Merge tag 'i2c-host-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow

This release includes significant updates, with the primary
change being the renaming from "master/slave" to
"controller/target" to adhere to I2C v7 and SMBus 3.2 standards.

New Support:

 - Added support for Intel Arrow Lake-H.
 - Added I2C support in the Arioha SoC by linking the Mediatek
   I2C controller.

Cleanups:

 - Added the MODULE_DESCRIPTION() macro, resolving a modpost
   warning in the ALi 1563 Southbridge driver.
 - Constified the regmap_config declaration in the i2c-designware
   driver.
 - Improved the coding style in the Renesas R-Car driver by
   removing unnecessary semicolons after brackets.

General improvements:

 - In the OMAP device, replaced NOIRQ_SYSTEM_SLEEP_PM_OPS with
   RUNTIME_PM_OPS to enable waking up the controller during
   suspend() before suspend_noirq() kicks in.
 - Improved logging in the Xilinx driver.
 - Added a warning (WARN()) in the Renesas R-Car driver for
   spurious interrupts.

DTS Changes:

 - Removed address-cell and size-cell from the Atmel at91sam,
   nVidia Tegra 20, and Samsung S3c2410 devices.
 - Fixed Texas Instruments OMAP4 I2C controller to comply with
   the i2c-controller.yaml schema.
 - Improved indentation in DTS examples for several I2C devices.
 - Converted the NXP LPC1788 binding to the dt-schema.
 - Added documentation for the compatible string
   thead,th1520-i2c.
 - Added the "power-domains" property for the Meson I2C driver.

25 files changed, 267 insertions, 271 deletions

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 11e57ba2985c..27ec49af1bf2 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -788,25 +788,6 @@
 			Documentation/networking/netconsole.rst for an
 			alternative.
 
-		<DEVNAME>:<n>.<n>[,options]
-			Use the specified serial port on the serial core bus.
-			The addressing uses DEVNAME of the physical serial port
-			device, followed by the serial core controller instance,
-			and the serial port instance. The options are the same
-			as documented for the ttyS addressing above.
-
-			The mapping of the serial ports to the tty instances
-			can be viewed with:
-
-			$ ls -d /sys/bus/serial-base/devices/*:*.*/tty/*
-			/sys/bus/serial-base/devices/00:04:0.0/tty/ttyS0
-
-			In the above example, the console can be addressed with
-			console=00:04:0.0. Note that a console addressed this
-			way will only get added when the related device driver
-			is ready. The use of an earlycon parameter in addition to
-			the console may be desired for console output early on.
-
 		uart[8250],io,<addr>[,options]
 		uart[8250],mmio,<addr>[,options]
 		uart[8250],mmio16,<addr>[,options]
diff --git a/Documentation/arch/riscv/cmodx.rst b/Documentation/arch/riscv/cmodx.rst
index 1c0ca06b6c97..8c48bcff3df9 100644
--- a/Documentation/arch/riscv/cmodx.rst
+++ b/Documentation/arch/riscv/cmodx.rst
@@ -62,10 +62,10 @@ cmodx.c::
 		printf("Value before cmodx: %d\n", value);
 
 		// Call prctl before first fence.i is called inside modify_instruction
-		prctl(PR_RISCV_SET_ICACHE_FLUSH_CTX_ON, PR_RISCV_CTX_SW_FENCEI, PR_RISCV_SCOPE_PER_PROCESS);
+		prctl(PR_RISCV_SET_ICACHE_FLUSH_CTX, PR_RISCV_CTX_SW_FENCEI_ON, PR_RISCV_SCOPE_PER_PROCESS);
 		modify_instruction();
 		// Call prctl after final fence.i is called in process
-		prctl(PR_RISCV_SET_ICACHE_FLUSH_CTX_OFF, PR_RISCV_CTX_SW_FENCEI, PR_RISCV_SCOPE_PER_PROCESS);
+		prctl(PR_RISCV_SET_ICACHE_FLUSH_CTX, PR_RISCV_CTX_SW_FENCEI_OFF, PR_RISCV_SCOPE_PER_PROCESS);
 
 		value = get_value();
 		printf("Value after cmodx: %d\n", value);
diff --git a/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml b/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml
index 26bed558c6b8..c4cc8af18280 100644
--- a/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml
@@ -30,6 +30,9 @@ properties:
   clocks:
     minItems: 1
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
index b2d19cfb87ad..e61cdb5b16ef 100644
--- a/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
@@ -26,6 +26,7 @@ properties:
               - microchip,sam9x60-i2c
       - items:
           - enum:
+              - microchip,sama7d65-i2c
               - microchip,sama7g5-i2c
               - microchip,sam9x7-i2c
           - const: microchip,sam9x60-i2c
@@ -36,12 +37,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  "#address-cells":
-    const: 1
-
-  "#size-cells":
-    const: 0
-
   clocks:
     maxItems: 1
 
