summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2013-05-28ath9k: use correct OTP register offsets for AR9550Gabor Juhos
Accessing the OTP memory on AR9950 causes a data bus like this: Data bus error, epc == 801f7774, ra == 801f7774 Oops[#1]: CPU: 0 PID: 1 Comm: swapper Not tainted 3.10.0-rc3 #592 task: 87c28000 ti: 87c22000 task.ti: 87c22000 $ 0 : 00000000 00000061 deadc0de 00000000 $ 4 : b8115f18 00015f18 00000007 00000004 $ 8 : 00000001 7c7c3c7c 7c7c7c7c 7c7c7c7c $12 : 7c7c3c7c 80320a68 00000000 7c7c7c3c $16 : 87cd8010 00015f18 00000007 00000000 $20 : 00000064 00000004 87c23c7c 8035210c $24 : 00000000 801f3674 $28 : 87c22000 87c23b48 00000001 801f7774 Hi : 00000000 Lo : 00000064 epc : 801f7774 ath9k_hw_wait+0x58/0xb0 Not tainted ra : 801f7774 ath9k_hw_wait+0x58/0xb0 Status: 1000cc03 KERNEL EXL IE Cause : 4080801c PrId : 00019750 (MIPS 74Kc) Modules linked in: Process swapper (pid: 1, threadinfo=87c22000, task=87c28000, ts=00000000) Stack : 0000000f 00000061 00002710 8006240c 00000001 87cd8010 87c23bb0 87cd8010 00000000 00000004 00000003 80210c7c 000000b3 67fa8000 0000032a 000006fe 000003e8 00000002 00000028 87c23bf0 000003ff 80210d24 803e5630 80210e28 00000000 00000007 87cd8010 00007044 00000004 00000061 000003ff 000001ff 87c26000 87cd8010 00000220 87cd8bb8 80210000 8020fcf4 87c22000 87c23c08 ... Call Trace: [<801f7774>] ath9k_hw_wait+0x58/0xb0 [<80210c7c>] ar9300_otp_read_word+0x80/0xd4 [<80210d24>] ar9300_read_otp+0x54/0xb0 [<8020fcf4>] ar9300_check_eeprom_header+0x1c/0x40 [<80210fe4>] ath9k_hw_ar9300_fill_eeprom+0x118/0x39c [<80206650>] ath9k_hw_eeprom_init+0x74/0xb4 [<801f96d0>] ath9k_hw_init+0x7ec/0x96c [<801e65ec>] ath9k_init_device+0x340/0x758 [<801f35d0>] ath_ahb_probe+0x21c/0x2c0 [<801c041c>] driver_probe_device+0xc0/0x1e4 [<801c05ac>] __driver_attach+0x6c/0xa4 [<801bea08>] bus_for_each_dev+0x64/0xa8 [<801bfa40>] bus_add_driver+0xcc/0x24c [<801c0954>] driver_register+0xbc/0x17c [<803f8fc0>] ath9k_init+0x5c/0x88 [<800608fc>] do_one_initcall+0xec/0x1a0 [<803e6a68>] kernel_init_freeable+0x13c/0x200 [<80309cdc>] kernel_init+0x1c/0xe4 [<80062450>] ret_from_kernel_thread+0x10/0x18 On the AR9550, the OTP registers are located at the same address as on the AR9340. Use the correct values to avoid the error. Cc: stable@vger.kernel.org # 3.6+ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-28brcmfmac: Disable powersave mode for P2P link.Hante Meuleman
For p2p client mode powersave mode should be kept disabled. It is working but inefficient. In general p2p links do no benefit from this mode, because these links are setup temporarily to transfer data. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-28brcmfmac: Add multi channel support for P2P.Hante Meuleman
Multi channel support was disabled. This patch will enable it and configure the P2P GO on the correct frequency when multi channel is used. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-28brcmfmac: use struct net_device::destructor to remove interfacesArend van Spriel
Upon deleting a P2P_CLIENT/GO interface the vif and consequently the wdev is freed before the net_device is actually being unregistered but cfg80211 still needs to access the wdev. Using destructor field to free the net_device and vif. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-28brcmfmac: free net device when registration failsArend van Spriel
When registration fails the net device is no longer needed. Free the net device and remove reference to private data from the driver. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-28brcmfmac: add additional parameter to brcmf_free_vif()Arend van Spriel
Pass the struct brcmf_cfg80211_info instance instead of obtaining through vif itself using vif->wdev. This is needed as the netdev associated with this vif is already unregistered. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-28brcmfmac: Fix p2p setup when connected to ap on 5G.Hante Meuleman
