summaryrefslogtreecommitdiff
path: root/drivers/platform/x86
AgeCommit message (Collapse)Author
2024-10-29platform/x86: think-lmi: Allow empty admin passwordMark Pearson
SVP = BIOS Supervisor/Admin password SMP = BIOS System password If SMP ACL is enabled in the BIOS then the system allows you to set the SMP without a SVP password configured. Change code to allow this. BIOS will return permissions error if SVP is required. Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca> Link: https://lore.kernel.org/r/20241024195536.6992-3-mpearson-lenovo@squebb.ca Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-10-29platform/x86: think-lmi: Add certificate as mechanismMark Pearson
As both password or certificate authentication are available as mechanisms update the documentation to add certificate as an option Update driver to return correct mechanism appropriately. Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca> Link: https://lore.kernel.org/r/20241024195536.6992-2-mpearson-lenovo@squebb.ca Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-10-29platform/x86: think-lmi: improve check if BIOS account security enabledMark Pearson
Improve determination of whether authentication account is enabled by checking if either password or certificate is enabled. Renamed valid to pwd_enabled for better readability. Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca> Link: https://lore.kernel.org/r/20241024195536.6992-1-mpearson-lenovo@squebb.ca Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-10-27Merge tag 'platform-drivers-x86-v6.12-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: - Asus thermal profile fix, fixing performance issues on Lunar Lake - Intel PMC: one revert for a lockdep issue and one bugfix - Dell WMI: Ignore some WMI events on suspend/resume to silence warnings * tag 'platform-drivers-x86-v6.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: asus-wmi: Fix thermal profile initialization platform/x86: dell-wmi: Ignore suspend notifications platform/x86/intel/pmc: Fix pmc_core_iounmap to call iounmap for valid addresses platform/x86:intel/pmc: Revert "Enable the ACPI PM Timer to be turned off when suspended"
2024-10-26platform/x86: asus-wmi: Fix thermal profile initializationArmin Wolf
When support for vivobook fan profiles was added, the initial call to throttle_thermal_policy_set_default() was removed, which however is necessary for full initialization. Fix this by calling throttle_thermal_policy_set_default() again when setting up the platform profile. Fixes: bcbfcebda2cb ("platform/x86: asus-wmi: add support for vivobook fan profiles") Reported-by: Michael Larabel <Michael@phoronix.com> Closes: https://www.phoronix.com/review/lunar-lake-xe2/5 Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20241025191514.15032-2-W_Armin@gmx.de Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-10-25platform/x86: eeepc-laptop: use sysfs_emit() instead of sprintf()chen zhang
Follow the advice in Documentation/filesystems/sysfs.rst: show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Signed-off-by: chen zhang <chenzhang@kylinos.cn> Link: https://lore.kernel.org/r/20241023012905.15551-1-chenzhang@kylinos.cn Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-10-25platform/x86/amd/hsmp: Make hsmp_pdev static instead of globalSuma Hegde
Instead of making hsmp_pdev global and exporting this symbol from hsmp.c, make it static and create a wrapper function get_hsmp_pdev() to access hsmp_pdev from plat.c and acpi.c. Signed-off-by: Suma Hegde <suma.hegde@amd.com> Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com> Link: https://lore.kernel.org/r/20241021111428.2676884-11-suma.hegde@amd.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-10-25platform/x86/amd/hsmp: Use dev_groups in the driver structureSuma Hegde
Move out of device_add_group() variants, instead assign static array of attribute groups to .dev_groups in platform_driver structure. Then use is_visible to enable only the necessary files on the platform. .read() and .is_bin_visibile() have slightly different implemetations on ACPI and non-ACPI system, so move them to respective files. Signed-off-by: Suma Hegde <suma.hegde@amd.com> Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com> Link: https://lore.kernel.org/r/20241021111428.2676884-10-suma.hegde@amd.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-10-25platform/x86/amd/hsmp: Use name space while exporting module symbolsSuma Hegde
hsmp_send_message() is exported with AMD_HSMP name space. The other modules who would like to use this symbol, need to import AMD_HSMP namespace using MODULE_IMPORT_NS() to get away with warning. Signed-off-by: Suma Hegde <suma.hegde@amd.com> Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com> Link: https://lore.kernel.org/r/20241021111428.2676884-9-suma.hegde@amd.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-10-25platform/x86/amd/hsmp: Create separate ACPI, plat and common driversSuma Hegde
Separate the probes for HSMP ACPI and platform device drivers. Provide a Kconfig option to choose between ACPI or the platform device based driver. The common code which is the core part of the HSMP driver maintained at hsmp.c is guarded by AMD_HSMP config and is selected by these two driver configs. This will be built into separate hsmp_common.ko module and acpi as hsmp_acpi and plat as amd_hsmp respectively. Also add "|| COMPILE_TEST" clause in Kconfig to get build coverage for HSMP. Signed-off-by: Suma Hegde <suma.hegde@amd.com> Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com> Link: https://lore.kernel.org/r/20241021111428.2676884-8-suma.hegde@amd.com [ij: Fixed doc to use pre-formatted text for the ACPI dump.] Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-10-24ACPI: EC: make EC support compile-time conditionalArnd Bergmann