@@ -72,8 +67,6 @@ required:
   - compatible
   - reg
   - interrupts
-  - "#address-cells"
-  - "#size-cells"
   - clocks
 
 allOf:
@@ -86,6 +79,7 @@ allOf:
               - atmel,sama5d4-i2c
               - atmel,sama5d2-i2c
               - microchip,sam9x60-i2c
+              - microchip,sama7d65-i2c
               - microchip,sama7g5-i2c
     then:
       properties:
diff --git a/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml b/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml
index 7070c04469ed..ac9ddf228c82 100644
--- a/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml
@@ -76,21 +76,21 @@ else:
 
 examples:
   - |
-      bsca: i2c@f0406200 {
-          clock-frequency = <390000>;
-          compatible = "brcm,brcmstb-i2c";
-          interrupt-parent = <&irq0_intc>;
-          reg = <0xf0406200 0x58>;
-          interrupts = <0x18>;
-          interrupt-names = "upg_bsca";
-      };
+    bsca: i2c@f0406200 {
+        compatible = "brcm,brcmstb-i2c";
+        reg = <0xf0406200 0x58>;
+        clock-frequency = <390000>;
+        interrupt-parent = <&irq0_intc>;
+        interrupts = <0x18>;
+        interrupt-names = "upg_bsca";
+    };
 
   - |
-      ddc0: i2c@7ef04500 {
-          compatible = "brcm,bcm2711-hdmi-i2c";
-          reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>;
-          reg-names = "bsc", "auto-i2c";
-          clock-frequency = <390000>;
-      };
+    ddc0: i2c@7ef04500 {
+        compatible = "brcm,bcm2711-hdmi-i2c";
+        reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>;
+        reg-names = "bsc", "auto-i2c";
+        clock-frequency = <390000>;
+    };
 
 ...
diff --git a/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.yaml b/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.yaml
index b813f6d4810c..1eaf00b90a77 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.yaml
@@ -109,65 +109,65 @@ examples:
     // Example for a bus to be demuxed.  It contains various I2C clients for
     // HDMI, so the bus is named "i2c-hdmi":
     i2chdmi: i2c-mux3 {
-            compatible = "i2c-demux-pinctrl";
-            i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>;
-            i2c-bus-name = "i2c-hdmi";
-            #address-cells = <1>;
-            #size-cells = <0>;
-
-            ak4643: codec@12 {
-                    compatible = "asahi-kasei,ak4643";
-                    #sound-dai-cells = <0>;
-                    reg = <0x12>;
-            };
-
-            composite-in@20 {
-                    compatible = "adi,adv7180";
-                    reg = <0x20>;
+        compatible = "i2c-demux-pinctrl";
+        i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>;
+        i2c-bus-name = "i2c-hdmi";
+        #address-cells = <1>;
+        #size-cells = <0>;
 
-                    port {
-                            adv7180: endpoint {
-                                    bus-width = <8>;
-                                    remote-endpoint = <&vin1ep0>;
-                            };
-                    };
+        ak4643: codec@12 {
+            compatible = "asahi-kasei,ak4643";
+            #sound-dai-cells = <0>;
+            reg = <0x12>;
+        };
+
+        composite-in@20 {
+            compatible = "adi,adv7180";
+            reg = <0x20>;
+
+            port {
+                adv7180: endpoint {
+                    bus-width = <8>;
+                    remote-endpoint = <&vin1ep0>;
+                };
             };
+        };
+
+        hdmi@39 {
+            compatible = "adi,adv7511w";
+            reg = <0x39>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+            clocks = <&cec_clock>;
+            clock-names = "cec";
+
+            avdd-supply = <&fixedregulator1v8>;
+            dvdd-supply = <&fixedregulator1v8>;
+            pvdd-supply = <&fixedregulator1v8>;
+            dvdd-3v-supply = <&fixedregulator3v3>;
+            bgvdd-supply = <&fixedregulator1v8>;
+
+            adi,input-depth = <8>;
+            adi,input-colorspace = "rgb";
+            adi,input-clock = "1x";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    adv7511_in: endpoint {
+                        remote-endpoint = <&lvds0_out>;
+                    };
+                };
 