The firmware requires that on p2p setup when net interfaces are created or updated that they start initially with the same channel as the channel in use for the current connection (if any). If none exists take default channel 11. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-28brcmfmac: Turn off ARP offloading when configured for AP.Hante Meuleman
ARP offloading should only be used in STA or P2P client mode. It is currently configured once at init. When being configured for AP ARP offloading should be turned off and when AP mode is left it can be turned back on. Cc: stable@vger.kernel.org Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-28Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
2013-05-27iwlwifi: dvm: fix zero LQ CMD sending avoidanceEmmanuel Grumbach
In 63b77bf489881747c5118476918cc8c29378ee63 iwlwifi: dvm: don't send zeroed LQ cmd I tried to avoid to send zeroed LQ cmd, but I made a (very) stupid mistake in the memcmp. Since this patch has been ported to stable, the fix should go to stable too. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=58341 Cc: stable@vger.kernel.org Reported-by: Hinnerk van Bruinehsen <h.v.bruinehsen@fu-berlin.de> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-24ath9k_hw: improve performance for AR934x v1.3+Felix Fietkau
AR934x v1.3 no longer needs the DCU backoff reduction workaround for preventing rx overruns, but in turn needs the number of usable Tx buffers to be reduced slightly. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-24ath9k_hw: fix host interface reset on AR934xFelix Fietkau
If a local bus timeout has been detected, the host interface needs to be reset to clear the errors. AR934x uses a different synchronous interrupt bit to indicate this, so the check needs to be fixed. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-24ath9k_hw: fix spur mitigation issues on AR934xFelix Fietkau
Do not subtract spur power from noise floor on this chip, as it can lead to packet loss and other connectivity issues. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-22atmel: printing bogus informationDan Carpenter
There was an extra ';' character added to the end of the if statement which means that it always prints that the /proc entry wasn't created even though it was. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-22ath9k: prevent aggregation session deadlocksFelix Fietkau
Waiting for all subframes of an existing aggregation session to drain before allowing mac80211 to start a new one is fragile and deadlocks caused by this behavior have been observed. Since mac80211 has proper synchronization for aggregation session start/stop handling, a better approach to session handling is to simply allow mac80211 to start a new session at any time. This requires changing the code to discard any packets outside of the BlockAck window in the A-MPDU software retry code. This patch implements the above and also simplifies the code. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-21NFC: mei: Do not disable MEI devices from their remove routineSamuel Ortiz
Enabling and disabling device is exclusively handled by the mei_phy_ops. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-05-21NFC: mei_phy: Register event callback when enabling the deviceSamuel Ortiz
The callback registration starts a waiting read, so it needs to be fired everytime the device is enabled. Otherwise following writes will never get an answer back. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-05-21NFC: mei_phy depends on INTEL_MEISamuel Ortiz
INTEL_MEI_BUS_NFC never made it upstream, so make it depend on INTEL_MEI. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-05-17ath9k: fix draining aggregation tid buffersFelix Fietkau
