diff options
| author | Radhakrishna Sripada <radhakrishna.sripada@intel.com> | 2023-04-13 14:24:37 -0700 |
|---|---|---|
| committer | Radhakrishna Sripada <radhakrishna.sripada@intel.com> | 2023-04-14 08:12:40 -0700 |
| commit | 51390cc0e00a378b7c152bb6f63efc0a01b59d20 (patch) | |
| tree | 25fe924dbf6f54ad1ef2985a7fd3aea4974df004 /drivers/gpu/drm/i915/display/intel_cx0_phy.c | |
| parent | a42e65f33c38e3b0191cf6a1bc8ebb6c8289127d (diff) | |
| download | linux-51390cc0e00a378b7c152bb6f63efc0a01b59d20.tar.gz linux-51390cc0e00a378b7c152bb6f63efc0a01b59d20.tar.bz2 linux-51390cc0e00a378b7c152bb6f63efc0a01b59d20.zip | |
drm/i915/mtl: Add Support for C10 PHY message bus and pll programming
XELPDP has C10 and C20 phys from Synopsys to drive displays. Each phy
has a dedicated PIPE 5.2 Message bus for configuration. This message
bus is used to configure the phy internal registers.
XELPDP has C10 phys to drive output to the EDP and the native output
from the display engine. Add structures, programming hardware state
readout logic. Port clock calculations are similar to DG2. Use the DG2
formulae to calculate the port clock but use the relevant pll signals.
Note: PHY lane 0 is always used for PLL programming.
Add sequences for C10 phy enable/disable phy lane reset,
powerdown change sequence and phy lane programming.
Bspec: 64539, 64568, 64599, 65100, 65101, 65450, 65451, 67610, 67636
v2: Squash patches related to C10 phy message bus and pll
programming support (Jani)
Move register definitions to a new file i.e. intel_cx0_reg_defs.h (Jani)
Move macro definitions (Jani)
DP rates as separate patch (Jani)
Spin out xelpdp register definitions into a separate file (Jani)
Replace macro to select registers based on phy lane with
function calls (Jani)
Fix styling issues (Jani)
Call XELPDP_PORT_P2M_MSGBUS_STATUS() with port instead of phy (Lucas)
v3: Move clear request flag into try-loop
v4: On PHY idle change drm_err_once() as drm_dbg_kms() (Jani)
use __intel_de_wait_for_register() instead of __intel_wait_for_register
and uncomment intel_uncore.h (Jani)
Add DP-alt support for PHY lane programming (Khaled)
v4: Add tx and cmn on c10mpllb_state (Imre)
Add missing waits for pending transactions between two message bus
writes (Imre)
General cleanups and simplifications (Imre)
v5: Few nit cleanups from rev4 (imre)
s/dev_priv/i915/ , s/c10mpllb/c10pll/ (RK)
Rebase
v6: Move the mtl code from intel_c10pll_calc_port_clock to mtl function
Fix typo in comment for REG_FIELD_PREP8 definition(Imre)
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com> (v4)
Link: https://patchwork.freedesktop.org/patch/msgid/20230413212443.1504245-4-radhakrishna.sripada@intel.com
Diffstat (limited to 'drivers/gpu/drm/i915/display/intel_cx0_phy.c')
| -rw-r--r-- | drivers/gpu/drm/i915/display/intel_cx0_phy.c | 1207 |
1 files changed, 1207 insertions, 0 deletions
diff --git a/drivers/gpu/drm/i915/display/intel_cx0_phy.c b/drivers/gpu/drm/i915/display/intel_cx0_phy.c new file mode 100644 index 000000000000..9ab1e686a40b --- /dev/null +++ b/drivers/gpu/drm/i915/display/intel_cx0_phy.c @@ -0,0 +1,1207 @@ +// SPDX-License-Identifier: MIT +/* + * Copyright © 2023 Intel Corporation + */ + +#include "i915_reg.h" +#include "intel_cx0_phy.h" +#include "intel_cx0_phy_regs.h" +#include "intel_de.h" +#include "intel_display_types.h" +#include "intel_dp.h" +#include "intel_panel.h" +#include "intel_psr.h" +#include "intel_tc.h" + +#define MB_WRITE_COMMITTED true +#define MB_WRITE_UNCOMMITTED false + +#define for_each_cx0_lane_in_mask(__lane_mask, __lane) \ + for ((__lane) = 0; (__lane) < 2; (__lane)++) \ + for_each_if((__lane_mask) & BIT(__lane)) + +#define INTEL_CX0_LANE0 BIT(0) +#define INTEL_CX0_LANE1 BIT(1) +#define INTEL_CX0_BOTH_LANES (INTEL_CX0_LANE1 | INTEL_CX0_LANE0) + +bool intel_is_c10phy(struct drm_i915_private *i915, enum phy phy) +{ + if (IS_METEORLAKE(i915) && (phy < PHY_C)) + return true; + + return false; +} + +static int lane_mask_to_lane(u8 lane_mask) +{ + if (WARN_ON((lane_mask & ~INTEL_CX0_BOTH_LANES) || + hweight8(lane_mask) != 1)) + return 0; + + return ilog2(lane_mask); +} + +static void +assert_dc_off(struct drm_i915_private *i915) +{ + bool enabled; + + enabled = intel_display_power_is_enabled(i915, POWER_DOMAIN_DC_OFF); + drm_WARN_ON(&i915->drm, !enabled); +} + +/* + * Prepare HW for CX0 phy transactions. + * + * It is required that PSR and DC5/6 are disabled before any CX0 message + * bus transaction is executed. + */ +static intel_wakeref_t intel_cx0_phy_transaction_begin(struct intel_encoder *encoder) +{ + struct drm_i915_private *i915 = to_i915(encoder->base.dev); + struct intel_dp *intel_dp = enc_to_intel_dp(encoder); + + intel_psr_pause(intel_dp); + return