summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2024-01-19net: can: Use device_get_match_data()Rob Herring
Use preferred device_get_match_data() instead of of_match_device() to get the driver match data. With this, adjust the includes to explicitly include the correct headers. Error checking for matching and match data was not necessary as matching is always successful if we're already in probe and the match tables always have data pointers. Signed-off-by: Rob Herring <robh@kernel.org>
2024-01-18Merge tag 'net-6.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf and netfilter. Previous releases - regressions: - Revert "net: rtnetlink: Enslave device before bringing it up", breaks the case inverse to the one it was trying to fix - net: dsa: fix oob access in DSA's netdevice event handler dereference netdev_priv() before check its a DSA port - sched: track device in tcf_block_get/put_ext() only for clsact binder types - net: tls, fix WARNING in __sk_msg_free when record becomes full during splice and MORE hint set - sfp-bus: fix SFP mode detect from bitrate - drv: stmmac: prevent DSA tags from breaking COE Previous releases - always broken: - bpf: fix no forward progress in in bpf_iter_udp if output buffer is too small - bpf: reject variable offset alu on registers with a type of PTR_TO_FLOW_KEYS to prevent oob access - netfilter: tighten input validation - net: add more sanity check in virtio_net_hdr_to_skb() - rxrpc: fix use of Don't Fragment flag on RESPONSE packets, avoid infinite loop - amt: do not use the portion of skb->cb area which may get clobbered - mptcp: improve validation of the MPTCPOPT_MP_JOIN MCTCP option Misc: - spring cleanup of inactive maintainers" * tag 'net-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits) i40e: Include types.h to some headers ipv6: mcast: fix data-race in ipv6_mc_down / mld_ifc_work selftests: mlxsw: qos_pfc: Adjust the test to support 8 lanes selftests: mlxsw: qos_pfc: Remove wrong description mlxsw: spectrum_router: Register netdevice notifier before nexthop mlxsw: spectrum_acl_tcam: Fix stack corruption mlxsw: spectrum_acl_tcam: Fix NULL pointer dereference in error path mlxsw: spectrum_acl_erp: Fix error flow of pool allocation failure ethtool: netlink: Add missing ethnl_ops_begin/complete selftests: bonding: Add more missing config options selftests: netdevsim: add a config file libbpf: warn on unexpected __arg_ctx type when rewriting BTF selftests/bpf: add tests confirming type logic in kernel for __arg_ctx bpf: enforce types for __arg_ctx-tagged arguments in global subprogs bpf: extract bpf_ctx_convert_map logic and make it more reusable libbpf: feature-detect arg:ctx tag support in kernel ipvs: avoid stat macros calls from preemptible context netfilter: nf_tables: reject NFT_SET_CONCAT with not field length description netfilter: nf_tables: skip dead set elements in netlink dump netfilter: nf_tables: do not allow mismatch field size and set key length ...
2024-01-18Merge tag 'usb-6.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt changes for 6.8-rc1. Included in here are the following: - Thunderbolt subsystem and driver updates for USB 4 hardware and issues reported by real devices - xhci driver updates - dwc3 driver updates - uvc_video gadget driver updates - typec driver updates - gadget string functions cleaned up - other small changes All of these have been in the linux-next tree for a while with no reported issues" * tag 'usb-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits) usb: typec: tipd: fix use of device-specific init function usb: typec: tipd: Separate reset for TPS6598x usb: mon: Fix atomicity violation in mon_bin_vma_fault usb: gadget: uvc: Remove nested locking usb: gadget: uvc: Fix use are free during STREAMOFF usb: typec: class: fix typec_altmode_put_partner to put plugs dt-bindings: usb: dwc3: Limit num-hc-interrupters definition dt-bindings: usb: xhci: Add num-hc-interrupters definition xhci: add support to allocate several interrupters USB: core: Use device_driver directly in struct usb_driver and usb_device_driver arm64: dts: mediatek: mt8195: Add 'rx-fifo-depth' for cherry usb: xhci-mtk: fix a short packet issue of gen1 isoc-in transfer dt-bindings: usb: mtk-xhci: add a property for Gen1 isoc-in transfer issue arm64: dts: qcom: msm8996: Remove PNoC clock from MSS arm64: dts: qcom: msm8996: Remove AGGRE2 clock from SLPI arm64: dts: qcom: msm8998: Remove AGGRE2 clock from SLPI arm64: dts: qcom: msm8939: Drop RPM bus clocks arm64: dts: qcom: sdm630: Drop RPM bus clocks arm64: dts: qcom: qcs404: Drop RPM bus clocks arm64: dts: qcom: msm8996: Drop RPM bus clocks ...
2024-01-18Merge tag 'tty-6.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial updates from Greg KH: "Here is the big set of tty and serial driver changes for 6.8-rc1. As usual, Jiri has a bunch of refactoring and cleanups for the tty core and drivers in here, along with the usual set of rs485 updates (someday this might work properly...) Along with those, in here are changes for: - sc16is7xx serial driver updates - platform driver removal api updates - amba-pl011 driver updates - tty driver binding updates - other small tty/serial driver updates and changes All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (197 commits) serial: sc16is7xx: refactor EFR lock serial: sc16is7xx: reorder code to remove prototype declarations serial: sc16is7xx: refactor FIFO access functions to increase commonality serial: sc16is7xx: drop unneeded MODULE_ALIAS serial: sc16is7xx: replace hardcoded divisor value with BIT() macro serial: sc16is7xx: add explicit return for some switch default cases serial: sc16is7xx: add macro for max number of UART ports serial: sc16is7xx: add driver name to struct uart_driver serial: sc16is7xx: use i2c_get_match_data() serial: sc16is7xx: use spi_get_device_match_data() serial: sc16is7xx: use DECLARE_BITMAP for sc16is7xx_lines bitfield serial: sc16is7xx: improve do/while loop in sc16is7xx_irq() serial: sc16is7xx: remove obsolete loop in sc16is7xx_port_irq() serial: sc16is7xx: set safe default SPI clock frequency serial: sc16is7xx: add check for unsupported SPI modes during probe serial: sc16is7xx: fix invalid sc16is7xx_lines bitfield in case of probe error serial: 8250_exar: Set missing rs485_supported flag serial: omap: do not override settings for RS485 support serial: core, imx: do not set RS485 enabled if it is not supported serial: core: make sure RS485 cannot be enabled when it is not supported ...