The embedded controller code is mainly used on x86 laptops and cannot work without PC style I/O port access. Make this a user-visible configuration option that is default enabled on x86 but otherwise disabled, and that can never be enabled unless CONFIG_HAS_IOPORT is also available. The empty stubs in internal.h help ignore the EC code in configurations that don't support it. In order to see those stubs, the sbshc code also has to include this header and drop duplicate declarations. All the direct callers of ec_read/ec_write already had an x86 dependency and now also need to depend on APCI_EC. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Hans de Goede <hdegoede@redhat.com> Link: https://patch.msgid.link/20241011061948.3211423-1-arnd@kernel.org [ rjw: Subject edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-10-22platform/x86/amd/hsmp: Change generic plat_dev name to hsmp_pdevSuma Hegde
plat_dev is a commonly used variable name, since its made as extern now, change it to more specific name. Also change miscdevice hsmp_device to mdev. Signed-off-by: Suma Hegde <suma.hegde@amd.com> Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20241021111428.2676884-7-suma.hegde@amd.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-10-22platform/x86/amd/hsmp: Move ACPI code to acpi.cSuma Hegde
An upcoming change splits HSMP driver into ACPI and platform device variants. Prepare for the split by moving ACPI related code to acpi.c from hsmp.c. Common code is kept in hsmp.c. No logical/functional change. We still have one driver at this point, the driver probe will be split in the next patch. Signed-off-by: Suma Hegde <suma.hegde@amd.com> Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20241021111428.2676884-6-suma.hegde@amd.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-10-22platform/x86/amd/hsmp: Move platform device specific code to plat.cSuma Hegde
An upcoming change splits HSMP driver into ACPI and platform device variants. Prepare for the split by moving platform device part to plat.c. No functinality/logical changes. Common code which can be used by ACPI and platform device remains in hsmp.c. ACPI code in hsmp.c will be moved to acpi.c in next patch. Signed-off-by: Suma Hegde <suma.hegde@amd.com> Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20241021111428.2676884-5-suma.hegde@amd.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-10-22platform/x86/amd/hsmp: Move structure and macros to header fileSuma Hegde
This is in preparation to splitting ACPI and platform device drivers. No logical change, move common structures, macros to hsmp.h, add missed header files, remove unwanted header inclusions, and re-order the header file in hsmp.c file. Signed-off-by: Suma Hegde <suma.hegde@amd.com> Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20241021111428.2676884-4-suma.hegde@amd.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-10-22platform/x86/amd/hsmp: Convert amd_hsmp_rdwr() to a function pointerSuma Hegde
This is in preparation to ACPI, Non-ACPI split. amd_hsmp_rdwr() is used to access HSMP protocol registers. ACPI and Non-ACPI use different methods to access these registers. Now that code is split and common functionality is kept in hsmp.c we need to define a function pointer to handle these functions separately. Signed-off-by: Suma Hegde <suma.hegde@amd.com> Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20241021111428.2676884-3-suma.hegde@amd.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-10-22platform/x86/amd/hsmp: Create wrapper function init_acpi()Suma Hegde
This is in preparation to splitting ACPI and platform device drivers. Having init_acpi() helps in smooth code movement. Signed-off-by: Suma Hegde <suma.hegde@amd.com> Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20241021111428.2676884-2-suma.hegde@amd.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-10-22platform/x86/amd/hsmp: Create hsmp/ directorySuma Hegde
This is in preparation to splitting ACPI and platform device drivers. Create and move hsmp specific code into its own directory, no logical changes. Signed-off-by: Suma Hegde <suma.hegde@amd.com> Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20241021111428.2676884-1-suma.hegde@amd.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-10-22platform/x86/intel/pmc: Disable C1 auto-demotion during suspendDavid E. Box
On some platforms, aggressive C1 auto-demotion may lead to failure to enter the deepest C-state during suspend-to-idle, causing high power consumption. To prevent this, disable C1 auto-demotion during suspend and re-enable on resume. Signed-off-by: David E. Box <david.e.box@linux.intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20241017210439.3449324-2-david.e.box@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-10-22platform/x86/intel/pmc: Refactor platform resume functions to use cnl_resume()David E. Box
Several platform resume functions currently call pmc_core_send_ltr_ignore() and pmc_core_resume_common(), both of which are already called by cnl_resume(). Simplify the code by having these functions call cnl_resume() directly. Signed-off-by: David E. Box <david.e.box@linux.intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20241017210439.3449324-1-david.e.box@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-10-22platform/x86: intel_scu_ipc: Save a copy of the entire struct intel_scu_ipc_dataAndy Shevchenko
Save a copy of the entire struct intel_scu_ipc_data for easier maintenance in case of expanding (adding new members become simpler). Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Ferry Toth <fntoth@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20241021133705.2933464-6-andriy.shevchenko@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-10-22platform/x86: intel_scu_ipc: Convert to check for errors firstAndy Shevchenko
