Merge tag 'v4.13-rc1' into fixes

The fixes branch is based off a random pre-rc1 commit, because we had
some fixes that needed to go in before rc1 was released.

However we now need to fix some code that went in after that point, but
before rc1, so merge rc1 to get that code into fixes so we can fix it!

1 files changed, 41 insertions, 193 deletions

diff --git a/arch/mips/generic/board-sead3.c b/arch/mips/generic/board-sead3.c
index f4ae0584a33b..f109a6b9fdd0 100644
--- a/arch/mips/generic/board-sead3.c
+++ b/arch/mips/generic/board-sead3.c
@@ -13,10 +13,12 @@
 #include <linux/errno.h>
 #include <linux/libfdt.h>
 #include <linux/printk.h>
+#include <linux/sizes.h>
 
 #include <asm/fw/fw.h>
 #include <asm/io.h>
 #include <asm/machine.h>
+#include <asm/yamon-dt.h>
 
 #define SEAD_CONFIG			CKSEG1ADDR(0x1b100110)
 #define SEAD_CONFIG_GIC_PRESENT		BIT(1)
@@ -25,6 +27,15 @@
 #define MIPS_REVISION_MACHINE		(0xf << 4)
 #define MIPS_REVISION_MACHINE_SEAD3	(0x4 << 4)
 
+/*
+ * Maximum 384MB RAM at physical address 0, preceding any I/O.
+ */
+static struct yamon_mem_region mem_regions[] __initdata = {
+	/* start	size */
+	{ 0,		SZ_256M + SZ_128M },
+	{}
+};
+
 static __init bool sead3_detect(void)
 {
 	uint32_t rev;
@@ -33,96 +44,9 @@ static __init bool sead3_detect(void)
 	return (rev & MIPS_REVISION_MACHINE) == MIPS_REVISION_MACHINE_SEAD3;
 }
 
-static __init int append_cmdline(void *fdt)
-{
-	int err, chosen_off;
-
-	/* find or add chosen node */
-	chosen_off = fdt_path_offset(fdt, "/chosen");
-	if (chosen_off == -FDT_ERR_NOTFOUND)
-		chosen_off = fdt_path_offset(fdt, "/chosen@0");
-	if (chosen_off == -FDT_ERR_NOTFOUND)
-		chosen_off = fdt_add_subnode(fdt, 0, "chosen");
-	if (chosen_off < 0) {
-		pr_err("Unable to find or add DT chosen node: %d\n",
-		       chosen_off);
-		return chosen_off;
-	}
-
-	err = fdt_setprop_string(fdt, chosen_off, "bootargs", fw_getcmdline());
-	if (err) {
-		pr_err("Unable to set bootargs property: %d\n", err);
-		return err;
-	}
-
-	return 0;
-}
-
 static __init int append_memory(void *fdt)
 {
-	unsigned long phys_memsize, memsize;
-	__be32 mem_array[2];
-	int err, mem_off;
-	char *var;
-
-	/* find memory size from the bootloader environment */
-	var = fw_getenv("memsize");
-	if (var) {
-		err = kstrtoul(var, 0, &phys_memsize);
-		if (err) {
-			pr_err("Failed to read memsize env variable '%s'\n",
-			       var);
-			return -EINVAL;
-		}
-	} else {
-		pr_warn("The bootloader didn't provide memsize: defaulting to 32MB\n");
-		phys_memsize = 32 << 20;
-	}
-
-	/* default to using all available RAM */
-	memsize = phys_memsize;
-
-	/* allow the user to override the usable memory */
-	var = strstr(arcs_cmdline, "memsize=");
-	if (var)
-		memsize = memparse(var + strlen("memsize="), NULL);
-
-	/* if the user says there's more RAM than we thought, believe them */
-	phys_memsize = max_t(unsigned long, phys_memsize, memsize);
-
-	/* find or add a memory node */
-	mem_off = fdt_path_offset(fdt, "/memory");
-	if (mem_off == -FDT_ERR_NOTFOUND)
-		mem_off = fdt_add_subnode(fdt, 0, "memory");
-	if (mem_off < 0) {
-		pr_err("Unable to find or add memory DT node: %d\n", mem_off);
-		return mem_off;
-	}
-
-	err = fdt_setprop_string(fdt, mem_off, "device_type", "memory");
-	if (err) {
-		pr_err("Unable to set memory node device_type: %d\n", err);
-		return err;
-	}
-
-	mem_array[0] = 0;
-	mem_array[1] = cpu_to_be32(phys_memsize);
-	err = fdt_setprop(fdt, mem_off, "reg", mem_array, sizeof(mem_array));
-	if (err) {
-		pr_err("Unable to set memory regs property: %d\n", err);
-		return err;
-	}
-
-	mem_array[0] = 0;
-	mem_array[1] = cpu_to_be32(memsize);
-	err = fdt_setprop(fdt, mem_off, "linux,usable-memory",
-			  mem_array, sizeof(mem_array));
-	if (err) {
-		pr_err("Unable to set linux,usable-memory property: %d\n", err);
-		return err;
-	}
-
-	return 0;
+	return yamon_dt_append_memory(fdt, mem_regions);
 }
 