After a tx attempt, an A-MPDU subframe can still have fi->retries at 0 (if the retry count wasn't incremented due to powersave). In that case it is still tracked as part of the block ack window, so when draining the tid queue, its sequence number needs to be cleared from the pending frame bitmap. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-17ath9k: fix rate handling/reportingFelix Fietkau
This patch fixes some issues introduced in the rate control API rework. When not running aggregation, copy bf->rates into info->control.rates before applying the rate control status to it. In ath_lookup_rate, the rates need to be pulled from bf->rates, not the tx info. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-17ath9k: fix aggregation stop/flush handlingFelix Fietkau
When aggregation stop is requested, don't run the mac80211 aggregation stop callback yet, while the session is still blocked. Also, when aggregation flush is requested, don't run the callback at all. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-17ath9k_hw: Enable manual peak calibration for AR9485Sujith Manoharan
Manual peak calibration is currently enabled only for AR9462 and AR9565. This is also required for AR9485. The initvals are also modified to disable HW peak calibration. Cc: <stable@vger.kernel.org> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-17rtlwifi: rtl8192cu: Add new USB IDAlbert Pool
This adds the USB ID of the On Networks N300MA, clone of Netgear WNA3100M. Signed-off-by: Albert Pool <albertpool@solcon.nl> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Reported-by: Ana Rey <Anazul77@hotmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-17brcmfmac: announce P2P_DEVICE support in wiphy structureArend van Spriel
P2P_DEVICE support was removed from brcmfmac for v3.9 kernel with the commit below: commit 1527c343c12f3a2aae532aa881d12c6fbf8749f4 Author: Arend van Spriel <arend@broadcom.com> Date: Thu Apr 4 12:10:11 2013 +0200 brcmfmac: remove advertising P2P device support However, it got merged into wireless-next. But for 3.10 brcmfmac does support P2P device. Putting it back with this commit. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-17rtlwifi: rtl8188ee: Fix warning when building on big-endian systemsLarry Finger
In http://lkml.indiana.edu/hypermail/linux/kernel/1305.1/index.html, Geert Uytterhoeven reports a new warning when building 3.10-rc1 in this driver. This is caused by using a "#if" test to see if __LITTLE_ENDIAN is set, which fails for all big-endian systems. Change to "ifdef". Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-17ath9k: Fix crash on module unloadSujith Manoharan
Make sure that any open relayfs files are closed before unregistering with mac80211, otherwise this crash is seen: [ 1331.097846] BUG: unable to handle kernel paging request at 6b6b6b8b [ 1331.098170] IP: [<c063d0d6>] debugfs_remove+0x26/0x80 [ 1331.098170] *pdpt = 000000002f9aa001 *pde = 0000000000000000 [ 1331.098170] Oops: 0000 [#1] PREEMPT SMP [ 1331.098170] Modules linked in: iptable_raw xt_CT nf_conntrack_ipv4 nf_defrag] [ 1331.098170] Pid: 4794, comm: rmmod Tainted: G WC 3.9.1+ #5 To Be Fi. [ 1331.098170] EIP: 0060:[<c063d0d6>] EFLAGS: 00010202 CPU: 0 [ 1331.098170] EIP is at debugfs_remove+0x26/0x80 [ 1331.098170] EAX: f2f3acd0 EBX: f2f3acd0 ECX: 00000006 EDX: f8622348 [ 1331.098170] ESI: 6b6b6b6b EDI: 00000001 EBP: ee251e14 ESP: ee251e0c [ 1331.098170] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 1331.098170] CR0: 8005003b CR2: 6b6b6b8b CR3: 2e7b7000 CR4: 000007e0 [ 1331.098170] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 1331.098170] DR6: ffff0ff0 DR7: 00000400 [ 1331.098170] Process rmmod (pid: 4794, ti=ee250000 