From 7a353289925f01cb188ebc6fc4f4a33456b7de44 Mon Sep 17 00:00:00 2001 From: RogerCC Lin Date: Mon, 19 Sep 2016 10:53:25 +0800 Subject: mtd: nand: fix generating over-boundary ECC data when writing When mtk_ecc_encode() is writing the ECC parity data to the OOB region,because each register is 4 bytes in length,but the len's unit is in bytes,the operation in the for loop will cross the ECC's boundary. Signed-off-by: RogerCC Lin Fixes: 1d6b1e464950 ("mtd: mediatek: driver for MTK Smart Device") Signed-off-by: Boris Brezillon --- drivers/mtd/nand/mtk_ecc.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/mtk_ecc.c b/drivers/mtd/nand/mtk_ecc.c index 25a4fbd4d24a..d54f666417e1 100644 --- a/drivers/mtd/nand/mtk_ecc.c +++ b/drivers/mtd/nand/mtk_ecc.c @@ -366,7 +366,8 @@ int mtk_ecc_encode(struct mtk_ecc *ecc, struct mtk_ecc_config *config, u8 *data, u32 bytes) { dma_addr_t addr; - u32 *p, len, i; + u8 *p; + u32 len, i, val; int ret = 0; addr = dma_map_single(ecc->dev, data, bytes, DMA_TO_DEVICE); @@ -392,11 +393,14 @@ int mtk_ecc_encode(struct mtk_ecc *ecc, struct mtk_ecc_config *config, /* Program ECC bytes to OOB: per sector oob = FDM + ECC + SPARE */ len = (config->strength * ECC_PARITY_BITS + 7) >> 3; - p = (u32 *)(data + bytes); + p = data + bytes; /* write the parity bytes generated by the ECC back to the OOB region */ - for (i = 0; i < len; i++) - p[i] = readl(ecc->regs + ECC_ENCPAR(i)); + for (i = 0; i < len; i++) { + if ((i % 4) == 0) + val = readl(ecc->regs + ECC_ENCPAR(i / 4)); + p[i] = (val >> ((i % 4) * 8)) & 0xff; + } timeout: dma_unmap_single(ecc->dev, addr, bytes, DMA_TO_DEVICE); -- cgit v1.2.3 From 559e58e7ed2dadc310f174e609ead8a3e8acfc4e Mon Sep 17 00:00:00 2001 From: RogerCC Lin Date: Mon, 19 Sep 2016 10:53:26 +0800 Subject: mtd: nand: fix chances to create incomplete ECC data when writing When mtk_nfc_do_write_page() comparing the sector number,because the sector number field is at the 12th-bit position of NFI_BYTELEN register,the masked register should be shifted 12 bits before being compared.The result of this bug may cause the second subpage has incomplete ECC parity bytes. Signed-off-by: RogerCC Lin Fixes: 1d6b1e464950 ("mtd: mediatek: driver for MTK Smart Device") Signed-off-by: Boris Brezillon --- drivers/mtd/nand/mtk_nand.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/mtk_nand.c b/drivers/mtd/nand/mtk_nand.c index ddaa2acb9dd7..5223a2182ee4 100644 --- a/drivers/mtd/nand/mtk_nand.c +++ b/drivers/mtd/nand/mtk_nand.c @@ -93,6 +93,9 @@ #define NFI_FSM_MASK (0xf << 16) #define NFI_ADDRCNTR (0x70) #define CNTR_MASK GENMASK(16, 12) +#define ADDRCNTR_SEC_SHIFT (12) +#define ADDRCNTR_SEC(val) \ + (((val) & CNTR_MASK) >> ADDRCNTR_SEC_SHIFT) #define NFI_STRADDR (0x80) #define NFI_BYTELEN (0x84) #define NFI_CSEL (0x90) @@ -699,7 +702,7 @@ static int mtk_nfc_do_write_page(struct mtd_info *mtd, struct nand_chip *chip, } ret = readl_poll_timeout_atomic(nfc->regs + NFI_ADDRCNTR, reg, - (reg & CNTR_MASK) >= chip->ecc.steps, + ADDRCNTR_SEC(reg) >= chip->ecc.steps, 10, MTK_TIMEOUT); if (ret) dev_err(dev, "hwecc write timeout\n"); @@ -902,7 +905,7 @@ static int mtk_nfc_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, dev_warn(nfc->dev, "read ahb/dma done timeout\n"); rc = readl_poll_timeout_atomic(nfc->regs + NFI_BYTELEN, reg, - (reg & CNTR_MASK) >= sectors, 10, + ADDRCNTR_SEC(reg) >= sectors, 10, MTK_TIMEOUT); if (rc < 0) { dev_err(nfc->dev, "subpage done timeout\n"); -- cgit v1.2.3 From 38178e7b88dcbe1ab384f27a7370074e774dda81 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= Date: Mon, 19 Sep 2016 11:09:40 +0200 Subject: mtd: nand: mxc: fix obiwan error in mxc_nand_v[12]_ooblayout_free() functions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit a894cf6c5a82 ("mtd: nand: mxc: switch to mtd_ooblayout_ops") introduced a regression accessing the OOB area from the mxc_nand driver due to an Obiwan error in the mxc_nand_v[12]_ooblayout_free() functions. They report a bogus oobregion { 64, 7 } which leads to errors accessing bogus data when reading the oob area. Prior to the commit the mtd-oobtest module could be run without any errors. With the offending commit, this test fails with results like: |Running mtd-oobtest | |================================================= |mtd_oobtest: MTD device: 5 |mtd_oobtest: MTD device size 524288, eraseblock size 131072, page size 2048, count of eraseblocks 4, pages per eraseblock 64, OOB size 64 |mtd_test: scanning for bad eraseblocks |mtd_test: scanned 4 eraseblocks, 0 are bad |mtd_oobtest: test 1 of 5 |mtd_oobtest: writing OOBs of whole device |mtd_oobtest: written up to eraseblock 0 |mtd_oobtest: written 4 eraseblocks |mtd_oobtest: verifying all eraseblocks |mtd_oobtest: error @addr[0x0:0x19] 0x9a -> 0x78 diff 0xe2 |mtd_oobtest: error @addr[0x0:0x1a] 0xcc -> 0x0 diff 0xcc |mtd_oobtest: error @addr[0x0:0x1b] 0xe0 -> 0x85 diff 0x65 |mtd_oobtest: error @addr[0x0:0x1c] 0x60 -> 0x62 diff 0x2 |mtd_oobtest: error @addr[0x0:0x1d] 0x69 -> 0x45 diff 0x2c |mtd_oobtest: error @addr[0x0:0x1e] 0xcd -> 0xa0 diff 0x6d |mtd_oobtest: error @addr[0x0:0x1f] 0xf2 -> 0x60 diff 0x92 |mtd_oobtest: error: verify failed at 0x0 [...] Signed-off-by: Lothar Waßmann Fixes: a894cf6c5a82 ("mtd: nand: mxc: switch to mtd_ooblayout_ops") Cc: Signed-off-by: Boris Brezillon --- drivers/mtd/nand/mxc_nand.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 5173fadc9a4e..57cbe2b83849 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -943,7 +943,7 @@ static int mxc_v2_ooblayout_free(struct mtd_info *mtd, int section, struct nand_chip *nand_chip = mtd_to_nand(mtd); int stepsize = nand_chip->ecc.bytes == 9 ? 16 : 26; - if (section > nand_chip->ecc.steps) + if (section >= nand_chip->ecc.steps) return -ERANGE; if (!section) { -- cgit v1.2.3