 static __init int remove_gic(void *fdt)
@@ -163,14 +87,16 @@ static __init int remove_gic(void *fdt)
 		return -EINVAL;
 	}
 
-	err = fdt_setprop_u32(fdt, 0, "interrupt-parent", cpu_phandle);
-	if (err) {
-		pr_err("unable to set root interrupt-parent: %d\n", err);
-		return err;
-	}
-
 	uart_off = fdt_node_offset_by_compatible(fdt, -1, "ns16550a");
 	while (uart_off >= 0) {
+		err = fdt_setprop_u32(fdt, uart_off, "interrupt-parent",
+				      cpu_phandle);
+		if (err) {
+			pr_warn("unable to set UART interrupt-parent: %d\n",
+				err);
+			return err;
+		}
+
 		err = fdt_setprop_u32(fdt, uart_off, "interrupts",
 				      cpu_uart_int);
 		if (err) {
@@ -193,6 +119,12 @@ static __init int remove_gic(void *fdt)
 		return eth_off;
 	}
 
+	err = fdt_setprop_u32(fdt, eth_off, "interrupt-parent", cpu_phandle);
+	if (err) {
+		pr_err("unable to set ethernet interrupt-parent: %d\n", err);
+		return err;
+	}
+
 	err = fdt_setprop_u32(fdt, eth_off, "interrupts", cpu_eth_int);
 	if (err) {
 		pr_err("unable to set ethernet interrupts property: %d\n", err);
@@ -205,94 +137,29 @@ static __init int remove_gic(void *fdt)
 		return ehci_off;
 	}
 
-	err = fdt_setprop_u32(fdt, ehci_off, "interrupts", cpu_ehci_int);
+	err = fdt_setprop_u32(fdt, ehci_off, "interrupt-parent", cpu_phandle);
 	if (err) {
-		pr_err("unable to set EHCI interrupts property: %d\n", err);
+		pr_err("unable to set EHCI interrupt-parent: %d\n", err);
 		return err;
 	}
 