-            hdmi@39 {
-                    compatible = "adi,adv7511w";
-                    reg = <0x39>;
-                    interrupt-parent = <&gpio1>;
-                    interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
-                    clocks = <&cec_clock>;
-                    clock-names = "cec";
-
-                    avdd-supply = <&fixedregulator1v8>;
-                    dvdd-supply = <&fixedregulator1v8>;
-                    pvdd-supply = <&fixedregulator1v8>;
-                    dvdd-3v-supply = <&fixedregulator3v3>;
-                    bgvdd-supply = <&fixedregulator1v8>;
-
-                    adi,input-depth = <8>;
-                    adi,input-colorspace = "rgb";
-                    adi,input-clock = "1x";
-
-                    ports {
-                            #address-cells = <1>;
-                            #size-cells = <0>;
-
-                            port@0 {
-                                    reg = <0>;
-                                    adv7511_in: endpoint {
-                                            remote-endpoint = <&lvds0_out>;
-                                    };
-                            };
-
-                            port@1 {
-                                    reg = <1>;
-                                    adv7511_out: endpoint {
-                                            remote-endpoint = <&hdmi_con_out>;
-                                    };
-                            };
+                port@1 {
+                    reg = <1>;
+                    adv7511_out: endpoint {
+                        remote-endpoint = <&hdmi_con_out>;
                     };
+                };
             };
+        };
     };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-lpc2k.txt b/Documentation/devicetree/bindings/i2c/i2c-lpc2k.txt
deleted file mode 100644
index 4101aa621ad4..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-lpc2k.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-NXP I2C controller for LPC2xxx/178x/18xx/43xx
-
-Required properties:
- - compatible: must be "nxp,lpc1788-i2c"
- - reg: physical address and length of the device registers
- - interrupts: a single interrupt specifier
- - clocks: clock for the device
- - #address-cells: should be <1>
- - #size-cells: should be <0>
-
-Optional properties:
-- clock-frequency: the desired I2C bus clock frequency in Hz; in
-  absence of this property the default value is used (100 kHz).
-
-Example:
-i2c0: i2c@400a1000 {
-	compatible = "nxp,lpc1788-i2c";
-	reg = <0x400a1000 0x1000>;
-	interrupts = <18>;
-	clocks = <&ccu1 CLK_APB1_I2C0>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-};
-
-&i2c0 {
-	clock-frequency = <400000>;
-
-	lm75@48 {
-		compatible = "nxp,lm75";
-		reg = <0x48>;
-	};
-};
-
diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml
index 424a4fc218b6..92fbc1a2671a 100644
--- a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml
@@ -87,12 +87,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  '#address-cells':
-    const: 1
-
-  '#size-cells':
-    const: 0
-
   clocks:
     minItems: 1
     maxItems: 2
diff --git a/Documentation/devicetree/bindings/i2c/nxp,lpc1788-i2c.yaml b/Documentation/devicetree/bindings/i2c/nxp,lpc1788-i2c.yaml
new file mode 100644
index 000000000000..9a1b95c2d03c
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/nxp,lpc1788-i2c.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/nxp,lpc1788-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP I2C controller for LPC2xxx/178x/18xx/43xx
+
+maintainers:
+  - Vladimir Zapolskiy <vz@mleia.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: nxp,lpc1788-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    description: the desired I2C bus clock frequency in Hz
+    default: 100000
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include "dt-bindings/clock/lpc18xx-ccu.h"
+
+    i2c@400a1000 {
+        compatible = "nxp,lpc1788-i2c";
+        reg = <0x400a1000 0x1000>;
+        interrupts = <18>;
+        clocks = <&ccu1 CLK_APB1_I2C0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/renesas,iic-emev2.yaml b/Documentation/devicetree/bindings/i2c/renesas,iic-emev2.yaml
index 17c1102562be..551cfa6f885a 100644
--- a/Documentation/devicetree/bindings/i2c/renesas,iic-emev2.yaml
+++ b/Documentation/devicetree/bindings/i2c/renesas,iic-emev2.yaml
@@ -44,11 +44,11 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     iic0: i2c@e0070000 {
-            #address-cells = <1>;
-            #size-cells = <0>;
-            compatible = "renesas,iic-emev2";
-            reg = <0xe0070000 0x28>;
-            interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
-            clocks = <&iic0_sclk>;
-            clock-names = "sclk";
+        compatible = "renesas,iic-emev2";
+        reg = <0xe0070000 0x28>;
+        interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
+        clocks = <&iic0_sclk>;
+        clock-names = "sclk";
+        #address-cells = <1>;
+        #size-cells = <0>;
     };
diff --git a/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml b/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml
index 51b220da461b..6cc60c3f61cd 100644
--- a/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml
@@ -153,14 +153,14 @@ examples:
     #include <dt-bindings/power/r8a7791-sysc.h>
 
