Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (171 commits)
  Blackfin arch: fix bug - BF527 0.2 silicon has different CPUID (DSPID) value
  Blackfin arch: Enlarge flash partition for kenel for bf533/bf537 boards
  Blackfin arch: fix bug: kernel crash when enable SDIO host driver
  Blackfin arch: Print FP at level KERN_NOTICE
  Blackfin arch: drop ad73311 test code
  Blackfin arch: update board default configs
  Blackfin arch: Set PB4 as the default irq for bf548 board v1.4+.
  Blackfin arch: fix typo in early printk bit size processing
  Blackfin arch: enable reprogram cclk and sclk for bf518f-ezbrd
  Blackfin arch: add SDIO host driver platform data
  Blackfin arch: fix bug - kernel stops at initial console
  Blackfin arch: fix bug - kernel crash after config IP for ethernet port
  Blackfin arch: add sdh support for bf518f-ezbrd
  Blackfin arch: fix bug - kernel detects BF532 incorrectly
  Blackfin arch: add () to avoid warnings from gcc
  Blackfin arch: change HWTRACE Kconfig and set it on default
  Blackfin arch: Clean oprofile build path for blackfin
  Blackfin arch: remove hardware PM code, oprofile not use it
  Blackfin arch: rewrite get_sclk()/get_vco()
  Blackfin arch: cleanup and unify the ins functions
  ...

1 files changed, 93 insertions, 0 deletions

diff --git a/arch/blackfin/mach-common/clocks-init.c b/arch/blackfin/mach-common/clocks-init.c
new file mode 100644
index 000000000000..5d182abefc7b
--- /dev/null
+++ b/arch/blackfin/mach-common/clocks-init.c
@@ -0,0 +1,93 @@
+/*
+ * arch/blackfin/mach-common/clocks-init.c - reprogram clocks / memory
+ *
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/blackfin.h>
+
+#include <asm/dma.h>
+#include <asm/clocks.h>
+#include <asm/mem_init.h>
+
+#define PLL_CTL_VAL \
+	(((CONFIG_VCO_MULT & 63) << 9) | CLKIN_HALF | \
+	 (PLL_BYPASS << 8) | (ANOMALY_05000265 ? 0x8000 : 0))
+
+__attribute__((l1_text))
+static void do_sync(void)
+{
+	__builtin_bfin_ssync();
+}
+
+__attribute__((l1_text))
+void init_clocks(void)
+{
+	/* Kill any active DMAs as they may trigger external memory accesses
+	 * in the middle of reprogramming things, and that'll screw us up.
+	 * For example, any automatic DMAs left by U-Boot for splash screens.
+	 */
+	size_t i;
+	for (i = 0; i < MAX_DMA_CHANNELS; ++i) {
+		struct dma_register *dma = dma_io_base_addr[i];
+		dma->cfg = 0;
+	}
+
+	do_sync();
+
+#ifdef SIC_IWR0
+	bfin_write_SIC_IWR0(IWR_ENABLE(0));
+# ifdef SIC_IWR1
+	/* BF52x system reset does not properly reset SIC_IWR1 which
+	 * will screw up the bootrom as it relies on MDMA0/1 waking it
+	 * up from IDLE instructions.  See this report for more info:
+	 * http://blackfin.uclinux.org/gf/tracker/4323
+	 */
+	if (ANOMALY_05000435)
+		bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11));
+	else
+		bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
+# endif
+# ifdef SIC_IWR2
+	bfin_write_SIC_IWR2(IWR_DISABLE_ALL);
+# endif
+#else
+	bfin_write_SIC_IWR(IWR_ENABLE(0));
+#endif
+	do_sync();
+#ifdef EBIU_SDGCTL
+	bfin_write_EBIU_SDGCTL(bfin_read_EBIU_SDGCTL() | SRFS);
+	do_sync();
+#endif
+
+#ifdef CLKBUFOE
+	bfin_write16(VR_CTL, bfin_read_VR_CTL() | CLKBUFOE);
+	do_sync();
+	__asm__ __volatile__("IDLE;");
+#endif
+	bfin_write_PLL_LOCKCNT(0x300);
+	do_sync();
+	bfin_write16(PLL_CTL, PLL_CTL_VAL);
+	__asm__ __volatile__("IDLE;");
+	bfin_write_PLL_DIV(CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
+#ifdef EBIU_SDGCTL
+	bfin_write_EBIU_SDRRC(mem_SDRRC);
+	bfin_write_EBIU_SDGCTL(mem_SDGCTL);
+#else
+	bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() & ~(SRREQ));
+	do_sync();
+	bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() | 0x1);
+	bfin_write_EBIU_DDRCTL0(mem_DDRCTL0);
+	bfin_write_EBIU_DDRCTL1(mem_DDRCTL1);
+	bfin_write_EBIU_DDRCTL2(mem_DDRCTL2);
+#ifdef CONFIG_MEM_EBIU_DDRQUE
+	bfin_write_EBIU_DDRQUE(CONFIG_MEM_EBIU_DDRQUE);
+#endif
+#endif
+	do_sync();
+	bfin_read16(0);
+}