| Age | Commit message (Collapse) | Author |
|---|
|
When more than 255 elements expired we're supposed to switch to a new gc
container structure.
This never happens: u8 type will wrap before reaching the boundary
and nft_trans_gc_space() always returns true.
This means we recycle the initial gc container structure and
lose track of the elements that came before.
While at it, don't deref 'gc' after we've passed it to call_rcu.
Fixes: 5f68718b34a5 ("netfilter: nf_tables: GC transaction API to avoid race with control plane")
Reported-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Get a null-ptr-deref bug as follows with reproducer [1].
BUG: kernel NULL pointer dereference, address: 0000000000000228
...
RIP: 0010:vlan_dev_hard_header+0x35/0x140 [8021q]
...
Call Trace:
<TASK>
? __die+0x24/0x70
? page_fault_oops+0x82/0x150
? exc_page_fault+0x69/0x150
? asm_exc_page_fault+0x26/0x30
? vlan_dev_hard_header+0x35/0x140 [8021q]
? vlan_dev_hard_header+0x8e/0x140 [8021q]
neigh_connected_output+0xb2/0x100
ip6_finish_output2+0x1cb/0x520
? nf_hook_slow+0x43/0xc0
? ip6_mtu+0x46/0x80
ip6_finish_output+0x2a/0xb0
mld_sendpack+0x18f/0x250
mld_ifc_work+0x39/0x160
process_one_work+0x1e6/0x3f0
worker_thread+0x4d/0x2f0
? __pfx_worker_thread+0x10/0x10
kthread+0xe5/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x34/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
[1]
$ teamd -t team0 -d -c '{"runner": {"name": "loadbalance"}}'
$ ip link add name t-dummy type dummy
$ ip link add link t-dummy name t-dummy.100 type vlan id 100
$ ip link add name t-nlmon type nlmon
$ ip link set t-nlmon master team0
$ ip link set t-nlmon nomaster
$ ip link set t-dummy up
$ ip link set team0 up
$ ip link set t-dummy.100 down
$ ip link set t-dummy.100 master team0
When enslave a vlan device to team device and team device type is changed
from non-ether to ether, header_ops of team device is changed to
vlan_header_ops. That is incorrect and will trigger null-ptr-deref
for vlan->real_dev in vlan_dev_hard_header() because team device is not
a vlan device.
Cache eth_header_ops in team_setup(), then assign cached header_ops to
header_ops of team net device when its type is changed from non-ether
to ether to fix the bug.
Fixes: 1d76efe1577b ("team: add support for non-ethernet devices")
Suggested-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230918123011.1884401-1-william.xuanziyang@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Alexei Starovoitov says:
====================
The following pull-request contains BPF updates for your *net* tree.
We've added 21 non-merge commits during the last 8 day(s) which contain
a total of 21 files changed, 450 insertions(+), 36 deletions(-).
The main changes are:
1) Adjust bpf_mem_alloc buckets to match ksize(), from Hou Tao.
2) Check whether override is allowed in kprobe mult, from Jiri Olsa.
3) Fix btf_id symbol generation with ld.lld, from Jiri and Nick.
4) Fix potential deadlock when using queue and stack maps from NMI, from Toke Høiland-Jørgensen.
Please consider pulling these changes from:
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf.git
Thanks a lot!
Also thanks to reporters, reviewers and testers of commits in this pull-request:
Alan Maguire, Biju Das, Björn Töpel, Dan Carpenter, Daniel Borkmann,
Eduard Zingerman, Hsin-Wei Hung, Marcus Seyfarth, Nathan Chancellor,
Satya Durga Srinivasu Prabhala, Song Liu, Stephen Rothwell
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Marcus and Satya reported an issue where BTF_ID macro generates same
symbol in separate objects and that breaks final vmlinux link.
ld.lld: error: ld-temp.o <inline asm>:14577:1: symbol
'__BTF_ID__struct__cgroup__624' is already defined
This can be triggered under specific configs when __COUNTER__ happens to
be the same for the same symbol in two different translation units,
which is already quite unlikely to happen.
Add __LINE__ number suffix to make BTF_ID symbol more unique, which is
not a complete fix, but it would help for now and meanwhile we can work
on better solution as suggested by Andrii.
Cc: stable@vger.kernel.org
Reported-by: Satya Durga Srinivasu Prabhala <quic_satyap@quicinc.com>
Reported-by: Marcus Seyfarth <m.seyfarth@gmail.com>
Closes: https://github.com/ClangBuiltLinux/linux/issues/1913
Debugged-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/bpf/CAEf4Bzb5KQ2_LmhN769ifMeSJaWfebccUasQOfQKaOd0nQ51tw@mail.gmail.com/
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230915-bpf_collision-v3-1-263fc519c21f@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
netfilter pull request 23-09-13
====================
The following patchset contains Netfilter fixes for net:
1) Do not permit to remove rules from chain binding, otherwise
double rule release is possible, triggering UaF. This rule
deletion support does not make sense and userspace does not use
this. Problem exists since the introduction of chain binding support.
2) rbtree GC worker only collects the elements that have expired.
This operation is not destructive, therefore, turn write into
read spinlock to avoid datapath contention due to GC worker run.
This was not fixed in the recent GC fix batch in the 6.5 cycle.
3) pipapo set backend performs sync GC, therefore, catchall elements
must use sync GC queue variant. This bug was introduced in the
6.5 cycle with the recent GC fixes.
4) Stop GC run if memory allocation fails in pipapo set backend,
otherwise access to NULL pointer to GC transaction object might
occur. This bug was introduced in the 6.5 cycle with the recent
GC fixes.
5) rhash GC run uses an iterator that might hit EAGAIN to rewind,
triggering double-collection of the same element. This bug was
introduced in the 6.5 cycle with the recent GC fixes.
6) Do not permit to remove elements in anonymous sets, this type of
sets are populated once and then bound to rules. This fix is
similar to the chain binding patch coming first in this batch.
API permits since the very beginning but it has no use case from
userspace.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Quite unusually, this does not contains any fix coming from subtrees
(nf, ebpf, wifi, etc).
Current release - regressions:
- bcmasp: fix possible OOB write in bcmasp_netfilt_get_all_active()
Previous releases - regressions:
- ipv4: fix one memleak in __inet_del_ifa()
- tcp: fix bind() regressions for v4-mapped-v6 addresses.
- tls: do not free tls_rec on async operation in
bpf_exec_tx_verdict()
- dsa: fixes for SJA1105 FDB regressions
- veth: update XDP feature set when bringing up device
- igb: fix hangup when enabling SR-IOV
Previous releases - always broken:
- kcm: fix memory leak in error path of kcm_sendmsg()
- smc: fix data corruption in smcr_port_add
- microchip: fix possible memory leak for vcap_dup_rule()"
* tag 'net-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (37 commits)
kcm: Fix error handling for SOCK_DGRAM in kcm_sendmsg().
net: renesas: rswitch: Add spin lock protection for irq {un}mask
net: renesas: rswitch: Fix unmasking irq condition
igb: clean up in all error paths when enabling SR-IOV
ixgbe: fix timestamp configuration code
selftest: tcp: Add v4-mapped-v6 cases in bind_wildcard.c.
selftest: tcp: Move expected_errno into each test case in bind_wildcard.c.
selftest: tcp: Fix address length in bind_wildcard.c.
tcp: Fix bind() regression for v4-mapped-v6 non-wildcard address.
tcp: Fix bind() regression for v4-mapped-v6 wildcard address.
tcp: Factorise sk_family-independent comparison in inet_bind2_bucket_match(_addr_any).