intel_display_power_get(i915, POWER_DOMAIN_DC_OFF); +} + +static void intel_cx0_phy_transaction_end(struct intel_encoder *encoder, intel_wakeref_t wakeref) +{ + struct drm_i915_private *i915 = to_i915(encoder->base.dev); + struct intel_dp *intel_dp = enc_to_intel_dp(encoder); + + intel_psr_resume(intel_dp); + intel_display_power_put(i915, POWER_DOMAIN_DC_OFF, wakeref); +} + +static void intel_clear_response_ready_flag(struct drm_i915_private *i915, + enum port port, int lane) +{ + intel_de_rmw(i915, XELPDP_PORT_P2M_MSGBUS_STATUS(port, lane), + 0, XELPDP_PORT_P2M_RESPONSE_READY | XELPDP_PORT_P2M_ERROR_SET); +} + +static void intel_cx0_bus_reset(struct drm_i915_private *i915, enum port port, int lane) +{ + enum phy phy = intel_port_to_phy(i915, port); + + intel_de_write(i915, XELPDP_PORT_M2P_MSGBUS_CTL(port, lane), + XELPDP_PORT_M2P_TRANSACTION_RESET); + + if (intel_de_wait_for_clear(i915, XELPDP_PORT_M2P_MSGBUS_CTL(port, lane), + XELPDP_PORT_M2P_TRANSACTION_RESET, + XELPDP_MSGBUS_TIMEOUT_SLOW)) { + drm_err_once(&i915->drm, "Failed to bring PHY %c to idle.\n", phy_name(phy)); + return; + } + + intel_clear_response_ready_flag(i915, port, lane); +} + +static int intel_cx0_wait_for_ack(struct drm_i915_private *i915, enum port port, + int command, int lane, u32 *val) +{ + enum phy phy = intel_port_to_phy(i915, port); + + if (__intel_de_wait_for_register(i915, + XELPDP_PORT_P2M_MSGBUS_STATUS(port, lane), + XELPDP_PORT_P2M_RESPONSE_READY, + XELPDP_PORT_P2M_RESPONSE_READY, + XELPDP_MSGBUS_TIMEOUT_FAST_US, + XELPDP_MSGBUS_TIMEOUT_SLOW, val)) { + drm_dbg_kms(&i915->drm, "PHY %c Timeout waiting for message ACK. Status: 0x%x\n", + phy_name(phy), *val); + return -ETIMEDOUT; + } + + if (*val & XELPDP_PORT_P2M_ERROR_SET) { + drm_dbg_kms(&i915->drm, "PHY %c Error occurred during %s command. Status: 0x%x\n", phy_name(phy), + command == XELPDP_PORT_P2M_COMMAND_READ_ACK ? "read" : "write", *val); + intel_cx0_bus_reset(i915, port, lane); + return -EINVAL; + } + + if (REG_FIELD_GET(XELPDP_PORT_P2M_COMMAND_TYPE_MASK, *val) != command) { + drm_dbg_kms(&i915->drm, "PHY %c Not a %s response. MSGBUS Status: 0x%x.\n", phy_name(phy), + command == XELPDP_PORT_P2M_COMMAND_READ_ACK ? "read" : "write", *val); + intel_cx0_bus_reset(i915, port, lane); + return -EINVAL; + } + + return 0; +} + +static int __intel_cx0_read_once(struct drm_i915_private *i915, enum port port, + int lane, u16 addr) +{ + enum phy phy = intel_port_to_phy(i915, port); + int ack; + u32 val; + + if (intel_de_wait_for_clear(i915, XELPDP_PORT_M2P_MSGBUS_CTL(port, lane), + XELPDP_PORT_M2P_TRANSACTION_PENDING, + XELPDP_MSGBUS_TIMEOUT_SLOW)) { + drm_dbg_kms(&i915->drm, + "PHY %c Timeout waiting for previous transaction to complete. Reset the bus and retry.\n", phy_name(phy)); + intel_cx0_bus_reset(i915, port, lane); + return -ETIMEDOUT; + } + + intel_de_write(i915, XELPDP_PORT_M2P_MSGBUS_CTL(port, lane), + XELPDP_PORT_M2P_TRANSACTION_PENDING | + XELPDP_PORT_M2P_COMMAND_READ | + XELPDP_PORT_M2P_ADDRESS(addr)); + + ack = intel_cx0_wait_for_ack(i915, port, XELPDP_PORT_P2M_COMMAND_READ_ACK, lane, &val); + if (ack < 0) { + intel_cx0_bus_reset(i915, port, lane); + return ack; + } + + intel_clear_response_ready_flag(i915, port, lane); + + return REG_FIELD_GET(XELPDP_PORT_P2M_DATA_MASK, val); +} + +static u8 __intel_cx0_read(struct drm_i915_private *i915, enum port port, + int lane, u16 addr) +{ + enum phy phy = intel_port_to_phy(i915, port); + int i, status; + + assert_dc_off(i915); + + /* 3 tries is assumed to be enough to read successfully */ + for (i = 0; i < 3; i++) { + status = __intel_cx0_read_once(i915, port, lane, addr); + + if (status >= 0) + return status; + } + + drm_err_once(&i915->drm, "PHY %c Read %04x failed after %d retries.\n", + phy_name(phy), addr, i); + + return 0; +} + +static u8 intel_cx0_read(struct drm_i915_private *i915, enum port port, + u8 lane_mask, u16 addr) +{ + int lane = lane_mask_to_lane(lane_mask); + + return __intel_cx0_read(i915, port, lane, addr); +} + +static int __intel_cx0_write_once(struct drm_i915_private *i915, enum port port, + int lane, u16 addr, u8 data, bool committed) +{ + enum phy phy = intel_port_to_phy(i915, port); + u32 val; + + if (intel_de_wait_for_clear(i915, XELPDP_PORT_M2P_MSGBUS_CTL(port, lane), + XELPDP_PORT_M2P_TRANSACTION_PENDING, + XELPDP_MSGBUS_TIMEOUT_SLOW)) { + drm_dbg_kms(&i915->drm, + "PHY %c Timeout waiting for previous transaction to complete. Resetting the bus.\n", phy_name(phy)); + intel_cx0_bus_reset(i915, port, lane); + return -ETIMEDOUT; + } + + intel_de_write(i915, XELPDP_PORT_M2P_MSGBUS_CTL(port, lane), + XELPDP_PORT_M2P_TRANSACTION_PENDING | + (committed ? XELPDP_PORT_M2P_COMMAND_WRITE_COMMITTED : + XELPDP_PORT_M2P_COMMAND_WRITE_UNCOMMITTED) | + XELPDP_PORT_M2P_DATA(data) | + XELPDP_PORT_M2P_ADDRESS(addr)); + + if (intel_de_wait_for_clear(i915, XELPDP_PORT_M2P_MSGBUS_CTL(port, lane), + XELPDP_PORT_M2P_TRANSACTION_PENDING, + XELPDP_MSGBUS_TIMEOUT_SLOW)) { + drm_dbg_kms(&i915->drm, + "PHY %c Timeout waiting for write to complete. Resetting the bus.