Merge tag 'drm-next-2019-09-18' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
 "This is the main pull request for 5.4-rc1 merge window. I don't think
  there is anything outstanding so next week should just be fixes, but
  we'll see if I missed anything. I landed some fixes earlier in the
  week but got delayed writing summary and sending it out, due to a mix
  of sick kid and jetlag!

  There are some fixes pending, but I'd rather get the main merge out of
  the way instead of delaying it longer.

  It's also pretty large in commit count and new amd header file size.
  The largest thing is four new amdgpu products (navi12/14, arcturus and
  renoir APU support).

  Otherwise it's pretty much lots of work across the board, i915 has
  started landing tigerlake support, lots of icelake fixes and lots of
  locking reworking for future gpu support, lots of header file rework
  (drmP.h is nearly gone), some old legacy hacks (DRM_WAIT_ON) have been
  put into the places they are needed.

  uapi:
   - content protection type property for HDCP

  core:
   - rework include dependencies
   - lots of drmP.h removals
   - link rate calculation robustness fix
   - make fb helper map only when required
   - add connector->DDC adapter link
   - DRM_WAIT_ON removed
   - drop DRM_AUTH usage from drivers

  dma-buf:
   - reservation object fence helper

  dma-fence:
   - shrink dma_fence struct
   - merge signal functions
   - store timestamps in dma_fence
   - selftests

  ttm:
   - embed drm_get_object struct into ttm_buffer_object
   - release_notify callback

  bridges:
   - sii902x - audio graph card support
   - tc358767 - aux data handling rework
   - ti-snd64dsi86 - debugfs support, DSI mode flags support

  panels:
   - Support for GiantPlus GPM940B0, Sharp LQ070Y3DG3B, Ortustech
     COM37H3M, Novatek NT39016, Sharp LS020B1DD01D, Raydium RM67191, Boe
     Himax8279d, Sharp LD-D5116Z01B
   - TI nspire, NEC NL8048HL11, LG Philips LB035Q02, Sharp LS037V7DW01,
     Sony ACX565AKM, Toppoly TD028TTEC1 Toppoly TD043MTEA1

  i915:
   - Initial tigerlake platform support
   - Locking simplification work, general all over refactoring.
   - Selftests
   - HDCP debug info improvements
   - DSI properties
   - Icelake display PLL fixes, colorspace fixes, bandwidth fixes, DSI
     suspend/resume
   - GuC fixes
   - Perf fixes
   - ElkhartLake enablement
   - DP MST fixes
   - GVT - command parser enhancements

  amdgpu:
   - add wipe memory on release flag for buffer creation
   - Navi12/14 support (may be marked experimental)
   - Arcturus support
   - Renoir APU support
   - mclk DPM for Navi
   - DC display fixes
   - Raven scatter/gather support
   - RAS support for GFX
   - Navi12 + Arcturus power features
   - GPU reset for Picasso
   - smu11 i2c controller support

  amdkfd:
   - navi12/14 support
   - Arcturus support

  radeon:
   - kexec fix

  nouveau:
   - improved display color management
   - detect lack of GPU power cables

  vmwgfx:
   - evicition priority support
   - remove unused security feature

  msm:
   - msm8998 display support
   - better async commit support for cursor updates

  etnaviv:
   - per-process address space support
   - performance counter fixes
   - softpin support

  mcde:
   - DCS transfers fix

  exynos:
   - drmP.h cleanup

  lima:
   - reduce logging

  kirin:
   - misc clenaups

  komeda:
   - dual-link support
   - DT memory regions

  hisilicon:
   - misc fixes

  imx:
   - IPUv3 image converter fixes
   - 32-bit RGB V4L2 pixel format support

  ingenic:
   - more support for panel related cases

  mgag200:
   - cursor support fix

  panfrost:
   - export GPU features register to userspace
   - gpu heap allocations
   - per-fd address space support

  pl111:
   - CLD pads wiring support removed from DT

  rockchip:
   - rework to use DRM PSR helpers
   - fix bug in VOP_WIN_GET macro
   - DSI DT binding rework

  sun4i:
   - improve support for color encoding and range
   - DDC enabled GPIO

  tinydrm:
   - rework SPI support
   - improve MIPI-DBI support
   - moved to drm/tiny

  vkms:
   - rework CRC tracking

  dw-hdmi:
   - get_eld and i2s improvements

  gm12u320:
   - misc fixes

  meson:
   - global code cleanup
   - vpu feature detect

  omap:
   - alpha/pixel blend mode properties

  rcar-du:
   - misc fixes"