Convert to use usual pattern, i.e. check for errors first. This makes code less indented and easier to read after all. Tested-by: Ferry Toth <fntoth@gmail.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20241021133705.2933464-5-andriy.shevchenko@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-10-22platform/x86: intel_scu_ipc: Simplify code with cleanup helpersAndy Shevchenko
Use macros defined in linux/cleanup.h to automate resource lifetime control in the driver. Tested-by: Ferry Toth <fntoth@gmail.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20241021133705.2933464-4-andriy.shevchenko@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-10-22platform/x86: intel_scu_ipc: Replace workaround by 32-bit IOAndy Shevchenko
The theory is that the so called workaround in pwr_reg_rdwr() is the actual reader of the data in 32-bit chunks. For some reason the 8-bit IO won't fail after that. Replace the workaround by using 32-bit IO explicitly and then memcpy() as much data as was requested by the user. The same approach is already in use in intel_scu_ipc_dev_command_with_size(). Tested-by: Ferry Toth <fntoth@gmail.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20241021133705.2933464-3-andriy.shevchenko@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-10-22platform/x86: intel_scu_ipc: Unify the flow in pwr_reg_rdwr()Andy Shevchenko
Unify the flow in pwr_reg_rdwr() with intel_scu_ipc_dev_command_with_size(). While read buffer is not currently being used by the callers of pwr_reg_rdwr(), this might change in the future. For the existing code it's a harmless change because the read data for the write operation is simply discarded. Tested-by: Ferry Toth <fntoth@gmail.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20241021133705.2933464-2-andriy.shevchenko@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-10-22platform/x86: dell-dcdbase: Replace snprintf in show functions with sysfs_emitHongling Zeng
show() must not use snprintf() when formatting the value to be returned to user space. Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn> Link: https://lore.kernel.org/r/20241022030500.9986-1-zenghongling@kylinos.cn Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-10-21platform/x86: dell-wmi: Ignore suspend notificationsArmin Wolf
Some machines like the Dell G15 5155 emit WMI events when suspending/resuming. Ignore those WMI events. Tested-by: siddharth.manthan@gmail.com Signed-off-by: Armin Wolf <W_Armin@gmx.de> Acked-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20241014220529.397390-1-W_Armin@gmx.de Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-10-21platform/x86/intel/pmc: Fix pmc_core_iounmap to call iounmap for valid addressesVamsi Krishna Brahmajosyula
Commit 50c6dbdfd16e ("x86/ioremap: Improve iounmap() address range checks") introduces a WARN when adrress ranges of iounmap are invalid. On Thinkpad P1 Gen 7 (Meteor Lake-P) this caused the following warning to appear: WARNING: CPU: 7 PID: 713 at arch/x86/mm/ioremap.c:461 iounmap+0x58/0x1f0 Modules linked in: rfkill(+) snd_timer(+) fjes(+) snd soundcore intel_pmc_core(+) int3403_thermal(+) int340x_thermal_zone intel_vsec pmt_telemetry acpi_pad pmt_class acpi_tad int3400_thermal acpi_thermal_rel joydev loop nfnetlink zram xe drm_suballoc_helper nouveau i915 mxm_wmi drm_ttm_helper gpu_sched drm_gpuvm drm_exec drm_buddy i2c_algo_bit crct10dif_pclmul crc32_pclmul ttm crc32c_intel polyval_clmulni rtsx_pci_sdmmc ucsi_acpi polyval_generic mmc_core hid_multitouch drm_display_helper ghash_clmulni_intel typec_ucsi nvme sha512_ssse3 video sha256_ssse3 nvme_core intel_vpu sha1_ssse3 rtsx_pci cec typec nvme_auth i2c_hid_acpi i2c_hid wmi pinctrl_meteorlake serio_raw ip6_tables ip_tables fuse CPU: 7 UID: 0 PID: 713 Comm: (udev-worker) Not tainted 6.12.0-rc2iounmap+ #42 Hardware name: LENOVO 21KWCTO1WW/21KWCTO1WW, BIOS N48ET19W (1.06 ) 07/18/2024 RIP: 0010:iounmap+0x58/0x1f0 Code: 85 6a 01 00 00 48 8b 05 e6 e2 28 04 48 39 c5 72 19 eb 26 cc cc cc 48 ba 00 00 00 00 00 00 32 00 48 8d 44 02 ff 48 39 c5 72 23 <0f> 0b 48 83 c4 08 5b 5d 41 5c c3 cc cc cc cc 48 ba 00 00 00 00 00 RSP: 0018:ffff888131eff038 EFLAGS: 00010207 RAX: ffffc90000000000 RBX: 0000000000000000 RCX: ffff888e33b80000 RDX: dffffc0000000000 RSI: ffff888e33bc29c0 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffff8881598a8000 R09: ffff888e2ccedc10 R10: 0000000000000003 R11: ffffffffb3367634 R12: 00000000fe000000 R13: ffff888101d0da28 R14: ffffffffc2e437e0 R15: ffff888110b03b28 FS: 00007f3c1d4b3980(0000) GS:ffff888e33b80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005651cfc93578 CR3: 0000000124e4c002 CR4: 0000000000f70ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __warn.cold+0xb6/0x176 ? iounmap+0x58/0x1f0 ? report_bug+0x1f4/0x2b0 ? handle_bug+0x58/0x90 ? exc_invalid_op+0x17/0x40 ? asm_exc_invalid_op+0x1a/0x20 ? iounmap+0x58/0x1f0 pmc_core_ssram_get_pmc+0x477/0x6c0 [intel_pmc_core] ? __pfx_pmc_core_ssram_get_pmc+0x10/0x10 [intel_pmc_core] ? __pfx_do_pci_enable_device+0x10/0x10 ? pci_wait_for_pending+0x60/0x110 ? pci_enable_device_flags+0x1e3/0x2e0 ? __pfx_mtl_core_init+0x10/0x10 [intel_pmc_core] pmc_core_ssram_init+0x7f/0x110 [intel_pmc_core] mtl_core_init+0xda/0x130 [intel_pmc_core] ? __mutex_init+0xb9/0x130 pmc_core_probe+0x27e/0x10b0 [intel_pmc_core] ? _raw_spin_lock_irqsave+0x96/0xf0 ? __pfx_pmc_core_probe+0x10/0x10 [intel_pmc_core] ? __pfx_mutex_unlock+0x10/0x10 ? __pfx_mutex_lock+0x10/0x10 ? device_pm_check_callbacks+0x82/0x370 ? acpi_dev_pm_attach+0x234/0x2b0 platform_probe+0x9f/0x150 really_probe+0x1e0/0x8a0 __driver_probe_device+0x18c/0x370 ? __pfx___driver_attach+0x10/0x10 driver_probe_device+0x4a/0x120 __driver_attach+0x190/0x4a0 ? __pfx___driver_attach+0x10/0x10 bus_for_each_dev+0x103/0x180 ? __pfx_bus_for_each_dev+0x10/0x10 ? klist_add_tail+0x136/0x270 bus_add_driver+0x2fc/0x540 driver_register+0x1a5/0x360 ? __pfx_pmc_core_driver_init+0x10/0x10 [intel_pmc_core] do_one_initcall+0xa4/0x380 ? __pfx_do_one_initcall+0x10/0x10 ? kasan_unpoison+0x44/0x70 do_init_module+0x296/0x800 load_module+0x5090/0x6ce0 ? __pfx_load_module+0x10/0x10 ? ima_post_read_file+0x193/0x200 ? __pfx_ima_post_read_file+0x10/0x10 ? rw_verify_area+0x152/0x4c0 ? kernel_read_file+0x257/0x750 ? __pfx_kernel_read_file+0x10/0x10 ? __pfx_filemap_get_read_batch+0x10/0x10 ? init_module_from_file+0xd1/0x130 init_module_from_file+0xd1/0x130 ? __pfx_init_module_from_file+0x10/0x10 ? __pfx__raw_spin_lock+0x10/0x10 ? __pfx_cred_has_capability.isra.0+0x10/0x10 idempotent_init_module+0x236/0x770 ? __pfx_idempotent_init_module+0x10/0x10 ? fdget+0x58/0x3f0 ? security_capable+0x7d/0x110 __x64_sys_finit_module+0xbe/0x130 do_syscall_64+0x82/0x160 ? __pfx_filemap_read+0x10/0x10 ? __pfx___fsnotify_parent+0x10/0x10 ? vfs_read+0x3a6/0xa30 ? vfs_read+0x3a6/0xa30 ? __seccomp_filter+0x175/0xc60 ? __pfx___seccomp_filter+0x10/0x10 ? fdget_pos+0x1ce/0x500 ? syscall_exit_to_user_mode_prepare+0x149/0x170 ? syscall_exit_to_user_mode+0x10/0x210 ? do_syscall_64+0x8e/0x160 ? switch_fpu_return+0xe3/0x1f0 ? syscall_exit_to_user_mode+0x1d5/0x210 ? do_syscall_64+0x8e/0x160 ? exc_page_fault+0x76/0xf0 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f3c1d6d155d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 83 58 0f 00 f7 d8 64 89 01 48 RSP: 002b:00007ffe6309db38 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 0000557c212550a0 RCX: 00007f3c1d6d155d RDX: 0000000000000000 RSI: 00007f3c1cd943bd RDI: 0000000000000025 RBP: 00007ffe6309dbf0 R08: 00007f3c1d7c7b20 R09: 00007ffe6309db80 R10: 0000557c21255270 R11: 0000000000000246 R12: 00007f3c1cd943bd R13: 0000000000020000 R14: 0000557c21255c80 R15: 0000557c21255240 </TASK> no_free_ptr(tmp_ssram) sets tmp_ssram NULL while assigning ssram. pmc_core_iounmap calls iounmap unconditionally causing the above warning to appear during boot. Fix it by checking for a valid address before calling iounmap. Also in the function pmc_core_ssram_get_pmc return -ENOMEM when ioremap fails similar to other instances in the file. Fixes: a01486dc4bb1 ("platform/x86/intel/pmc: Cleanup SSRAM discovery") Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: David E. Box <david.e.box@linux.intel.com> Signed-off-by: Vamsi Krishna Brahmajosyula <vamsikrishna.brahmajosyula@gmail.com> Link: https://lore.kernel.org/r/20241018104958.14195-1-vamsikrishna.brahmajosyula@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-10-21platform/x86:intel/pmc: Revert "Enable the ACPI PM Timer to be turned off ↵Marek Maslanka
when suspended" Commit e86c8186d03a ("platform/x86:intel/pmc: Enable the ACPI PM Timer to be turned off when suspended") can cause the suspend process to hang as the pmcdev->lock in the pmc_core_acpi_pm_timer_suspend_resume might already be held by the pmc_core_mphy_pg_show or pmc_core_pll_show if the userspace gets frozen when these functions are being executed. Also, pmc_core_acpi_pm_timer_suspend_resume must not sleep, as this function is called indirectly by the tick_freeze function in kernel/time/tick-common.c, which holds the spinlock. Revert the changes for now to fix these issues. Fixes: e86c8186d03a ("platform/x86:intel/pmc: Enable the ACPI PM Timer to be turned off when suspended") Reported-by: Luca Coelho <luca@coelho.fi> Closes: https://lore.kernel.org/lkml/40555604c3f4be43bf72e72d5409eaece4be9320.camel@coelho.fi/ Signed-off-by: Marek Maslanka <mmaslanka@google.com> Link: https://lore.kernel.org/r/20241012182656.2107178-1-mmaslanka@google.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-10-21platform/x86: classmate-laptop: Replace snprintf in show functions with ↵Hongling Zeng
sysfs_emit show() must not use snprintf() when formatting the value to be returned to user space. Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn> Link: https://lore.kernel.org/r/20241019054426.8182-1-zenghongling@kylinos.cn [ij: Added linux/sysfs.h include] Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-10-17platform/x86: Switch back to struct platform_driver::remove()Uwe Kleine-König
After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void") .remove() is (again) the right callback to implement for platform drivers. Convert all platform drivers below drivers/platform/x86/ to use .remove(), with the eventual goal to drop struct platform_driver::remove_new(). As .remove() and .remove_new() have the same prototypes, conversion is done by just changing the structure member name in the driver initializer. While touching these files, make indention of the struct initializer consistent in several files. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/20241017073802.53235-2-u.kleine-koenig@baylibre.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-10-16x86: acer-wmi: remove unused macrosBa Jing
After reviewing the code, it was found that these macros are never referenced in the code and are all set to 0. They should be removed. Signed-off-by: Ba Jing <bajing@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20241014183856.3942-1-bajing@cmss.chinamobile.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-10-16mfd: intel_soc_pmic_bxtwc: Use IRQ domain for TMU deviceAndy Shevchenko