2024-01-18i40e: Include types.h to some headersTony Nguyen
Commit 56df345917c0 ("i40e: Remove circular header dependencies and fix headers") redistributed a number of includes from one large header file to the locations they were needed. In some environments, types.h is not included and causing compile issues. The driver should not rely on implicit inclusion from other locations; explicitly include it to these files. Snippet of issue. Entire log can be seen through the Closes: link. In file included from drivers/net/ethernet/intel/i40e/i40e_diag.h:7, from drivers/net/ethernet/intel/i40e/i40e_diag.c:4: drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h:33:9: error: unknown type name '__le16' 33 | __le16 flags; | ^~~~~~ drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h:34:9: error: unknown type name '__le16' 34 | __le16 opcode; | ^~~~~~ ... drivers/net/ethernet/intel/i40e/i40e_diag.h:22:9: error: unknown type name 'u32' 22 | u32 elements; /* number of elements if array */ | ^~~ drivers/net/ethernet/intel/i40e/i40e_diag.h:23:9: error: unknown type name 'u32' 23 | u32 stride; /* bytes between each element */ Reported-by: Martin Zaharinov <micron10@gmail.com> Closes: https://lore.kernel.org/netdev/21BBD62A-F874-4E42-B347-93087EEA8126@gmail.com/ Fixes: 56df345917c0 ("i40e: Remove circular header dependencies and fix headers") Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240117172534.3555162-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-18mlxsw: spectrum_router: Register netdevice notifier before nexthopPetr Machata
If there are IPIP nexthops at the time when the driver is loaded (or the devlink instance reloaded), the driver looks up the corresponding IPIP entry. But IPIP entries are only created as a result of netdevice notifications. Since the netdevice notifier is registered after the nexthop notifier, mlxsw_sp_nexthop_type_init() never finds the IPIP entry, registers the nexthop MLXSW_SP_NEXTHOP_TYPE_ETH, and fails to assign a CRIF to the nexthop. Later on when the CRIF is necessary, the WARN_ON in mlxsw_sp_nexthop_rif() triggers, causing the splat [1]. In order to fix the issue, reorder the netdevice notifier to be registered before the nexthop one. [1] (edited for clarity): WARNING: CPU: 1 PID: 1364 at drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:3245 mlxsw_sp_nexthop_rif (drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:3246 (discriminator 1)) mlxsw_spectrum Hardware name: Mellanox Technologies Ltd. MSN4410/VMOD0010, BIOS 5.11 01/06/2019 Call Trace: ? mlxsw_sp_nexthop_rif (drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:3246 (discriminator 1)) mlxsw_spectrum __mlxsw_sp_nexthop_eth_update (drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:3637) mlxsw_spectrum mlxsw_sp_nexthop_update (drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:3679 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:3727) mlxsw_spectrum mlxsw_sp_nexthop_group_update (drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:3757) mlxsw_spectrum mlxsw_sp_nexthop_group_refresh (drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:4112) mlxsw_spectrum mlxsw_sp_nexthop_obj_event (drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:5118 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:5191 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:5315 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:5500) mlxsw_spectrum nexthops_dump (net/ipv4/nexthop.c:217 net/ipv4/nexthop.c:440 net/ipv4/nexthop.c:3609) register_nexthop_notifier (net/ipv4/nexthop.c:3624) mlxsw_sp_router_init (drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:11486) mlxsw_spectrum mlxsw_sp_init (drivers/net/ethernet/mellanox/mlxsw/spectrum.c:3267) mlxsw_spectrum __mlxsw_core_bus_device_register (drivers/net/ethernet/mellanox/mlxsw/core.c:2202) mlxsw_core mlxsw_devlink_core_bus_device_reload_up (drivers/net/ethernet/mellanox/mlxsw/core.c:2265 drivers/net/ethernet/mellanox/mlxsw/core.c:1603) mlxsw_core devlink_reload (net/devlink/dev.c:314 net/devlink/dev.c:475) [...] Fixes: 9464a3d68ea9 ("mlxsw: spectrum_router: Track next hops at CRIFs") Reported-by: Maksym Yaremchuk <maksymy@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/74edb8d45d004e8d8f5318eede6ccc3d786d8ba9.1705502064.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-18mlxsw: spectrum_acl_tcam: Fix stack corruptionIdo Schimmel
When tc filters are first added to a net device, the corresponding local port gets bound to an ACL group in the device. The group contains a list of ACLs. In turn, each ACL points to a different TCAM region where the filters are stored. During forwarding, the ACLs are sequentially evaluated until a match is found. One reason to place filters in different regions is when they are added with decreasing priorities and in an alternating order so that two consecutive filters can never fit in the same region because of their key usage. In Spectrum-2 and newer ASICs the firmware started to report that the maximum number of ACLs in a group is more than 16, but the layout of the register that configures ACL groups (PAGT) was not updated to account for that. It is therefore possible to hit stack corruption [1] in the rare case where more than 16 ACLs in a group are required. Fix by limiting the maximum ACL group size to the minimum between what the firmware reports and the maximum ACLs that fit in the PAGT register. Add a test case to make sure the machine does not crash when this condition is hit. [1] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: mlxsw_sp_acl_tcam_group_update+0x116/0x120 [...] dump_stack_lvl+0x36/0x50 panic+0x305/0x330 __stack_chk_fail+0x15/0x20 mlxsw_sp_acl_tcam_group_update+0x116/0x120 mlxsw_sp_acl_tcam_group_region_attach+0x69/0x110 mlxsw_sp_acl_tcam_vchunk_get+0x492/0xa20 mlxsw_sp_acl_tcam_ventry_add+0x25/0xe0 mlxsw_sp_acl_rule_add+0x47/0x240 mlxsw_sp_flower_replace+0x1a9/0x1d0 tc_setup_cb_add+0xdc/0x1c0 fl_hw_replace_filter+0x146/0x1f0 fl_change+0xc17/0x1360 tc_new_tfilter+0x472/0xb90 rtnetlink_rcv_msg+0x313/0x3b0 netlink_rcv_skb+0x58/0x100 netlink_unicast+0x244/0x390 netlink_sendmsg+0x1e4/0x440 ____sys_sendmsg+0x164/0x260 ___sys_sendmsg+0x9a/0xe0 __sys_sendmsg+0x7a/0xc0 do_syscall_64+0x40/0xe0 entry_SYSCALL_64_after_hwframe+0x63/0x6b Fixes: c3ab435466d5 ("mlxsw: spectrum: Extend to support Spectrum-2 ASIC") Reported-by: Orel Hagag <orelh@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/2d91c89afba59c22587b444994ae419dbea8d876.1705502064.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-18mlxsw: spectrum_acl_tcam: Fix NULL pointer dereference in error pathIdo Schimmel
When calling mlxsw_sp_acl_tcam_region_destroy() from an error path after failing to attach the region to an ACL group, we hit a NULL pointer dereference upon 'region->group->tcam' [1]. Fix by retrieving the 'tcam' pointer using mlxsw_sp_acl_to_tcam(). [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] RIP: 0010:mlxsw_sp_acl_tcam_region_destroy+0xa0/0xd0 [...] Call Trace: mlxsw_sp_acl_tcam_vchunk_get+0x88b/0xa20 mlxsw_sp_acl_tcam_ventry_add+0x25/0xe0 mlxsw_sp_acl_rule_add+0x47/0x240 mlxsw_sp_flower_replace+0x1a9/0x1d0 tc_setup_cb_add+0xdc/0x1c0 fl_hw_replace_filter+0x146/0x1f0 fl_change+0xc17/0x1360 tc_new_tfilter+0x472/0xb90 rtnetlink_rcv_msg+0x313/0x3b0 netlink_rcv_skb+0x58/0x100 netlink_unicast+0x244/0x390 netlink_sendmsg+0x1e4/0x440 ____sys_sendmsg+0x164/0x260 ___sys_sendmsg+0x9a/0xe0 __sys_sendmsg+0x7a/0xc0 do_syscall_64+0x40/0xe0 entry_SYSCALL_64_after_hwframe+0x63/0x6b Fixes: 22a677661f56 ("mlxsw: spectrum: Introduce ACL core with simple TCAM implementation") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/fb6a4542bbc9fcab5a523802d97059bffbca7126.1705502064.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-18mlxsw: spectrum_acl_erp: Fix error flow of pool allocation failureAmit Cohen