* tag 'drm-next-2019-09-18' of git://anongit.freedesktop.org/drm/drm: (2112 commits)
  drm/nouveau/bar/gm20b: Avoid BAR1 teardown during init
  drm/nouveau: Fix ordering between TTM and GEM release
  drm/nouveau/prime: Extend DMA reservation object lock
  drm/nouveau: Fix fallout from reservation object rework
  drm/nouveau/kms/nv50-: Don't create MSTMs for eDP connectors
  drm/i915: Use NOEVICT for first pass on attemping to pin a GGTT mmap
  drm/i915: to make vgpu ppgtt notificaiton as atomic operation
  drm/i915: Flush the existing fence before GGTT read/write
  drm/i915: Hold irq-off for the entire fake lock period
  drm/i915/gvt: update RING_START reg of vGPU when the context is submitted to i915
  drm/i915/gvt: update vgpu workload head pointer correctly
  drm/mcde: Fix DSI transfers
  drm/msm: Use the correct dma_sync calls harder
  drm/msm: remove unlikely() from WARN_ON() conditions
  drm/msm/dsi: Fix return value check for clk_get_parent
  drm/msm: add atomic traces
  drm/msm/dpu: async commit support
  drm/msm: async commit support
  drm/msm: split power control from prepare/complete_commit
  drm/msm: add kms->flush_commit()
  ...