While design wise the idea of converting the driver to use the hierarchy of the IRQ chips is correct, the implementation has (inherited) flaws. This was unveiled when platform_get_irq() had started WARN() on IRQ 0 that is supposed to be a Linux IRQ number (also known as vIRQ). Rework the driver to respect IRQ domain when creating each MFD device separately, as the domain is not the same for all of them. Fixes: 957ae5098185 ("platform/x86: Add Whiskey Cove PMIC TMU support") Fixes: 57129044f504 ("mfd: intel_soc_pmic_bxtwc: Use chained IRQs for second level IRQ chips") Reported-by: Zhang Ning <zhangn1985@outlook.com> Closes: https://lore.kernel.org/r/TY2PR01MB3322FEDCDC048B7D3794F922CDBA2@TY2PR01MB3322.jpnprd01.prod.outlook.com Tested-by: Zhang Ning <zhangn1985@outlook.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20241005193029.1929139-3-andriy.shevchenko@linux.intel.com Signed-off-by: Lee Jones <lee@kernel.org>
2024-10-10asus-laptop: prefer strscpy() over strcpy()Abdul Rahim
The function strcpy() is depreciated and potentially unsafe. It performs no bounds checking on the destination buffer. This could result in linear overflows beyond the end of the buffer, leading to all kinds of misbehaviors. The safe replacement is strscpy() [1]. this fixes checkpatch warning: WARNING: Prefer strscpy over strcpy Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strcpy [1] Signed-off-by: Abdul Rahim <abdul.rahim@myyahoo.com> Reviewed-by: Luke D. Jones <luke@ljones.dev> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20241009230558.51892-1-abdul.rahim@myyahoo.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-10-09platform/x86: wmi: Implement proper shutdown handlingArmin Wolf
When performing a system shutdown under Windows, all WMI clients are terminated. This means that the ACPI BIOS might expect all WMI devices to be disabled when shutting down. Emulate this behaviour by disabling all active WMI devices during shutdown. Also introduce a new WMI driver callback to allow WMI drivers to perform any device-specific actions before disabling the WMI device. Tested on a Dell Inspiron 3505. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20241005213825.701887-2-W_Armin@gmx.de Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-10-06Merge tag 'platform-drivers-x86-v6.12-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: - Intel PMC fix for suspend/resume issues on some Sky and Kaby Lake laptops - Intel Diamond Rapids hw-id additions - Documentation and MAINTAINERS fixes - Some other small fixes * tag 'platform-drivers-x86-v6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: x86-android-tablets: Fix use after free on platform_device_register() errors platform/x86: wmi: Update WMI driver API documentation platform/x86: dell-ddv: Fix typo in documentation platform/x86: dell-sysman: add support for alienware products platform/x86/intel: power-domains: Add Diamond Rapids support platform/x86: ISST: Add Diamond Rapids to support list platform/x86:intel/pmc: Disable ACPI PM Timer disabling on Sky and Kaby Lake platform/x86: dell-laptop: Do not fail when encountering unsupported batteries MAINTAINERS: Update Intel In Field Scan(IFS) entry platform/x86: ISST: Fix the KASAN report slab-out-of-bounds bug
2024-10-06platform/x86: x86-android-tablets: Fix use after free on ↵Hans de Goede
platform_device_register() errors x86_android_tablet_remove() frees the pdevs[] array, so it should not be used after calling x86_android_tablet_remove(). When platform_device_register() fails, store the pdevs[x] PTR_ERR() value into the local ret variable before calling x86_android_tablet_remove() to avoid using pdevs[] after it has been freed. Fixes: 5eba0141206e ("platform/x86: x86-android-tablets: Add support for instantiating platform-devs") Fixes: e2200d3f26da ("platform/x86: x86-android-tablets: Add gpio_keys support to x86_android_tablet_init()") Cc: stable@vger.kernel.org Reported-by: Aleksandr Burakov <a.burakov@rosalinux.ru> Closes: https://lore.kernel.org/platform-driver-x86/20240917120458.7300-1-a.burakov@rosalinux.ru/ Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20241005130545.64136-1-hdegoede@redhat.com
2024-10-06platform/x86: dell-sysman: add support for alienware productsCrag Wang
Alienware supports firmware-attributes and has its own OEM string. Signed-off-by: Crag Wang <crag_wang@dell.com> Link: https://lore.kernel.org/r/20241004152826.93992-1-crag_wang@dell.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-10-06platform/x86/intel: power-domains: Add Diamond Rapids supportSrinivas Pandruvada
Add Diamond Rapids (INTEL_PANTHERCOVE_X) to tpmi_cpu_ids to support domaid id mappings. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20241003215554.3013807-3-srinivas.pandruvada@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-10-06platform/x86: ISST: Add Diamond Rapids to support listSrinivas Pandruvada
Add Diamond Rapids (INTEL_PANTHERCOVE_X) to SST support list by adding to isst_cpu_ids. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20241003215554.3013807-2-srinivas.pandruvada@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-10-06platform/x86:intel/pmc: Disable ACPI PM Timer disabling on Sky and Kaby LakeHans de Goede
There have been multiple reports that the ACPI PM Timer disabling is causing Sky and Kaby Lake systems to hang on all suspend (s2idle, s3, hibernate) methods. Remove the acpi_pm_tmr_ctl_offset and acpi_pm_tmr_disable_bit settings from spt_reg_map to disable the ACPI PM Timer disabling on Sky and Kaby Lake to fix the hang on suspend. Fixes: e86c8186d03a ("platform/x86:intel/pmc: Enable the ACPI PM Timer to be turned off when suspended") Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Closes: https://lore.kernel.org/linux-pm/18784f62-91ff-4d88-9621-6c88eb0af2b5@molgen.mpg.de/ Reported-by: Todd Brandt <todd.e.brandt@intel.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219346 Cc: Marek Maslanka <mmaslanka@google.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Todd Brandt <todd.e.brandt@intel.com> Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> # Dell XPS 13 9360/0596KF Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20241003202614.17181-2-hdegoede@redhat.com