Lately, a bug was found when many TC filters are added - at some point, several bugs are printed to dmesg [1] and the switch is crashed with segmentation fault. The issue starts when gen_pool_free() fails because of unexpected behavior - a try to free memory which is already freed, this leads to BUG() call which crashes the switch and makes many other bugs. Trying to track down the unexpected behavior led to a bug in eRP code. The function mlxsw_sp_acl_erp_table_alloc() gets a pointer to the allocated index, sets the value and returns an error code. When gen_pool_alloc() fails it returns address 0, we track it and return -ENOBUFS outside, BUT the call for gen_pool_alloc() already override the index in erp_table structure. This is a problem when such allocation is done as part of table expansion. This is not a new table, which will not be used in case of allocation failure. We try to expand eRP table and override the current index (non-zero) with zero. Then, it leads to an unexpected behavior when address 0 is freed twice. Note that address 0 is valid in erp_table->base_index and indeed other tables use it. gen_pool_alloc() fails in case that there is no space left in the pre-allocated pool, in our case, the pool is limited to ACL_MAX_ERPT_BANK_SIZE, which is read from hardware. When more than max erp entries are required, we exceed the limit and return an error, this error leads to "Failed to migrate vregion" print. Fix this by changing erp_table->base_index only in case of a successful allocation. Add a test case for such a scenario. Without this fix it causes segmentation fault: $ TESTS="max_erp_entries_test" ./tc_flower.sh ./tc_flower.sh: line 988: 1560 Segmentation fault tc filter del dev $h2 ingress chain $i protocol ip pref $i handle $j flower &>/dev/null [1]: kernel BUG at lib/genalloc.c:508! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 6 PID: 3531 Comm: tc Not tainted 6.7.0-rc5-custom-ga6893f479f5e #1 Hardware name: Mellanox Technologies Ltd. MSN4700/VMOD0010, BIOS 5.11 07/12/2021 RIP: 0010:gen_pool_free_owner+0xc9/0xe0 ... Call Trace: <TASK> __mlxsw_sp_acl_erp_table_other_dec+0x70/0xa0 [mlxsw_spectrum] mlxsw_sp_acl_erp_mask_destroy+0xf5/0x110 [mlxsw_spectrum] objagg_obj_root_destroy+0x18/0x80 [objagg] objagg_obj_destroy+0x12c/0x130 [objagg] mlxsw_sp_acl_erp_mask_put+0x37/0x50 [mlxsw_spectrum] mlxsw_sp_acl_ctcam_region_entry_remove+0x74/0xa0 [mlxsw_spectrum] mlxsw_sp_acl_ctcam_entry_del+0x1e/0x40 [mlxsw_spectrum] mlxsw_sp_acl_tcam_ventry_del+0x78/0xd0 [mlxsw_spectrum] mlxsw_sp_flower_destroy+0x4d/0x70 [mlxsw_spectrum] mlxsw_sp_flow_block_cb+0x73/0xb0 [mlxsw_spectrum] tc_setup_cb_destroy+0xc1/0x180 fl_hw_destroy_filter+0x94/0xc0 [cls_flower] __fl_delete+0x1ac/0x1c0 [cls_flower] fl_destroy+0xc2/0x150 [cls_flower] tcf_proto_destroy+0x1a/0xa0 ... mlxsw_spectrum3 0000:07:00.0: Failed to migrate vregion mlxsw_spectrum3 0000:07:00.0: Failed to migrate vregion Fixes: f465261aa105 ("mlxsw: spectrum_acl: Implement common eRP core") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/4cfca254dfc0e5d283974801a24371c7b6db5989.1705502064.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-17Merge tag 'pci-v6.8-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Reserve ECAM so we don't assign it to PCI BARs; this works around bugs where BIOS included ECAM in a PNP0A03 host bridge window, didn't reserve it via a PNP0C02 motherboard device, and didn't allocate space for SR-IOV VF BARs (Bjorn Helgaas) - Add MMCONFIG/ECAM debug logging (Bjorn Helgaas) - Rename 'MMCONFIG' to 'ECAM' to match spec usage (Bjorn Helgaas) - Log device type (Root Port, Switch Port, etc) during enumeration (Bjorn Helgaas) - Log bridges before downstream devices so the dmesg order is more logical (Bjorn Helgaas) - Log resource names (BAR 0, VF BAR 0, bridge window, etc) consistently instead of a mix of names and "reg 0x10" (Puranjay Mohan, Bjorn Helgaas) - Fix 64GT/s effective data rate calculation to use 1b/1b encoding rather than the 8b/10b or 128b/130b used by lower rates (Ilpo Järvinen) - Use PCI_HEADER_TYPE_* instead of literals in x86, powerpc, SCSI lpfc (Ilpo Järvinen) - Clean up open-coded PCIBIOS return code mangling (Ilpo Järvinen) Resource management: - Restructure pci_dev_for_each_resource() to avoid computing the address of an out-of-bounds array element (the bounds check was performed later so the element was never actually *read*, but it's nicer to avoid even computing an out-of-bounds address) (Andy Shevchenko) Driver binding: - Convert pci-host-common.c platform .remove() callback to .remove_new() returning 'void' since it's not useful to return error codes here (Uwe Kleine-König) - Convert exynos, keystone, kirin from .remove() to .remove_new(), which returns void instead of int (Uwe Kleine-König) - Drop unused struct pci_driver.node member (Mathias Krause) Virtualization: - Add ACS quirk for more Zhaoxin Root Ports (LeoLiuoc) Error handling: - Log AER errors as "Correctable" (not "Corrected") or "Uncorrectable" to match spec terminology (Bjorn Helgaas) - Decode Requester ID when no error info found instead of printing the raw hex value (Bjorn Helgaas) Endpoint framework: - Use a unique test pattern for each BAR in the pci_endpoint_test to make it easier to debug address translation issues (Niklas Cassel) Broadcom STB PCIe controller driver: - Add DT property "brcm,clkreq-mode" and driver support for different CLKREQ# modes to make ASPM L1.x states possible (Jim Quinlan) Freescale Layerscape PCIe controller driver: - Add suspend/resume support for Layerscape LS1043a and LS1021a, including software-managed PME_Turn_Off and transitions between L0, L2/L3_Ready Link states (Frank Li) MediaTek PCIe controller driver: - Clear MSI interrupt status before handler to avoid missing MSIs that occur after the handler (qizhong cheng) MediaTek PCIe Gen3 controller driver: - Update mediatek-gen3 translation window setup to handle MMIO space that is not a power of two in size (Jianjun Wang) Qualcomm PCIe controller driver: - Increase qcom iommu-map maxItems to accommodate SDX55 (five entries) and SDM845 (sixteen entries) (Krzysztof Kozlowski) - Describe qcom,pcie-sc8180x clocks and resets accurately (Krzysztof Kozlowski) - Describe qcom,pcie-sm8150 clocks and resets accurately (Krzysztof Kozlowski) - Correct the qcom "reset-name" property, previously incorrectly called "reset-names" (Krzysztof Kozlowski) - Document qcom,pcie-sm8650, based on qcom,pcie-sm8550 (Neil Armstrong) Renesas R-Car PCIe controller driver: - Replace of_device.h with explicit of.h include to untangle header usage (Rob Herring) - Add DT and driver support for optional miniPCIe 1.5v and 3.3v regulators on KingFisher (Wolfram Sang) SiFive FU740 PCIe controller driver: - Convert fu740 CONFIG_PCIE_FU740 dependency from SOC_SIFIVE to ARCH_SIFIVE (Conor Dooley) Synopsys DesignWare PCIe controller driver: - Align iATU mapping for endpoint MSI-X (Niklas Cassel) - Drop "host_" prefix from struct dw_pcie_host_ops members (Yoshihiro Shimoda) - Drop "ep_" prefix from struct dw_pcie_ep_ops members (Yoshihiro Shimoda) - Rename struct dw_pcie_ep_ops.func_conf_select() to .get_dbi_offset() to be more descriptive (Yoshihiro Shimoda) - Add Endpoint DBI accessors to encapsulate offset lookups (Yoshihiro Shimoda) TI J721E PCIe driver: - Add j721e DT and driver support for 'num-lanes' for devices that support x1, x2, or x4 Links (Matt Ranostay) - Add j721e DT compatible strings and driver support for j784s4 (Matt Ranostay) - Make TI J721E Kconfig depend on ARCH_K3 since the hardware is specific to those TI SoC parts (Peter Robinson) TI Keystone PCIe controller driver: - Hold power management references to all PHYs while enabling them to avoid a race when one provides clocks to others (Siddharth Vadapalli) Xilinx XDMA PCIe controller driver: - Remove redundant dev_err(), since platform_get_irq() and platform_get_irq_byname() already log errors (Yang Li) - Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq() (Krzysztof Wilczyński) - Fix xilinx_pl_dma_pcie_init_irq_domain() error return when irq_domain_add_linear() fails (Harshit Mogalapalli) MicroSemi Switchtec management driver: - Do dma_mrpc cleanup during switchtec_pci_remove() to match its devm ioremapping in switchtec_pci_probe(). Previously the cleanup was done in stdev_release(), which used stale pointers if stdev->cdev happened to be open when the PCI device was removed (Daniel Stodden) Miscellaneous: - Convert interrupt terminology from "legacy" to "INTx" to be more specific and match spec terminology (Damien Le Moal) - In dw-xdata-pcie, pci_endpoint_test, and vmd, replace usage of deprecated ida_simple_*() API with ida_alloc() and ida_free() (Christophe JAILLET)" * tag 'pci-v6.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits) PCI: Fix kernel-doc issues PCI: brcmstb: Configure HW CLKREQ# mode appropriate for downstream device dt-bindings: PCI: brcmstb: Add property "brcm,clkreq-mode" PCI: mediatek-gen3: Fix translation window size calculation PCI: mediatek: Clear interrupt status before dispatching handler PCI: keystone: Fix race condition when initializing PHYs PCI: xilinx-xdma: Fix error code in xilinx_pl_dma_pcie_init_irq_domain() PCI: xilinx-xdma: Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq() PCI: rcar-gen4: Fix -Wvoid-pointer-to-enum-cast error PCI: iproc: Fix -Wvoid-pointer-to-enum-cast warning PCI: dwc: Add dw_pcie_ep_{read,write}_dbi[2] helpers PCI: dwc: Rename .func_conf_select to .get_dbi_offset in struct dw_pcie_ep_ops PCI: dwc: Rename .ep_init to .init in struct dw_pcie_ep_ops PCI: dwc: Drop host prefix from struct dw_pcie_host_ops members misc: pci_endpoint_test: Use a unique test pattern for each BAR PCI: j721e: Make TI J721E depend on ARCH_K3 PCI: j721e: Add TI J784S4 PCIe configuration PCI/AER: Use explicit register sizes for struct members PCI/AER: Decode Requester ID when no error info found PCI/AER: Use 'Correctable' and 'Uncorrectable' spec terms for errors ...
