller must hold the tx_lock of the mux.
  */
 
 static int gsm_dlci_modem_output(struct gsm_mux *gsm, struct gsm_dlci *dlci,
@@ -1395,12 +1397,13 @@ static int gsm_dlci_data_sweep(struct gsm_mux *gsm)
 
 static void gsm_dlci_data_kick(struct gsm_dlci *dlci)
 {
+	unsigned long flags;
 	int sweep;
 
 	if (dlci->constipated)
 		return;
 
-	mutex_lock(&dlci->gsm->tx_mutex);
+	spin_lock_irqsave(&dlci->gsm->tx_lock, flags);
 	/* If we have nothing running then we need to fire up */
 	sweep = (dlci->gsm->tx_bytes < TX_THRESH_LO);
 	if (dlci->gsm->tx_bytes == 0) {
@@ -1411,7 +1414,7 @@ static void gsm_dlci_data_kick(struct gsm_dlci *dlci)
 	}
 	if (sweep)
 		gsm_dlci_data_sweep(dlci->gsm);
-	mutex_unlock(&dlci->gsm->tx_mutex);
+	spin_unlock_irqrestore(&dlci->gsm->tx_lock, flags);
 }
 
 /*
@@ -1980,7 +1983,7 @@ static struct gsm_control *gsm_control_send(struct gsm_mux *gsm,
 		unsigned int command, u8 *data, int clen)
 {
 	struct gsm_control *ctrl = kzalloc(sizeof(struct gsm_control),
-						GFP_KERNEL);
+						GFP_ATOMIC);
 	unsigned long flags;
 	if (ctrl == NULL)
 		return NULL;
@@ -2354,23 +2357,24 @@ static void gsm_dlci_command(struct gsm_dlci *dlci, const u8 *data, int len)
 }
 
 /**
- *	gsm_kick_timeout	-	transmit if possible
- *	@work: work contained in our gsm object
+ *	gsm_kick_timer	-	transmit if possible
+ *	@t: timer contained in our gsm object
  *
  *	Transmit data from DLCIs if the queue is empty. We can't rely on
  *	a tty wakeup except when we filled the pipe so we need to fire off
  *	new data ourselves in other cases.
  */
-static void gsm_kick_timeout(struct work_struct *work)
+static void gsm_kick_timer(struct timer_list *t)
 {
-	struct gsm_mux *gsm = container_of(work, struct gsm_mux, kick_timeout.work);
+	struct gsm_mux *gsm = from_timer(gsm, t, kick_timer);
+	unsigned long flags;
 	int sent = 0;
 
-	mutex_lock(&gsm->tx_mutex);
+	spin_lock_irqsave(&gsm->tx_lock, flags);
 	/* If we have nothing running then we need to fire up */
 	if (gsm->tx_bytes < TX_THRESH_LO)
 		sent = gsm_dlci_data_sweep(gsm);
-	mutex_unlock(&gsm->tx_mutex);
+	spin_unlock_irqrestore(&gsm->tx_lock, flags);
 
 	if (sent && debug & DBG_DATA)
 		pr_info("%s TX queue stalled\n", __func__);
@@ -2834,7 +2838,7 @@ static void gsm_cleanup_mux(struct gsm_mux *gsm, bool disc)
 	}
 
 	/* Finish outstanding timers, making sure they are done */
-	cancel_delayed_work_sync(&gsm->kick_timeout);
+	del_timer_sync(&gsm->kick_timer);
 	del_timer_sync(&gsm->t2_timer);
 
 	/* Finish writing to ldisc */
@@ -2907,7 +2911,6 @@ static void gsm_free_mux(struct gsm_mux *gsm)
 			break;
 		}
 	}
-	mutex_destroy(&gsm->tx_mutex);
 	mutex_destroy(&gsm->mutex);
 	kfree(gsm->txframe);
 	kfree(gsm->buf);
@@ -2979,15 +2982,15 @@ static struct gsm_mux *gsm_alloc_mux(void)
 	}
 	spin_lock_init(&gsm->lock);
 	mutex_init(&gsm->mutex);
-	mutex_init(&gsm->tx_mutex);
 	kref_init(&gsm->ref);
 	INIT_LIST_HEAD(&gsm->tx_ctrl_list);
 	INIT_LIST_HEAD(&gsm->tx_data_list);
-	INIT_DELAYED_WORK(&gsm->kick_timeout, gsm_kick_timeout);
+	timer_setup(&gsm->kick_timer, gsm_kick_timer, 0);
 	timer_setup(&gsm->t2_timer, gsm_control_retransmit, 0);
 	INIT_WORK(&gsm->tx_work, gsmld_write_task);
 	init_waitqueue_head(&gsm->event);
 	spin_lock_init(&gsm->control_lock);
+	spin_lock_init(&gsm->tx_lock);
 