\n", phy_name(phy)); + intel_cx0_bus_reset(i915, port, lane); + return -ETIMEDOUT; + } + + if (committed) { + if (intel_cx0_wait_for_ack(i915, port, XELPDP_PORT_P2M_COMMAND_WRITE_ACK, lane, &val) < 0) { + intel_cx0_bus_reset(i915, port, lane); + return -EINVAL; + } + } else if ((intel_de_read(i915, XELPDP_PORT_P2M_MSGBUS_STATUS(port, lane)) & + XELPDP_PORT_P2M_ERROR_SET)) { + drm_dbg_kms(&i915->drm, + "PHY %c Error occurred during write command.\n", phy_name(phy)); + intel_cx0_bus_reset(i915, port, lane); + return -EINVAL; + } + + intel_clear_response_ready_flag(i915, port, lane); + + return 0; +} + +static void __intel_cx0_write(struct drm_i915_private *i915, enum port port, + int lane, u16 addr, u8 data, bool committed) +{ + enum phy phy = intel_port_to_phy(i915, port); + int i, status; + + assert_dc_off(i915); + + /* 3 tries is assumed to be enough to write successfully */ + for (i = 0; i < 3; i++) { + status = __intel_cx0_write_once(i915, port, lane, addr, data, committed); + + if (status == 0) + return; + } + + drm_err_once(&i915->drm, + "PHY %c Write %04x failed after %d retries.\n", phy_name(phy), addr, i); +} + +static void intel_cx0_write(struct drm_i915_private *i915, enum port port, + u8 lane_mask, u16 addr, u8 data, bool committed) +{ + int lane; + + for_each_cx0_lane_in_mask(lane_mask, lane) + __intel_cx0_write(i915, port, lane, addr, data, committed); +} + +static void __intel_cx0_rmw(struct drm_i915_private *i915, enum port port, + int lane, u16 addr, u8 clear, u8 set, bool committed) +{ + u8 old, val; + + old = __intel_cx0_read(i915, port, lane, addr); + val = (old & ~clear) | set; + + if (val != old) + __intel_cx0_write(i915, port, lane, addr, val, committed); +} + +static void intel_cx0_rmw(struct drm_i915_private *i915, enum port port, + u8 lane_mask, u16 addr, u8 clear, u8 set, bool committed) +{ + u8 lane; + + for_each_cx0_lane_in_mask(lane_mask, lane) + __intel_cx0_rmw(i915, port, lane, addr, clear, set, committed); +} + +/* + * Basic DP link rates with 38.4 MHz reference clock. + * Note: The tables below are with SSC. In non-ssc + * registers 0xC04 to 0xC08(pll[4] to pll[8]) will be + * programmed 0. + */ + +static const struct intel_c10pll_state mtl_c10_dp_rbr = { + .clock = 162000, + .tx = 0x10, + .cmn = 0x21, + .pll[0] = 0xB4, + .pll[1] = 0, + .pll[2] = 0x30, + .pll[3] = 0x1, + .pll[4] = 0x26, + .pll[5] = 0x0C, + .pll[6] = 0x98, + .pll[7] = 0x46, + .pll[8] = 0x1, + .pll[9] = 0x1, + .pll[10] = 0, + .pll[11] = 0, + .pll[12] = 0xC0, + .pll[13] = 0, + .pll[14] = 0, + .pll[15] = 0x2, + .pll[16] = 0x84, + .pll[17] = 0x4F, + .pll[18] = 0xE5, + .pll[19] = 0x23, +}; + +static const struct intel_c10pll_state mtl_c10_edp_r216 = { + .clock = 216000, + .tx = 0x10, + .cmn = 0x21, + .pll[0] = 0x4, + .pll[1] = 0, + .pll[2] = 0xA2, + .pll[3] = 0x1, + .pll[4] = 0x33, + .pll[5] = 0x10, + .pll[6] = 0x75, + .pll[7] = 0xB3, + .pll[8] = 0x1, + .pll[9] = 0x1, + .pll[10] = 0, + .pll[11] = 0, + .pll[12] = 0, + .pll[13] = 0, + .pll[14] = 0, + .pll[15] = 0x2, + .pll[16] = 0x85, + .pll[17] = 0x0F, + .pll[18] = 0xE6, + .pll[19] = 0x23, +}; + +static const struct intel_c10pll_state mtl_c10_edp_r243 = { + .clock = 243000, + .tx = 0x10, + .cmn = 0x21, + .pll[0] = 0x34, + .pll[1] = 0, + .pll[2] = 0xDA, + .pll[3] = 0x1, + .pll[4] = 0x39, + .pll[5] = 0x12, + .pll[6] = 0xE3, + .pll[7] = 0xE9, + .pll[8] = 0x1, + .pll[9] = 0x1, + .pll[10] = 0, + .pll[11] = 0, + .pll[12] = 0x20, + .pll[13] = 0, + .pll[14] = 0, + .pll[15] = 0x2, + .pll[16] = 0x85, + .pll[17] = 0x8F, + .pll[18] = 0xE6, + .pll[19] = 0x23, +}; + +static const struct intel_c10pll_state mtl_c10_dp_hbr1 = { + .clock = 270000, + .tx = 0x10, + .cmn = 0x21, + .pll[0] = 0xF4, + .pll[1] = 0, + .pll[2] = 0xF8, + .pll[3] = 0x0, + .pll[4] = 0x20, + .pll[5] = 0x0A, + .pll[6] = 0x29, + .pll[7] = 0x10, + .pll[8] = 0x1, /* Verify */ + .pll[9] = 0x1, + .pll[10] = 0, + .pll[11] = 0, + .pll[12] = 0xA0, + .pll[13] = 0, + .pll[14] = 0, + .pll[15] = 0x1, + .pll[16] = 0x84, + .pll[17] = 0x4F, + .pll[18] = 0xE5, + .pll[19] = 0x23, +}; + +static const struct intel_c10pll_state mtl_c10_edp_r324 = { + .clock = 324000, + .tx = 0x10, + .cmn = 0x21, + .pll[0] = 0xB4, + .pll[1] = 0, + .pll[2] = 0x30, + .pll[3] = 0x1, + .pll[4] = 0x26, + .pll[5] = 0x0C, + .pll[6] = 0x98, + .pll[7] = 0x46, + .pll[8] = 0x1, + .pll[9] = 0x1, + .pll[10] = 0, + .pll[11] = 0, + .pll[12] = 0xC0, + .pll[13] = 0, + .pll[14] = 0, + .pll[15] = 0x1, + .pll[16] = 