ipv6: fix ip6_sock_set_addr_preferences() typo
veth: Update XDP feature set when bringing up device
net: macb: fix sleep inside spinlock
net/tls: do not free tls_rec on async operation in bpf_exec_tx_verdict()
net: ethernet: mtk_eth_soc: fix pse_port configuration for MT7988
net: ethernet: mtk_eth_soc: fix uninitialized variable
kcm: Fix memory leak in error path of kcm_sendmsg()
r8152: check budget for r8152_poll()
net: dsa: sja1105: block FDB accesses that are concurrent with a switch reset
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
- fix reference to exported symbols for parisc64 [Masahiro Yamada]
- Block-TLB (BTLB) support on 32-bit CPUs
- sparse and build-warning fixes
* tag 'parisc-for-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
linux/export: fix reference to exported functions for parisc64
parisc: BTLB: Initialize BTLB tables at CPU startup
parisc: firmware: Simplify calling non-PA20 functions
parisc: BTLB: _edata symbol has to be page aligned for BTLB support
parisc: BTLB: Add BTLB insert and purge firmware function wrappers
parisc: BTLB: Clear possibly existing BTLB entries
parisc: Prepare for Block-TLB support on 32-bit kernel
parisc: shmparam.h: Document aliasing requirements of PA-RISC
parisc: irq: Make irq_stack_union static to avoid sparse warning
parisc: drivers: Fix sparse warning
parisc: iosapic.c: Fix sparse warnings
parisc: ccio-dma: Fix sparse warnings
parisc: sba-iommu: Fix sparse warnigs
parisc: sba: Fix compile warning wrt list of SBA devices
parisc: sba_iommu: Fix build warning if procfs if disabled
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Add missing LOCKDOWN checks for eventfs callers
When LOCKDOWN is active for tracing, it causes inconsistent state
when some functions succeed and others fail.
- Use dput() to free the top level eventfs descriptor
There was a race between accesses and freeing it.
- Fix a long standing bug that eventfs exposed due to changing timings
by dynamically creating files. That is, If a event file is opened for
an instance, there's nothing preventing the instance from being
removed which will make accessing the files cause use-after-free
bugs.
- Fix a ring buffer race that happens when iterating over the ring
buffer while writers are active. Check to make sure not to read the
event meta data if it's beyond the end of the ring buffer sub buffer.
- Fix the print trigger that disappeared because the test to create it
was looking for the event dir field being filled, but now it has the
"ef" field filled for the eventfs structure.
- Remove the unused "dir" field from the event structure.
- Fix the order of the trace_dynamic_info as it had it backwards for
the offset and len fields for which one was for which endianess.
- Fix NULL pointer dereference with eventfs_remove_rec()
If an allocation fails in one of the eventfs_add_*() functions, the
caller of it in event_subsystem_dir() or event_create_dir() assigns
the result to the structure. But it's assigning the ERR_PTR and not
NULL. This was passed to eventfs_remove_rec() which expects either a
good pointer or a NULL, not ERR_PTR. The fix is to not assign the
ERR_PTR to the structure, but to keep it NULL on error.
- Fix list_for_each_rcu() to use list_for_each_srcu() in
dcache_dir_open_wrapper(). One iteration of the code used RCU but
because it had to call sleepable code, it had to be changed to use
SRCU, but one of the iterations was missed.
- Fix synthetic event print function to use "as_u64" instead of passing
in a pointer to the union. To fix big/little endian issues, the u64
that represented several types was turned into a union to define the
types properly.
* tag 'trace-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
eventfs: Fix the NULL pointer dereference bug in eventfs_remove_rec()
tracefs/eventfs: Use list_for_each_srcu() in dcache_dir_open_wrapper()
tracing/synthetic: Print out u64 values properly
tracing/synthetic: Fix order of struct trace_dynamic_info
selftests/ftrace: Fix dependencies for some of the synthetic event tests
tracing: Remove unused trace_event_file dir field
tracing: Use the new eventfs descriptor for print trigger
ring-buffer: Do not attempt to read past "commit"
tracefs/eventfs: Free top level files on removal
ring-buffer: Avoid softlockup in ring_buffer_resize()
tracing: Have event inject files inc the trace array ref count
tracing: Have option files inc the trace array ref count
tracing: Have current_trace inc the trace array ref count
tracing: Have tracing_max_latency inc the trace array ref count
tracing: Increase trace array ref count on enable and filter files
tracefs/eventfs: Use dput to free the toplevel events directory
tracefs/eventfs: Add missing lockdown checks
tracefs: Add missing lockdown check to tracefs_create_dir()
|
|
Andrei Vagin reported bind() regression with strace logs.
If we bind() a TCPv6 socket to ::FFFF:0.0.0.0 and then bind() a TCPv4
socket to 127.0.0.1, the 2nd bind() should fail but now succeeds.
from socket import *
s1 = socket(AF_INET6, SOCK_STREAM)
s1.bind(('::ffff:0.0.0.0', 0))
s2 = socket(AF_INET, SOCK_STREAM)
s2.bind(('127.0.0.1', s1.getsockname()[1]))
During the 2nd bind(), if tb->family is AF_INET6 and sk->sk_family is
AF_INET in inet_bind2_bucket_match_addr_any(), we still need to check
if tb has the v4-mapped-v6 wildcard address.
The example above does not work after commit 5456262d2baa ("net: Fix
incorrect address comparison when searching for a bind2 bucket"), but
the blamed change is not the commit.
Before the commit, the leading zeros of ::FFFF:0.0.0.0 were treated
as 0.0.0.0, and the sequence above worked by chance. Technically, this
case has been broken since bhash2 was introduced.
Note that if we bind() two sockets to 127.0.0.1 and then ::FFFF:0.0.0.0,
the 2nd bind() fails properly because we fall back to using bhash to
detect conflicts for the v4-mapped-v6 address.
Fixes: 28044fc1d495 ("net: Add a bhash2 table hashed by port and address")
Reported-by: Andrei Vagin <avagin@google.com>
Closes: https://lore.kernel.org/netdev/ZPuYBOFC8zsK6r9T@google.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ip6_sock_set_addr_preferences() second argument should be an integer.
SUNRPC attempts to set IPV6_PREFER_SRC_PUBLIC were
translated to IPV6_PREFER_SRC_TMP
Fixes: 18d5ad623275 ("ipv6: add ip6_sock_set_addr_preferences")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230911154213.713941-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
John David Anglin reported parisc has been broken since commit
ddb5cdbafaaa ("kbuild: generate KSYMTAB entries by modpost").
Like ia64, parisc64 uses a function descriptor. The function
references must be prefixed with P%.
Also, symbols prefixed $$ from the library have the symbol type
STT_LOPROC instead of STT_FUNC. They should be handled as functions
too.
Fixes: ddb5cdbafaaa ("kbuild: generate KSYMTAB entries by modpost")
Reported-by: John David Anglin <dave.anglin@bell.net>
Tested-by: John David Anglin <dave.anglin@bell.net>
Tested-by: Helge Deller <deller@gmx.de>
Closes: https://lore.kernel.org/linux-parisc/1901598a-e11d-f7dd-a5d9-9a69d06e6b6e@bell.net/T/#u
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
To make handling BIG and LITTLE endian better the offset/len of dynamic
fields of the synthetic events was changed into a structure of:
struct trace_dynamic_info {
#ifdef CONFIG_CPU_BIG_ENDIAN
u16 offset;
u16 len;
#else
u16 len;
u16 offset;
#endif
};
to replace the manual changes of:
data_offset = offset & 0xffff;
data_offest = len << 16;
But if you look closely, the above is:
<len> << 16 | offset
Which in little endian would be in memory:
offset_lo offset_hi len_lo len_hi
and in big endian:
len_hi len_lo offset_hi offset_lo
Which if broken into a structure would be:
struct trace_dynamic_info {
#ifdef CONFIG_CPU_BIG_ENDIAN
u16 len;
u16 offset;
#else
u16 offset;
u16 len;
#endif
};
Which is the opposite of what was defined.
Fix this and just to be safe also add "__packed".