 	gsm->t1 = T1;
 	gsm->t2 = T2;
@@ -3014,7 +3017,6 @@ static struct gsm_mux *gsm_alloc_mux(void)
 	}
 	spin_unlock(&gsm_mux_lock);
 	if (i == MAX_MUX) {
-		mutex_destroy(&gsm->tx_mutex);
 		mutex_destroy(&gsm->mutex);
 		kfree(gsm->txframe);
 		kfree(gsm->buf);
@@ -3180,16 +3182,17 @@ static void gsmld_write_trigger(struct gsm_mux *gsm)
 static void gsmld_write_task(struct work_struct *work)
 {
 	struct gsm_mux *gsm = container_of(work, struct gsm_mux, tx_work);
+	unsigned long flags;
 	int i, ret;
 
 	/* All outstanding control channel and control messages and one data
 	 * frame is sent.
 	 */
 	ret = -ENODEV;
-	mutex_lock(&gsm->tx_mutex);
+	spin_lock_irqsave(&gsm->tx_lock, flags);
 	if (gsm->tty)
 		ret = gsm_data_kick(gsm);
-	mutex_unlock(&gsm->tx_mutex);
+	spin_unlock_irqrestore(&gsm->tx_lock, flags);
 
 	if (ret >= 0)
 		for (i = 0; i < NUM_DLCI; i++)
@@ -3396,6 +3399,7 @@ static ssize_t gsmld_write(struct tty_struct *tty, struct file *file,
 			   const unsigned char *buf, size_t nr)
 {
 	struct gsm_mux *gsm = tty->disc_data;
+	unsigned long flags;
 	int space;
 	int ret;
 
@@ -3403,13 +3407,13 @@ static ssize_t gsmld_write(struct tty_struct *tty, struct file *file,
 		return -ENODEV;
 
 	ret = -ENOBUFS;
-	mutex_lock(&gsm->tx_mutex);
+	spin_lock_irqsave(&gsm->tx_lock, flags);
 	space = tty_write_room(tty);
 	if (space >= nr)
 		ret = tty->ops->write(tty, buf, nr);
 	else
 		set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
-	mutex_unlock(&gsm->tx_mutex);
+	spin_unlock_irqrestore(&gsm->tx_lock, flags);
 
 	return ret;
 }
@@ -3706,13 +3710,14 @@ static struct tty_ldisc_ops tty_ldisc_packet = {
 static void gsm_modem_upd_via_data(struct gsm_dlci *dlci, u8 brk)
 {
 	struct gsm_mux *gsm = dlci->gsm;
+	unsigned long flags;
 
 	if (dlci->state != DLCI_OPEN || dlci->adaption != 2)
 		return;
 
-	mutex_lock(&gsm->tx_mutex);
+	spin_lock_irqsave(&gsm->tx_lock, flags);
 	gsm_dlci_modem_output(gsm, dlci, brk);
-	mutex_unlock(&gsm->tx_mutex);
+	spin_unlock_irqrestore(&gsm->tx_lock, flags);
 }
 
 /**
diff --git a/drivers/tty/serial/8250/8250_lpss.c b/drivers/tty/serial/8250/8250_lpss.c
index 44cc755b1a29..0e43bdfb7459 100644
--- a/drivers/tty/serial/8250/8250_lpss.c
+++ b/drivers/tty/serial/8250/8250_lpss.c
@@ -174,6 +174,8 @@ static int ehl_serial_setup(struct lpss8250 *lpss, struct uart_port *port)
 	 */
 	up->dma = dma;
 
+	lpss->dma_maxburst = 16;
+
 	port->set_termios = dw8250_do_set_termios;
 
 	return 0;
@@ -277,8 +279,13 @@ static int lpss8250_dma_setup(struct lpss8250 *lpss, struct uart_8250_port *port
 	struct dw_dma_slave *rx_param, *tx_param;
 	struct device *dev = port->port.dev;
 