task=efaa2560 task.ti=ee25) [ 1331.098170] Stack: [ 1331.098170] f241e170 0000000a ee251e1c f861394d ee251e28 c04e3088 f241e170 4 [ 1331.098170] c04e30fe f45482b0 ee251e54 c04e3187 f25e86b0 ee251e54 f8618748 0 [ 1331.098170] 0000000a 00000001 ee251e68 f860065b f2509e20 f25085a0 f5b6e8a4 8 [ 1331.098170] Call Trace: [ 1331.098170] [<f861394d>] remove_buf_file_handler+0xd/0x20 [ath9k] [ 1331.098170] [<c04e3088>] relay_remove_buf+0x18/0x30 [ 1331.098170] [<c04e30fe>] relay_close_buf+0x2e/0x40 [ 1331.098170] [<c04e3187>] relay_close+0x77/0xf0 [ 1331.098170] [<f8618748>] ? dpd_exit+0x38/0x40 [ath9k] [ 1331.098170] [<f860065b>] ath9k_deinit_softc+0x8b/0xa0 [ath9k] [ 1331.098170] [<f86006b8>] ath9k_deinit_device+0x48/0x60 [ath9k] [ 1331.098170] [<f86107f1>] ath_pci_remove+0x31/0x50 [ath9k] [ 1331.098170] [<c06dbff8>] pci_device_remove+0x38/0xc0 [ 1331.098170] [<c079daa4>] __device_release_driver+0x64/0xc0 [ 1331.098170] [<c079db97>] driver_detach+0x97/0xa0 [ 1331.098170] [<c079cacc>] bus_remove_driver+0x6c/0xe0 [ 1331.098170] [<c079c197>] ? bus_put+0x17/0x20 [ 1331.098170] [<c079cae3>] ? bus_remove_driver+0x83/0xe0 [ 1331.098170] [<c079e709>] driver_unregister+0x49/0x80 [ 1331.098170] [<c06dc138>] pci_unregister_driver+0x18/0x80 [ 1331.098170] [<f8610602>] ath_pci_exit+0x12/0x20 [ath9k] [ 1331.098170] [<f8619ce0>] ath9k_exit+0x17/0x337 [ath9k] [ 1331.098170] [<c09e537d>] ? mutex_unlock+0xd/0x10 [ 1331.098170] [<c04bd36c>] sys_delete_module+0x17c/0x250 [ 1331.098170] [<c0540dc4>] ? do_munmap+0x244/0x2d0 [ 1331.098170] [<c0540e96>] ? vm_munmap+0x46/0x60 [ 1331.098170] [<c09e8dc4>] ? restore_all+0xf/0xf [ 1331.098170] [<c09ebf50>] ? __do_page_fault+0x4c0/0x4c0 [ 1331.098170] [<c04b18e4>] ? trace_hardirqs_on_caller+0xf4/0x180 [ 1331.098170] [<c09ef28d>] sysenter_do_call+0x12/0x38 [ 1331.098170] Code: 90 8d 74 26 00 55 89 e5 83 ec 08 89 1c 24 89 74 24 04 3e 82 [ 1331.098170] EIP: [<c063d0d6>] debugfs_remove+0x26/0x80 SS:ESP 0068:ee251e0c [ 1331.098170] CR2: 000000006b6b6b8b [ 1331.727971] ---[ end trace b5bb9f2066cef7f9 ]--- Cc: <stable@vger.kernel.org> Acked-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Tested-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-17net/wireless: ATH9K should depend on HAS_DMAGeert Uytterhoeven
If NO_DMA=y: drivers/built-in.o: In function `ath9k_beacon_generate': drivers/net/wireless/ath/ath9k/beacon.c:146: undefined reference to `dma_unmap_single' drivers/net/wireless/ath/ath9k/beacon.c:174: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath9k/beacon.c:176: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `ath9k_beacon_remove_slot': drivers/net/wireless/ath/ath9k/beacon.c:252: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath_descdma_setup': drivers/net/wireless/ath/ath9k/init.c:382: undefined reference to `dmam_alloc_coherent' drivers/built-in.o: In function `ath_edma_get_buffers': drivers/net/wireless/ath/ath9k/recv.c:616: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `ath_get_next_rx_buf': drivers/net/wireless/ath/ath9k/recv.c:740: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `ath_rx_edma_cleanup': drivers/net/wireless/ath/ath9k/recv.c:176: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath_rx_cleanup': drivers/net/wireless/ath/ath9k/recv.c:340: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath_rx_edma_buf_link': drivers/net/wireless/ath/ath9k/recv.c:122: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `ath_rx_tasklet': drivers/net/wireless/ath/ath9k/recv.c:1275: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath9k/recv.c:1277: undefined reference to `dma_mapping_error' drivers/net/wireless/ath/ath9k/recv.c:1283: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath_rx_edma_init': drivers/net/wireless/ath/ath9k/recv.c:226: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath9k/recv.c:229: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `ath_rx_init': drivers/net/wireless/ath/ath9k/recv.c:303: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath9k/recv.c:306: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `ath_tx_complete_buf': drivers/net/wireless/ath/ath9k/xmit.c:2088: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath_txstatus_setup': drivers/net/wireless/ath/ath9k/xmit.c:2344: undefined reference to `dmam_alloc_coherent' drivers/built-in.o: In function `ath_tx_set_retry': drivers/net/wireless/ath/ath9k/xmit.c:307: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `ath_tx_setup_buffer': drivers/net/wireless/ath/ath9k/xmit.c:1887: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath9k/xmit.c:1889: undefined reference to `dma_mapping_error' Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-17bcma: add more core IDsRafał Miłecki
PCIe and ARM CR4 cores were found on 14e4:43b1 AKA BCM4352. Reported-by: Gabriel Thörnblad <gabriel@thornblad.com> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-17iwlegacy: remove inline marking of EXPORT_SYMBOL functionsDenis Efremov
EXPORT_SYMBOL and inline directives are contradictory to each other. The patch fixes this inconsistency. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Denis Efremov <yefremov.denis@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-17Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
2013-05-16iwlwifi: mvm: fix aggregation drain flowEmmanuel Grumbach
Move the counter for non-AMPDU frames to mvm. It is needed for the drain flow which happens once the ieee80211_sta has been freed, so keeping it in iwl_mvm_sta which is embed into ieee80211_sta is not a good idea. Also, since its purpose it to remove the STA in the fw only after all the frames for this station have exited the shared Tx queues, we need to decrement it in the reclaim flow. This flow can happen after ieee80211_sta has been removed, which means that we have no iwl_mvm_sta there. So we can't know what is the vif type. Hence, we know audit these frames for all the vif types. In order to avoid spawning sta_drained_wk all the time, we now check that we are in a flow in which draining might happen - only when mvmsta is NULL. This is better than previous code that would spawn sta_drained_wk all the time in AP mode. Cc: stable@vger.kernel.org [3.9] Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-16iwlwifi: mvm: Prevent setting assoc flag in MAC_CONTEXT_CMDAlexander Bondar
In the normal flow first MAC_CONTEXT_CMD for particular interface is never sent while associated. The exception is fw restart flow when resuming from suspend when WoWLAN is enabled. In this case successive "add" and "modify" MAC_CONTEXT_CMD commands may be sent with assoc flag set what cause FW mal functioning. To prevent this never set assoc flag in MAC_CONTEXT_CMD with action "add". Cc: stable@vger.kernel.org Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-16iwlwifi: mvm: tell firmware to let multicast frames inEmmanuel Grumbach
Without this command, the firmware will filter out all the multicast frames. Let them all in as for now. Later we will want to optimize this to save power. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-16iwlwifi: mvm: Always use SCAN_TYPE_FORCEDIlan Peer
The FW AUX framework does not handle well cases where time events fail to be scheduled (and as a result issues assert 0x3330). Until a proper fix is in place, WA this by always setting the scan type to SCAN_TYPE_FORCED. Cc: stable@vger.kernel.org Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-16mac80211_hwsim: correctly register the platform driverSasha Levin