-	return 0;
-}
-
-static __init int serial_config(void *fdt)
-{
-	const char *yamontty, *mode_var;
-	char mode_var_name[9], path[18], parity;
-	unsigned int uart, baud, stop_bits;
-	bool hw_flow;
-	int chosen_off, err;
-
-	yamontty = fw_getenv("yamontty");
-	if (!yamontty || !strcmp(yamontty, "tty0")) {
-		uart = 0;
-	} else if (!strcmp(yamontty, "tty1")) {
-		uart = 1;
-	} else {
-		pr_warn("yamontty environment variable '%s' invalid\n",
-			yamontty);
-		uart = 0;
-	}
-
-	baud = stop_bits = 0;
-	parity = 0;
-	hw_flow = false;
-
-	snprintf(mode_var_name, sizeof(mode_var_name), "modetty%u", uart);
-	mode_var = fw_getenv(mode_var_name);
-	if (mode_var) {
-		while (mode_var[0] >= '0' && mode_var[0] <= '9') {
-			baud *= 10;
-			baud += mode_var[0] - '0';
-			mode_var++;
-		}
-		if (mode_var[0] == ',')
-			mode_var++;
-		if (mode_var[0])
-			parity = mode_var[0];
-		if (mode_var[0] == ',')
-			mode_var++;
-		if (mode_var[0])
-			stop_bits = mode_var[0] - '0';
-		if (mode_var[0] == ',')
-			mode_var++;
-		if (!strcmp(mode_var, "hw"))
-			hw_flow = true;
-	}
-
-	if (!baud)
-		baud = 38400;
-
-	if (parity != 'e' && parity != 'n' && parity != 'o')
-		parity = 'n';
-
-	if (stop_bits != 7 && stop_bits != 8)
-		stop_bits = 8;
-
-	WARN_ON(snprintf(path, sizeof(path), "uart%u:%u%c%u%s",
-			 uart, baud, parity, stop_bits,
-			 hw_flow ? "r" : "") >= sizeof(path));
-
-	/* find or add chosen node */
-	chosen_off = fdt_path_offset(fdt, "/chosen");
-	if (chosen_off == -FDT_ERR_NOTFOUND)
-		chosen_off = fdt_path_offset(fdt, "/chosen@0");
-	if (chosen_off == -FDT_ERR_NOTFOUND)
-		chosen_off = fdt_add_subnode(fdt, 0, "chosen");
-	if (chosen_off < 0) {
-		pr_err("Unable to find or add DT chosen node: %d\n",
-		       chosen_off);
-		return chosen_off;
-	}
-
-	err = fdt_setprop_string(fdt, chosen_off, "stdout-path", path);
+	err = fdt_setprop_u32(fdt, ehci_off, "interrupts", cpu_ehci_int);
 	if (err) {
-		pr_err("Unable to set stdout-path property: %d\n", err);
+		pr_err("unable to set EHCI interrupts property: %d\n", err);
 		return err;
 	}
 
 	return 0;
 }
 
+static const struct mips_fdt_fixup sead3_fdt_fixups[] __initconst = {
+	{ yamon_dt_append_cmdline, "append command line" },
+	{ append_memory, "append memory" },
+	{ remove_gic, "remove GIC when not present" },
+	{ yamon_dt_serial_config, "append serial configuration" },
+	{ },
+};
+
 static __init const void *sead3_fixup_fdt(const void *fdt,
 					  const void *match_data)
 {
@@ -307,29 +174,10 @@ static __init const void *sead3_fixup_fdt(const void *fdt,
 
 	fw_init_cmdline();
 
-	err = fdt_open_into(fdt, fdt_buf, sizeof(fdt_buf));
-	if (err)
-		panic("Unable to open FDT: %d", err);
-
-	err = append_cmdline(fdt_buf);
-	if (err)
-		panic("Unable to patch FDT: %d", err);
-
-	err = append_memory(fdt_buf);
-	if (err)
-		panic("Unable to patch FDT: %d", err);
-
-	err = remove_gic(fdt_buf);
-	if (err)
-		panic("Unable to patch FDT: %d", err);
-
-	err = serial_config(fdt_buf);
-	if (err)
-		panic("Unable to patch FDT: %d", err);
-
-	err = fdt_pack(fdt_buf);
+	err = apply_mips_fdt_fixups(fdt_buf, sizeof(fdt_buf),
+				    fdt, sead3_fdt_fixups);
 	if (err)
-		panic("Unable to pack FDT: %d\n", err);
+		panic("Unable to fixup FDT: %d", err);
 
 	return fdt_buf;
 }