2024-01-17net: netdevsim: don't try to destroy PHC on VFsJakub Kicinski
PHC gets initialized in nsim_init_netdevsim(), which is only called if (nsim_dev_port_is_pf()). Create a counterpart of nsim_init_netdevsim() and move the mock_phc_destroy() there. This fixes a crash trying to destroy netdevsim with VFs instantiated, as caught by running the devlink.sh test: BUG: kernel NULL pointer dereference, address: 00000000000000b8 RIP: 0010:mock_phc_destroy+0xd/0x30 Call Trace: <TASK> nsim_destroy+0x4a/0x70 [netdevsim] __nsim_dev_port_del+0x47/0x70 [netdevsim] nsim_dev_reload_destroy+0x105/0x120 [netdevsim] nsim_drv_remove+0x2f/0xb0 [netdevsim] device_release_driver_internal+0x1a1/0x210 bus_remove_device+0xd5/0x120 device_del+0x159/0x490 device_unregister+0x12/0x30 del_device_store+0x11a/0x1a0 [netdevsim] kernfs_fop_write_iter+0x130/0x1d0 vfs_write+0x30b/0x4b0 ksys_write+0x69/0xf0 do_syscall_64+0xcc/0x1e0 entry_SYSCALL_64_after_hwframe+0x6f/0x77 Fixes: b63e78fca889 ("net: netdevsim: use mock PHC driver") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-17net: stmmac: Prevent DSA tags from breaking COERomain Gantois
Some DSA tagging protocols change the EtherType field in the MAC header e.g. DSA_TAG_PROTO_(DSA/EDSA/BRCM/MTK/RTL4C_A/SJA1105). On TX these tagged frames are ignored by the checksum offload engine and IP header checker of some stmmac cores. On RX, the stmmac driver wrongly assumes that checksums have been computed for these tagged packets, and sets CHECKSUM_UNNECESSARY. Add an additional check in the stmmac TX and RX hotpaths so that COE is deactivated for packets with ethertypes that will not trigger the COE and IP header checks. Fixes: 6b2c6e4a938f ("net: stmmac: propagate feature flags to vlan") Cc: <stable@vger.kernel.org> Reported-by: Richard Tresidder <rtresidd@electromag.com.au> Link: https://lore.kernel.org/netdev/e5c6c75f-2dfa-4e50-a1fb-6bf4cdb617c2@electromag.com.au/ Reported-by: Romain Gantois <romain.gantois@bootlin.com> Link: https://lore.kernel.org/netdev/c57283ed-6b9b-b0e6-ee12-5655c1c54495@bootlin.com/ Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Romain Gantois <romain.gantois@bootlin.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-16net: sfp-bus: fix SFP mode detect from bitrateRussell King (Oracle)
The referenced commit moved the setting of the Autoneg and pause bits early in sfp_parse_support(). However, we check whether the modes are empty before using the bitrate to set some modes. Setting these bits so early causes that test to always be false, preventing this working, and thus some modules that used to work no longer do. Move them just before the call to the quirk. Fixes: 8110633db49d ("net: sfp-bus: allow SFP quirks to override Autoneg and pause bits") Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://lore.kernel.org/r/E1rPMJW-001Ahf-L0@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-16net: dsa: vsc73xx: Add null pointer check to vsc73xx_gpio_probeKunwu Chan
devm_kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Fixes: 05bd97fc559d ("net: dsa: Add Vitesse VSC73xx DSA router driver") Signed-off-by: Kunwu Chan <chentao@kylinos.cn> Suggested-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240111072018.75971-1-chentao@kylinos.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-16net: stmmac: ethtool: Fixed calltrace caused by unbalanced disable_irq_wake ↵Qiang Ma
calls We found the following dmesg calltrace when testing the GMAC NIC notebook: [9.448656] ------------[ cut here ]------------ [9.448658] Unbalanced IRQ 43 wake disable [9.448673] WARNING: CPU: 3 PID: 1083 at kernel/irq/manage.c:688 irq_set_irq_wake+0xe0/0x128 [9.448717] CPU: 3 PID: 1083 Comm: ethtool Tainted: G O 4.19 #1 [9.448773] ... [9.448774] Call Trace: [9.448781] [<9000000000209b5c>] show_stack+0x34/0x140 [9.448788] [<9000000000d52700>] dump_stack+0x98/0xd0 [9.448794] [<9000000000228610>] __warn+0xa8/0x120 [9.448797] [<9000000000d2fb60>] report_bug+0x98/0x130 [9.448800] [<900000000020a418>] do_bp+0x248/0x2f0 [9.448805] [<90000000002035f4>] handle_bp_int+0x4c/0x78 [9.448808] [<900000000029ea40>] irq_set_irq_wake+0xe0/0x128 [9.448813] [<9000000000a96a7c>] stmmac_set_wol+0x134/0x150 [9.448819] [<9000000000be6ed0>] dev_ethtool+0x1368/0x2440 [9.448824] [<9000000000c08350>] dev_ioctl+0x1f8/0x3e0 [9.448827] [<9000000000bb2a34>] sock_ioctl+0x2a4/0x450 [9.448832] [<900000000046f044>] do_vfs_ioctl+0xa4/0x738 [9.448834] [<900000000046f778>] ksys_ioctl+0xa0/0xe8 [9.448837] [<900000000046f7d8>] sys_ioctl+0x18/0x28 [9.448840] [<9000000000211ab4>] syscall_common+0x20/0x34 [9.448842] ---[ end trace 40c18d9aec863c3e ]--- Multiple disable_irq_wake() calls will keep decreasing the IRQ wake_depth, When wake_depth is 0, calling disable_irq_wake() again, will report the above calltrace. Due to the need to appear in pairs, we cannot call disable_irq_wake() without calling enable_irq_wake(). Fix this by making sure there are no unbalanced disable_irq_wake() calls. Fixes: 3172d3afa998 ("stmmac: support wake up irq from external sources (v3)") Signed-off-by: Qiang Ma <maqianga@uniontech.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240112021249.24598-1-maqianga@uniontech.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-14net: ravb: Fix dma_addr_t truncation in error caseNikita Yushchenko
In ravb_start_xmit(), ravb driver uses u32 variable to store result of dma_map_single() call. Since ravb hardware has 32-bit address fields in descriptors, this works properly when mapping is successful - it is platform's job to provide mapping addresses that fit into hardware limitations. However, in failure case dma_map_single() returns DMA_MAPPING_ERROR constant that is 64-bit when dma_addr_t is 64-bit. Storing this constant in u32 leads to truncation, and further call to dma_mapping_error() fails to notice the error. Fix that by storing result of dma_map_single() in a dma_addr_t variable. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-13net: stmmac: Fix ethool link settings ops for integrated PCSSneh Shah
Currently get/set_link_ksettings ethtool ops are dependent on PCS. When PCS is integrated, it will not have separate link config. Bypass configuring and checking PCS for integrated PCS. Fixes: aa571b6275fb ("net: stmmac: add new switch to struct plat_stmmacenet_data") Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride Signed-off-by: Sneh Shah <quic_snehshah@quicinc.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-12net: liquidio: fix clang-specific W=1 build warningsDmitry Antipov
When compiling with clang-18 and W=1, I've noticed the following warnings: drivers/net/ethernet/cavium/liquidio/cn23xx_pf_device.c:1493:16: warning: cast from 'void (*)(struct octeon_device *, struct octeon_mbox_cmd *, void *)' to 'octeon_mbox_callback_t' (aka 'void (*)(void *, void *, void *)') converts to incompatible function type [-Wcast-function-type-strict] 1493 | mbox_cmd.fn = (octeon_mbox_callback_t)cn23xx_get_vf_stats_callback; | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ and: drivers/net/ethernet/cavium/liquidio/cn23xx_vf_device.c:432:16: warning: cast from 'void (*)(struct octeon_device *, struct octeon_mbox_cmd *, void *)' to 'octeon_mbox_callback_t' (aka 'void (*)(void *, void *, void *)') converts to incompatible function type [-Wcast-function-type-strict] 432 | mbox_cmd.fn = (octeon_mbox_callback_t)octeon_pfvf_hs_callback; | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fix both of the above by adjusting 'octeon_mbox_callback_t' to match actual callback definitions (at the cost of adding an extra forward declaration). Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240111162432.124014-1-dmantipov@yandex.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-12Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma updates from Jason Gunthorpe: "Small cycle, with some typical driver updates: - General code tidying in siw, hfi1, idrdma, usnic, hns rtrs and bnxt_re - Many small siw cleanups without an overeaching theme - Debugfs stats for hns - Fix a TX queue timeout in IPoIB and missed locking of the mcast list - Support more features of P7 devices in bnxt_re including a new work submission protocol - CQ interrupts for MANA - netlink stats for erdma - EFA multipath PCI support - Fix Incorrect MR invalidation in iser" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (66 commits) RDMA/bnxt_re: Fix error code in bnxt_re_create_cq() RDMA/efa: Add EFA query MR support IB/iser: Prevent invalidating wrong MR RDMA/erdma: Add hardware statistics support RDMA/erdma: Introduce dma pool for hardware responses of CMDQ requests IB/iser: iscsi_iser.h: fix kernel-doc warning and spellos RDMA/mana_ib: Add CQ interrupt support for RAW QP RDMA/mana_ib: query device capabilities RDMA/mana_ib: register RDMA device with GDMA RDMA/bnxt_re: Fix the sparse warnings RDMA/bnxt_re: Fix the offset for GenP7 adapters for user applications RDMA/bnxt_re: Share a page to expose per CQ info with userspace RDMA/bnxt_re: Add UAPI to share a page with user space IB/ipoib: Fix mcast list locking RDMA/mlx5: Expose register c0 for RDMA device net/mlx5: E-Switch, expose eswitch manager vport net/mlx5: Manage ICM type of SW encap RDMA/mlx5: Support handling of SW encap ICM area net/mlx5: Introduce indirect-sw-encap ICM properties RDMA/bnxt_re: Adds MSN table capability for Gen P7 adapters ...