0x85, + .pll[17] = 0x4F, + .pll[18] = 0xE6, + .pll[19] = 0x23, +}; + +static const struct intel_c10pll_state mtl_c10_edp_r432 = { + .clock = 432000, + .tx = 0x10, + .cmn = 0x21, + .pll[0] = 0x4, + .pll[1] = 0, + .pll[2] = 0xA2, + .pll[3] = 0x1, + .pll[4] = 0x33, + .pll[5] = 0x10, + .pll[6] = 0x75, + .pll[7] = 0xB3, + .pll[8] = 0x1, + .pll[9] = 0x1, + .pll[10] = 0, + .pll[11] = 0, + .pll[12] = 0, + .pll[13] = 0, + .pll[14] = 0, + .pll[15] = 0x1, + .pll[16] = 0x85, + .pll[17] = 0x0F, + .pll[18] = 0xE6, + .pll[19] = 0x23, +}; + +static const struct intel_c10pll_state mtl_c10_dp_hbr2 = { + .clock = 540000, + .tx = 0x10, + .cmn = 0x21, + .pll[0] = 0xF4, + .pll[1] = 0, + .pll[2] = 0xF8, + .pll[3] = 0, + .pll[4] = 0x20, + .pll[5] = 0x0A, + .pll[6] = 0x29, + .pll[7] = 0x10, + .pll[8] = 0x1, + .pll[9] = 0x1, + .pll[10] = 0, + .pll[11] = 0, + .pll[12] = 0xA0, + .pll[13] = 0, + .pll[14] = 0, + .pll[15] = 0, + .pll[16] = 0x84, + .pll[17] = 0x4F, + .pll[18] = 0xE5, + .pll[19] = 0x23, +}; + +static const struct intel_c10pll_state mtl_c10_edp_r675 = { + .clock = 675000, + .tx = 0x10, + .cmn = 0x21, + .pll[0] = 0xB4, + .pll[1] = 0, + .pll[2] = 0x3E, + .pll[3] = 0x1, + .pll[4] = 0xA8, + .pll[5] = 0x0C, + .pll[6] = 0x33, + .pll[7] = 0x54, + .pll[8] = 0x1, + .pll[9] = 0x1, + .pll[10] = 0, + .pll[11] = 0, + .pll[12] = 0xC8, + .pll[13] = 0, + .pll[14] = 0, + .pll[15] = 0, + .pll[16] = 0x85, + .pll[17] = 0x8F, + .pll[18] = 0xE6, + .pll[19] = 0x23, +}; + +static const struct intel_c10pll_state mtl_c10_dp_hbr3 = { + .clock = 810000, + .tx = 0x10, + .cmn = 0x21, + .pll[0] = 0x34, + .pll[1] = 0, + .pll[2] = 0x84, + .pll[3] = 0x1, + .pll[4] = 0x30, + .pll[5] = 0x0F, + .pll[6] = 0x3D, + .pll[7] = 0x98, + .pll[8] = 0x1, + .pll[9] = 0x1, + .pll[10] = 0, + .pll[11] = 0, + .pll[12] = 0xF0, + .pll[13] = 0, + .pll[14] = 0, + .pll[15] = 0, + .pll[16] = 0x84, + .pll[17] = 0x0F, + .pll[18] = 0xE5, + .pll[19] = 0x23, +}; + +static const struct intel_c10pll_state * const mtl_c10_dp_tables[] = { + &mtl_c10_dp_rbr, + &mtl_c10_dp_hbr1, + &mtl_c10_dp_hbr2, + &mtl_c10_dp_hbr3, + NULL, +}; + +static const struct intel_c10pll_state * const mtl_c10_edp_tables[] = { + &mtl_c10_dp_rbr, + &mtl_c10_edp_r216, + &mtl_c10_edp_r243, + &mtl_c10_dp_hbr1, + &mtl_c10_edp_r324, + &mtl_c10_edp_r432, + &mtl_c10_dp_hbr2, + &mtl_c10_edp_r675, + &mtl_c10_dp_hbr3, + NULL, +}; + +static const struct intel_c10pll_state * const * +intel_c10pll_tables_get(struct intel_crtc_state *crtc_state, + struct intel_encoder *encoder) +{ + if (intel_crtc_has_dp_encoder(crtc_state)) { + if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_EDP)) + return mtl_c10_edp_tables; + else + return mtl_c10_dp_tables; + } + + /* TODO: Add HDMI Support */ + MISSING_CASE(encoder->type); + return NULL; +} + +static void intel_c10pll_update_pll(struct intel_crtc_state *crtc_state, + struct intel_encoder *encoder) +{ + struct drm_i915_private *i915 = to_i915(encoder->base.dev); + struct intel_cx0pll_state *pll_state = &crtc_state->cx0pll_state; + int i; + + if (intel_crtc_has_dp_encoder(crtc_state)) { + if (intel_panel_use_ssc(i915)) { + struct intel_dp *intel_dp = enc_to_intel_dp(encoder); + + pll_state->ssc_enabled = + (intel_dp->dpcd[DP_MAX_DOWNSPREAD] & DP_MAX_DOWNSPREAD_0_5); + } + } + + if (pll_state->ssc_enabled) + return; + + drm_WARN_ON(&i915->drm, ARRAY_SIZE(pll_state->c10.pll) < 9); + for (i = 4; i < 9; i++) + pll_state->c10.pll[i] = 0; +} + +static int intel_c10pll_calc_state(struct intel_crtc_state *crtc_state, + struct intel_encoder *encoder) +{ + const struct intel_c10pll_state * const *tables; + int i; + + tables = intel_c10pll_tables_get(crtc_state, encoder); + if (!tables) + return -EINVAL; + + for (i = 0; tables[i]; i++) { + if (crtc_state->port_clock == tables[i]->clock) { + crtc_state->cx0pll_state.c10 = *tables[i]; + intel_c10pll_update_pll(crtc_state, encoder); + + return 0; + } + } + + return -EINVAL; +} + +int intel_cx0pll_calc_state(struct intel_crtc_state *crtc_state, + struct intel_encoder *encoder) +{ + struct drm_i915_private *i915 = to_i915(encoder->base.dev); + enum phy phy = intel_port_to_phy(i915, encoder->port); + + drm_WARN_ON(&i915->drm, !intel_is_c10phy(i915, phy)); + + return intel_c10pll_calc_state(crtc_state, encoder); +} + +void intel_c10pll_readout_hw_state(struct intel_encoder *encoder, + struct intel_c10pll_state *pll_state) +{ + struct drm_i915_private *i915 = to_i915(encoder->base.dev); + u8 lane = INTEL_CX0_LANE0; + intel_wakeref_t wakeref; + int i; + + wakeref = intel_cx0_phy_transaction_begin(encoder); + + /* + * According to C10 VDR Register programming Sequence we need + * to do this to read PHY internal registers from MsgBus. + */ + intel_cx0_rmw(i915, encoder->port, lane, PHY_C10_VDR_CONTROL(1), + 