1 files changed, 424 insertions, 0 deletions

diff --git a/drivers/gpu/drm/tiny/st7586.c b/drivers/gpu/drm/tiny/st7586.c
new file mode 100644
index 000000000000..3cc21a1b30c8
--- /dev/null
+++ b/drivers/gpu/drm/tiny/st7586.c
@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * DRM driver for Sitronix ST7586 panels
+ *
+ * Copyright 2017 David Lechner <david@lechnology.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/dma-buf.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/spi/spi.h>
+#include <video/mipi_display.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_damage_helper.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_fb_cma_helper.h>
+#include <drm/drm_fb_helper.h>
+#include <drm/drm_format_helper.h>
+#include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_gem_framebuffer_helper.h>
+#include <drm/drm_mipi_dbi.h>
+#include <drm/drm_rect.h>
+#include <drm/drm_vblank.h>
+
+/* controller-specific commands */
+#define ST7586_DISP_MODE_GRAY	0x38
+#define ST7586_DISP_MODE_MONO	0x39
+#define ST7586_ENABLE_DDRAM	0x3a
+#define ST7586_SET_DISP_DUTY	0xb0
+#define ST7586_SET_PART_DISP	0xb4
+#define ST7586_SET_NLINE_INV	0xb5
+#define ST7586_SET_VOP		0xc0
+#define ST7586_SET_BIAS_SYSTEM	0xc3
+#define ST7586_SET_BOOST_LEVEL	0xc4
+#define ST7586_SET_VOP_OFFSET	0xc7
+#define ST7586_ENABLE_ANALOG	0xd0
+#define ST7586_AUTO_READ_CTRL	0xd7
+#define ST7586_OTP_RW_CTRL	0xe0
+#define ST7586_OTP_CTRL_OUT	0xe1
+#define ST7586_OTP_READ		0xe3
+
+#define ST7586_DISP_CTRL_MX	BIT(6)
+#define ST7586_DISP_CTRL_MY	BIT(7)
+
+/*
+ * The ST7586 controller has an unusual pixel format where 2bpp grayscale is
+ * packed 3 pixels per byte with the first two pixels using 3 bits and the 3rd
+ * pixel using only 2 bits.
+ *
+ * |  D7  |  D6  |  D5  ||      |      || 2bpp |
+ * | (D4) | (D3) | (D2) ||  D1  |  D0  || GRAY |
+ * +------+------+------++------+------++------+
+ * |  1   |  1   |  1   ||  1   |  1   || 0  0 | black
+ * |  1   |  0   |  0   ||  1   |  0   || 0  1 | dark gray
+ * |  0   |  1   |  0   ||  0   |  1   || 1  0 | light gray
+ * |  0   |  0   |  0   ||  0   |  0   || 1  1 | white
+ */
+
+static const u8 st7586_lookup[] = { 0x7, 0x4, 0x2, 0x0 };
+
+static void st7586_xrgb8888_to_gray332(u8 *dst, void *vaddr,
+				       struct drm_framebuffer *fb,
+				       struct drm_rect *clip)
+{
+	size_t len = (clip->x2 - clip->x1) * (clip->y2 - clip->y1);
+	unsigned int x, y;
+	u8 *src, *buf, val;
+
+	buf = kmalloc(len, GFP_KERNEL);
+	if (!buf)
+		return;
+
+	drm_fb_xrgb8888_to_gray8(buf, vaddr, fb, clip);
+	src = buf;
+
+	for (y = clip->y1; y < clip->y2; y++) {
+		for (x = clip->x1; x < clip->x2; x += 3) {
+			val = st7586_lookup[*src++ >> 6] << 5;
+			val |= st7586_lookup[*src++ >> 6] << 2;
+			val |= st7586_lookup[*src++ >> 6] >> 1;
+			*dst++ = val;
+		}
+	}
+
+	kfree(buf);
+}
+
+static int st7586_buf_copy(void *dst, struct drm_framebuffer *fb,
+			   struct drm_rect *clip)
+{
+	struct drm_gem_cma_object *cma_obj = drm_fb_cma_get_gem_obj(fb, 0);
+	struct dma_buf_attachment *import_attach = cma_obj->base.import_attach;
+	void *src = cma_obj->vaddr;
+	int ret = 0;
+
+	if (import_attach) {
+		ret = dma_buf_begin_cpu_access(import_attach->dmabuf,
+					       DMA_FROM_DEVICE);
+		if (ret)
+			return ret;
+	}
+
+	st7586_xrgb8888_to_gray332(dst, src, fb, clip);
+
+	if (import_attach)
+		ret = dma_buf_end_cpu_access(import_attach->dmabuf,
+					     DMA_FROM_DEVICE);
+
+	return ret;
+}
+
+static void st7586_fb_dirty(struct drm_framebuffer *fb, struct drm_rect *rect)
+{
+	struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(fb->dev);
+	struct mipi_dbi *dbi = &dbidev->dbi;
+	int start, end, idx, ret = 0;
+
+	if (!dbidev->enabled)
+		return;
+
+	if (!drm_dev_enter(fb->dev, &idx))
+		return;
+
+	/* 3 pixels per byte, so grow clip to nearest multiple of 3 */
+	rect->x1 = rounddown(rect->x1, 3);