2024-01-12net: fill in MODULE_DESCRIPTION()s for wx_libJakub Kicinski
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add a description to Wangxun's common code lib. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-12net: phy: micrel: populate .soft_reset for KSZ9131Claudiu Beznea
The RZ/G3S SMARC Module has 2 KSZ9131 PHYs. In this setup, the KSZ9131 PHY is used with the ravb Ethernet driver. It has been discovered that when bringing the Ethernet interface down/up continuously, e.g., with the following sh script: $ while :; do ifconfig eth0 down; ifconfig eth0 up; done the link speed and duplex are wrong after interrupting the bring down/up operation even though the Ethernet interface is up. To recover from this state the following configuration sequence is necessary (executed manually): $ ifconfig eth0 down $ ifconfig eth0 up The behavior has been identified also on the Microchip SAMA7G5-EK board which runs the macb driver and uses the same PHY. The order of PHY-related operations in ravb_open() is as follows: ravb_open() -> ravb_phy_start() -> ravb_phy_init() -> of_phy_connect() -> phy_connect_direct() -> phy_attach_direct() -> phy_init_hw() -> phydev->drv->soft_reset() phydev->drv->config_init() phydev->drv->config_intr() phy_resume() kszphy_resume() The order of PHY-related operations in ravb_close is as follows: ravb_close() -> phy_stop() -> phy_suspend() -> kszphy_suspend() -> genphy_suspend() // set BMCR_PDOWN bit in MII_BMCR In genphy_suspend() setting the BMCR_PDWN bit in MII_BMCR switches the PHY to Software Power-Down (SPD) mode (according to the KSZ9131 datasheet). Thus, when opening the interface after it has been previously closed (via ravb_close()), the phydev->drv->config_init() and phydev->drv->config_intr() reach the KSZ9131 PHY driver via the ksz9131_config_init() and kszphy_config_intr() functions. KSZ9131 specifies that the MII management interface remains operational during SPD (Software Power-Down), but (according to manual): - Only access to the standard registers (0 through 31) is supported. - Access to MMD address spaces other than MMD address space 1 is possible if the spd_clock_gate_override bit is set. - Access to MMD address space 1 is not possible. The spd_clock_gate_override bit is not used in the KSZ9131 driver. ksz9131_config_init() configures RGMII delay, pad skews and LEDs by accessesing MMD registers other than those in address space 1. The datasheet for the KSZ9131 does not specify what happens if registers from an unsupported address space are accessed while the PHY is in SPD. To fix the issue the .soft_reset method has been instantiated for KSZ9131, too. This resets the PHY to the default state before doing any configurations to it, thus switching it out of SPD. Fixes: bff5b4b37372 ("net: phy: micrel: add Microchip KSZ9131 initial driver") Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-12net: micrel: Fix PTP frame parsing for lan8841Horatiu Vultur
The HW has the capability to check each frame if it is a PTP frame, which domain it is, which ptp frame type it is, different ip address in the frame. And if one of these checks fail then the frame is not timestamp. Most of these checks were disabled except checking the field minorVersionPTP inside the PTP header. Meaning that once a partner sends a frame compliant to 8021AS which has minorVersionPTP set to 1, then the frame was not timestamp because the HW expected by default a value of 0 in minorVersionPTP. Fix this issue by removing this check so the userspace can decide on this. Fixes: cafc3662ee3f ("net: micrel: Add PHC support for lan8841") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Divya Koppera <divya.koppera@microchip.com> Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-11amt: do not use overwrapped cb areaTaehee Yoo
amt driver uses skb->cb for storing tunnel information. This job is worked before TC layer and then amt driver load tunnel info from skb->cb after TC layer. So, its cb area should not be overwrapped with CB area used by TC. In order to not use cb area used by TC, it skips the biggest cb structure used by TC, which was qdisc_skb_cb. But it's not anymore. Currently, biggest structure of TC's CB is tc_skb_cb. So, it should skip size of tc_skb_cb instead of qdisc_skb_cb. Fixes: ec624fe740b4 ("net/sched: Extend qdisc control block with tc control block") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20240107144241.4169520-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-11net: ethernet: ti: am65-cpsw: Fix max mtu to fit ethernet framesSanjuán García, Jorge
The value of AM65_CPSW_MAX_PACKET_SIZE represents the maximum length of a received frame. This value is written to the register AM65_CPSW_PORT_REG_RX_MAXLEN. The maximum MTU configured on the network device should then leave some room for the ethernet headers and frame check. Otherwise, if the network interface is configured to its maximum mtu possible, the frames will be larger than AM65_CPSW_MAX_PACKET_SIZE and will get dropped as oversized. The switch supports ethernet frame sizes between 64 and 2024 bytes (including VLAN) as stated in the technical reference manual, so define AM65_CPSW_MAX_PACKET_SIZE with that maximum size. Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com> Link: https://lore.kernel.org/r/20240105085530.14070-2-jorge.sanjuangarcia@duagon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-11virtio_net: Fix "‘%d’ directive writing between 1 and 11 bytes into a ↵Zhu Yanjun
region of size 10" warnings Fix the warnings when building virtio_net driver. " drivers/net/virtio_net.c: In function ‘init_vqs’: drivers/net/virtio_net.c:4551:48: warning: ‘%d’ directive writing between 1 and 11 bytes into a region of size 10 [-Wformat-overflow=] 4551 | sprintf(vi->rq[i].name, "input.%d", i); | ^~ In function ‘virtnet_find_vqs’, inlined from ‘init_vqs’ at drivers/net/virtio_net.c:4645:8: drivers/net/virtio_net.c:4551:41: note: directive argument in the range [-2147483643, 65534] 4551 | sprintf(vi->rq[i].name, "input.%d", i); | ^~~~~~~~~~ drivers/net/virtio_net.c:4551:17: note: ‘sprintf’ output between 8 and 18 bytes into a destination of size 16 4551 | sprintf(vi->rq[i].name, "input.%d", i); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/virtio_net.c: In function ‘init_vqs’: drivers/net/virtio_net.c:4552:49: warning: ‘%d’ directive writing between 1 and 11 bytes into a region of size 9 [-Wformat-overflow=] 4552 | sprintf(vi->sq[i].name, "output.%d", i); | ^~ In function ‘virtnet_find_vqs’, inlined from ‘init_vqs’ at drivers/net/virtio_net.c:4645:8: drivers/net/virtio_net.c:4552:41: note: directive argument in the range [-2147483643, 65534] 4552 | sprintf(vi->sq[i].name, "output.%d", i); | ^~~~~~~~~~~ drivers/net/virtio_net.c:4552:17: note: ‘sprintf’ output between 9 and 19 bytes into a destination of size 16 4552 | sprintf(vi->sq[i].name, "output.%d", i); " Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev> Link: https://lore.kernel.org/r/20240104020902.2753599-1-yanjun.zhu@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-11octeontx2-af: CN10KB: Fix FIFO length calculation for RPM2Nithin Dabilpuram
RPM0 and RPM1 on the CN10KB SoC have 8 LMACs each, whereas RPM2 has only 4 LMACs. Similarly, the RPM0 and RPM1 have 256KB FIFO, whereas RPM2 has 128KB FIFO. This patch fixes an issue with improper TX credit programming for the RPM2 link. Fixes: b9d0fedc6234 ("octeontx2-af: cn10kb: Add RPM_USX MAC support") Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240108073036.8766-1-naveenm@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-11net: qualcomm: rmnet: fix global oob in rmnet_policyLin Ma
The variable rmnet_link_ops assign a *bigger* maxtype which leads to a global out-of-bounds read when parsing the netlink attributes. See bug trace below: ================================================================== BUG: KASAN: global-out-of-bounds in validate_nla lib/nlattr.c:386 [inline] BUG: KASAN: global-out-of-bounds in __nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600 Read of size 1 at addr ffffffff92c438d0 by task syz-executor.6/84207 CPU: 0 PID: 84207 Comm: syz-executor.6 Tainted: G N 6.1.0 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x8b/0xb3 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:284 [inline] print_report+0x172/0x475 mm/kasan/report.c:395 kasan_report+0xbb/0x1c0 mm/kasan/report.c:495 validate_nla lib/nlattr.c:386 [inline] __nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600 __nla_parse+0x3e/0x50 lib/nlattr.c:697 nla_parse_nested_deprecated include/net/netlink.h:1248 [inline] __rtnl_newlink+0x50a/0x1880 net/core/rtnetlink.c:3485 rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3594 rtnetlink_rcv_msg+0x43c/0xd70 net/core/rtnetlink.c:6091 netlink_rcv_skb+0x14f/0x410 net/netlink/af_netlink.c:2540 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x54e/0x800 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x930/0xe50 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0x154/0x190 net/socket.c:734 ____sys_sendmsg+0x6df/0x840 net/socket.c:2482 ___sys_sendmsg+0x110/0x1b0 net/socket.c:2536 __sys_sendmsg+0xf3/0x1c0 net/socket.c:2565 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fdcf2072359 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fdcf13e3168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fdcf219ff80 RCX: 00007fdcf2072359 RDX: 0000000000000000 RSI: 0000000020000200 RDI: 0000000000000003 RBP: 00007fdcf20bd493 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fffbb8d7bdf R14: 00007fdcf13e3300 R15: 0000000000022000 </TASK> The buggy address belongs to the variable: rmnet_policy+0x30/0xe0 The buggy address belongs to the physical page: page:0000000065bdeb3c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x155243 flags: 0x200000000001000(reserved|node=0|zone=2) raw: 0200000000001000 ffffea00055490c8 ffffea00055490c8 0000000000000000 raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffffff92c43780: f9 f9 f9 f9 00 00 00 02 f9 f9 f9 f9 00 00 00 07 ffffffff92c43800: f9 f9 f9 f9 00 00 00 05 f9 f9 f9 f9 06 f9 f9 f9 >ffffffff92c43880: f9 f9 f9 f9 00 00 00 00 00 00 f9 f9 f9 f9 f9 f9 ^ ffffffff92c43900: 00 00 00 00 00 00 00 00 07 f9 f9 f9 f9 f9 f9 f9 ffffffff92c43980: 00 00 00 07 f9 f9 f9 f9 00 00 00 05 f9 f9 f9 f9 According to the comment of `nla_parse_nested_deprecated`, the maxtype should be len(destination array) - 1. Hence use `IFLA_RMNET_MAX` here. Fixes: 14452ca3b5ce ("net: qualcomm: rmnet: Export mux_id and flags to netlink") Signed-off-by: Lin Ma <linma@zju.edu.cn> Reviewed-by: Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20240110061400.3356108-1-linma@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-11wangxunx: select CONFIG_PHYLINK where neededArnd Bergmann