2024-10-06platform/x86: dell-laptop: Do not fail when encountering unsupported batteriesArmin Wolf
If the battery hook encounters a unsupported battery, it will return an error. This in turn will cause the battery driver to automatically unregister the battery hook. On machines with multiple batteries however, this will prevent the battery hook from handling the primary battery, since it will always get unregistered upon encountering one of the unsupported batteries. Fix this by simply ignoring unsupported batteries. Reviewed-by: Pali Rohár <pali@kernel.org> Fixes: ab58016c68cc ("platform/x86:dell-laptop: Add knobs to change battery charge settings") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20241001212835.341788-4-W_Armin@gmx.de Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-10-05platform/x86: ISST: Fix the KASAN report slab-out-of-bounds bugZach Wade
Attaching SST PCI device to VM causes "BUG: KASAN: slab-out-of-bounds". kasan report: [ 19.411889] ================================================================== [ 19.413702] BUG: KASAN: slab-out-of-bounds in _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.415634] Read of size 8 at addr ffff888829e65200 by task cpuhp/16/113 [ 19.417368] [ 19.418627] CPU: 16 PID: 113 Comm: cpuhp/16 Tainted: G E 6.9.0 #10 [ 19.420435] Hardware name: VMware, Inc. VMware20,1/440BX Desktop Reference Platform, BIOS VMW201.00V.20192059.B64.2207280713 07/28/2022 [ 19.422687] Call Trace: [ 19.424091] <TASK> [ 19.425448] dump_stack_lvl+0x5d/0x80 [ 19.426963] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.428694] print_report+0x19d/0x52e [ 19.430206] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 19.431837] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.433539] kasan_report+0xf0/0x170 [ 19.435019] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.436709] _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.438379] ? __pfx_sched_clock_cpu+0x10/0x10 [ 19.439910] isst_if_cpu_online+0x406/0x58f [isst_if_common] [ 19.441573] ? __pfx_isst_if_cpu_online+0x10/0x10 [isst_if_common] [ 19.443263] ? ttwu_queue_wakelist+0x2c1/0x360 [ 19.444797] cpuhp_invoke_callback+0x221/0xec0 [ 19.446337] cpuhp_thread_fun+0x21b/0x610 [ 19.447814] ? __pfx_cpuhp_thread_fun+0x10/0x10 [ 19.449354] smpboot_thread_fn+0x2e7/0x6e0 [ 19.450859] ? __pfx_smpboot_thread_fn+0x10/0x10 [ 19.452405] kthread+0x29c/0x350 [ 19.453817] ? __pfx_kthread+0x10/0x10 [ 19.455253] ret_from_fork+0x31/0x70 [ 19.456685] ? __pfx_kthread+0x10/0x10 [ 19.458114] ret_from_fork_asm+0x1a/0x30 [ 19.459573] </TASK> [ 19.460853] [ 19.462055] Allocated by task 1198: [ 19.463410] kasan_save_stack+0x30/0x50 [ 19.464788] kasan_save_track+0x14/0x30 [ 19.466139] __kasan_kmalloc+0xaa/0xb0 [ 19.467465] __kmalloc+0x1cd/0x470 [ 19.468748] isst_if_cdev_register+0x1da/0x350 [isst_if_common] [ 19.470233] isst_if_mbox_init+0x108/0xff0 [isst_if_mbox_msr] [ 19.471670] do_one_initcall+0xa4/0x380 [ 19.472903] do_init_module+0x238/0x760 [ 19.474105] load_module+0x5239/0x6f00 [ 19.475285] init_module_from_file+0xd1/0x130 [ 19.476506] idempotent_init_module+0x23b/0x650 [ 19.477725] __x64_sys_finit_module+0xbe/0x130 [ 19.476506] idempotent_init_module+0x23b/0x650 [ 19.477725] __x64_sys_finit_module+0xbe/0x130 [ 19.478920] do_syscall_64+0x82/0x160 [ 19.480036] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 19.481292] [ 19.482205] The buggy address belongs to the object at ffff888829e65000 which belongs to the cache kmalloc-512 of size 512 [ 19.484818] The buggy address is located 0 bytes to the right of allocated 512-byte region [ffff888829e65000, ffff888829e65200) [ 19.487447] [ 19.488328] The buggy address belongs to the physical page: [ 19.489569] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888829e60c00 pfn:0x829e60 [ 19.491140] head: order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 19.492466] anon flags: 0x57ffffc0000840(slab|head|node=1|zone=2|lastcpupid=0x1fffff) [ 19.493914] page_type: 0xffffffff() [ 19.494988] raw: 0057ffffc0000840 ffff88810004cc80 0000000000000000 0000000000000001 [ 19.496451] raw: ffff888829e60c00 0000000080200018 00000001ffffffff 0000000000000000 [ 19.497906] head: 0057ffffc0000840 ffff88810004cc80 0000000000000000 0000000000000001 [ 19.499379] head: ffff888829e60c00 0000000080200018 00000001ffffffff 0000000000000000 [ 19.500844] head: 0057ffffc0000003 ffffea0020a79801 ffffea0020a79848 00000000ffffffff [ 19.502316] head: 0000000800000000 0000000000000000 00000000ffffffff 0000000000000000 [ 19.503784] page dumped because: kasan: bad access detected [ 19.505058] [ 19.505970] Memory state around the buggy address: [ 19.507172] ffff888829e65100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 19.508599] ffff888829e65180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 19.510013] >ffff888829e65200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 19.510014] ^ [ 19.510016] ffff888829e65280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 19.510018] ffff888829e65300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 19.515367] ================================================================== The reason for this error is physical_package_ids assigned by VMware VMM are not continuous and have gaps. This will cause value returned by topology_physical_package_id() to be more than topology_max_packages(). Here the allocation uses topology_max_packages(). The call to topology_max_packages() returns maximum logical package ID not physical ID. Hence use topology_logical_package_id() instead of topology_physical_package_id(). Fixes: 9a1aac8a96dc ("platform/x86: ISST: PUNIT device mapping with Sub-NUMA clustering") Cc: stable@vger.kernel.org Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zach Wade <zachwade.k@gmail.com> Link: https://lore.kernel.org/r/20240923144508.1764-1-zachwade.k@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-10-03platform/x86/intel/pmt: Correct the typo 'ACCCESS_LOCAL'WangYuli