Not registering a platform_driver would make us access garbage when the platform callbacks under driver_register() kicks in. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Tested-By: Martin Pitt <martin.pitt@ubuntu.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-10Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-05-09Merge git://git.infradead.org/users/willy/linux-nvmeLinus Torvalds
Pull NVMe driver update from Matthew Wilcox: "Lots of exciting new features in the NVM Express driver this time, including support for emulating SCSI commands, discard support and the ability to submit per-sector metadata with I/Os. It's still mostly bugfixes though!" * git://git.infradead.org/users/willy/linux-nvme: (27 commits) NVMe: Use user defined admin ioctl timeout NVMe: Simplify Firmware Activate code slightly NVMe: Only clear the enable bit when disabling controller NVMe: Wait for device to acknowledge shutdown NVMe: Schedule timeout for sync commands NVMe: Meta-data support in NVME_IOCTL_SUBMIT_IO NVMe: Device specific stripe size handling NVMe: Split non-mergeable bio requests NVMe: Remove dead code in nvme_dev_add NVMe: Check for NULL memory in nvme_dev_add NVMe: Fix error clean-up on nvme_alloc_queue NVMe: Free admin queue on request_irq error NVMe: Add scsi unmap to SG_IO NVMe: queue usage fixes in nvme-scsi NVMe: Set TASK_INTERRUPTIBLE before processing queues NVMe: Add a character device for each nvme device NVMe: Fix endian-related problems in user I/O submission path NVMe: Fix I/O cancellation status on big-endian machines NVMe: Fix sparse warnings in scsi emulation NVMe: Don't fail initialisation unnecessarily ...
2013-05-09Merge tag 'acpi-fixes-3.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPICA fixes from Rafael Wysocki: - _INI regression fix from Tomasz Nowicki. - Fix for a possible memory leak in _OSI support routine from Jung-uk Kim. - Fix for a possible buffer overflow during field unit read operation from Bob Moore. * tag 'acpi-fixes-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPICA: ACPICA: Fix for _INI regression ACPICA: _OSI support: Fix possible memory leak ACPICA: Fix possible buffer overflow during a field unit read operation
2013-05-09Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes and straggler patches from Olof Johansson: "A collection of fixes for fall out from 3.10 merge window, some build fixes and warning cleanups and a small handful of patches that were small and contained and made sense to still include in 3.10 (some of these have also been in -next since the merge window opened). Largest continous series is for OMAP, but there's a handful for other platforms. For i.MX, one of the patches are framebuffer fixups due to fallout during the merge window, and the other removes some stale and broken code." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (34 commits) ARM: exynos: dts: Fixed vbus-gpios ARM: EXYNOS5: Fix kernel dump in AFTR idle mode ARM: ux500: Rid ignored return value of regulator_enable() compiler warning ARM: ux500: read the correct soc_id number ARM: exynos: dts: cros5250: add cyapa trackpad video: mxsfb: Adapt to new videomode API ARM: imx: Select GENERIC_ALLOCATOR ARM: imx: compile fix for hotplug.c ARM: dts: don't assume boards are using twl4030 for omap3 ARM: OMAP2+: Remove bogus IS_ERR_OR_NULL checking from id.c ARM: dts: Configure and fix the McSPI pins for 4430sdp ARM: dts: AM33XX: Add GPMC node ARM: dts: OMAP4460: Fix CPU OPP voltages ARM: dts: OMAP36xx: Fix CPU OPP voltages ARM: OMAP4+: omap2plus_defconfig: Enable audio via TWL6040 as module ARM: OMAP2: AM33XX: id: Add support for new AM335x PG2.1 Si omap: mux: add AM/DM37x gpios ARM: OMAP1: DMA: fix error handling in omap1_system_dma_init() ARM: OMAP2+: omap_device: use late_initcall_sync ARM: OMAP: RX-51: change probe order of touchscreen and panel SPI devices ...