     i2c0: i2c@e6508000 {
-            #address-cells = <1>;
-            #size-cells = <0>;
-            compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c";
-            reg = <0xe6508000 0x40>;
-            interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
-            clock-frequency = <400000>;
-            clocks = <&cpg CPG_MOD 931>;
-            power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-            resets = <&cpg 931>;
-            i2c-scl-internal-delay-ns = <6>;
+        compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c";
+        reg = <0xe6508000 0x40>;
+        interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+        clock-frequency = <400000>;
+        clocks = <&cpg CPG_MOD 931>;
+        power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+        resets = <&cpg 931>;
+        i2c-scl-internal-delay-ns = <6>;
+        #address-cells = <1>;
+        #size-cells = <0>;
     };
diff --git a/Documentation/devicetree/bindings/i2c/renesas,riic.yaml b/Documentation/devicetree/bindings/i2c/renesas,riic.yaml
index 91ecf17b7a81..7993fe463c4c 100644
--- a/Documentation/devicetree/bindings/i2c/renesas,riic.yaml
+++ b/Documentation/devicetree/bindings/i2c/renesas,riic.yaml
@@ -97,21 +97,21 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     i2c0: i2c@fcfee000 {
-            compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
-            reg = <0xfcfee000 0x44>;
-            interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>,
-                         <GIC_SPI 159 IRQ_TYPE_EDGE_RISING>,
-                         <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
-            interrupt-names = "tei", "ri", "ti", "spi", "sti", "naki", "ali",
-                              "tmoi";
-            clocks = <&mstp9_clks R7S72100_CLK_I2C0>;
-            clock-frequency = <100000>;
-            power-domains = <&cpg_clocks>;
-            #address-cells = <1>;
-            #size-cells = <0>;
+        compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+        reg = <0xfcfee000 0x44>;
+        interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 159 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "tei", "ri", "ti", "spi", "sti", "naki", "ali",
+                          "tmoi";
+        clocks = <&mstp9_clks R7S72100_CLK_I2C0>;
+        clock-frequency = <100000>;
+        power-domains = <&cpg_clocks>;
+        #address-cells = <1>;
+        #size-cells = <0>;
     };
diff --git a/Documentation/devicetree/bindings/i2c/renesas,rmobile-iic.yaml b/Documentation/devicetree/bindings/i2c/renesas,rmobile-iic.yaml
index 04e4ffd80bc0..ec5222a1224f 100644
--- a/Documentation/devicetree/bindings/i2c/renesas,rmobile-iic.yaml
+++ b/Documentation/devicetree/bindings/i2c/renesas,rmobile-iic.yaml
@@ -134,16 +134,16 @@ examples:
     #include <dt-bindings/power/r8a7790-sysc.h>
 
     iic0: i2c@e6500000 {
-            compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic",
-                         "renesas,rmobile-iic";
-            reg = <0xe6500000 0x425>;
-            interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
-            clocks = <&cpg CPG_MOD 318>;
-            clock-frequency = <400000>;
-            dmas = <&dmac0 0x61>, <&dmac0 0x62>, <&dmac1 0x61>, <&dmac1 0x62>;
-            dma-names = "tx", "rx", "tx", "rx";
-            power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-            resets = <&cpg 318>;
-            #address-cells = <1>;
-            #size-cells = <0>;
+        compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic",
+                     "renesas,rmobile-iic";
+        reg = <0xe6500000 0x425>;
+        interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 318>;
+        clock-frequency = <400000>;
+        dmas = <&dmac0 0x61>, <&dmac0 0x62>, <&dmac1 0x61>, <&dmac1 0x62>;
+        dma-names = "tx", "rx", "tx", "rx";
+        power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+        resets = <&cpg 318>;
+        #address-cells = <1>;
+        #size-cells = <0>;
     };
diff --git a/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml b/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml
index 1303502cf265..bbc568485627 100644
--- a/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml
@@ -26,9 +26,6 @@ properties:
               - samsung,exynos850-i2c
           - const: samsung,s3c2440-i2c
 
-  '#address-cells':
-    const: 1
-
   clocks:
     maxItems: 1
 
@@ -73,9 +70,6 @@ properties:
     $ref: /schemas/types.yaml#/definitions/phandle
     description: Pandle to syscon used to control the system registers.
 