Link: https://lore.kernel.org/all/20230908154417.5172e343@gandalf.local.home/
Link: https://lore.kernel.org/linux-trace-kernel/20230908163929.2c25f3dc@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Tested-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Fixes: ddeea494a16f3 ("tracing/synthetic: Use union instead of casts")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Commit 151e887d8ff9 ("veth: Fixing transmit return status for dropped
packets") exposed the fact that bpf_clone_redirect is capable of
returning raw NET_XMIT_XXX return codes.
This is in the conflict with its UAPI doc which says the following:
"0 on success, or a negative error in case of failure."
Update the UAPI to reflect the fact that bpf_clone_redirect can
return positive error numbers, but don't explicitly define
their meaning.
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230911194731.286342-1-sdf@google.com
|
|
git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- six smb3 client fixes including ones to allow controlling smb3
directory caching timeout and limits, and one debugging improvement
- one fix for nls Kconfig (don't need to expose NLS_UCS2_UTILS option)
- one minor spnego registry update
* tag '6.6-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
spnego: add missing OID to oid registry
smb3: fix minor typo in SMB2_GLOBAL_CAP_LARGE_MTU
cifs: update internal module version number for cifs.ko
smb3: allow controlling maximum number of cached directories
smb3: add trace point for queryfs (statfs)
nls: Hide new NLS_UCS2_UTILS
smb3: allow controlling length of time directory entries are cached with dir leases
smb: propagate error code of extract_sharename()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- The kernel now dynamically probes for misaligned access speed, as
opposed to relying on a table of known implementations.
- Support for non-coherent devices on systems using the Andes AX45MP
core, including the RZ/Five SoCs.
- Support for the V extension in ptrace(), again.
- Support for KASLR.
- Support for the BPF prog pack allocator in RISC-V.
- A handful of bug fixes and cleanups.
* tag 'riscv-for-linus-6.6-mw2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (25 commits)
soc: renesas: Kconfig: For ARCH_R9A07G043 select the required configs if dependencies are met
riscv: Kconfig.errata: Add dependency for RISCV_SBI in ERRATA_ANDES config
riscv: Kconfig.errata: Drop dependency for MMU in ERRATA_ANDES_CMO config
riscv: Kconfig: Select DMA_DIRECT_REMAP only if MMU is enabled
bpf, riscv: use prog pack allocator in the BPF JIT
riscv: implement a memset like function for text
riscv: extend patch_text_nosync() for multiple pages
bpf: make bpf_prog_pack allocator portable
riscv: libstub: Implement KASLR by using generic functions
libstub: Fix compilation warning for rv32
arm64: libstub: Move KASLR handling functions to kaslr.c
riscv: Dump out kernel offset information on panic
riscv: Introduce virtual kernel mapping KASLR
RISC-V: Add ptrace support for vectors
soc: renesas: Kconfig: Select the required configs for RZ/Five SoC
cache: Add L2 cache management for Andes AX45MP RISC-V core
dt-bindings: cache: andestech,ax45mp-cache: Add DT binding documentation for L2 cache controller
riscv: mm: dma-noncoherent: nonstandard cache operations support
riscv: errata: Add Andes alternative ports
riscv: asm: vendorid_list: Add Andes Technology to the vendors list
...
|
|
Pull more SCSI updates from James Bottomley:
"Mostly small stragglers that missed the initial merge.
Driver updates are qla2xxx and smartpqi (mp3sas has a high diffstat
due to the volatile qualifier removal, fnic due to unused function
removal and sd.c has a lot of code shuffling to remove forward
declarations)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (38 commits)
scsi: ufs: core: No need to update UPIU.header.flags and lun in advanced RPMB handler
scsi: ufs: core: Add advanced RPMB support where UFSHCI 4.0 does not support EHS length in UTRD
scsi: mpt3sas: Remove volatile qualifier
scsi: mpt3sas: Perform additional retries if doorbell read returns 0
scsi: libsas: Simplify sas_queue_reset() and remove unused code
scsi: ufs: Fix the build for the old ARM OABI
scsi: qla2xxx: Fix unused variable warning in qla2xxx_process_purls_pkt()
scsi: fnic: Remove unused functions fnic_scsi_host_start/end_tag()
scsi: qla2xxx: Fix spelling mistake "tranport" -> "transport"
scsi: fnic: Replace sgreset tag with max_tag_id
scsi: qla2xxx: Remove unused variables in qla24xx_build_scsi_type_6_iocbs()
scsi: qla2xxx: Fix nvme_fc_rcv_ls_req() undefined error
scsi: smartpqi: Change driver version to 2.1.24-046
scsi: smartpqi: Enhance error messages
scsi: smartpqi: Enhance controller offline notification
scsi: smartpqi: Enhance shutdown notification
scsi: smartpqi: Simplify lun_number assignment
scsi: smartpqi: Rename pciinfo to pci_info
scsi: smartpqi: Rename MACRO to clarify purpose
scsi: smartpqi: Add abort handler
...
|
|
Add missing OID to the registry. Some servers and clients (including
Windows) now request "NEGOEX - SPNEGEO Extended Negotiation Security")
See https://datatracker.ietf.org/doc/html/draft-zhu-negoex-02
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Pull xarray fixes from Matthew Wilcox:
- Fix a bug encountered by people using bittorrent where they'd get
NULL pointer dereferences on page cache lookups when using XFS
- Two documentation fixes
* tag 'xarray-6.6' of git://git.infradead.org/users/willy/xarray:
idr: fix param name in idr_alloc_cyclic() doc
xarray: Document necessary flag in alloc functions
XArray: Do not return sibling entries from xa_load()
|
|
Now that eventfs structure is used to create the events directory via the
eventfs dynamically allocate code, the "dir" field of the trace_event_file
structure is no longer used. Remove it.
Link: https://lkml.kernel.org/r/20230908022001.580400115@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ajay Kaher <akaher@vmware.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"Eliminate an obsolete thermal zone registration function"
* tag 'thermal-6.6-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Drop thermal_zone_device_register()
thermal: Use thermal_tripless_zone_device_register()
thermal: core: Add function for registering tripless thermal zones
thermal: core: Clean up headers of thermal zone registration functions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of fixes for 6.6-rc1. All small and easy ones.
- The corrections of the previous PCM iov_iter transitions
- Regression fixes in MIDI 2.0 / USB changes
- Various ASoC codec fixes for Cirrus, Realtek, WCD
- ASoC AMD quirks and ASoC Intel AVS driver workaround"
* tag 'sound-fix-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits)
ALSA: hda/realtek - ALC287 I2S speaker platform support
ASoC: amd: yc: Fix a non-functional mic on Lenovo 82TL
ASoC: Intel: avs: Provide support for fallback topology
ALSA: seq: Fix snd_seq_expand_var_event() call to user-space
ALSA: usb-audio: Fix potential memory leaks at error path for UMP open
ALSA: hda/cirrus: Fix broken audio on hardware with two CS42L42 codecs.