The ngbe driver needs phylink: arm-linux-gnueabi-ld: drivers/net/ethernet/wangxun/libwx/wx_ethtool.o: in function `wx_nway_reset': wx_ethtool.c:(.text+0x458): undefined reference to `phylink_ethtool_nway_reset' arm-linux-gnueabi-ld: drivers/net/ethernet/wangxun/ngbe/ngbe_main.o: in function `ngbe_remove': ngbe_main.c:(.text+0x7c): undefined reference to `phylink_destroy' arm-linux-gnueabi-ld: drivers/net/ethernet/wangxun/ngbe/ngbe_main.o: in function `ngbe_open': ngbe_main.c:(.text+0xf90): undefined reference to `phylink_connect_phy' arm-linux-gnueabi-ld: drivers/net/ethernet/wangxun/ngbe/ngbe_mdio.o: in function `ngbe_mdio_init': ngbe_mdio.c:(.text+0x314): undefined reference to `phylink_create' Add the missing Kconfig description for this. Fixes: bc2426d74aa3 ("net: ngbe: convert phylib to phylink") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20240111162828.68564-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-11net: fill in MODULE_DESCRIPTION()s for s2ioBreno Leitao
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Neterion 10GbE (s2io) driver. Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20240108181610.2697017-10-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-11net: fill in MODULE_DESCRIPTION()s for ds26522 moduleBreno Leitao
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to Slic Maxim ds26522 card driver. Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20240108181610.2697017-9-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-11net: fill in MODULE_DESCRIPTION()s for SLIPBreno Leitao
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Serial Line (SLIP) protocol modules. Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20240108181610.2697017-3-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-11Merge tag 'net-next-6.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "The most interesting thing is probably the networking structs reorganization and a significant amount of changes is around self-tests. Core & protocols: - Analyze and reorganize core networking structs (socks, netdev, netns, mibs) to optimize cacheline consumption and set up build time warnings to safeguard against future header changes This improves TCP performances with many concurrent connections up to 40% - Add page-pool netlink-based introspection, exposing the memory usage and recycling stats. This helps indentify bad PP users and possible leaks - Refine TCP/DCCP source port selection to no longer favor even source port at connect() time when IP_LOCAL_PORT_RANGE is set. This lowers the time taken by connect() for hosts having many active connections to the same destination - Refactor the TCP bind conflict code, shrinking related socket structs - Refactor TCP SYN-Cookie handling, as a preparation step to allow arbitrary SYN-Cookie processing via eBPF - Tune optmem_max for 0-copy usage, increasing the default value to 128KB and namespecifying it - Allow coalescing for cloned skbs coming from page pools, improving RX performances with some common configurations - Reduce extension header parsing overhead at GRO time - Add bridge MDB bulk deletion support, allowing user-space to request the deletion of matching entries - Reorder nftables struct members, to keep data accessed by the datapath first - Introduce TC block ports tracking and use. This allows supporting multicast-like behavior at the TC layer - Remove UAPI support for retired TC qdiscs (dsmark, CBQ and ATM) and classifiers (RSVP and tcindex) - More data-race annotations - Extend the diag interface to dump TCP bound-only sockets - Conditional notification of events for TC qdisc class and actions - Support for WPAN dynamic associations with nearby devices, to form a sub-network using a specific PAN ID - Implement SMCv2.1 virtual ISM device support - Add support for Batman-avd mulicast packet type BPF: - Tons of verifier improvements: - BPF register bounds logic and range support along with a large test suite - log improvements - complete precision tracking support for register spills - track aligned STACK_ZERO cases as imprecise spilled registers. This improves the verifier "instructions processed" metric from single digit to 50-60% for some programs - support for user's global BPF subprogram arguments with few commonly requested annotations for a better developer experience - support tracking of BPF_JNE which helps cases when the compiler transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the like - several fixes - Add initial TX metadata implementation for AF_XDP with support in mlx5 and stmmac drivers. Two types of offloads are supported right now, that is, TX timestamp and TX checksum offload - Fix kCFI bugs in BPF all forms of indirect calls from BPF into kernel and from kernel into BPF work with CFI enabled. This allows BPF to work with CONFIG_FINEIBT=y - Change BPF verifier logic to validate global subprograms lazily instead of unconditionally before the main program, so they can be guarded using BPF CO-RE techniques - Support uid/gid options when mounting bpffs - Add a new kfunc which acquires the associated cgroup of a task within a specific cgroup v1 hierarchy where the latter is identified by its id - Extend verifier to allow bpf_refcount_acquire() of a map value field obtained via direct load which is a use-case needed in sched_ext - Add BPF link_info support for uprobe multi link along with bpftool integration for the latter - Support for VLAN tag in XDP hints - Remove deprecated bpfilter kernel leftovers given the project is developed in user-space (https://github.com/facebook/bpfilter) Misc: - Support for parellel TC self-tests execution - Increase MPTCP self-tests coverage - Updated the bridge documentation, including several so-far undocumented features - Convert all the net self-tests to run in unique netns, to avoid random failures due to conflict and allow concurrent runs - Add TCP-AO self-tests - Add kunit tests for both cfg80211 and mac80211 - Autogenerate Netlink families documentation from YAML spec - Add yml-gen support for fixed headers and recursive nests, the tool can now generate user-space code for all genetlink families for which we have specs - A bunch of additional module descriptions fixes - Catch incorrect freeing of pages belonging to a page pool Driver API: - Rust abstractions for network PHY drivers; do not cover yet the full C API, but already allow implementing functional PHY drivers in rust - Introduce queue and NAPI support in the netdev Netlink interface, allowing complete access to the device <> NAPIs <> queues relationship - Introduce notifications filtering for devlink to allow control application scale to thousands of instances - Improve PHY validation, requesting rate matching information for each ethtool link mode supported by both the PHY and host - Add support for ethtool symmetric-xor RSS hash - ACPI based Wifi band RFI (WBRF) mitigation feature for the AMD platform - Expose pin fractional frequency offset value over new DPLL generic netlink attribute - Convert older drivers to platform remove callback returning void - Add support for PHY package MMD read/write New hardware / drivers: - Ethernet: - Octeon CN10K devices - Broadcom 5760X P7 - Qualcomm SM8550 SoC - Texas Instrument DP83TG720S PHY - Bluetooth: - IMC Networks Bluetooth radio Removed: - WiFi: - libertas 16-bit PCMCIA support - Atmel at76c50x drivers - HostAP ISA/PCMCIA style 802.11b driver - zd1201 802.11b USB dongles - Orinoco ISA/PCMCIA 802.11b driver - Aviator/Raytheon driver - Planet WL3501 driver - RNDIS USB 802.11b driver Driver updates: - Ethernet high-speed NICs: - Intel (100G, ice, idpf): - allow one by one port representors creation and removal - add temperature and clock information reporting - add get/set for ethtool's header split ringparam - add again FW logging - adds support switchdev hardware packet mirroring - iavf: implement symmetric-xor RSS hash - igc: add support for concurrent physical and free-running timers - i40e: increase the allowable descriptors - nVidia/Mellanox: - Preparation for Socket-Direct multi-dev netdev. That will allow in future releases combining multiple PFs devices attached to different NUMA nodes under the same netdev - Broadcom (bnxt): - TX completion handling improvements - add basic ntuple filter support - reduce MSIX vectors usage for MQPRIO offload - add VXLAN support, USO offload and TX coalesce completion for P7 - Marvell Octeon EP: - xmit-more support - add PF-VF mailbox support and use it for FW notifications for VFs - Wangxun (ngbe/txgbe): - implement ethtool functions to operate pause param, ring param, coalesce channel number and msglevel - Netronome/Corigine (nfp): - add flow-steering support - support UDP segmentation