-  '#size-cells':
-    const: 0
-
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml
index d9293c57f573..60035a787e5c 100644
--- a/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml
@@ -33,6 +33,10 @@ properties:
           - const: snps,designware-i2c
       - description: Baikal-T1 SoC System I2C controller
         const: baikal,bt1-sys-i2c
+      - description: T-HEAD TH1520 SoCs I2C controller
+        items:
+          - const: thead,th1520-i2c
+          - const: snps,designware-i2c
 
   reg:
     minItems: 1
diff --git a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
index 8fd8be76875e..457bb0702ed9 100644
--- a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
@@ -145,31 +145,31 @@ examples:
     #include <dt-bindings/mfd/stm32f7-rcc.h>
     #include <dt-bindings/clock/stm32fx-clock.h>
     //Example 1 (with st,stm32f4-i2c compatible)
-      i2c@40005400 {
-          compatible = "st,stm32f4-i2c";
-          #address-cells = <1>;
-          #size-cells = <0>;
-          reg = <0x40005400 0x400>;
-          interrupts = <31>,
-                       <32>;
-          resets = <&rcc 277>;
-          clocks = <&rcc 0 149>;
-      };
+    i2c@40005400 {
+        compatible = "st,stm32f4-i2c";
+        reg = <0x40005400 0x400>;
+        interrupts = <31>,
+                     <32>;
+        resets = <&rcc 277>;
+        clocks = <&rcc 0 149>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
 
   - |
     #include <dt-bindings/mfd/stm32f7-rcc.h>
     #include <dt-bindings/clock/stm32fx-clock.h>
     //Example 2 (with st,stm32f7-i2c compatible)
-      i2c@40005800 {
-          compatible = "st,stm32f7-i2c";
-          #address-cells = <1>;
-          #size-cells = <0>;
-          reg = <0x40005800 0x400>;
-          interrupts = <31>,
-                       <32>;
-          resets = <&rcc STM32F7_APB1_RESET(I2C1)>;
-          clocks = <&rcc 1 CLK_I2C1>;
-      };
+    i2c@40005800 {
+        compatible = "st,stm32f7-i2c";
+        reg = <0x40005800 0x400>;
+        interrupts = <31>,
+                     <32>;
+        resets = <&rcc STM32F7_APB1_RESET(I2C1)>;
+        clocks = <&rcc 1 CLK_I2C1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
 
   - |
     #include <dt-bindings/mfd/stm32f7-rcc.h>
@@ -178,16 +178,16 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/stm32mp1-clks.h>
     #include <dt-bindings/reset/stm32mp1-resets.h>
-      i2c@40013000 {
-          compatible = "st,stm32mp15-i2c";
-          #address-cells = <1>;
-          #size-cells = <0>;
-          reg = <0x40013000 0x400>;
-          interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
-                       <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-          clocks = <&rcc I2C2_K>;
-          resets = <&rcc I2C2_R>;
-          i2c-scl-rising-time-ns = <185>;
-          i2c-scl-falling-time-ns = <20>;
-          st,syscfg-fmp = <&syscfg 0x4 0x2>;
-      };
+    i2c@40013000 {
+        compatible = "st,stm32mp15-i2c";
+        reg = <0x40013000 0x400>;
+        interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&rcc I2C2_K>;
+        resets = <&rcc I2C2_R>;
+        i2c-scl-rising-time-ns = <185>;
+        i2c-scl-falling-time-ns = <20>;
+        st,syscfg-fmp = <&syscfg 0x4 0x2>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/ti,omap4-i2c.yaml b/Documentation/devicetree/bindings/i2c/ti,omap4-i2c.yaml
index 781108ae1ce3..8c2e35fabf5b 100644
--- a/Documentation/devicetree/bindings/i2c/ti,omap4-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/ti,omap4-i2c.yaml
@@ -37,16 +37,8 @@ properties:
   clock-names:
     const: fck
 