ASoC: rt5645: NULL pointer access when removing jack
ASoC: amd: yc: Add DMI entries to support Victus by HP Gaming Laptop 15-fb0xxx (8A3E)
MAINTAINERS: Update the MAINTAINERS enties for TEXAS INSTRUMENTS ASoC DRIVERS
ALSA: sb: Fix wrong argument in commented code
ALSA: pcm: Fix error checks of default read/write copy ops
ASoC: Name iov_iter argument as iterator instead of buffer
ASoC: dmaengine: Drop unused iov_iter for process callback
ALSA: hda/tas2781: Use standard clamp() macro
ASoC: cs35l56: Waiting for firmware to boot must be tolerant of I/O errors
ASoC: dt-bindings: fsl_easrc: Add support for imx8mp-easrc
ASoC: cs42l43: Fix missing error code in cs42l43_codec_probe()
ASoC: cs35l45: Rename DACPCM1 Source control
ASoC: cs35l45: Fix "Dead assigment" warning
ASoC: cs35l45: Add support for Chip ID 0x35A460
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Allow usage of LSX/LASX in the kernel, and use them for
SIMD-optimized RAID5/RAID6 routines
- Add Loongson Binary Translation (LBT) extension support
- Add basic KGDB & KDB support
- Add building with kcov coverage
- Add KFENCE (Kernel Electric-Fence) support
- Add KASAN (Kernel Address Sanitizer) support
- Some bug fixes and other small changes
- Update the default config file
* tag 'loongarch-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (25 commits)
LoongArch: Update Loongson-3 default config file
LoongArch: Add KASAN (Kernel Address Sanitizer) support
LoongArch: Simplify the processing of jumping new kernel for KASLR
kasan: Add (pmd|pud)_init for LoongArch zero_(pud|p4d)_populate process
kasan: Add __HAVE_ARCH_SHADOW_MAP to support arch specific mapping
LoongArch: Add KFENCE (Kernel Electric-Fence) support
LoongArch: Get partial stack information when providing regs parameter
LoongArch: mm: Add page table mapped mode support for virt_to_page()
kfence: Defer the assignment of the local variable addr
LoongArch: Allow building with kcov coverage
LoongArch: Provide kaslr_offset() to get kernel offset
LoongArch: Add basic KGDB & KDB support
LoongArch: Add Loongson Binary Translation (LBT) extension support
raid6: Add LoongArch SIMD recovery implementation
raid6: Add LoongArch SIMD syndrome calculation
LoongArch: Add SIMD-optimized XOR routines
LoongArch: Allow usage of LSX/LASX in the kernel
LoongArch: Define symbol 'fault' as a local label in fpu.S
LoongArch: Adjust {copy, clear}_user exception handler behavior
LoongArch: Use static defined zero page rather than allocated
...
|
|
This resurrects the vector ptrace() support that was removed for 6.5 due
to some bugs cropping up as part of the GDB review process.
* b4-shazam-merge:
RISC-V: Add ptrace support for vectors
Link: https://lore.kernel.org/r/20230825050248.32681-1-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking updates from Jakub Kicinski:
"Including fixes from netfilter and bpf.
Current release - regressions:
- eth: stmmac: fix failure to probe without MAC interface specified
Current release - new code bugs:
- docs: netlink: fix missing classic_netlink doc reference
Previous releases - regressions:
- deal with integer overflows in kmalloc_reserve()
- use sk_forward_alloc_get() in sk_get_meminfo()
- bpf_sk_storage: fix the missing uncharge in sk_omem_alloc
- fib: avoid warn splat in flow dissector after packet mangling
- skb_segment: call zero copy functions before using skbuff frags
- eth: sfc: check for zero length in EF10 RX prefix
Previous releases - always broken:
- af_unix: fix msg_controllen test in scm_pidfd_recv() for
MSG_CMSG_COMPAT
- xsk: fix xsk_build_skb() dereferencing possible ERR_PTR()
- netfilter:
- nft_exthdr: fix non-linear header modification
- xt_u32, xt_sctp: validate user space input
- nftables: exthdr: fix 4-byte stack OOB write
- nfnetlink_osf: avoid OOB read
- one more fix for the garbage collection work from last release
- igmp: limit igmpv3_newpack() packet size to IP_MAX_MTU
- bpf, sockmap: fix preempt_rt splat when using raw_spin_lock_t
- handshake: fix null-deref in handshake_nl_done_doit()
- ip: ignore dst hint for multipath routes to ensure packets are
hashed across the nexthops
- phy: micrel:
- correct bit assignments for cable test errata
- disable EEE according to the KSZ9477 errata
Misc:
- docs/bpf: document compile-once-run-everywhere (CO-RE) relocations
- Revert "net: macsec: preserve ingress frame ordering", it appears
to have been developed against an older kernel, problem doesn't
exist upstream"
* tag 'net-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (95 commits)
net: enetc: distinguish error from valid pointers in enetc_fixup_clear_rss_rfs()
Revert "net: team: do not use dynamic lockdep key"
net: hns3: remove GSO partial feature bit
net: hns3: fix the port information display when sfp is absent
net: hns3: fix invalid mutex between tc qdisc and dcb ets command issue
net: hns3: fix debugfs concurrency issue between kfree buffer and read
net: hns3: fix byte order conversion issue in hclge_dbg_fd_tcam_read()
net: hns3: Support query tx timeout threshold by debugfs
net: hns3: fix tx timeout issue
net: phy: Provide Module 4 KSZ9477 errata (DS80000754C)
netfilter: nf_tables: Unbreak audit log reset
netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c
netfilter: nft_set_rbtree: skip sync GC for new elements in this transaction
netfilter: nf_tables: uapi: Describe NFTA_RULE_CHAIN_ID
netfilter: nfnetlink_osf: avoid OOB read
netfilter: nftables: exthdr: fix 4-byte stack OOB write
selftests/bpf: Check bpf_sk_storage has uncharged sk_omem_alloc
bpf: bpf_sk_storage: Fix the missing uncharge in sk_omem_alloc
bpf: bpf_sk_storage: Fix invalid wait context lockdep report
s390/bpf: Pass through tail call counter in trampolines
...
|
|
pipapo needs to enqueue GC transactions for catchall elements through
nft_trans_gc_queue_sync(). Add nft_trans_gc_catchall_sync() and
nft_trans_gc_catchall_async() to handle GC transaction queueing
accordingly.
Fixes: 5f68718b34a5 ("netfilter: nf_tables: GC transaction API to avoid race with control plane")
Fixes: f6c383b8c31a ("netfilter: nf_tables: adapt set backend to use GC transaction API")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull more devicetree updates from Rob Herring:
"A couple of conversions which didn't get picked up by the subsystems
and one fix:
- Convert st,stih407-irq-syscfg and Omnivision OV7251 bindings to DT
schema
- Merge Omnivision OV5695 into OV5693 binding
- Fix of_overlay_fdt_apply prototype when !CONFIG_OF_OVERLAY"
* tag 'devicetree-fixes-for-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: irqchip: convert st,stih407-irq-syscfg to DT schema
media: dt-bindings: Convert Omnivision OV7251 to DT schema
media: dt-bindings: Merge OV5695 into OV5693 binding
of: overlay: Fix of_overlay_fdt_apply prototype when !CONFIG_OF_OVERLAY
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"Various cleanups and fixes across the board"
* tag 'pwm/for-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (31 commits)
pwm: lpc32xx: Remove handling of PWM channels
pwm: atmel: Simplify using devm functions
dt-bindings: pwm: brcm,kona-pwm: convert to YAML
pwm: stmpe: Handle errors when disabling the signal
pwm: stm32: Simplify using devm_pwmchip_add()
pwm: stm32: Don't modify HW state in .remove() callback
pwm: Fix order of freeing resources in pwmchip_remove()
pwm: ntxec: Use device_set_of_node_from_dev()
pwm: ntxec: Drop a write-only variable from driver data
pwm: pxa: Don't reimplement of_device_get_match_data()
pwm: lpc18xx-sct: Simplify using devm_clk_get_enabled()
pwm: atmel-tcb: Don't track polarity in driver data
pwm: atmel-tcb: Unroll atmel_tcb_pwm_set_polarity() into only caller
pwm: atmel-tcb: Put per-channel data into driver data
pwm: atmel-tcb: Fix resource freeing in error path and remove
pwm: atmel-tcb: Harmonize resource allocation order
pwm: Drop unused #include <linux/radix-tree.h>
pwm: rz-mtu3: Fix build warning 'num_channel_ios' not described
pwm: Remove outdated documentation for pwmchip_remove()
pwm: atmel: Enable clk when pwm already enabled in bootloader
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- Add a way for drivers to tell the core the supported alarm range is
smaller than the date range. This is not used yet but will be
useful for the alarmtimers in the next release.