-	if (!lpss->dma_param.dma_dev)
+	if (!lpss->dma_param.dma_dev) {
+		dma = port->dma;
+		if (dma)
+			goto out_configuration_only;
+
 		return 0;
+	}
 
 	rx_param = devm_kzalloc(dev, sizeof(*rx_param), GFP_KERNEL);
 	if (!rx_param)
@@ -289,16 +296,18 @@ static int lpss8250_dma_setup(struct lpss8250 *lpss, struct uart_8250_port *port
 		return -ENOMEM;
 
 	*rx_param = lpss->dma_param;
-	dma->rxconf.src_maxburst = lpss->dma_maxburst;
-
 	*tx_param = lpss->dma_param;
-	dma->txconf.dst_maxburst = lpss->dma_maxburst;
 
 	dma->fn = lpss8250_dma_filter;
 	dma->rx_param = rx_param;
 	dma->tx_param = tx_param;
 
 	port->dma = dma;
+
+out_configuration_only:
+	dma->rxconf.src_maxburst = lpss->dma_maxburst;
+	dma->txconf.dst_maxburst = lpss->dma_maxburst;
+
 	return 0;
 }
 
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index 7bb9da7558a1..734f092ef839 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -164,7 +164,11 @@ static u32 uart_read(struct uart_8250_port *up, u32 reg)
 	return readl(up->port.membase + (reg << up->port.regshift));
 }
 
-static void omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
+/*
+ * Called on runtime PM resume path from omap8250_restore_regs(), and
+ * omap8250_set_mctrl().
+ */
+static void __omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {
 	struct uart_8250_port *up = up_to_u8250p(port);
 	struct omap8250_priv *priv = up->port.private_data;
@@ -188,6 +192,20 @@ static void omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
 	}
 }
 
+static void omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	int err;
+
+	err = pm_runtime_resume_and_get(port->dev);
+	if (err)
+		return;
+
+	__omap8250_set_mctrl(port, mctrl);
+
+	pm_runtime_mark_last_busy(port->dev);
+	pm_runtime_put_autosuspend(port->dev);
+}
+
 /*
  * Work Around for Errata i202 (2430, 3430, 3630, 4430 and 4460)
  * The access to uart register after MDR1 Access
@@ -200,27 +218,10 @@ static void omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
 static void omap_8250_mdr1_errataset(struct uart_8250_port *up,
 				     struct omap8250_priv *priv)
 {
-	u8 timeout = 255;
-
 	serial_out(up, UART_OMAP_MDR1, priv->mdr1);
 	udelay(2);
 	serial_out(up, UART_FCR, up->fcr | UART_FCR_CLEAR_XMIT |
 			UART_FCR_CLEAR_RCVR);
-	/*
-	 * Wait for FIFO to empty: when empty, RX_FIFO_E bit is 0 and
-	 * TX_FIFO_E bit is 1.
-	 */
-	while (UART_LSR_THRE != (serial_in(up, UART_LSR) &
-				(UART_LSR_THRE | UART_LSR_DR))) {
-		timeout--;
-		if (!timeout) {
-			/* Should *never* happen. we warn and carry on */
-			dev_crit(up->port.dev, "Errata i202: timedout %x\n",
-				 serial_in(up, UART_LSR));
-			break;
-		}
-		udelay(1);
-	}
 }
 
 static void omap_8250_get_divisor(struct uart_port *port, unsigned int baud,
@@ -299,6 +300,7 @@ static void omap8250_restore_regs(struct uart_8250_port *up)
 {
 	struct omap8250_priv *priv = up->port.private_data;
 	struct uart_8250_dma	*dma = up->dma;
+	u8 mcr = serial8250_in_MCR(up);
 
 	if (dma && dma->tx_running) {
 		/*
@@ -315,7 +317,7 @@ static void omap8250_restore_regs(struct uart_8250_port *up)
 	serial_out(up, UART_EFR, UART_EFR_ECB);
 
 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
-	serial8250_out_MCR(up, UART_MCR_TCRTLR);
+	serial8250_out_MCR(up, mcr | UART_MCR_TCRTLR);
 	serial_out(up, UART_FCR, up->fcr);
 
 	omap8250_update_scr(up, priv);
@@ -331,7 +333,8 @@ static void omap8250_restore_regs(struct uart_8250_port *up)
 	serial_out(up, UART_LCR, 0);
 