-  clock-frequency: true
-
   power-domains: true
 
-  "#address-cells":
-    const: 1
-
-  "#size-cells":
-    const: 0
-
   ti,hwmods:
     description:
       Must be "i2c<n>", n being the instance number (1-based).
@@ -55,38 +47,34 @@ properties:
     $ref: /schemas/types.yaml#/definitions/string
     deprecated: true
 
-# subnode's properties
-patternProperties:
-  "@[0-9a-f]+$":
-    type: object
-    description:
-      Flash device uses the below defined properties in the subnode.
-
 required:
   - compatible
   - reg
   - interrupts
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - ti,omap2420-i2c
+            - ti,omap2430-i2c
+            - ti,omap3-i2c
+            - ti,omap4-i2c
 
-if:
-  properties:
-    compatible:
-      enum:
-        - ti,omap2420-i2c
-        - ti,omap2430-i2c
-        - ti,omap3-i2c
-        - ti,omap4-i2c
+    then:
+      properties:
+        ti,hwmods:
+          items:
+            - pattern: "^i2c([1-9])$"
 
-then:
-  properties:
-    ti,hwmods:
-      items:
-        - pattern: "^i2c([1-9])$"
+    else:
+      properties:
+        ti,hwmods: false
 
-else:
-  properties:
-    ti,hwmods: false
+unevaluatedProperties: false
 
 examples:
   - |
@@ -94,9 +82,9 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     main_i2c0: i2c@2000000 {
-            compatible = "ti,j721e-i2c", "ti,omap4-i2c";
-            reg = <0x2000000 0x100>;
-            interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
-            #address-cells = <1>;
-            #size-cells = <0>;
-         };
+        compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+        reg = <0x2000000 0x100>;
+        interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml b/Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml
index c80c880a9dab..60aaf30d68ed 100644
--- a/Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml
+++ b/Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml
@@ -128,7 +128,6 @@ required:
   - cell-index
   - reg
   - fsl,fman-ports
-  - ptp-timer
 
 dependencies:
   pcs-handle-names:
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
index 50846a2d09c8..0bf2d9f093b5 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
@@ -29,7 +29,6 @@ properties:
           - qcom,pm7325-gpio
           - qcom,pm7550ba-gpio
           - qcom,pm8005-gpio
-          - qcom,pm8008-gpio
           - qcom,pm8018-gpio
           - qcom,pm8019-gpio
           - qcom,pm8038-gpio
@@ -126,7 +125,6 @@ allOf:
         compatible:
           contains:
             enum:
-              - qcom,pm8008-gpio
               - qcom,pmi8950-gpio
               - qcom,pmr735d-gpio
     then:
@@ -448,7 +446,6 @@ $defs:
                  - gpio1-gpio10 for pm7325
                  - gpio1-gpio8 for pm7550ba
                  - gpio1-gpio4 for pm8005
-                 - gpio1-gpio2 for pm8008
                  - gpio1-gpio6 for pm8018
                  - gpio1-gpio12 for pm8038
                  - gpio1-gpio40 for pm8058
diff --git a/Documentation/driver-api/cxl/memory-devices.rst b/Documentation/driver-api/cxl/memory-devices.rst
index 5149ecdc53c7..d732c42526df 100644
--- a/Documentation/driver-api/cxl/memory-devices.rst
+++ b/Documentation/driver-api/cxl/memory-devices.rst
@@ -328,6 +328,12 @@ CXL Memory Device
 .. kernel-doc:: drivers/cxl/mem.c
    :doc: cxl mem
 
+.. kernel-doc:: drivers/cxl/cxlmem.h
+   :internal:
+
+.. kernel-doc:: drivers/cxl/core/memdev.c
+   :identifiers:
+
 CXL Port
 --------
 .. kernel-doc:: drivers/cxl/port.c
@@ -341,6 +347,15 @@ CXL Core
 .. kernel-doc:: drivers/cxl/cxl.h
    :internal:
 