- fix Wvoid-pointer-to-enum-cast warnings
- remove redundant of_match_ptr()
- stop warning for invalid alarms when the alarm is disabled
Drivers:
- isl12022: allow setting the trip level for battery level detection
- pcf2127: add support for PCF2131 and multiple timestamps
- stm32: time precision improvement, many fixes
- twl: NVRAM support"
* tag 'rtc-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (73 commits)
dt-bindings: rtc: ds3231: Remove text binding
rtc: wm8350: remove unnecessary messages
rtc: twl: remove unnecessary messages
rtc: sun6i: remove unnecessary message
rtc: stop warning for invalid alarms when the alarm is disabled
rtc: twl: add NVRAM support
rtc: pcf85363: Allow to wake up system without IRQ
rtc: m48t86: add DT support for m48t86
dt-bindings: rtc: Add ST M48T86
rtc: pcf2127: remove useless check
rtc: rzn1: Report maximum alarm limit to rtc core
rtc: ds1305: Report maximum alarm limit to rtc core
rtc: tps6586x: Report maximum alarm limit to rtc core
rtc: cmos: Report supported alarm limit to rtc infrastructure
rtc: cros-ec: Detect and report supported alarm window size
rtc: Add support for limited alarm timer offsets
rtc: isl1208: Fix incorrect logic in isl1208_set_xtoscb()
MAINTAINERS: remove obsolete pattern in RTC SUBSYSTEM section
rtc: tps65910: Remove redundant dev_warn() and do not check for 0 return after calling platform_get_irq()
rtc: omap: Do not check for 0 return after calling platform_get_irq()
...
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Clean up vCPU targets, always returning generic v8 as the preferred
target
- Trap forwarding infrastructure for nested virtualization (used for
traps that are taken from an L2 guest and are needed by the L1
hypervisor)
- FEAT_TLBIRANGE support to only invalidate specific ranges of
addresses when collapsing a table PTE to a block PTE. This avoids
that the guest refills the TLBs again for addresses that aren't
covered by the table PTE.
- Fix vPMU issues related to handling of PMUver.
- Don't unnecessary align non-stack allocations in the EL2 VA space
- Drop HCR_VIRT_EXCP_MASK, which was never used...
- Don't use smp_processor_id() in kvm_arch_vcpu_load(), but the cpu
parameter instead
- Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort()
- Remove prototypes without implementations
RISC-V:
- Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for guest
- Added ONE_REG interface for SATP mode
- Added ONE_REG interface to enable/disable multiple ISA extensions
- Improved error codes returned by ONE_REG interfaces
- Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V
- Added get-reg-list selftest for KVM RISC-V
s390:
- PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)
Allows a PV guest to use crypto cards. Card access is governed by
the firmware and once a crypto queue is "bound" to a PV VM every
other entity (PV or not) looses access until it is not bound
anymore. Enablement is done via flags when creating the PV VM.
- Guest debug fixes (Ilya)
x86:
- Clean up KVM's handling of Intel architectural events
- Intel bugfixes
- Add support for SEV-ES DebugSwap, allowing SEV-ES guests to use
debug registers and generate/handle #DBs
- Clean up LBR virtualization code
- Fix a bug where KVM fails to set the target pCPU during an IRTE
update
- Fix fatal bugs in SEV-ES intrahost migration
- Fix a bug where the recent (architecturally correct) change to
reinject #BP and skip INT3 broke SEV guests (can't decode INT3 to
skip it)
- Retry APIC map recalculation if a vCPU is added/enabled
- Overhaul emergency reboot code to bring SVM up to par with VMX, tie
the "emergency disabling" behavior to KVM actually being loaded,
and move all of the logic within KVM
- Fix user triggerable WARNs in SVM where KVM incorrectly assumes the
TSC ratio MSR cannot diverge from the default when TSC scaling is
disabled up related code
- Add a framework to allow "caching" feature flags so that KVM can
check if the guest can use a feature without needing to search
guest CPUID
- Rip out the ancient MMU_DEBUG crud and replace the useful bits with
CONFIG_KVM_PROVE_MMU
- Fix KVM's handling of !visible guest roots to avoid premature
triple fault injection
- Overhaul KVM's page-track APIs, and KVMGT's usage, to reduce the
API surface that is needed by external users (currently only
KVMGT), and fix a variety of issues in the process
Generic:
- Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier
events to pass action specific data without needing to constantly
update the main handlers.
- Drop unused function declarations
Selftests:
- Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs
- Add support for printf() in guest code and covert all guest asserts
to use printf-based reporting
- Clean up the PMU event filter test and add new testcases
- Include x86 selftests in the KVM x86 MAINTAINERS entry"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (279 commits)
KVM: x86/mmu: Include mmu.h in spte.h
KVM: x86/mmu: Use dummy root, backed by zero page, for !visible guest roots
KVM: x86/mmu: Disallow guest from using !visible slots for page tables
KVM: x86/mmu: Harden TDP MMU iteration against root w/o shadow page
KVM: x86/mmu: Harden new PGD against roots without shadow pages
KVM: x86/mmu: Add helper to convert root hpa to shadow page
drm/i915/gvt: Drop final dependencies on KVM internal details
KVM: x86/mmu: Handle KVM bookkeeping in page-track APIs, not callers
KVM: x86/mmu: Drop @slot param from exported/external page-track APIs
KVM: x86/mmu: Bug the VM if write-tracking is used but not enabled
KVM: x86/mmu: Assert that correct locks are held for page write-tracking
KVM: x86/mmu: Rename page-track APIs to reflect the new reality
KVM: x86/mmu: Drop infrastructure for multiple page-track modes
KVM: x86/mmu: Use page-track notifiers iff there are external users
KVM: x86/mmu: Move KVM-only page-track declarations to internal header
KVM: x86: Remove the unused page-track hook track_flush_slot()
drm/i915/gvt: switch from ->track_flush_slot() to ->track_remove_region()
KVM: x86: Add a new page-track hook to handle memslot deletion
drm/i915/gvt: Don't bother removing write-protection on to-be-deleted slot
KVM: x86: Reject memslot MOVE operations if KVMGT is attached
...
|
|
This reverts commit 39285e124edbc752331e98ace37cc141a6a3747a.
Looks like the change has unintended consequences in exposing
objects before they are initialized. Let's drop this patch
and try again in net-next.
Reported-by: syzbot+44ae022028805f4600fc@syzkaller.appspotmail.com
Fixes: 39285e124edb ("net: team: do not use dynamic lockdep key")
Link: https://lore.kernel.org/all/20230907103124.6adb7256@kernel.org/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter updates for net
This PR contains nf_tables updates for your *net* tree.
This time almost all fixes are for old bugs:
First patch fixes a 4-byte stack OOB write, from myself.
This was broken ever since nftables was switches from 128 to 32bit
register addressing in v4.1.
2nd patch fixes an out-of-bounds read.
This has been broken ever since xt_osf got added in 2.6.31, the bug
was then just moved around during refactoring, from Wander Lairson Costa.
3rd patch adds a missing enum description, from Phil Sutter.
4th patch fixes a UaF inftables that occurs when userspace adds
elements with a timeout so small that expiration happens while the
transaction is still in progress. Fix from Pablo Neira Ayuso.
Patch 5 fixes a memory out of bounds access, this was
broken since v4.20. Patch from Kyle Zeng and Jozsef Kadlecsik.
