PCI: layerscape: Add suspend/resume for ls1043a

Add suspend/resume support for Layerscape LS1043a.

In the suspend path, PME_Turn_Off message is sent to the endpoint to
transition the link to L2/L3_Ready state. In this SoC, there is no way to
check if the controller has received the PME_To_Ack from the endpoint or
not. So to be on the safer side, the driver just waits for
PCIE_PME_TO_L2_TIMEOUT_US before asserting the SoC specific PMXMTTURNOFF
bit to complete the PME_Turn_Off handshake. Then the link would enter L2/L3
state depending on the VAUX supply.

In the resume path, the link is brought back from L2 to L0 by doing a
software reset.

Link: https://lore.kernel.org/r/20231204160829.2498703-5-Frank.Li@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Roy Zang <Roy.Zang@nxp.com>

1 files changed, 62 insertions, 1 deletions

diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
index f3dfb70066fb..7cdada200de7 100644
--- a/drivers/pci/controller/dwc/pci-layerscape.c
+++ b/drivers/pci/controller/dwc/pci-layerscape.c
@@ -41,6 +41,15 @@
 #define SCFG_PEXSFTRSTCR	0x190
 #define PEXSR(idx)		BIT(idx)
 
+/* LS1043A PEX PME control register */
+#define SCFG_PEXPMECR		0x144
+#define PEXPME(idx)		BIT(31 - (idx) * 4)
+
+/* LS1043A PEX LUT debug register */
+#define LS_PCIE_LDBG	0x7fc
+#define LDBG_SR		BIT(30)
+#define LDBG_WE		BIT(31)
+
 #define PCIE_IATU_NUM		6
 
 struct ls_pcie_drvdata {
@@ -224,6 +233,45 @@ static int ls1021a_pcie_exit_from_l2(struct dw_pcie_rp *pp)
 	return scfg_pcie_exit_from_l2(pcie->scfg, SCFG_PEXSFTRSTCR, PEXSR(pcie->index));
 }
 
+static void ls1043a_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	struct ls_pcie *pcie = to_ls_pcie(pci);
+
+	scfg_pcie_send_turnoff_msg(pcie->scfg, SCFG_PEXPMECR, PEXPME(pcie->index));
+}
+
+static int ls1043a_pcie_exit_from_l2(struct dw_pcie_rp *pp)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	struct ls_pcie *pcie = to_ls_pcie(pci);
+	u32 val;
+
+	/*
+	 * Reset the PEX wrapper to bring the link out of L2.
+	 * LDBG_WE: allows the user to have write access to the PEXDBG[SR] for both setting and
+	 *	    clearing the soft reset on the PEX module.
+	 * LDBG_SR: When SR is set to 1, the PEX module enters soft reset.
+	 */
+	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_LDBG);
+	val |= LDBG_WE;
+	ls_pcie_pf_lut_writel(pcie, LS_PCIE_LDBG, val);
+
+	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_LDBG);
+	val |= LDBG_SR;
+	ls_pcie_pf_lut_writel(pcie, LS_PCIE_LDBG, val);
+
+	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_LDBG);
+	val &= ~LDBG_SR;
+	ls_pcie_pf_lut_writel(pcie, LS_PCIE_LDBG, val);
+
+	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_LDBG);
+	val &= ~LDBG_WE;
+	ls_pcie_pf_lut_writel(pcie, LS_PCIE_LDBG, val);
+
+	return 0;
+}
+
 static const struct dw_pcie_host_ops ls_pcie_host_ops = {
 	.host_init = ls_pcie_host_init,
 	.pme_turn_off = ls_pcie_send_turnoff_msg,
@@ -241,6 +289,19 @@ static const struct ls_pcie_drvdata ls1021a_drvdata = {
 	.exit_from_l2 = ls1021a_pcie_exit_from_l2,
 };
 
+static const struct dw_pcie_host_ops ls1043a_pcie_host_ops = {
+	.host_init = ls_pcie_host_init,
+	.pme_turn_off = ls1043a_pcie_send_turnoff_msg,
+};
+
+static const struct ls_pcie_drvdata ls1043a_drvdata = {
+	.pf_lut_off = 0x10000,
+	.pm_support = true,
+	.scfg_support = true,
+	.ops = &ls1043a_pcie_host_ops,
+	.exit_from_l2 = ls1043a_pcie_exit_from_l2,
+};
+
 static const struct ls_pcie_drvdata layerscape_drvdata = {
 	.pf_lut_off = 0xc0000,
 	.pm_support = true,
@@ -252,7 +313,7 @@ static const struct of_device_id ls_pcie_of_match[] = {
 	{ .compatible = "fsl,ls1012a-pcie", .data = &layerscape_drvdata },
 	{ .compatible = "fsl,ls1021a-pcie", .data = &ls1021a_drvdata },
 	{ .compatible = "fsl,ls1028a-pcie", .data = &layerscape_drvdata },
-	{ .compatible = "fsl,ls1043a-pcie", .data = &ls1021a_drvdata },
+	{ .compatible = "fsl,ls1043a-pcie", .data = &ls1043a_drvdata },
 	{ .compatible = "fsl,ls1046a-pcie", .data = &layerscape_drvdata },
 	{ .compatible = "fsl,ls2080a-pcie", .data = &layerscape_drvdata },
 	{ .compatible = "fsl,ls2085a-pcie", .data = &layerscape_drvdata },