+	rect->x2 = roundup(rect->x2, 3);
+
+	DRM_DEBUG_KMS("Flushing [FB:%d] " DRM_RECT_FMT "\n", fb->base.id, DRM_RECT_ARG(rect));
+
+	ret = st7586_buf_copy(dbidev->tx_buf, fb, rect);
+	if (ret)
+		goto err_msg;
+
+	/* Pixels are packed 3 per byte */
+	start = rect->x1 / 3;
+	end = rect->x2 / 3;
+
+	mipi_dbi_command(dbi, MIPI_DCS_SET_COLUMN_ADDRESS,
+			 (start >> 8) & 0xFF, start & 0xFF,
+			 (end >> 8) & 0xFF, (end - 1) & 0xFF);
+	mipi_dbi_command(dbi, MIPI_DCS_SET_PAGE_ADDRESS,
+			 (rect->y1 >> 8) & 0xFF, rect->y1 & 0xFF,
+			 (rect->y2 >> 8) & 0xFF, (rect->y2 - 1) & 0xFF);
+
+	ret = mipi_dbi_command_buf(dbi, MIPI_DCS_WRITE_MEMORY_START,
+				   (u8 *)dbidev->tx_buf,
+				   (end - start) * (rect->y2 - rect->y1));
+err_msg:
+	if (ret)
+		dev_err_once(fb->dev->dev, "Failed to update display %d\n", ret);
+
+	drm_dev_exit(idx);
+}
+
+static void st7586_pipe_update(struct drm_simple_display_pipe *pipe,
+			       struct drm_plane_state *old_state)
+{
+	struct drm_plane_state *state = pipe->plane.state;
+	struct drm_crtc *crtc = &pipe->crtc;
+	struct drm_rect rect;
+
+	if (drm_atomic_helper_damage_merged(old_state, state, &rect))
+		st7586_fb_dirty(state->fb, &rect);
+
+	if (crtc->state->event) {
+		spin_lock_irq(&crtc->dev->event_lock);
+		drm_crtc_send_vblank_event(crtc, crtc->state->event);
+		spin_unlock_irq(&crtc->dev->event_lock);
+		crtc->state->event = NULL;
+	}
+}
+
+static void st7586_pipe_enable(struct drm_simple_display_pipe *pipe,
+			       struct drm_crtc_state *crtc_state,
+			       struct drm_plane_state *plane_state)
+{
+	struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(pipe->crtc.dev);
+	struct drm_framebuffer *fb = plane_state->fb;
+	struct mipi_dbi *dbi = &dbidev->dbi;
+	struct drm_rect rect = {
+		.x1 = 0,
+		.x2 = fb->width,
+		.y1 = 0,
+		.y2 = fb->height,
+	};
+	int idx, ret;
+	u8 addr_mode;
+
+	if (!drm_dev_enter(pipe->crtc.dev, &idx))
+		return;
+
+	DRM_DEBUG_KMS("\n");
+
+	ret = mipi_dbi_poweron_reset(dbidev);
+	if (ret)
+		goto out_exit;
+
+	mipi_dbi_command(dbi, ST7586_AUTO_READ_CTRL, 0x9f);
+	mipi_dbi_command(dbi, ST7586_OTP_RW_CTRL, 0x00);
+
+	msleep(10);
+
+	mipi_dbi_command(dbi, ST7586_OTP_READ);
+
+	msleep(20);
+
+	mipi_dbi_command(dbi, ST7586_OTP_CTRL_OUT);
+	mipi_dbi_command(dbi, MIPI_DCS_EXIT_SLEEP_MODE);
+	mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_OFF);
+
+	msleep(50);
+
+	mipi_dbi_command(dbi, ST7586_SET_VOP_OFFSET, 0x00);
+	mipi_dbi_command(dbi, ST7586_SET_VOP, 0xe3, 0x00);
+	mipi_dbi_command(dbi, ST7586_SET_BIAS_SYSTEM, 0x02);
+	mipi_dbi_command(dbi, ST7586_SET_BOOST_LEVEL, 0x04);
+	mipi_dbi_command(dbi, ST7586_ENABLE_ANALOG, 0x1d);
+	mipi_dbi_command(dbi, ST7586_SET_NLINE_INV, 0x00);
+	mipi_dbi_command(dbi, ST7586_DISP_MODE_GRAY);
+	mipi_dbi_command(dbi, ST7586_ENABLE_DDRAM, 0x02);
+
+	switch (dbidev->rotation) {
+	default:
+		addr_mode = 0x00;
+		break;
+	case 90:
+		addr_mode = ST7586_DISP_CTRL_MY;
+		break;
+	case 180:
+		addr_mode = ST7586_DISP_CTRL_MX | ST7586_DISP_CTRL_MY;
+		break;
+	case 270:
+		addr_mode = ST7586_DISP_CTRL_MX;
+		break;
+	}
+	mipi_dbi_command(dbi, MIPI_DCS_SET_ADDRESS_MODE, addr_mode);
+
+	mipi_dbi_command(dbi, ST7586_SET_DISP_DUTY, 0x7f);
+	mipi_dbi_command(dbi, ST7586_SET_PART_DISP, 0xa0);
+	mipi_dbi_command(dbi, MIPI_DCS_SET_PARTIAL_AREA, 0x00, 0x00, 0x00, 0x77);
+	mipi_dbi_command(dbi, MIPI_DCS_EXIT_INVERT_MODE);
+
+	msleep(100);
+
+	dbidev->enabled = true;
+	st7586_fb_dirty(fb, &rect);
+
+	mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_ON);
+out_exit:
+	drm_dev_exit(idx);
+}
+
+static void st7586_pipe_disable(struct drm_simple_display_pipe *pipe)
+{
+	struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(pipe->crtc.dev);
+
+	/*
+	 * This callback is not protected by drm_dev_enter/exit since we want to
+	 * turn off the display on regular driver unload. It's highly unlikely
+	 * that the underlying SPI controller is gone should this be called after