Patch 6 fixes another bogus memory access when building audit
record. Bug added in the previous pull request, fix from Pablo.
netfilter pull request 2023-09-06
* tag 'nf-23-09-06' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: Unbreak audit log reset
netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c
netfilter: nft_set_rbtree: skip sync GC for new elements in this transaction
netfilter: nf_tables: uapi: Describe NFTA_RULE_CHAIN_ID
netfilter: nfnetlink_osf: avoid OOB read
netfilter: nftables: exthdr: fix 4-byte stack OOB write
====================
Link: https://lore.kernel.org/r/20230906162525.11079-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The KSZ9477 errata points out (in 'Module 4') the link up/down problems
when EEE (Energy Efficient Ethernet) is enabled in the device to which
the KSZ9477 tries to auto negotiate.
The suggested workaround is to clear advertisement of EEE for PHYs in
this chip driver.
To avoid regressions with other switch ICs the new MICREL_NO_EEE flag
has been introduced.
Moreover, the in-register disablement of MMD_DEVICE_ID_EEE_ADV.MMD_EEE_ADV
MMD register is removed, as this code is both; now executed too late
(after previous rework of the PHY and DSA for KSZ switches) and not
required as setting all members of eee_broken_modes bit field prevents
the KSZ9477 from advertising EEE.
Fixes: 69d3b36ca045 ("net: dsa: microchip: enable EEE support") # for KSZ9477
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # Confirmed disabled EEE with oscilloscope.
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230905093315.784052-1-lukma@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull ceph updates from Ilya Dryomov:
"Mixed with some fixes and cleanups, this brings in reasonably complete
fscrypt support to CephFS! The list of things which don't work with
encryption should be fairly short, mostly around the edges: fallocate
(not supported well in CephFS to begin with), copy_file_range
(requires re-encryption), non-default striping patterns.
This was a multi-year effort principally by Jeff Layton with
assistance from Xiubo Li, Luís Henriques and others, including several
dependant changes in the MDS, netfs helper library and fscrypt
framework itself"
* tag 'ceph-for-6.6-rc1' of https://github.com/ceph/ceph-client: (53 commits)
ceph: make num_fwd and num_retry to __u32
ceph: make members in struct ceph_mds_request_args_ext a union
rbd: use list_for_each_entry() helper
libceph: do not include crypto/algapi.h
ceph: switch ceph_lookup/atomic_open() to use new fscrypt helper
ceph: fix updating i_truncate_pagecache_size for fscrypt
ceph: wait for OSD requests' callbacks to finish when unmounting
ceph: drop messages from MDS when unmounting
ceph: update documentation regarding snapshot naming limitations
ceph: prevent snapshot creation in encrypted locked directories
ceph: add support for encrypted snapshot names
ceph: invalidate pages when doing direct/sync writes
ceph: plumb in decryption during reads
ceph: add encryption support to writepage and writepages
ceph: add read/modify/write to ceph_sync_write
ceph: align data in pages in ceph_sync_write
ceph: don't use special DIO path for encrypted inodes
ceph: add truncate size handling support for fscrypt
ceph: add object version support for sync read
libceph: allow ceph_osdc_new_request to accept a multi-op read
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a new driver for Azoteq IQS7210A/7211A/E touch controllers
- support for Azoteq IQS7222D variant added to iqs7222 driver
- support for touch keys functionality added to Melfas MMS114 driver
- new hardware IDs added to exc3000 and Goodix drivers
- xpad driver gained support for GameSir T4 Kaleid Controller
- a fix for xpad driver to properly support some third-party
controllers that need a magic packet to start properly
- a fix for psmouse driver to more reliably switch to RMI4 mode on
devices that use native RMI4/SMbus protocol
- a quirk for i8042 for TUXEDO Gemini 17 Gen1/Clevo PD70PN laptops
- multiple drivers have been updated to make use of devm and other
newer APIs such as dev_err_probe(), devm_regulator_get_enable(), and
others.
* tag 'input-for-v6.6-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (83 commits)
Input: goodix - add support for ACPI ID GDX9110
Input: rpckbd - fix the return value handle for platform_get_irq()
Input: tca6416-keypad - switch to using input core's polling features
Input: tca6416-keypad - convert to use devm_* api
Input: tca6416-keypad - fix interrupt enable disbalance
Input: tca6416-keypad - rely on I2C core to set up suspend/resume
Input: tca6416-keypad - always expect proper IRQ number in i2c client
Input: lm8323 - convert to use devm_* api
Input: lm8323 - rely on device core to create kp_disable attribute
Input: qt2160 - convert to use devm_* api
Input: qt2160 - do not hard code interrupt trigger
Input: qt2160 - switch to using threaded interrupt handler
Input: qt2160 - tweak check for i2c adapter functionality
Input: psmouse - add delay when deactivating for SMBus mode
Input: mcs-touchkey - fix uninitialized use of error in mcs_touchkey_probe()
Input: qt1070 - convert to use devm_* api
Input: mcs-touchkey - convert to use devm_* api
Input: amikbd - convert to use devm_* api
Input: lm8333 - convert to use devm_* api
Input: mms114 - add support for touch keys
...
|
|
Add a brief description to the enum's comment.
Fixes: 837830a4b439 ("netfilter: nf_tables: add NFTA_RULE_CHAIN_ID attribute")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
MIPS, LoongArch and some other architectures have many holes between
different segments and the valid address space (256T available) is
insufficient to map all these segments to kasan shadow memory with the
common formula provided by kasan core. So we need architecture specific
mapping formulas to ensure different segments are mapped individually,
and only limited space lengths of those specific segments are mapped to
shadow.
Therefore, when the incoming address is converted to a shadow, we need
to add a condition to determine whether it is valid.
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Similar to the syndrome calculation, the recovery algorithms also work
on 64 bytes at a time to align with the L1 cache line size of current
and future LoongArch cores (that we care about). Which means
unrolled-by-4 LSX and unrolled-by-2 LASX code.
The assembly is originally based on the x86 SSSE3/AVX2 ports, but
register allocation has been redone to take advantage of LSX/LASX's 32
vector registers, and instruction sequence has been optimized to suit
(e.g. LoongArch can perform per-byte srl and andi on vectors, but x86
cannot).
Performance numbers measured by instrumenting the raid6test code, on a
3A5000 system clocked at 2.5GHz:
> lasx 2data: 354.987 MiB/s
> lasx datap: 350.430 MiB/s
> lsx 2data: 340.026 MiB/s
> lsx datap: 337.318 MiB/s
> intx1 2data: 164.280 MiB/s
> intx1 datap: 187.966 MiB/s
Because recovery algorithms are chosen solely based on priority and
availability, lasx is marked as priority 2 and lsx priority 1. At least
for the current generation of LoongArch micro-architectures, LASX should
always be faster than LSX whenever supported, and have similar power
consumption characteristics (because the only known LASX-capable uarch,
the LA464, always compute the full 256-bit result for vector ops).
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The algorithms work on 64 bytes at a time, which is the L1 cache line
size of all current and future LoongArch cores (that we care about), as
confirmed by Huacai. The code is based on the generic int.uc algorithm,
unrolled 4 times for LSX and 2 times for LASX. Further unrolling does
not meaningfully improve the performance according to experiments.
Performance numbers measured during system boot on a 3A5000 @ 2.5GHz:
> raid6: lasx gen() 12726 MB/s
> raid6: lsx gen() 10001 MB/s
> raid6: int64x8 gen() 2876 MB/s
> raid6: int64x4 gen() 3867 MB/s
> raid6: int64x2 gen() 2531 MB/s
> raid6: int64x1 gen() 1945 MB/s
Comparison of xor() speeds (from different boots but meaningful anyway):
> lasx: 11226 MB/s
> lsx: 6395 MB/s
> int64x4: 2147 MB/s
Performance as measured by raid6test:
> raid6: lasx gen() 25109 MB/s
> raid6: lsx gen() 13233 MB/s
> raid6: int64x8 gen() 4164 MB/s
> raid6: int64x4 gen() 6005 MB/s
> raid6: int64x2 gen() 5781 MB/s
> raid6: int64x1 gen() 4119 MB/s
> raid6: using algorithm lasx gen() 25109 MB/s
> raid6: .... xor() 14439 MB/s, rmw enabled
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
sphinx complains about the use of "%PHYLINK_PCS_NEG_*":
Documentation/networking/kapi:144: ./include/linux/phylink.h:601: WARNING: Inline literal start-string without end-string.