2013-05-09Merge branch 'stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile Pull tile update from Chris Metcalf: "The interesting bug fix is support for the upcoming "4.2" release of the Tilera hypervisor, which by default launches Linux at privilege level 2 instead of 1. The fix lets new and old hypervisors and Linuxes interoperate more smoothly, so I've tagged it for stable@kernel.org so that older Linuxes will be able to boot under the newer hypervisor." * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: usb: tilegx: fix memleak when create hcd fail arch/tile: remove inline marking of EXPORT_SYMBOL functions rtc: rtc-tile: add missing platform_device_unregister() when module exit tile: support new Tilera hypervisor
2013-05-09video: mxsfb: Adapt to new videomode APIFabio Estevam
commit 6cd2c7db4 (videomode: videomode_from_timing work) changed the name of the function from videomode_from_timing() to videomode_from_timings(). commit 32ed6ef1 (videomode: create enum for videomode's display flags) changed the 'data_flags' field in videomode structure to 'flags' Adapt to these changes in order to fix the following errors: drivers/video/mxsfb.c:761:3: error: too many arguments to function 'videomode_from_timing' drivers/video/mxsfb.c:761:7: error: void value not ignored as it ought to be drivers/video/mxsfb.c:768:9: error: 'struct videomode' has no member named 'data_flags' drivers/video/mxsfb.c:770:9: error: 'struct videomode' has no member named 'data_flags' Also, select VIDEOMODE_HELPER instead of OF_VIDEOMODE, as this one is deprecated. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-05-09NVMe: Use user defined admin ioctl timeoutKeith Busch
Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2013-05-09usb: tilegx: fix memleak when create hcd failLibo Chen
When usb_create_hcd fail, we should call gxio_usb_host_destroy Signed-off-by: Libo Chen <libo.chen@huawei.com> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [extended to EHCI]
2013-05-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking update from David Miller: 1) Propagate return error values properly in irda, spider_net, sfc, and bfin_mac. From Wei Yongjun. 2) Fix fec driver OOPS on rapid link up/down, from Frank Li. 3) FIX VF resource allocation and chip message payload length errors in be2net driver, from Sathya Perla. 4) Fix inner protocol inspection during GSO from Pravin B Shelar. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: if_cablemodem.h: Add parenthesis around ioctl macros gso: Handle Trans-Ether-Bridging protocol in skb_network_protocol() net: fec: fix kernel oops when plug/unplug cable many times bfin_mac: fix error return code in bfin_mac_probe() sfc: fix return value check in efx_ptp_probe_channel() net/spider_net: fix error return code in spider_net_open() net/irda: fix error return code in bfin_sir_open() net: of_mdio: fix behavior on missing phy device sierra_net: keep status interrupt URB active usbnet: allow status interrupt URB to always be active qmi_wwan/cdc_ether: add device IDs for Dell 5804 (Novatel E371) WWAN card be2net: disable TX in be_close() be2net: fix EQ from getting full while cleaning RX CQ be2net: fix payload_len value for GET_MAC_LIST cmd req be2net: provision VF resources before enabling SR-IOV
2013-05-09Merge tag 'pci-v3.10-fixes-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "MSI: PCI: Set ->mask_pos correctly Hotplug: PCI: Delay final fixups until resources are assigned Moorestown: x86/pci/mrst: Use configuration mechanism 1 for 00:00.0, 00:02.0, 00:03.0" * tag 'pci-v3.10-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Delay final fixups until resources are assigned x86/pci/mrst: Use configuration mechanism 1 for 00:00.0, 00:02.0, 00:03.0 PCI: Set ->mask_pos correctly
2013-05-09Merge tag 'for-linus-20130509' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD update from David Woodhouse: - Lots of cleanups from Artem, including deletion of some obsolete drivers - Support partitions larger than 4GiB in device tree - Support for new SPI chips * tag 'for-linus-20130509' of git://git.infradead.org/linux-mtd: (83 commits) mtd: omap2: Use module_platform_driver() mtd: bf5xx_nand: Use module_platform_driver() mtd: denali_dt: Remove redundant use of of_match_ptr mtd: denali_dt: Change return value to fix smatch warning mtd: denali_dt: Use module_platform_driver() mtd: denali_dt: Fix incorrect error check mtd: nand: subpage write support for hardware based ECC schemes mtd: omap2: use msecs_to_jiffies() mtd: nand_ids: use size macros mtd: nand_ids: improve LEGACY_ID_NAND macro a bit mtd: add 4 Toshiba nand chips for the full-id case mtd: add the support to parse out the full-id nand type mtd: add new fields to nand_flash_dev{} mtd: sh_flctl: Use of_match_ptr() macro mtd: gpio: Use of_match_ptr() macro mtd: gpio: Use devm_kzalloc() mtd: davinci_nand: Use of_match_ptr() mtd: dataflash: Use of_match_ptr() macro mtd: remove h720x flash support mtd: onenand: remove OneNAND simulator ...