offload - Ethernet NICs embedded, slower, virtual: - Xilinx AXI: remove duplicate DMA code adopting the dma engine driver - stmmac: add support for HW-accelerated VLAN stripping - TI AM654x sw: add mqprio, frame preemption & coalescing - gve: add support for non-4k page sizes. - virtio-net: support dynamic coalescing moderation - nVidia/Mellanox Ethernet datacenter switches: - allow firmware upgrade without a reboot - more flexible support for bridge flooding via the compressed FID flooding mode - Ethernet embedded switches: - Microchip: - fine-tune flow control and speed configurations in KSZ8xxx - KSZ88X3: enable setting rmii reference - Renesas: - add jumbo frames support - Marvell: - 88E6xxx: add "eth-mac" and "rmon" stats support - Ethernet PHYs: - aquantia: add firmware load support - at803x: refactor the driver to simplify adding support for more chip variants - NXP C45 TJA11xx: Add MACsec offload support - Wifi: - MediaTek (mt76): - NVMEM EEPROM improvements - mt7996 Extremely High Throughput (EHT) improvements - mt7996 Wireless Ethernet Dispatcher (WED) support - mt7996 36-bit DMA support - Qualcomm (ath12k): - support for a single MSI vector - WCN7850: support AP mode - Intel (iwlwifi): - new debugfs file fw_dbg_clear - allow concurrent P2P operation on DFS channels - Bluetooth: - QCA2066: support HFP offload - ISO: more broadcast-related improvements - NXP: better recovery in case receiver/transmitter get out of sync" * tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1714 commits) lan78xx: remove redundant statement in lan78xx_get_eee lan743x: remove redundant statement in lan743x_ethtool_get_eee bnxt_en: Fix RCU locking for ntuple filters in bnxt_rx_flow_steer() bnxt_en: Fix RCU locking for ntuple filters in bnxt_srxclsrldel() bnxt_en: Remove unneeded variable in bnxt_hwrm_clear_vnic_filter() tcp: Revert no longer abort SYN_SENT when receiving some ICMP Revert "mlx5 updates 2023-12-20" Revert "net: stmmac: Enable Per DMA Channel interrupt" ipvlan: Remove usage of the deprecated ida_simple_xx() API ipvlan: Fix a typo in a comment net/sched: Remove ipt action tests net: stmmac: Use interrupt mode INTM=1 for per channel irq net: stmmac: Add support for TX/RX channel interrupt net: stmmac: Make MSI interrupt routine generic dt-bindings: net: snps,dwmac: per channel irq net: phy: at803x: make read_status more generic net: phy: at803x: add support for cdt cross short test for qca808x net: phy: at803x: refactor qca808x cable test get status function net: phy: at803x: generalize cdt fault length function net: ethernet: cortina: Drop TSO support ...
2024-01-09Merge tag 'spi-v6.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "A moderately busy release for SPI, the main core update was the merging of support for multiple chip selects, used in some flash configurations. There were also big overhauls for the AXI SPI Engine and PL022 drivers, plus some new device support for ST. There's a few patches for other trees, API updates to allow the multiple chip select support and one of the naming modernisations touched a controller embedded in the USB code. - Support for multiple chip selects. - A big overhaul for the AXI SPI engine driver, modernising it and adding a bunch of new features. - Modernisation of the PL022 driver, fixing some issues with submitting messages while in atomic context in the process. - Many drivers were converted to use new APIs which avoid outdated terminology for devices and controllers. - Support for ST Microelectronics STM32F7 and STM32MP25, and Renesas RZ/Five" * tag 'spi-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (83 commits) spi: stm32: add st,stm32mp25-spi compatible supporting STM32MP25 soc dt-bindings: spi: stm32: add st,stm32mp25-spi compatible spi: stm32: use dma_get_slave_caps prior to configuring dma channel spi: axi-spi-engine: fix struct member doc warnings spi: pl022: update description of internal_cs_control() spi: pl022: delete description of cur_msg spi: dw: Remove Intel Thunder Bay SOC support spi: dw: Remove Intel Thunder Bay SOC support spi: sh-msiof: Enforce fixed DTDL for R-Car H3 spi: ljca: switch to use devm_spi_alloc_host() spi: cs42l43: switch to use devm_spi_alloc_host() spi: zynqmp-gqspi: switch to use modern name spi: zynq-qspi: switch to use modern name spi: xtensa-xtfpga: switch to use modern name spi: xlp: switch to use modern name spi: xilinx: switch to use modern name spi: xcomm: switch to use modern name spi: uniphier: switch to use modern name spi: topcliff-pch: switch to use modern name spi: wpcm-fiu: switch to use devm_spi_alloc_host() ...
2024-01-09Merge tag 'mm-stable-2024-01-08-15-31' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: "Many singleton patches against the MM code. The patch series which are included in this merge do the following: - Peng Zhang has done some mapletree maintainance work in the series 'maple_tree: add mt_free_one() and mt_attr() helpers' 'Some cleanups of maple tree' - In the series 'mm: use memmap_on_memory semantics for dax/kmem' Vishal Verma has altered the interworking between memory-hotplug and dax/kmem so that newly added 'device memory' can more easily have its memmap placed within that newly added memory. - Matthew Wilcox continues folio-related work (including a few fixes) in the patch series 'Add folio_zero_tail() and folio_fill_tail()' 'Make folio_start_writeback return void' 'Fix fault handler's handling of poisoned tail pages' 'Convert aops->error_remove_page to ->error_remove_folio' 'Finish two folio conversions' 'More swap folio conversions' - Kefeng Wang has also contributed folio-related work in the series 'mm: cleanup and use more folio in page fault' - Jim Cromie has improved the kmemleak reporting output in the series 'tweak kmemleak report format'. - In the series 'stackdepot: allow evicting stack traces' Andrey Konovalov to permits clients (in this case KASAN) to cause eviction of no longer needed stack traces. - Charan Teja Kalla has fixed some accounting issues in the page allocator's atomic reserve calculations in the series 'mm: page_alloc: fixes for high atomic reserve caluculations'. - Dmitry Rokosov has added to the samples/ dorectory some sample code for a userspace memcg event listener application. See the series 'samples: introduce cgroup events listeners'. - Some mapletree maintanance work from Liam Howlett in the series 'maple_tree: iterator state changes'. - Nhat Pham has improved zswap's approach to writeback in the series 'workload-specific and memory pressure-driven zswap writeback'. - DAMON/DAMOS feature and maintenance work from SeongJae Park in the series 'mm/damon: let users feed and tame/auto-tune DAMOS' 'selftests/damon: add Python-written DAMON functionality tests' 'mm/damon: misc updates for 6.8' - Yosry Ahmed has improved memcg's stats flushing in the series 'mm: memcg: subtree stats flushing and thresholds'. - In the series 'Multi-size THP for anonymous memory' Ryan Roberts has added a runtime opt-in feature to transparent hugepages which improves performance by allocating larger chunks of memory during anonymous page faults. - Matthew Wilcox has also contributed some cleanup and maintenance work against eh buffer_head code int he series 'More buffer_head cleanups'. - Suren Baghdasaryan has done work on Andrea Arcangeli's series 'userfaultfd move option'. UFFDIO_MOVE permits userspace heap compaction algorithms to move userspace's pages around rather than UFFDIO_COPY'a alloc/copy/free. - Stefan Roesch has developed a 'KSM Advisor', in the series 'mm/ksm: Add ksm advisor'. This is a governor which tunes KSM's scanning aggressiveness in response to userspace's current needs. - Chengming Zhou has optimized zswap's temporary working memory use in the series 'mm/zswap: dstmem reuse optimizations and cleanups'. - Matthew Wilcox has performed some maintenance work on the writeback code, both code and within filesystems. The series is 'Clean up the writeback paths'. - Andrey Konovalov has optimized KASAN's handling of alloc and free stack traces for secondary-level allocators, in the series 'kasan: save mempool stack traces'. - Andrey also performed some KASAN maintenance work in the series 'kasan: assorted clean-ups'. - David Hildenbrand has gone to town on the rmap code. Cleanups, more pte batching, folio conversions and more. See the series 'mm/rmap: interface overhaul'. - Kinsey Ho has contributed some maintenance work on the MGLRU code in the series 'mm/mglru: Kconfig cleanup'. - Matthew Wilcox has contributed lruvec page accounting code cleanups in the series 'Remove some lruvec page accounting functions'" * tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (361 commits) mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER mm, treewide: introduce NR_PAGE_ORDERS selftests/mm: add separate UFFDIO_MOVE test for PMD splitting selftests/mm: skip test if application doesn't has root privileges selftests/mm: conform test to TAP format output selftests: mm: hugepage-mmap: conform to TAP format output selftests/mm: gup_test: conform test to TAP format output mm/selftests: hugepage-mremap: conform test to TAP format output mm/vmstat: move pgdemote_* out of CONFIG_NUMA_BALANCING mm: zsmalloc: return -ENOSPC rather than -EINVAL in zs_malloc while size is too large mm/memcontrol: remove __mod_lruvec_page_state() mm/khugepaged: use a folio more in collapse_file() slub: use a folio in __kmalloc_large_node slub: use folio APIs in free_large_kmalloc() slub: use alloc_pages_node() in alloc_slab_page() mm: remove inc/dec lruvec page state functions mm: ratelimit stat flush from workingset shrinker kasan: stop leaking stack trace handles mm/mglru: remove CONFIG_TRANSPARENT_HUGEPAGE mm/mglru: add dummy pmd_dirty() ...