0, C10_VDR_CTRL_MSGBUS_ACCESS, + MB_WRITE_COMMITTED); + + for (i = 0; i < ARRAY_SIZE(pll_state->pll); i++) + pll_state->pll[i] = intel_cx0_read(i915, encoder->port, lane, + PHY_C10_VDR_PLL(i)); + + pll_state->cmn = intel_cx0_read(i915, encoder->port, lane, PHY_C10_VDR_CMN(0)); + pll_state->tx = intel_cx0_read(i915, encoder->port, lane, PHY_C10_VDR_TX(0)); + + intel_cx0_phy_transaction_end(encoder, wakeref); +} + +static void intel_c10_pll_program(struct drm_i915_private *i915, + const struct intel_crtc_state *crtc_state, + struct intel_encoder *encoder) +{ + const struct intel_c10pll_state *pll_state = &crtc_state->cx0pll_state.c10; + int i; + + intel_cx0_rmw(i915, encoder->port, INTEL_CX0_BOTH_LANES, PHY_C10_VDR_CONTROL(1), + 0, C10_VDR_CTRL_MSGBUS_ACCESS, + MB_WRITE_COMMITTED); + /* Custom width needs to be programmed to 0 for both the phy lanes */ + intel_cx0_rmw(i915, encoder->port, INTEL_CX0_BOTH_LANES, PHY_C10_VDR_CUSTOM_WIDTH, + C10_VDR_CUSTOM_WIDTH_MASK, C10_VDR_CUSTOM_WIDTH_8_10, + MB_WRITE_COMMITTED); + intel_cx0_rmw(i915, encoder->port, INTEL_CX0_BOTH_LANES, PHY_C10_VDR_CONTROL(1), + 0, C10_VDR_CTRL_UPDATE_CFG, + MB_WRITE_COMMITTED); + + /* Program the pll values only for the master lane */ + for (i = 0; i < ARRAY_SIZE(pll_state->pll); i++) + intel_cx0_write(i915, encoder->port, INTEL_CX0_LANE0, PHY_C10_VDR_PLL(i), + pll_state->pll[i], + (i % 4) ? MB_WRITE_UNCOMMITTED : MB_WRITE_COMMITTED); + + intel_cx0_write(i915, encoder->port, INTEL_CX0_LANE0, PHY_C10_VDR_CMN(0), pll_state->cmn, MB_WRITE_COMMITTED); + intel_cx0_write(i915, encoder->port, INTEL_CX0_LANE0, PHY_C10_VDR_TX(0), pll_state->tx, MB_WRITE_COMMITTED); + + intel_cx0_rmw(i915, encoder->port, INTEL_CX0_LANE0, PHY_C10_VDR_CONTROL(1), + 0, C10_VDR_CTRL_MASTER_LANE | C10_VDR_CTRL_UPDATE_CFG, + MB_WRITE_COMMITTED); +} + +void intel_c10pll_dump_hw_state(struct drm_i915_private *i915, + const struct intel_c10pll_state *hw_state) +{ + bool fracen; + int i; + unsigned int frac_quot = 0, frac_rem = 0, frac_den = 1; + unsigned int multiplier, tx_clk_div; + + fracen = hw_state->pll[0] & C10_PLL0_FRACEN; + drm_dbg_kms(&i915->drm, "c10pll_hw_state: fracen: %s, ", + str_yes_no(fracen)); + + if (fracen) { + frac_quot = hw_state->pll[12] << 8 | hw_state->pll[11]; + frac_rem = hw_state->pll[14] << 8 | hw_state->pll[13]; + frac_den = hw_state->pll[10] << 8 | hw_state->pll[9]; + drm_dbg_kms(&i915->drm, "quot: %u, rem: %u, den: %u,\n", + frac_quot, frac_rem, frac_den); + } + + multiplier = (REG_FIELD_GET8(C10_PLL3_MULTIPLIERH_MASK, hw_state->pll[3]) << 8 | + hw_state->pll[2]) / 2 + 16; + tx_clk_div = REG_FIELD_GET8(C10_PLL15_TXCLKDIV_MASK, hw_state->pll[15]); + drm_dbg_kms(&i915->drm, + "multiplier: %u, tx_clk_div: %u.\n", multiplier, tx_clk_div); + + drm_dbg_kms(&i915->drm, "c10pll_rawhw_state:"); + drm_dbg_kms(&i915->drm, "tx: 0x%x, cmn: 0x%x\n", hw_state->tx, hw_state->cmn); + + BUILD_BUG_ON(ARRAY_SIZE(hw_state->pll) % 4); + for (i = 0; i < ARRAY_SIZE(hw_state->pll); i = i + 4) + drm_dbg_kms(&i915->drm, "pll[%d] = 0x%x, pll[%d] = 0x%x, pll[%d] = 0x%x, pll[%d] = 0x%x\n", + i, hw_state->pll[i], i + 1, hw_state->pll[i + 1], + i + 2, hw_state->pll[i + 2], i + 3, hw_state->pll[i + 3]); +} + +int intel_c10pll_calc_port_clock(struct intel_encoder *encoder, + const struct intel_c10pll_state *pll_state) +{ + unsigned int frac_quot = 0, frac_rem = 0, frac_den = 1; + unsigned int multiplier, tx_clk_div, refclk = 38400; + + if (pll_state->pll[0] & C10_PLL0_FRACEN) { + frac_quot = pll_state->pll[12] << 8 | pll_state->pll[11]; + frac_rem = pll_state->pll[14] << 8 | pll_state->pll[13]; + frac_den = pll_state->pll[10] << 8 | pll_state->pll[9]; + } + + multiplier = (REG_FIELD_GET8(C10_PLL3_MULTIPLIERH_MASK, pll_state->pll[3]) << 8 | + pll_state->pll[2]) / 2 + 16; + + tx_clk_div = REG_FIELD_GET8(C10_PLL15_TXCLKDIV_MASK, pll_state->pll[15]); + + return DIV_ROUND_CLOSEST_ULL(mul_u32_u32(refclk, (multiplier << 16) + frac_quot) + + DIV_ROUND_CLOSEST(refclk * frac_rem, frac_den), + 10 << (tx_clk_div + 16)); +} + +static void intel_program_port_clock_ctl(struct intel_encoder *encoder, + const struct intel_crtc_state *crtc_state, + bool lane_reversal) +{ + struct drm_i915_private *i915 = to_i915(encoder->base.dev); + u32 val = 0; + + intel_de_rmw(i915, XELPDP_PORT_BUF_CTL1(encoder->port), XELPDP_PORT_REVERSAL, + lane_reversal ? XELPDP_PORT_REVERSAL : 0); + + if (lane_reversal) + val |= XELPDP_LANE1_PHY_CLOCK_SELECT; + + val |= XELPDP_FORWARD_CLOCK_UNGATE; + val |= XELPDP_DDI_CLOCK_SELECT(XELPDP_DDI_CLOCK_SELECT_MAXPCLK); + + /* TODO: HDMI FRL */ + /* TODO: DP2.0 10G and 20G rates enable MPLLA*/ + val |= crtc_state->cx0pll_state.ssc_enabled ? XELPDP_SSC_ENABLE_PLLB : 