There is a spelling mistake of 'ACCCESS_LOCAL' which should be 'ACCESS_LOCAL'. Cc: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: WangYuli <wangyuli@uniontech.com> Link: https://lore.kernel.org/r/4F742FFF72DFD84F+20240920141704.34373-1-wangyuli@uniontech.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-10-02move asm/unaligned.h to linux/unaligned.hAl Viro
asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
2024-09-29Input: novatek-nvt-ts - replace generic i2c device id with specific IC variantJoel Selvaraj
This is done in preparation to introduce other variants of the Novatek NVT touchscreen controller that can be supported by the driver. Signed-off-by: Joel Selvaraj <joelselvaraj.oss@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240601-nvt-ts-devicetree-regulator-support-v5-1-aa9bf986347d@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-09-19Merge tag 'platform-drivers-x86-v6.12-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform drivers updates from Hans de Goede: - asus-wmi: Add support for vivobook fan profiles - dell-laptop: Add knobs to change battery charge settings - lg-laptop: Add operation region support - intel-uncore-freq: Add support for efficiency latency control - intel/ifs: Add SBAF test support - intel/pmc: Ignore all LTRs during suspend - platform/surface: Support for arm64 based Surface devices - wmi: Pass event data directly to legacy notify handlers - x86/platform/geode: switch GPIO buttons and LEDs to software properties - bunch of small cleanups, fixes, hw-id additions, etc. * tag 'platform-drivers-x86-v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (65 commits) MAINTAINERS: adjust file entry in INTEL MID PLATFORM platform/x86: x86-android-tablets: Adjust Xiaomi Pad 2 bottom bezel touch buttons LED platform/mellanox: mlxbf-pmc: fix lockdep warning platform/x86/amd: pmf: Add quirk for TUF Gaming A14 platform/x86: touchscreen_dmi: add nanote-next quirk platform/x86: asus-wmi: don't fail if platform_profile already registered platform/x86: asus-wmi: add debug print in more key places platform/x86: intel_scu_wdt: Move intel_scu_wdt.h to x86 subfolder platform/x86: intel_scu_ipc: Move intel_scu_ipc.h out of arch/x86/include/asm MAINTAINERS: Add Intel MID section platform/x86: panasonic-laptop: Add support for programmable buttons platform/olpc: Remove redundant null pointer checks in olpc_ec_setup_debugfs() platform/x86: intel/pmc: Ignore all LTRs during suspend platform/x86: wmi: Call both legacy and WMI driver notify handlers platform/x86: wmi: Merge get_event_data() with wmi_get_notify_data() platform/x86: wmi: Remove wmi_get_event_data() platform/x86: wmi: Pass event data directly to legacy notify handlers platform/x86: thinkpad_acpi: Fix uninitialized symbol 's' warning platform/x86: x86-android-tablets: Fix spelling in the comments platform/x86: ideapad-laptop: Make the scope_guard() clear of its scope ...
2024-09-17Merge tag 'timers-core-2024-09-16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "Core: - Overhaul of posix-timers in preparation of removing the workaround for periodic timers which have signal delivery ignored. - Remove the historical extra jiffie in msleep() msleep() adds an extra jiffie to the timeout value to ensure minimal sleep time. The timer wheel ensures minimal sleep time since the large rewrite to a non-cascading wheel, but the extra jiffie in msleep() remained unnoticed. Remove it. - Make the timer slack handling correct for realtime tasks. The procfs interface is inconsistent and does neither reflect reality nor conforms to the man page. Show the correct 0 slack for real time tasks and enforce it at the core level instead of having inconsistent individual checks in various timer setup functions. - The usual set of updates and enhancements all over the place. Drivers: - Allow the ACPI PM timer to be turned off during suspend - No new drivers - The usual updates and enhancements in various drivers" * tag 'timers-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits) ntp: Make sure RTC is synchronized when time goes backwards treewide: Fix wrong singular form of jiffies in comments cpu: Use already existing usleep_range() timers: Rename next_expiry_recalc() to be unique platform/x86:intel/pmc: Fix comment for the pmc_core_acpi_pm_timer_suspend_resume function clocksource/drivers/jcore: Use request_percpu_irq() clocksource/drivers/cadence-ttc: Add missing clk_disable_unprepare in ttc_setup_clockevent clocksource/drivers/asm9260: Add missing clk_disable_unprepare in asm9260_timer_init clocksource/drivers/qcom: Add missing iounmap() on errors in msm_dt_timer_init() clocksource/drivers/ingenic: Use devm_clk_get_enabled() helpers platform/x86:intel/pmc: Enable the ACPI PM Timer to be turned off when suspended clocksource: acpi_pm: Add external callback for suspend/resume clocksource/drivers/arm_arch_timer: Using for_each_available_child_of_node_scoped() dt-bindings: timer: rockchip: Add rk3576 compatible timers: Annotate possible non critical data race of next_expiry timers: Remove historical extra jiffie for timeout in msleep() hrtimer: Use and report correct timerslack values for realtime tasks hrtimer: Annotate hrtimer_cpu_base_.*_expiry() for sparse. timers: Add sparse annotation for timer_sync_wait_running(). signal: Replace BUG_ON()s ...