2013-05-09Merge tag 'firewire-updates' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewure updates from Stefan Richter: - fix controller removal when controller is in suspended state - fix video reception on VIA VT6306 with gstreamer, MythTV, and maybe dv4l - fix a startup issue with Agere/LSI FW643-e2 - error logging improvements and other small updates * tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: ohci: dump_stack() for PHY regs read/write failures firewire: ohci: Improve bus reset error messages firewire: ohci: Alias dev_* log functions firewire: ohci: Fix 'failed to read phy reg' on FW643 rev8 firewire: ohci: fix VIA VT6306 video reception firewire: ohci: Check LPS before register access on pci removal firewire: ohci: Fix double free_irq() firewire: remove unnecessary alloc/OOM messages firewire: sbp2: replace BUG_ON by WARN_ON firewire: core: remove an always false test firewire: Remove two unneeded checks for macros
2013-05-09Merge tag 'edac_fixes_for_3.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp Pull two small EDAC fixes from Borislav Petkov. * tag 'edac_fixes_for_3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC: Don't give write permission to read-only files EDAC, mc_sysfs.c: Fix string array pointer types
2013-05-09Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds
Pull watchdog update from Wim Van Sebroeck: "Fix a kdump issue in hpwdt and a possible NULL dereference" * git://www.linux-watchdog.org/linux-watchdog: watchdog: Fix race condition in registration code watchdog: Convert to devm_ioremap_resource()
2013-05-09Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds
Pull removal of GENERIC_GPIO from Grant Likely: "GENERIC_GPIO now synonymous with GPIOLIB. There are no longer any valid cases for enableing GENERIC_GPIO without GPIOLIB, even though it is possible to do so which has been causing confusion and breakage. This branch does the work to completely eliminate GENERIC_GPIO." * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: gpio: update gpio Chinese documentation Remove GENERIC_GPIO config option Convert selectors of GENERIC_GPIO to GPIOLIB blackfin: force use of gpiolib m68k: coldfire: use gpiolib mips: pnx833x: remove requirement for GENERIC_GPIO openrisc: default GENERIC_GPIO to false avr32: default GENERIC_GPIO to false xtensa: remove explicit selection of GENERIC_GPIO sh: replace CONFIG_GENERIC_GPIO by CONFIG_GPIOLIB powerpc: remove redundant GENERIC_GPIO selection unicore32: default GENERIC_GPIO to false unicore32: remove unneeded select GENERIC_GPIO arm: plat-orion: use GPIO driver on CONFIG_GPIOLIB arm: remove redundant GENERIC_GPIO selection mips: alchemy: require gpiolib mips: txx9: change GENERIC_GPIO to GPIOLIB mips: loongson: use GPIO driver on CONFIG_GPIOLIB mips: remove redundant GENERIC_GPIO select
generated by cgit v1.2.3 (git 2.25.1) at 2025-03-01 20:20:34 +0000