0; + + intel_de_rmw(i915, XELPDP_PORT_CLOCK_CTL(encoder->port), + XELPDP_LANE1_PHY_CLOCK_SELECT | + XELPDP_FORWARD_CLOCK_UNGATE | + XELPDP_DDI_CLOCK_SELECT_MASK | + XELPDP_SSC_ENABLE_PLLB, val); +} + +static u32 intel_cx0_get_powerdown_update(u8 lane_mask) +{ + u32 val = 0; + int lane = 0; + + for_each_cx0_lane_in_mask(lane_mask, lane) + val |= XELPDP_LANE_POWERDOWN_UPDATE(lane); + + return val; +} + +static u32 intel_cx0_get_powerdown_state(u8 lane_mask, u8 state) +{ + u32 val = 0; + int lane = 0; + + for_each_cx0_lane_in_mask(lane_mask, lane) + val |= XELPDP_LANE_POWERDOWN_NEW_STATE(lane, state); + + return val; +} + +static void intel_cx0_powerdown_change_sequence(struct drm_i915_private *i915, + enum port port, + u8 lane_mask, u8 state) +{ + enum phy phy = intel_port_to_phy(i915, port); + int lane; + + intel_de_rmw(i915, XELPDP_PORT_BUF_CTL2(port), + intel_cx0_get_powerdown_state(INTEL_CX0_BOTH_LANES, XELPDP_LANE_POWERDOWN_NEW_STATE_MASK), + intel_cx0_get_powerdown_state(lane_mask, state)); + + /* Wait for pending transactions.*/ + for_each_cx0_lane_in_mask(lane_mask, lane) + if (intel_de_wait_for_clear(i915, XELPDP_PORT_M2P_MSGBUS_CTL(port, lane), + XELPDP_PORT_M2P_TRANSACTION_PENDING, + XELPDP_MSGBUS_TIMEOUT_SLOW)) { + drm_dbg_kms(&i915->drm, + "PHY %c Timeout waiting for previous transaction to complete. Reset the bus.\n", + phy_name(phy)); + intel_cx0_bus_reset(i915, port, lane); + } + + intel_de_rmw(i915, XELPDP_PORT_BUF_CTL2(port), + intel_cx0_get_powerdown_update(INTEL_CX0_BOTH_LANES), + intel_cx0_get_powerdown_update(lane_mask)); + + /* Update Timeout Value */ + if (__intel_de_wait_for_register(i915, XELPDP_PORT_BUF_CTL2(port), + intel_cx0_get_powerdown_update(lane_mask), 0, + XELPDP_PORT_POWERDOWN_UPDATE_TIMEOUT_US, 0, NULL)) + drm_warn(&i915->drm, "PHY %c failed to bring out of Lane reset after %dus.\n", + phy_name(phy), XELPDP_PORT_RESET_START_TIMEOUT_US); +} + +static void intel_cx0_setup_powerdown(struct drm_i915_private *i915, enum port port) +{ + intel_de_rmw(i915, XELPDP_PORT_BUF_CTL2(port), + XELPDP_POWER_STATE_READY_MASK, + XELPDP_POWER_STATE_READY(CX0_P2_STATE_READY)); + intel_de_rmw(i915, XELPDP_PORT_BUF_CTL3(port), + XELPDP_POWER_STATE_ACTIVE_MASK | + XELPDP_PLL_LANE_STAGGERING_DELAY_MASK, + XELPDP_POWER_STATE_ACTIVE(CX0_P0_STATE_ACTIVE) | + XELPDP_PLL_LANE_STAGGERING_DELAY(0)); +} + +static u32 intel_cx0_get_pclk_refclk_request(u8 lane_mask) +{ + u32 val = 0; + int lane = 0; + + for_each_cx0_lane_in_mask(lane_mask, lane) + val |= XELPDP_LANE_PCLK_REFCLK_REQUEST(lane); + + return val; +} + +static u32 intel_cx0_get_pclk_refclk_ack(u8 lane_mask) +{ + u32 val = 0; + int lane = 0; + + for_each_cx0_lane_in_mask(lane_mask, lane) + val |= XELPDP_LANE_PCLK_REFCLK_ACK(lane); + + return val; +} + +/* FIXME: Some Type-C cases need not reset both the lanes. Handle those cases. */ +static void intel_cx0_phy_lane_reset(struct drm_i915_private *i915, enum port port, + bool lane_reversal) +{ + enum phy phy = intel_port_to_phy(i915, port); + u8 lane_mask = lane_reversal ? INTEL_CX0_LANE1 : + INTEL_CX0_LANE0; + + if (__intel_de_wait_for_register(i915, XELPDP_PORT_BUF_CTL1(port), + XELPDP_PORT_BUF_SOC_PHY_READY, + XELPDP_PORT_BUF_SOC_PHY_READY, + XELPDP_PORT_BUF_SOC_READY_TIMEOUT_US, 0, NULL)) + drm_warn(&i915->drm, "PHY %c failed to bring out of SOC reset after %dus.\n", + phy_name(phy), XELPDP_PORT_BUF_SOC_READY_TIMEOUT_US); + + intel_de_rmw(i915, XELPDP_PORT_BUF_CTL2(port), + XELPDP_LANE_PIPE_RESET(0) | XELPDP_LANE_PIPE_RESET(1), + XELPDP_LANE_PIPE_RESET(0) | XELPDP_LANE_PIPE_RESET(1)); + + if (__intel_de_wait_for_register(i915, XELPDP_PORT_BUF_CTL2(port), + XELPDP_LANE_PHY_CURRENT_STATUS(0) | + XELPDP_LANE_PHY_CURRENT_STATUS(1), + XELPDP_LANE_PHY_CURRENT_STATUS(0) | + XELPDP_LANE_PHY_CURRENT_STATUS(1), + XELPDP_PORT_RESET_START_TIMEOUT_US, 0, NULL)) + drm_warn(&i915->drm, "PHY %c failed to bring out of Lane reset after %dus.\n", + phy_name(phy), XELPDP_PORT_RESET_START_TIMEOUT_US); + + intel_de_rmw(i915, XELPDP_PORT_CLOCK_CTL(port), + intel_cx0_get_pclk_refclk_request(INTEL_CX0_BOTH_LANES), + intel_cx0_get_pclk_refclk_request(lane_mask)); + + if (__intel_de_wait_for_register(i915, XELPDP_PORT_CLOCK_CTL(port), + intel_cx0_get_pclk_refclk_ack(INTEL_CX0_BOTH_LANES), + intel_cx0_get_pclk_refclk_ack(lane_mask), + XELPDP_REFCLK_ENABLE_TIMEOUT_US, 0, NULL)) + drm_warn(&i915->drm, "PHY %c failed to request refclk after %dus.\n", + phy_name(phy), XELPDP_REFCLK_ENABLE_TIMEOUT_US); + + intel_cx0_powerdown_change_sequence(i915, port, INTEL_CX0_BOTH_LANES, + CX0_P2_STATE_RESET); + intel_cx0_setup_powerdown(i915, port); + + intel_de_rmw(i915, XELPDP_PORT_BUF_CTL2(port), + XELPDP_LANE_PIPE_RESET(0) | XELPDP_LANE_PIPE_RESET(1), + 0); + + if (intel_de_wait_for_clear(i915, XELPDP_PORT_BUF_CTL2(port), + XELPDP_LANE_PHY_CURRENT_STATUS(0) | + XELPDP_LANE_PHY_CURRENT_STATUS(1), + XELPDP_PORT_RESET_END_TIMEOUT)) + drm_warn(&i915->drm, "PHY %c failed to bring out of Lane reset after %dms.