2024-09-16platform/x86: x86-android-tablets: Adjust Xiaomi Pad 2 bottom bezel touch ↵Hans de Goede
buttons LED The "input-events" LED trigger used to turn on the backlight LEDs had to be rewritten to use led_trigger_register_simple() + led_trigger_event() to fix a serious locking issue. This means it no longer supports using blink_brightness to set a per LED brightness for the trigger and it no longer sets LED_CORE_SUSPENDRESUME. Adjust the MiPad 2 bottom bezel touch buttons LED class device to match: 1. Make LED_FULL the maximum brightness to fix the LED brightness being very low when on. 2. Set flags = LED_CORE_SUSPENDRESUME. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240916090255.35548-1-hdegoede@redhat.com
2024-09-16Merge tag 'thermal-6.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control updates from Rafael Wysocki: "These mostly continue to rework the thermal core and the thermal zone driver interface to make the code more straightforward and reduce bloat The most significant piece of this work is a change of the code related to binding cooling devices to thermal zones which, among other things, replaces two previously existing thermal zone operations with one allowing driver implementations to be much simpler There is also a new thermal core testing module allowing mock thermal zones to be created and controlled via debugfs in order to exercise the thermal core functionality. It is expected to be used for implementing thermal core self tests in the future Apart from the above, there are assorted thermal driver updates Specifics: - Update some thermal drivers to eliminate thermal_zone_get_trip() calls from them and get rid of that function (Rafael Wysocki) - Update the thermal sysfs code to store trip point attributes in trip descriptors and get to trip points via attribute pointers (Rafael Wysocki) - Move the computation of the low and high boundaries for thermal_zone_set_trips() to __thermal_zone_device_update() (Daniel Lezcano) - Introduce a debugfs-based facility for thermal core testing (Rafael Wysocki) - Replace the thermal zone .bind() and .unbind() callbacks for binding cooling devices to thermal zones with one .should_bind() callback used for deciding whether or not a given cooling devices should be bound to a given trip point in a given thermal zone (Rafael Wysocki) - Eliminate code that has no more users after the other changes, drop some redundant checks from the thermal core and clean it up (Rafael Wysocki) - Fix rounding of delay jiffies in the thermal core (Rafael Wysocki) - Refuse to accept trip point temperature or hysteresis that would lead to an invalid threshold value when setting them via sysfs (Rafael Wysocki) - Adjust states of all uninitialized instances in the .manage() callback of the Bang-bang thermal governor (Rafael Wysocki) - Drop a couple of redundant checks along with the code depending on them from the thermal core (Rafael Wysocki) - Rearrange the thermal core to avoid redundant checks and simplify control flow in a couple of code paths (Rafael Wysocki) - Add power domain DT bindings for new Amlogic SoCs (Georges Stark) - Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() in the ST driver and add a Kconfig dependency on THERMAL_OF subsystem for the STi driver (Raphael Gallais-Pou) - Simplify the error code path in the probe functions in the brcmstb driver with the helo of dev_err_probe() (Yan Zhen) - Make imx_sc_thermal use dev_err_probe() (Alexander Stein) - Remove trailing space after \n newline in the Renesas driver (Colin Ian King) - Add DT binding compatible string for the SA8255p to the tsens thermal driver (Nikunj Kela) - Use the devm_clk_get_enabled() helpers to simplify the init routine in the sprd thermal driver (Huan Yang) - Remove __maybe_unused notations for the functions by using the new RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros on the IMx and Qoriq drivers (Fabio Estevam) - Remove unused declarations from the ti-soc-thermal driver's header file as the functions in question were removed previously (Zhang Zekun)" * tag 'thermal-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (48 commits) thermal: core: Drop thermal_zone_device_is_enabled() thermal: core: Check passive delay in monitor_thermal_zone() thermal: core: Drop dead code from monitor_thermal_zone() thermal: core: Drop redundant lockdep_assert_held() thermal: gov_bang_bang: Adjust states of all uninitialized instances thermal: sysfs: Add sanity checks for trip temperature and hysteresis thermal/drivers/imx_sc_thermal: Use dev_err_probe thermal/drivers/ti-soc-thermal: Remove unused declarations thermal/drivers/imx: Remove __maybe_unused notations thermal/drivers/qoriq: Remove __maybe_unused notations thermal/drivers/sprd: Use devm_clk_get_enabled() helpers dt-bindings: thermal: tsens: document support on SA8255p thermal/drivers/renesas: Remove trailing space after \n newline thermal/drivers/brcmstb_thermal: Simplify with dev_err_probe() thermal/drivers/sti: Depend on THERMAL_OF subsystem thermal/drivers/st: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() dt-bindings: thermal: amlogic,thermal: add optional power-domains thermal: core: Drop tz field from struct thermal_instance thermal: core: Drop redundant checks from thermal_bind_cdev_to_trip() thermal: core: Rename cdev-to-thermal-zone bind/unbind functions ...
generated by cgit v1.2.3 (git 2.25.1) at 2025-04-13 05:41:34 +0000