From 7f61dff1ed915c44845d6865d295853b1c39b6d7 Mon Sep 17 00:00:00 2001 From: Marian-Cristian Rotariu Date: Tue, 3 Mar 2020 12:44:50 +0000 Subject: ARM: dts: iwg22d-sodimm: Enable LCD panel On the Generic SODIMM Development Platform there is an RGB LCD panel directly connected to the DU output. It uses the TPU0 as backlight, one GPIO pull-up configuration for power enable, R[2:7], G[2:7], B[2:7], VSYNC, HSYNC, DU0_DISP and, DU0_CLK as inputs. There is no encoder between the DU and the panel, therefore the default connector driver is used. The two variants of the iW-G22D should be mutually exclusive, therefore this patch also disables the RGB LCD display when the HDMI extension board is used. Signed-off-by: Marian-Cristian Rotariu Link: https://lore.kernel.org/r/1583239490-8837-1-git-send-email-marian-cristian.rotariu.rb@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- .../arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts | 6 +++ arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts | 60 ++++++++++++++++++++++ 2 files changed, 66 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts index 2aeebfc9e4f1..92aa26ba423c 100644 --- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts +++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts @@ -108,6 +108,12 @@ }; }; +&lcd_panel { + status = "disabled"; + + /delete-node/ port; +}; + &pfc { can1_pins: can1 { groups = "can1_data_b"; diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts index 58d369ad8279..2487ba0e9c9f 100644 --- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts +++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts @@ -30,6 +30,7 @@ /dts-v1/; #include "r8a7745-iwg22m.dtsi" +#include / { model = "iWave Systems RainboW-G22D-SODIMM board based on RZ/G1E"; @@ -78,6 +79,49 @@ gpios-states = <1>; states = <3300000 1>, <1800000 0>; }; + + vccq_panel: regulator-vccq-panel { + compatible = "regulator-fixed"; + regulator-name = "Panel VccQ"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 13 GPIO_ACTIVE_LOW>; + enable-active-high; + }; + + backlight_lcd: backlight { + compatible = "pwm-backlight"; + pwms = <&tpu 3 5000000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + }; + + lcd_panel: lcd { + compatible = "edt,etm043080dh6gp"; + power-supply = <&vccq_panel>; + backlight = <&backlight_lcd>; + + port { + lcd_in: endpoint { + remote-endpoint = <&du_out_rgb0>; + }; + }; + }; +}; + +&du { + pinctrl-0 = <&du0_pins>; + pinctrl-names = "default"; + + status = "okay"; + + ports { + port@0 { + endpoint { + remote-endpoint = <&lcd_in>; + }; + }; + }; }; &avb { @@ -149,11 +193,21 @@ function = "avb"; }; + backlight_pins: backlight { + groups = "tpu_to3_c"; + function = "tpu"; + }; + can0_pins: can0 { groups = "can0_data"; function = "can0"; }; + du0_pins: du0 { + groups = "du0_rgb666", "du0_sync", "du0_disp", "du0_clk0_out"; + function = "du0"; + }; + hscif1_pins: hscif1 { groups = "hscif1_data", "hscif1_ctrl"; function = "hscif1"; @@ -229,6 +283,12 @@ shared-pin; }; +&tpu { + pinctrl-0 = <&backlight_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + &usbphy { status = "okay"; }; -- cgit v1.2.3 From 99ae78f1fc3a73c88fe726c676ae963ce722bf20 Mon Sep 17 00:00:00 2001 From: Marian-Cristian Rotariu Date: Wed, 4 Mar 2020 15:44:10 +0000 Subject: ARM: dts: iwg22d-sodimm: Enable touchscreen In one of the iWave-G22D development board variants, called Generic SODIMM Development Platform, we have an LCD with touchscreen. The resistive touch controller, STMPE811 is on the development board and is connected through the i2c5 of the RZ-G1E. Additionally, this controller should generate an interrupt to the CPU and it is connected through GPIO4,4 to the GIC. Touch was tested with one of our iW-RainboW-G22D-SODIMM RZ/G1E development platforms. More details on the iWave website: https://www.iwavesystems.com/rz-g1e-sodimm-development-kit.html Signed-off-by: Marian-Cristian Rotariu Link: https://lore.kernel.org/r/1583336650-25848-1-git-send-email-marian-cristian.rotariu.rb@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts | 33 +++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts index 2487ba0e9c9f..b15b1b088a32 100644 --- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts +++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts @@ -171,6 +171,39 @@ status = "okay"; clock-frequency = <400000>; + stmpe811@44 { + compatible = "st,stmpe811"; + reg = <0x44>; + interrupt-parent = <&gpio4>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + + stmpe_touchscreen { + compatible = "st,stmpe-ts"; + /* 8 sample average control */ + st,ave-ctrl = <3>; + /* 7 length fractional part in z */ + st,fraction-z = <7>; + /* + * 50 mA typical 80 mA max touchscreen drivers + * current limit value + */ + st,i-drive = <1>; + /* 1 ms panel driver settling time */ + st,settling = <3>; + /* 5 ms touch detect interrupt delay */ + st,touch-det-delay = <5>; + }; + }; + sgtl5000: codec@a { compatible = "fsl,sgtl5000"; #sound-dai-cells = <0>; -- cgit v1.2.3