Documentation/networking/kapi:144: ./include/linux/phylink.h:633: WARNING: Inline literal start-string without end-string.
These are not valid symbols so drop the '%' prefix.
Alternatively we could use %PHYLINK_PCS_NEG_\* (escape the *)
or use normal literal ``PHYLINK_PCS_NEG_*`` but there is already
a handful of un-adorned DEFINE_* in this file.
Fixes: f99d471afa03 ("net: phylink: add PCS negotiation mode")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/all/20230626162908.2f149f98@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot/KCSAN reported data-races in iptunnel_xmit_stats() [1]
This can run from multiple cpus without mutual exclusion.
Adopt SMP safe DEV_STATS_INC() to update dev->stats fields.
[1]
BUG: KCSAN: data-race in iptunnel_xmit / iptunnel_xmit
read-write to 0xffff8881353df170 of 8 bytes by task 30263 on cpu 1:
iptunnel_xmit_stats include/net/ip_tunnels.h:493 [inline]
iptunnel_xmit+0x432/0x4a0 net/ipv4/ip_tunnel_core.c:87
ip_tunnel_xmit+0x1477/0x1750 net/ipv4/ip_tunnel.c:831
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:662
__netdev_start_xmit include/linux/netdevice.h:4889 [inline]
netdev_start_xmit include/linux/netdevice.h:4903 [inline]
xmit_one net/core/dev.c:3544 [inline]
dev_hard_start_xmit+0x11b/0x3f0 net/core/dev.c:3560
__dev_queue_xmit+0xeee/0x1de0 net/core/dev.c:4340
dev_queue_xmit include/linux/netdevice.h:3082 [inline]
__bpf_tx_skb net/core/filter.c:2129 [inline]
__bpf_redirect_no_mac net/core/filter.c:2159 [inline]
__bpf_redirect+0x723/0x9c0 net/core/filter.c:2182
____bpf_clone_redirect net/core/filter.c:2453 [inline]
bpf_clone_redirect+0x16c/0x1d0 net/core/filter.c:2425
___bpf_prog_run+0xd7d/0x41e0 kernel/bpf/core.c:1954
__bpf_prog_run512+0x74/0xa0 kernel/bpf/core.c:2195
bpf_dispatcher_nop_func include/linux/bpf.h:1181 [inline]
__bpf_prog_run include/linux/filter.h:609 [inline]
bpf_prog_run include/linux/filter.h:616 [inline]
bpf_test_run+0x15d/0x3d0 net/bpf/test_run.c:423
bpf_prog_test_run_skb+0x77b/0xa00 net/bpf/test_run.c:1045
bpf_prog_test_run+0x265/0x3d0 kernel/bpf/syscall.c:3996
__sys_bpf+0x3af/0x780 kernel/bpf/syscall.c:5353
__do_sys_bpf kernel/bpf/syscall.c:5439 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5437 [inline]
__x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5437
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
read-write to 0xffff8881353df170 of 8 bytes by task 30249 on cpu 0:
iptunnel_xmit_stats include/net/ip_tunnels.h:493 [inline]
iptunnel_xmit+0x432/0x4a0 net/ipv4/ip_tunnel_core.c:87
ip_tunnel_xmit+0x1477/0x1750 net/ipv4/ip_tunnel.c:831
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:662
__netdev_start_xmit include/linux/netdevice.h:4889 [inline]
netdev_start_xmit include/linux/netdevice.h:4903 [inline]
xmit_one net/core/dev.c:3544 [inline]
dev_hard_start_xmit+0x11b/0x3f0 net/core/dev.c:3560
__dev_queue_xmit+0xeee/0x1de0 net/core/dev.c:4340
dev_queue_xmit include/linux/netdevice.h:3082 [inline]
__bpf_tx_skb net/core/filter.c:2129 [inline]
__bpf_redirect_no_mac net/core/filter.c:2159 [inline]
__bpf_redirect+0x723/0x9c0 net/core/filter.c:2182
____bpf_clone_redirect net/core/filter.c:2453 [inline]
bpf_clone_redirect+0x16c/0x1d0 net/core/filter.c:2425
___bpf_prog_run+0xd7d/0x41e0 kernel/bpf/core.c:1954
__bpf_prog_run512+0x74/0xa0 kernel/bpf/core.c:2195
bpf_dispatcher_nop_func include/linux/bpf.h:1181 [inline]
__bpf_prog_run include/linux/filter.h:609 [inline]
bpf_prog_run include/linux/filter.h:616 [inline]
bpf_test_run+0x15d/0x3d0 net/bpf/test_run.c:423
bpf_prog_test_run_skb+0x77b/0xa00 net/bpf/test_run.c:1045
bpf_prog_test_run+0x265/0x3d0 kernel/bpf/syscall.c:3996
__sys_bpf+0x3af/0x780 kernel/bpf/syscall.c:5353
__do_sys_bpf kernel/bpf/syscall.c:5439 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5437 [inline]
__x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5437
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x0000000000018830 -> 0x0000000000018831
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 30249 Comm: syz-executor.4 Not tainted 6.5.0-syzkaller-11704-g3f86ed6ec0b3 #0
Fixes: 039f50629b7f ("ip_tunnel: Move stats update to iptunnel_xmit()")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
team interface has used a dynamic lockdep key to avoid false-positive
lockdep deadlock detection. Virtual interfaces such as team usually
have their own lock for protecting private data.
These interfaces can be nested.
team0
|
team1
Each interface's lock is actually different(team0->lock and team1->lock).
So,
mutex_lock(&team0->lock);
mutex_lock(&team1->lock);
mutex_unlock(&team1->lock);
mutex_unlock(&team0->lock);
The above case is absolutely safe. But lockdep warns about deadlock.
Because the lockdep understands these two locks are same. This is a
false-positive lockdep warning.
So, in order to avoid this problem, the team interfaces started to use
dynamic lockdep key. The false-positive problem was fixed, but it
introduced a new problem.
When the new team virtual interface is created, it registers a dynamic
lockdep key(creates dynamic lockdep key) and uses it. But there is the
limitation of the number of lockdep keys.
So, If so many team interfaces are created, it consumes all lockdep keys.
Then, the lockdep stops to work and warns about it.
In order to fix this problem, team interfaces use the subclass instead
of the dynamic key. So, when a new team interface is created, it doesn't
register(create) a new lockdep, but uses existed subclass key instead.
It is already used by the bonding interface for a similar case.
As the bonding interface does, the subclass variable is the same as
the 'dev->nested_level'. This variable indicates the depth in the stacked
interface graph.
The 'dev->nested_level' is protected by RTNL and RCU.
So, 'mutex_lock_nested()' for 'team->lock' requires RTNL or RCU.
In the current code, 'team->lock' is usually acquired under RTNL, there is
no problem with using 'dev->nested_level'.
The 'team_nl_team_get()' and The 'lb_stats_refresh()' functions acquire
'team->lock' without RTNL.
But these don't iterate their own ports nested so they don't need nested
lock.
Reproducer:
for i in {0..1000}
do
ip link add team$i type team
ip link add dummy$i master team$i type dummy
ip link set dummy$i up
ip link set team$i up
done
Splat looks like:
BUG: MAX_LOCKDEP_ENTRIES too low!
turning off the locking correctness validator.