 	/* drop TCR + TLR access, we setup XON/XOFF later */
-	serial8250_out_MCR(up, up->mcr);
+	serial8250_out_MCR(up, mcr);
+
 	serial_out(up, UART_IER, up->ier);
 
 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
@@ -348,7 +351,7 @@ static void omap8250_restore_regs(struct uart_8250_port *up)
 
 	omap8250_update_mdr1(up, priv);
 
-	up->port.ops->set_mctrl(&up->port, up->port.mctrl);
+	__omap8250_set_mctrl(&up->port, up->port.mctrl);
 
 	serial_out(up, UART_OMAP_MDR3, priv->mdr3);
 
@@ -679,7 +682,6 @@ static int omap_8250_startup(struct uart_port *port)
 
 	pm_runtime_get_sync(port->dev);
 
-	up->mcr = 0;
 	serial_out(up, UART_FCR, UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
 
 	serial_out(up, UART_LCR, UART_LCR_WLEN8);
@@ -1537,9 +1539,15 @@ err:
 static int omap8250_remove(struct platform_device *pdev)
 {
 	struct omap8250_priv *priv = platform_get_drvdata(pdev);
+	int err;
+
+	err = pm_runtime_resume_and_get(&pdev->dev);
+	if (err)
+		return err;
 
 	pm_runtime_dont_use_autosuspend(&pdev->dev);
 	pm_runtime_put_sync(&pdev->dev);
+	flush_work(&priv->qos_work);
 	pm_runtime_disable(&pdev->dev);
 	serial8250_unregister_port(priv->line);
 	cpu_latency_qos_remove_request(&priv->pm_qos_request);
diff --git a/drivers/tty/serial/8250/8250_gsc.c b/drivers/tty/serial/8250/8250_parisc.c
index 948d0a1c6ae8..948d0a1c6ae8 100644
--- a/drivers/tty/serial/8250/8250_gsc.c
+++ b/drivers/tty/serial/8250/8250_parisc.c
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index b94e60e75326..beba8f38b3dc 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1896,10 +1896,13 @@ EXPORT_SYMBOL_GPL(serial8250_modem_status);
 static bool handle_rx_dma(struct uart_8250_port *up, unsigned int iir)
 {
 	switch (iir & 0x3f) {
-	case UART_IIR_RX_TIMEOUT:
-		serial8250_rx_dma_flush(up);
+	case UART_IIR_RDI:
+		if (!up->dma->rx_running)
+			break;
 		fallthrough;
 	case UART_IIR_RLSI:
+	case UART_IIR_RX_TIMEOUT:
+		serial8250_rx_dma_flush(up);
 		return true;
 	}
 	return up->dma->rx_dma(up);
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index d0b49e15fbf5..b0f62345bc84 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -116,9 +116,9 @@ config SERIAL_8250_CONSOLE
 
 	  If unsure, say N.
 
-config SERIAL_8250_GSC
+config SERIAL_8250_PARISC
 	tristate
-	depends on SERIAL_8250 && GSC
+	depends on SERIAL_8250 && PARISC
 	default SERIAL_8250
 
 config SERIAL_8250_DMA
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index bee908f99ea0..1615bfdde2a0 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -12,7 +12,7 @@ obj-$(CONFIG_SERIAL_8250)		+= 8250.o 8250_base.o
 8250_base-$(CONFIG_SERIAL_8250_DMA)	+= 8250_dma.o
 8250_base-$(CONFIG_SERIAL_8250_DWLIB)	+= 8250_dwlib.o
 8250_base-$(CONFIG_SERIAL_8250_FINTEK)	+= 8250_fintek.o
-obj-$(CONFIG_SERIAL_8250_GSC)		+= 8250_gsc.o
+obj-$(CONFIG_SERIAL_8250_PARISC)	+= 8250_parisc.o
 obj-$(CONFIG_SERIAL_8250_PCI)		+= 8250_pci.o
 obj-$(CONFIG_SERIAL_8250_EXAR)		+= 8250_exar.o
 obj-$(CONFIG_SERIAL_8250_HP300)		+= 8250_hp300.o
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 849ef313b824..bd685491eead 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -12,6 +12,7 @@
 #include <linux/dmaengine.h>
 #include <linux/dmapool.h>
 #include <linux/io.h>
+#include <linux/iopoll.h>
 #include <linux/irq.h>
 #include <linux/module.h>
 #include <linux/of.h>
@@ -404,33 +405,6 @@ static unsigned int lpuart_get_baud_clk_rate(struct lpuart_port *sport)
 #define lpuart_enable_clks(x)	__lpuart_enable_clks(x, true)
 #define lpuart_disable_clks(x)	__lpuart_enable_clks(x, false)
 