\n", + phy_name(phy), XELPDP_PORT_RESET_END_TIMEOUT); +} + +static void intel_c10_program_phy_lane(struct drm_i915_private *i915, + struct intel_encoder *encoder, int lane_count, + bool lane_reversal) +{ + u8 l0t1, l0t2, l1t1, l1t2; + bool dp_alt_mode = intel_tc_port_in_dp_alt_mode(enc_to_dig_port(encoder)); + enum port port = encoder->port; + + intel_cx0_rmw(i915, port, INTEL_CX0_BOTH_LANES, PHY_C10_VDR_CONTROL(1), + 0, C10_VDR_CTRL_MSGBUS_ACCESS, + MB_WRITE_COMMITTED); + + /* TODO: DP-alt MFD case where only one PHY lane should be programmed. */ + l0t1 = intel_cx0_read(i915, port, INTEL_CX0_LANE0, PHY_CX0_TX_CONTROL(1, 2)); + l0t2 = intel_cx0_read(i915, port, INTEL_CX0_LANE0, PHY_CX0_TX_CONTROL(2, 2)); + l1t1 = intel_cx0_read(i915, port, INTEL_CX0_LANE1, PHY_CX0_TX_CONTROL(1, 2)); + l1t2 = intel_cx0_read(i915, port, INTEL_CX0_LANE1, PHY_CX0_TX_CONTROL(2, 2)); + + l0t1 |= CONTROL2_DISABLE_SINGLE_TX; + l0t2 |= CONTROL2_DISABLE_SINGLE_TX; + l1t1 |= CONTROL2_DISABLE_SINGLE_TX; + l1t2 |= CONTROL2_DISABLE_SINGLE_TX; + + if (lane_reversal) { + switch (lane_count) { + case 4: + l0t1 &= ~CONTROL2_DISABLE_SINGLE_TX; + fallthrough; + case 3: + l0t2 &= ~CONTROL2_DISABLE_SINGLE_TX; + fallthrough; + case 2: + l1t1 &= ~CONTROL2_DISABLE_SINGLE_TX; + fallthrough; + case 1: + l1t2 &= ~CONTROL2_DISABLE_SINGLE_TX; + break; + default: + MISSING_CASE(lane_count); + } + } else { + switch (lane_count) { + case 4: + l1t2 &= ~CONTROL2_DISABLE_SINGLE_TX; + fallthrough; + case 3: + l1t1 &= ~CONTROL2_DISABLE_SINGLE_TX; + fallthrough; + case 2: + l0t2 &= ~CONTROL2_DISABLE_SINGLE_TX; + l0t1 &= ~CONTROL2_DISABLE_SINGLE_TX; + break; + case 1: + if (dp_alt_mode) + l0t2 &= ~CONTROL2_DISABLE_SINGLE_TX; + else + l0t1 &= ~CONTROL2_DISABLE_SINGLE_TX; + break; + default: + MISSING_CASE(lane_count); + } + } + + /* disable MLs */ + intel_cx0_write(i915, port, INTEL_CX0_LANE0, PHY_CX0_TX_CONTROL(1, 2), + l0t1, MB_WRITE_COMMITTED); + intel_cx0_write(i915, port, INTEL_CX0_LANE0, PHY_CX0_TX_CONTROL(2, 2), + l0t2, MB_WRITE_COMMITTED); + intel_cx0_write(i915, port, INTEL_CX0_LANE1, PHY_CX0_TX_CONTROL(1, 2), + l1t1, MB_WRITE_COMMITTED); + intel_cx0_write(i915, port, INTEL_CX0_LANE1, PHY_CX0_TX_CONTROL(2, 2), + l1t2, MB_WRITE_COMMITTED); + + intel_cx0_rmw(i915, port, INTEL_CX0_BOTH_LANES, PHY_C10_VDR_CONTROL(1), + 0, C10_VDR_CTRL_UPDATE_CFG, + MB_WRITE_COMMITTED); +} + +static u32 intel_cx0_get_pclk_pll_request(u8 lane_mask) +{ + u32 val = 0; + int lane = 0; + + for_each_cx0_lane_in_mask(lane_mask, lane) + val |= XELPDP_LANE_PCLK_PLL_REQUEST(lane); + + return val; +} + +static u32 intel_cx0_get_pclk_pll_ack(u8 lane_mask) +{ + u32 val = 0; + int lane = 0; + + for_each_cx0_lane_in_mask(lane_mask, lane) + val |= XELPDP_LANE_PCLK_PLL_ACK(lane); + + return val; +} + +static void intel_c10pll_enable(struct intel_encoder *encoder, + const struct intel_crtc_state *crtc_state) +{ + struct drm_i915_private *i915 = to_i915(encoder->base.dev); + enum phy phy = intel_port_to_phy(i915, encoder->port); + struct intel_digital_port *dig_port = enc_to_dig_port(encoder); + bool lane_reversal = dig_port->saved_port_bits & DDI_BUF_PORT_REVERSAL; + u8 maxpclk_lane = lane_reversal ? INTEL_CX0_LANE1 : + INTEL_CX0_LANE0; + + /* + * 1. Program PORT_CLOCK_CTL REGISTER to configure + * clock muxes, gating and SSC + */ + intel_program_port_clock_ctl(encoder, crtc_state, lane_reversal); + + /* 2. Bring PHY out of reset. */ + intel_cx0_phy_lane_reset(i915, encoder->port, lane_reversal); + + /* + * 3. Change Phy power state to Ready. + * TODO: For DP alt mode use only one lane. + */ + intel_cx0_powerdown_change_sequence(i915, encoder->port, INTEL_CX0_BOTH_LANES, + CX0_P2_STATE_READY); + + /* 4. Program PHY internal PLL internal registers. */ + intel_c10_pll_program(i915, crtc_state, encoder); + + /* + * 5. Program the enabled and disabled owned PHY lane + * transmitters over message bus + */ + intel_c10_program_phy_lane(i915, encoder, crtc_state->lane_count, lane_reversal); + + /* + * 6. Follow the Display Voltage Frequency Switching - Sequence + * Before Frequency Change. We handle this step in bxt_set_cdclk(). + */ + + /* + * 7. Program DDI_CLK_VALFREQ to match intended DDI + * clock frequency. + */ + intel_de_write(i915, DDI_CLK_VALFREQ(encoder->port), + crtc_state->port_clock); + + /* + * 8. Set PORT_CLOCK_CTL register PCLK PLL Request + * LN<Lane for maxPCLK> to "1" to enable PLL. + */ + intel_de_rmw(i915, XELPDP_PORT_CLOCK_CTL(encoder->port), + intel_cx0_get_pclk_pll_request(INTEL_CX0_BOTH_LANES), + intel_cx0_get_pclk_pll_request(maxpclk_lane)); + + /* 9. Poll on PORT_CLOCK_CTL PCLK PLL Ack LN<Lane for maxPCLK> == "1". */ + if (__intel_de_wait_for_register(i915, XELPDP_PORT_CLOCK_CTL(encoder->port), + intel_cx0_get_pclk_pll_ack(INTEL_CX0_BOTH_LANES), + intel_cx0_get_pclk_pll_ack(maxpclk_lane), + XELPDP_PCLK_PLL_ENABLE_TIMEOUT_US, 0, NULL)) + drm_warn(&i915->drm, "Port %c PLL not locked after %dus.