Please attach the output of /proc/lock_stat to the bug report
CPU: 0 PID: 4104 Comm: ip Not tainted 6.5.0-rc7+ #45
Call Trace:
<TASK>
dump_stack_lvl+0x64/0xb0
add_lock_to_list+0x30d/0x5e0
check_prev_add+0x73a/0x23a0
...
sock_def_readable+0xfe/0x4f0
netlink_broadcast+0x76b/0xac0
nlmsg_notify+0x69/0x1d0
dev_open+0xed/0x130
...
Reported-by: syzbot+9bbbacfbf1e04d5221f7@syzkaller.appspotmail.com
Fixes: 369f61bee0f5 ("team: fix nested locking lockdep warning")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Adds a new line to the docstrings of functions wrapping __xa_alloc() and
__xa_alloc_cyclic(), informing about the necessity of flag XA_FLAGS_ALLOC
being set previously.
The documentation so far says that functions wrapping __xa_alloc() and
__xa_alloc_cyclic() are supposed to return either -ENOMEM or -EBUSY in
case of an error. If the xarray has been initialized without the flag
XA_FLAGS_ALLOC, however, they fail with a different, undocumented error
code.
As hinted at in Documentation/core-api/xarray.rst, wrappers around these
functions should only be invoked when the flag has been set. The
functions' documentation should reflect that as well.
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Revert non-waiting FLUSH due to a regression
- Fix a lookup counter leak in readdirplus
- Add an option to allow shared mmaps in no-cache mode
- Add btime support and statx intrastructure to the protocol
- Invalidate positive/negative dentry on failed create/delete
* tag 'fuse-update-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: conditionally fill kstat in fuse_do_statx()
fuse: invalidate dentry on EEXIST creates or ENOENT deletes
fuse: cache btime
fuse: implement statx
fuse: add ATTR_TIMEOUT macro
fuse: add STATX request
fuse: handle empty request_mask in statx
fuse: write back dirty pages before direct write in direct_io_relax mode
fuse: add a new fuse init flag to relax restrictions in no cache mode
fuse: invalidate page cache pages before direct write
fuse: nlookup missing decrement in fuse_direntplus_link
Revert "fuse: in fuse_flush only wait if someone wants the return code"
|
|
There are no more users of thermal_zone_device_register(), so drop it
from the core.
Note that thermal_zone_device_register_with_trips() may be renamed to
thermal_zone_device_register() in the future, but only after a grace
period allowing all of the possible work in progress that may be using
the latter to adjust.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Multiple callers of thermal_zone_device_register() don't pass any trips
to it and they might use a shortened argument list for that, so add
a special function with fewer arguments for this purpose.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
For consistency, add a missing thermal_zone_device_register_with_trips()
stub for the CONFIG_THERMAL unset case, specify argument names in all of
the thermal zone registration and unregistration function headers and
make all of them use white space consistently.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata updates from Damien Le Moal:
- Fix OF include file for ata platform drivers (Rob)
- Simplify various ahci, sata and pata platform drivers using the
function devm_platform_ioremap_resource() (Yangtao)
- Cleanup libata time related argument types (e.g. timeouts values)
(Sergey)
- Cleanup libata code around error handling as all ata drivers now
define a error_handler operation (Hannes and Niklas)
- Remove functions intended for libsas that are in fact unused (Niklas)
- Change the remove device callback of platform drivers to a null
function (Uwe)
- Simplify the pata_imx driver using devm_clk_get_enabled() (Li)
- Remove old and uinused remnants of the ide code in arm, parisc,
powerpc, sparc and m68k architectures and associated drivers
(pata_buddha, pata_falcon and pata_gayle) (Geert)
- Add missing MODULE_DESCRIPTION() in the sata_gemini and pata_ftide010
drivers (me)
- Several fixes for the pata_ep93xx and pata_falcon drivers (Nikita,
Michael)
- Add Elkhart Lake AHCI controller support to the ahci driver (Werner)
- Disable NCQ trim on Micron 1100 drives (Pawel)
* tag 'ata-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (60 commits)
ata: libata-core: Disable NCQ_TRIM on Micron 1100 drives
ata: ahci: Add Elkhart Lake AHCI controller
ata: pata_falcon: add data_swab option to byte-swap disk data
ata: pata_falcon: fix IO base selection for Q40
ata: pata_ep93xx: use soc_device_match for UDMA modes
ata: pata_ep93xx: fix error return code in probe
ata: sata_gemini: Add missing MODULE_DESCRIPTION
ata: pata_ftide010: Add missing MODULE_DESCRIPTION
m68k: Remove <asm/ide.h>
ata: pata_gayle: Remove #include <asm/ide.h>
ata: pata_falcon: Remove #include <asm/ide.h>
ata: pata_buddha: Remove #include <asm/ide.h>
asm-generic: Remove ide_iops.h
sparc: Remove <asm/ide.h>
powerpc: Remove <asm/ide.h>
parisc: Remove <asm/ide.h>
ARM: Remove <asm/ide.h>
ata: pata_imx: Use helper function devm_clk_get_enabled()
ata: sata_rcar: Convert to platform remove callback returning void
ata: sata_mv: Convert to platform remove callback returning void
...
|
|
The of_overlay_fdt_apply has been changed but when CONFIG_OF_OVERLAY
support is not configured then old stub prototype is declared
by of.h header.
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Fixes: 47284862bfc7 ("of: overlay: Extend of_overlay_fdt_apply() to specify the target node")
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20230904100002.7913-1-pisa@cmp.felk.cvut.cz
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Enable -Wenum-conversion warning option
- Refactor the rpm-pkg target
- Fix scripts/setlocalversion to consider annotated tags for rt-kernel
- Add a jump key feature for the search menu of 'make nconfig'
- Support Qt6 for 'make xconfig'
- Enable -Wformat-overflow, -Wformat-truncation, -Wstringop-overflow,
and -Wrestrict warnings for W=1 builds
- Replace <asm/export.h> with <linux/export.h> for alpha, ia64, and
sparc
- Support DEB_BUILD_OPTIONS=parallel=N for the debian source package
- Refactor scripts/Makefile.modinst and fix some modules_sign issues
- Add a new Kconfig env variable to warn symbols that are not defined
anywhere
- Show help messages of config fragments in 'make help'
* tag 'kbuild-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (62 commits)
kconfig: fix possible buffer overflow
kbuild: Show marked Kconfig fragments in "help"
kconfig: add warn-unknown-symbols sanity check
kbuild: dummy-tools: make MPROFILE_KERNEL checks work on BE
Documentation/llvm: refresh docs
modpost: Skip .llvm.call-graph-profile section check
kbuild: support modules_sign for external modules as well
kbuild: support 'make modules_sign' with CONFIG_MODULE_SIG_ALL=n
kbuild: move more module installation code to scripts/Makefile.modinst
kbuild: reduce the number of mkdir calls during modules_install
kbuild: remove $(MODLIB)/source symlink
kbuild: move depmod rule to scripts/Makefile.modinst
kbuild: add modules_sign to no-{compiler,sync-config}-targets
kbuild: do not run depmod for 'make modules_sign'
kbuild: deb-pkg: support DEB_BUILD_OPTIONS=parallel=N in debian/rules
alpha: remove <asm/export.h>
alpha: replace #include <asm/export.h> with #include <linux/export.h>
ia64: remove <asm/export.h>
ia64: replace #include <asm/export.h> with #include <linux/export.h>
sparc: remove <asm/export.h>
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- Stefan Roesch has added ksm statistics to /proc/pid/smaps
- Also a number of singleton patches, mainly cleanups and leftovers
* tag 'mm-stable-2023-09-04-14-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/kmemleak: move up cond_resched() call in page scanning loop
mm: page_alloc: remove stale CMA guard code
MAINTAINERS: add rmap.h to mm entry
rmap: remove anon_vma_link() nommu stub
proc/ksm: add ksm stats to /proc/pid/smaps
mm/hwpoison: rename hwp_walk* to hwpoison_walk*
mm: memory-failure: add PageOffline() check
|