+.. kernel-doc:: drivers/cxl/core/hdm.c
+   :doc: cxl core hdm
+
+.. kernel-doc:: drivers/cxl/core/hdm.c
+   :identifiers:
+
+.. kernel-doc:: drivers/cxl/core/cdat.c
+   :identifiers:
+
 .. kernel-doc:: drivers/cxl/core/port.c
    :doc: cxl core
 
diff --git a/Documentation/filesystems/proc.rst b/Documentation/filesystems/proc.rst
index 7c3a565ffbef..82d142de3461 100644
--- a/Documentation/filesystems/proc.rst
+++ b/Documentation/filesystems/proc.rst
@@ -571,6 +571,7 @@ encoded manner. The codes are the following:
     um    userfaultfd missing tracking
     uw    userfaultfd wr-protect tracking
     ss    shadow stack page
+    sl    sealed
     ==    =======================================
 
 Note that there is no guarantee that every flag and associated mnemonic will
diff --git a/Documentation/i2c/busses/i2c-i801.rst b/Documentation/i2c/busses/i2c-i801.rst
index 10eced6c2e46..c840b597912c 100644
--- a/Documentation/i2c/busses/i2c-i801.rst
+++ b/Documentation/i2c/busses/i2c-i801.rst
@@ -48,6 +48,7 @@ Supported adapters:
   * Intel Raptor Lake (PCH)
   * Intel Meteor Lake (SOC and PCH)
   * Intel Birch Stream (SOC)
+  * Intel Arrow Lake (SOC)
 
    Datasheets: Publicly available at the Intel website
 
diff --git a/Documentation/kbuild/modules.rst b/Documentation/kbuild/modules.rst
index a1f3eb7a43e2..131863142cbb 100644
--- a/Documentation/kbuild/modules.rst
+++ b/Documentation/kbuild/modules.rst
@@ -128,7 +128,7 @@ executed to make module versioning work.
 
 	modules_install
 		Install the external module(s). The default location is
-		/lib/modules/<kernel_release>/extra/, but a prefix may
+		/lib/modules/<kernel_release>/updates/, but a prefix may
 		be added with INSTALL_MOD_PATH (discussed in section 5).
 
 	clean
@@ -417,7 +417,7 @@ directory:
 
 And external modules are installed in:
 
-	/lib/modules/$(KERNELRELEASE)/extra/
+	/lib/modules/$(KERNELRELEASE)/updates/
 
 5.1 INSTALL_MOD_PATH
 --------------------
@@ -438,10 +438,10 @@ And external modules are installed in:
 -------------------
 
 	External modules are by default installed to a directory under
-	/lib/modules/$(KERNELRELEASE)/extra/, but you may wish to
+	/lib/modules/$(KERNELRELEASE)/updates/, but you may wish to
 	locate modules for a specific functionality in a separate
 	directory. For this purpose, use INSTALL_MOD_DIR to specify an
-	alternative name to "extra."::
+	alternative name to "updates."::
 
 		$ make INSTALL_MOD_DIR=gandalf -C $KDIR \
 		       M=$PWD modules_install
diff --git a/Documentation/netlink/specs/ethtool.yaml b/Documentation/netlink/specs/ethtool.yaml
index 00dc61358be8..4510e8d1adcb 100644
--- a/Documentation/netlink/specs/ethtool.yaml
+++ b/Documentation/netlink/specs/ethtool.yaml
@@ -1603,7 +1603,7 @@ operations:
           attributes:
             - header
         reply:
-          attributes: &pse
+          attributes:
             - header
             - podl-pse-admin-state
             - podl-pse-admin-control
@@ -1620,7 +1620,10 @@ operations:
 
       do:
         request:
-          attributes: *pse
+          attributes:
+            - header
+            - podl-pse-admin-control
+            - c33-pse-admin-control
     -
       name: rss-get
       doc: Get RSS params.
diff --git a/Documentation/userspace-api/ioctl/ioctl-number.rst b/Documentation/userspace-api/ioctl/ioctl-number.rst
index a141e8e65c5d..9a97030c6c8d 100644
--- a/Documentation/userspace-api/ioctl/ioctl-number.rst
+++ b/Documentation/userspace-api/ioctl/ioctl-number.rst
@@ -186,6 +186,7 @@ Code  Seq#    Include File                                           Comments
 'Q'   all    linux/soundcard.h
 'R'   00-1F  linux/random.h                                          conflict!
 'R'   01     linux/rfkill.h                                          conflict!
+'R'   20-2F  linux/trace_mmap.h
 'R'   C0-DF  net/bluetooth/rfcomm.h
 'R'   E0     uapi/linux/fsl_mc.h
 'S'   all    linux/cdrom.h                                           conflict!