\n", + phy_name(phy), XELPDP_PCLK_PLL_ENABLE_TIMEOUT_US); + + /* + * 10. Follow the Display Voltage Frequency Switching Sequence After + * Frequency Change. We handle this step in bxt_set_cdclk(). + */ +} + +void intel_cx0pll_enable(struct intel_encoder *encoder, + const struct intel_crtc_state *crtc_state) +{ + struct drm_i915_private *i915 = to_i915(encoder->base.dev); + enum phy phy = intel_port_to_phy(i915, encoder->port); + intel_wakeref_t wakeref; + + wakeref = intel_cx0_phy_transaction_begin(encoder); + + drm_WARN_ON(&i915->drm, !intel_is_c10phy(i915, phy)); + intel_c10pll_enable(encoder, crtc_state); + + /* TODO: enable TBT-ALT mode */ + intel_cx0_phy_transaction_end(encoder, wakeref); +} + +static void intel_c10pll_disable(struct intel_encoder *encoder) +{ + struct drm_i915_private *i915 = to_i915(encoder->base.dev); + enum phy phy = intel_port_to_phy(i915, encoder->port); + + /* 1. Change owned PHY lane power to Disable state. */ + intel_cx0_powerdown_change_sequence(i915, encoder->port, INTEL_CX0_BOTH_LANES, + CX0_P2PG_STATE_DISABLE); + + /* + * 2. Follow the Display Voltage Frequency Switching Sequence Before + * Frequency Change. We handle this step in bxt_set_cdclk(). + */ + + /* + * 3. Set PORT_CLOCK_CTL register PCLK PLL Request LN<Lane for maxPCLK> + * to "0" to disable PLL. + */ + intel_de_rmw(i915, XELPDP_PORT_CLOCK_CTL(encoder->port), + intel_cx0_get_pclk_pll_request(INTEL_CX0_BOTH_LANES) | + intel_cx0_get_pclk_refclk_request(INTEL_CX0_BOTH_LANES), 0); + + /* 4. Program DDI_CLK_VALFREQ to 0. */ + intel_de_write(i915, DDI_CLK_VALFREQ(encoder->port), 0); + + /* + * 5. Poll on PORT_CLOCK_CTL PCLK PLL Ack LN<Lane for maxPCLK**> == "0". + */ + if (__intel_de_wait_for_register(i915, XELPDP_PORT_CLOCK_CTL(encoder->port), + intel_cx0_get_pclk_pll_ack(INTEL_CX0_BOTH_LANES) | + intel_cx0_get_pclk_refclk_ack(INTEL_CX0_BOTH_LANES), 0, + XELPDP_PCLK_PLL_DISABLE_TIMEOUT_US, 0, NULL)) + drm_warn(&i915->drm, "Port %c PLL not unlocked after %dus.\n", + phy_name(phy), XELPDP_PCLK_PLL_DISABLE_TIMEOUT_US); + + /* + * 6. Follow the Display Voltage Frequency Switching Sequence After + * Frequency Change. We handle this step in bxt_set_cdclk(). + */ + + /* 7. Program PORT_CLOCK_CTL register to disable and gate clocks. */ + intel_de_rmw(i915, XELPDP_PORT_CLOCK_CTL(encoder->port), + XELPDP_DDI_CLOCK_SELECT_MASK | + XELPDP_FORWARD_CLOCK_UNGATE, 0); +} + +void intel_cx0pll_disable(struct intel_encoder *encoder) +{ + struct drm_i915_private *i915 = to_i915(encoder->base.dev); + enum phy phy = intel_port_to_phy(i915, encoder->port); + intel_wakeref_t wakeref; + + wakeref = intel_cx0_phy_transaction_begin(encoder); + + drm_WARN_ON(&i915->drm, !intel_is_c10phy(i915, phy)); + intel_c10pll_disable(encoder); + intel_cx0_phy_transaction_end(encoder, wakeref); +} + +void intel_c10pll_state_verify(struct intel_atomic_state *state, + struct intel_crtc_state *new_crtc_state) +{ + struct drm_i915_private *i915 = to_i915(state->base.dev); + struct intel_c10pll_state mpllb_hw_state = { 0 }; + struct intel_c10pll_state *mpllb_sw_state = &new_crtc_state->cx0pll_state.c10; + struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->uapi.crtc); + struct intel_encoder *encoder; + enum phy phy; + int i; + + if (DISPLAY_VER(i915) < 14) + return; + + if (!new_crtc_state->hw.active) + return; + + encoder = intel_get_crtc_new_encoder(state, new_crtc_state); + phy = intel_port_to_phy(i915, encoder->port); + + if (!intel_is_c10phy(i915, phy)) + return; + + intel_c10pll_readout_hw_state(encoder, &mpllb_hw_state); + + for (i = 0; i < ARRAY_SIZE(mpllb_sw_state->pll); i++) { + u8 expected = mpllb_sw_state->pll[i]; + + I915_STATE_WARN(mpllb_hw_state.pll[i] != expected, + "[CRTC:%d:%s] mismatch in C10MPLLB: Register[%d] (expected 0x%02x, found 0x%02x)", + crtc->base.base.id, crtc->base.name, + i, expected, mpllb_hw_state.pll[i]); + } + + I915_STATE_WARN(mpllb_hw_state.tx != mpllb_sw_state->tx, + "[CRTC:%d:%s] mismatch in C10MPLLB: Register TX0 (expected 0x%02x, found 0x%02x)", + crtc->base.base.id, crtc->base.name, + mpllb_sw_state->tx, mpllb_hw_state.tx); + + I915_STATE_WARN(mpllb_hw_state.cmn != mpllb_sw_state->cmn, + "[CRTC:%d:%s] mismatch in C10MPLLB: Register CMN0 (expected 0x%02x, found 0x%02x)", + crtc->base.base.id, crtc->base.name, + mpllb_sw_state->cmn, mpllb_hw_state.cmn); +} |