-static int lpuart_global_reset(struct lpuart_port *sport)
-{
-	struct uart_port *port = &sport->port;
-	void __iomem *global_addr;
-	int ret;
-
-	if (uart_console(port))
-		return 0;
-
-	ret = clk_prepare_enable(sport->ipg_clk);
-	if (ret) {
-		dev_err(sport->port.dev, "failed to enable uart ipg clk: %d\n", ret);
-		return ret;
-	}
-
-	if (is_imx7ulp_lpuart(sport) || is_imx8qxp_lpuart(sport)) {
-		global_addr = port->membase + UART_GLOBAL - IMX_REG_OFF;
-		writel(UART_GLOBAL_RST, global_addr);
-		usleep_range(GLOBAL_RST_MIN_US, GLOBAL_RST_MAX_US);
-		writel(0, global_addr);
-		usleep_range(GLOBAL_RST_MIN_US, GLOBAL_RST_MAX_US);
-	}
-
-	clk_disable_unprepare(sport->ipg_clk);
-	return 0;
-}
-
 static void lpuart_stop_tx(struct uart_port *port)
 {
 	unsigned char temp;
@@ -2613,6 +2587,54 @@ static const struct serial_rs485 lpuart_rs485_supported = {
 	/* delay_rts_* and RX_DURING_TX are not supported */
 };
 
+static int lpuart_global_reset(struct lpuart_port *sport)
+{
+	struct uart_port *port = &sport->port;
+	void __iomem *global_addr;
+	unsigned long ctrl, bd;
+	unsigned int val = 0;
+	int ret;
+
+	ret = clk_prepare_enable(sport->ipg_clk);
+	if (ret) {
+		dev_err(sport->port.dev, "failed to enable uart ipg clk: %d\n", ret);
+		return ret;
+	}
+
+	if (is_imx7ulp_lpuart(sport) || is_imx8qxp_lpuart(sport)) {
+		/*
+		 * If the transmitter is used by earlycon, wait for transmit engine to
+		 * complete and then reset.
+		 */
+		ctrl = lpuart32_read(port, UARTCTRL);
+		if (ctrl & UARTCTRL_TE) {
+			bd = lpuart32_read(&sport->port, UARTBAUD);
+			if (read_poll_timeout(lpuart32_tx_empty, val, val, 1, 100000, false,
+					      port)) {
+				dev_warn(sport->port.dev,
+					 "timeout waiting for transmit engine to complete\n");
+				clk_disable_unprepare(sport->ipg_clk);
+				return 0;
+			}
+		}
+
+		global_addr = port->membase + UART_GLOBAL - IMX_REG_OFF;
+		writel(UART_GLOBAL_RST, global_addr);
+		usleep_range(GLOBAL_RST_MIN_US, GLOBAL_RST_MAX_US);
+		writel(0, global_addr);
+		usleep_range(GLOBAL_RST_MIN_US, GLOBAL_RST_MAX_US);
+
+		/* Recover the transmitter for earlycon. */
+		if (ctrl & UARTCTRL_TE) {
+			lpuart32_write(port, bd, UARTBAUD);
+			lpuart32_write(port, ctrl, UARTCTRL);
+		}
+	}
+
+	clk_disable_unprepare(sport->ipg_clk);
+	return 0;
+}
+
 static int lpuart_probe(struct platform_device *pdev)
 {
 	const struct lpuart_soc_data *sdata = of_device_get_match_data(&pdev->dev);
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 11ac805663ae..757825edb0cd 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -2643,6 +2643,7 @@ static const struct dev_pm_ops imx_uart_pm_ops = {
 	.suspend_noirq = imx_uart_suspend_noirq,
 	.resume_noirq = imx_uart_resume_noirq,
 	.freeze_noirq = imx_uart_suspend_noirq,
+	.thaw_noirq = imx_uart_resume_noirq,
 	.restore_noirq = imx_uart_resume_noirq,
 	.suspend = imx_uart_suspend,
 	.resume = imx_uart_resume,