+	 * unplug.
+	 */
+
+	DRM_DEBUG_KMS("\n");
+
+	if (!dbidev->enabled)
+		return;
+
+	mipi_dbi_command(&dbidev->dbi, MIPI_DCS_SET_DISPLAY_OFF);
+	dbidev->enabled = false;
+}
+
+static const u32 st7586_formats[] = {
+	DRM_FORMAT_XRGB8888,
+};
+
+static const struct drm_simple_display_pipe_funcs st7586_pipe_funcs = {
+	.enable		= st7586_pipe_enable,
+	.disable	= st7586_pipe_disable,
+	.update		= st7586_pipe_update,
+	.prepare_fb	= drm_gem_fb_simple_display_pipe_prepare_fb,
+};
+
+static const struct drm_display_mode st7586_mode = {
+	DRM_SIMPLE_MODE(178, 128, 37, 27),
+};
+
+DEFINE_DRM_GEM_CMA_FOPS(st7586_fops);
+
+static struct drm_driver st7586_driver = {
+	.driver_features	= DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC,
+	.fops			= &st7586_fops,
+	.release		= mipi_dbi_release,
+	DRM_GEM_CMA_VMAP_DRIVER_OPS,
+	.debugfs_init		= mipi_dbi_debugfs_init,
+	.name			= "st7586",
+	.desc			= "Sitronix ST7586",
+	.date			= "20170801",
+	.major			= 1,
+	.minor			= 0,
+};
+
+static const struct of_device_id st7586_of_match[] = {
+	{ .compatible = "lego,ev3-lcd" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, st7586_of_match);
+
+static const struct spi_device_id st7586_id[] = {
+	{ "ev3-lcd", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(spi, st7586_id);
+
+static int st7586_probe(struct spi_device *spi)
+{
+	struct device *dev = &spi->dev;
+	struct mipi_dbi_dev *dbidev;
+	struct drm_device *drm;
+	struct mipi_dbi *dbi;
+	struct gpio_desc *a0;
+	u32 rotation = 0;
+	size_t bufsize;
+	int ret;
+
+	dbidev = kzalloc(sizeof(*dbidev), GFP_KERNEL);
+	if (!dbidev)
+		return -ENOMEM;
+
+	dbi = &dbidev->dbi;
+	drm = &dbidev->drm;
+	ret = devm_drm_dev_init(dev, drm, &st7586_driver);
+	if (ret) {
+		kfree(dbidev);
+		return ret;
+	}
+
+	drm_mode_config_init(drm);
+
+	bufsize = (st7586_mode.vdisplay + 2) / 3 * st7586_mode.hdisplay;
+
+	dbi->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(dbi->reset)) {
+		DRM_DEV_ERROR(dev, "Failed to get gpio 'reset'\n");
+		return PTR_ERR(dbi->reset);
+	}
+
+	a0 = devm_gpiod_get(dev, "a0", GPIOD_OUT_LOW);
+	if (IS_ERR(a0)) {
+		DRM_DEV_ERROR(dev, "Failed to get gpio 'a0'\n");
+		return PTR_ERR(a0);
+	}
+
+	device_property_read_u32(dev, "rotation", &rotation);
+
+	ret = mipi_dbi_spi_init(spi, dbi, a0);
+	if (ret)
+		return ret;
+
+	/* Cannot read from this controller via SPI */
+	dbi->read_commands = NULL;
+
+	ret = mipi_dbi_dev_init_with_formats(dbidev, &st7586_pipe_funcs,
+					     st7586_formats, ARRAY_SIZE(st7586_formats),
+					     &st7586_mode, rotation, bufsize);
+	if (ret)
+		return ret;
+
+	/*
+	 * we are using 8-bit data, so we are not actually swapping anything,
+	 * but setting mipi->swap_bytes makes mipi_dbi_typec3_command() do the
+	 * right thing and not use 16-bit transfers (which results in swapped
+	 * bytes on little-endian systems and causes out of order data to be
+	 * sent to the display).
+	 */
+	dbi->swap_bytes = true;
+
+	drm_mode_config_reset(drm);
+
+	ret = drm_dev_register(drm, 0);
+	if (ret)
+		return ret;
+
+	spi_set_drvdata(spi, drm);
+
+	drm_fbdev_generic_setup(drm, 0);
+
+	return 0;
+}
+
+static int st7586_remove(struct spi_device *spi)
+{
+	struct drm_device *drm = spi_get_drvdata(spi);
+
+	drm_dev_unplug(drm);
+	drm_atomic_helper_shutdown(drm);
+
+	return 0;
+}
+
+static void st7586_shutdown(struct spi_device *spi)
+{
+	drm_atomic_helper_shutdown(spi_get_drvdata(spi));
+}
+
+static struct spi_driver st7586_spi_driver = {
+	.driver = {
+		.name = "st7586",
+		.owner = THIS_MODULE,
+		.of_match_table = st7586_of_match,
+	},
+	.id_table = st7586_id,
+	.probe = st7586_probe,
+	.remove = st7586_remove,
+	.shutdown = st7586_shutdown,
+};
+module_spi_driver(st7586_spi_driver);
+
+MODULE_DESCRIPTION("Sitronix ST7586 DRM driver");
+MODULE_AUTHOR("David Lechner <david@lechnology.com>");
+MODULE_LICENSE("GPL");