2024-01-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
Merge in late fixes to prepare for the 6.8 net-next PR No conflicts. Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-08lan78xx: remove redundant statement in lan78xx_get_eeeHeiner Kallweit
eee_active is set by phy_ethtool_get_eee() already, using the same logic plus an additional check against link speed/duplex values. See genphy_c45_eee_is_active() for details. So we can remove this line. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/b086b296-0a1b-42d4-8e2b-ef6682598185@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-08lan743x: remove redundant statement in lan743x_ethtool_get_eeeHeiner Kallweit
eee_active is set by phy_ethtool_get_eee() already, using the same logic plus an additional check against link speed/duplex values. See genphy_c45_eee_is_active() for details. So we can remove this line. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/3340ff84-8d7a-404b-8268-732c7f281164@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-08bnxt_en: Fix RCU locking for ntuple filters in bnxt_rx_flow_steer()Michael Chan
Similar to the previous patch, RCU locking was released too early in bnxt_rx_flow_steer(). Fix it to unlock after reading fltr->base.sw_id to guarantee that fltr won't be freed while we are still reading it. Fixes: cb5bdd292dc0 ("bnxt_en: Add bnxt_lookup_ntp_filter_from_idx() function") Reported-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/netdev/20231225165653.GH5962@kernel.org/ Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240105235439.28282-4-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-08bnxt_en: Fix RCU locking for ntuple filters in bnxt_srxclsrldel()Michael Chan
After looking up an ntuple filter from a RCU hash list, the rcu_read_unlock() call should be made after reading the structure, or after determining that the filter cannot age out (by aRFS). The existing code was calling rcu_read_unlock() too early in bnxt_srxclsrldel(). As suggested by Simon Horman, change the code to handle the error case of fltr_base not found in the if condition. The code looks cleaner this way. Fixes: 8d7ba028aa9a ("bnxt_en: Add support for ntuple filter deletion by ethtool.") Suggested-by: Simon Horman <horms@kernel.org> Reported-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/netdev/20240104145955.5a6df702@kernel.org/ Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240105235439.28282-3-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-08bnxt_en: Remove unneeded variable in bnxt_hwrm_clear_vnic_filter()Michael Chan
After recent refactoring, this function doesn't return error any more. Remove the unneeded rc variable and change the function to void. The caller is not checking for the return value. Fixes: 96c9bedc755e ("bnxt_en: Refactor L2 filter alloc/free firmware commands.") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202401041942.qrB1amZM-lkp@intel.com/ Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240105235439.28282-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-08Merge tag 'powerpc-6.8-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Add initial support to recognise the HeXin C2000 processor. - Add papr-vpd and papr-sysparm character device drivers for VPD & sysparm retrieval, so userspace tools can be adapted to avoid doing raw firmware calls from userspace. - Sched domains optimisations for shared processor partitions on P9/P10. - A series of optimisations for KVM running as a nested HV under PowerVM. - Other small features and fixes. Thanks to Aditya Gupta, Aneesh Kumar K.V, Arnd Bergmann, Christophe Leroy, Colin Ian King, Dario Binacchi, David Heidelberg, Geoff Levand, Gustavo A. R. Silva, Haoran Liu, Jordan Niethe, Kajol Jain, Kevin Hao, Kunwu Chan, Li kunyu, Li zeming, Masahiro Yamada, Michal Suchánek, Nathan Lynch, Naveen N Rao, Nicholas Piggin, Randy Dunlap, Sathvika Vasireddy, Srikar Dronamraju, Stephen Rothwell, Vaibhav Jain, and Zhao Ke. * tag 'powerpc-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (96 commits) powerpc/ps3_defconfig: Disable PPC64_BIG_ENDIAN_ELF_ABI_V2 powerpc/86xx: Drop unused CONFIG_MPC8610 powerpc/powernv: Add error handling to opal_prd_range_is_valid selftests/powerpc: Fix spelling mistake "EACCESS" -> "EACCES" powerpc/hvcall: Reorder Nestedv2 hcall opcodes powerpc/ps3: Add missing set_freezable() for ps3_probe_thread() powerpc/mpc83xx: Use wait_event_freezable() for freezable kthread powerpc/mpc83xx: Add the missing set_freezable() for agent_thread_fn() powerpc/fsl: Fix fsl,tmu-calibration to match the schema powerpc/smp: Dynamically build Powerpc topology powerpc/smp: Avoid asym packing within thread_group of a core powerpc/smp: Add __ro_after_init attribute powerpc/smp: Disable MC domain for shared processor powerpc/smp: Enable Asym packing for cores on shared processor powerpc/sched: Cleanup vcpu_is_preempted() powerpc: add cpu_spec.cpu_features to vmcoreinfo powerpc/imc-pmu: Add a null pointer check in update_events_in_group() powerpc/powernv: Add a null pointer check in opal_powercap_init() powerpc/powernv: Add a null pointer check in opal_event_init() powerpc/powernv: Add a null pointer check to scom_debug_init_one() ...
2024-01-08mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDERKirill A. Shutemov
commit 23baf831a32c ("mm, treewide: redefine MAX_ORDER sanely") has changed the definition of MAX_ORDER to be inclusive. This has caused issues with code that was not yet upstream and depended on the previous definition. To draw attention to the altered meaning of the define, rename MAX_ORDER to MAX_PAGE_ORDER. Link: https://lkml.kernel.org/r/20231228144704.14033-2-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-07Revert "mlx5 updates 2023-12-20"Jakub Kicinski
Revert "net/mlx5: Implement management PF Ethernet profile" This reverts commit 22c4640698a1d47606b5a4264a584e8046641784. Revert "net/mlx5: Enable SD feature" This reverts commit c88c49ac9c18fb7c3fa431126de1d8f8f555e912. Revert "net/mlx5e: Block TLS device offload on combined SD netdev" This reverts commit 83a59ce0057b7753d7fbece194b89622c663b2a6. Revert "net/mlx5e: Support per-mdev queue counter" This reverts commit d72baceb92539a178d2610b0e9ceb75706a75b55. Revert "net/mlx5e: Support cross-vhca RSS" This reverts commit c73a3ab8fa6e93a783bd563938d7cf00d62d5d34. Revert "net/mlx5e: Let channels be SD-aware" This reverts commit e4f9686bdee7b4dd89e0ed63cd03606e4bda4ced. Revert "net/mlx5e: Create EN core HW resources for all secondary devices" This reverts commit c4fb94aa822d6c9d05fc3c5aee35c7e339061dc1. Revert "net/mlx5e: Create single netdev per SD group" This reverts commit e2578b4f983cfcd47837bbe3bcdbf5920e50b2ad. Revert "net/mlx5: SD, Add informative prints in kernel log" This reverts commit c82d360325112ccc512fc11a3b68cdcdf04a1478. Revert "net/mlx5: SD, Implement steering for primary and secondaries" This reverts commit 605fcce33b2d1beb0139b6e5913fa0b2062116b2. Revert "net/mlx5: SD, Implement devcom communication and primary election" This reverts commit a45af9a96740873db9a4b5bb493ce2ad81ccb4d5. Revert "net/mlx5: SD, Implement basic query and instantiation" This reverts commit 63b9ce944c0e26c44c42cdd5095c2e9851c1a8ff. Revert "net/mlx5: SD, Introduce SD lib" This reverts commit 4a04a31f49320d078b8078e1da4b0e2faca5dfa3. Revert "net/mlx5: Fix query of sd_group field" This reverts commit e04984a37398b3f4f5a79c993b94c6b1224184cc. Revert "net/mlx5e: Use the correct lag ports number when creating TISes" This reverts commit a7e7b40c4bc115dbf2a2bb453d7bbb2e0ea99703. There are some unanswered questions on the list, and we don't have any docs. Given the lack of replies so far and the fact that v6.8 merge window has started - let's revert this and revisit for v6.9. Link: https://lore.kernel.org/all/20231221005721.186607-1-saeed@kernel.org/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-07Revert "net: stmmac: Enable Per DMA Channel interrupt"Jakub Kicinski
Revert "net: stmmac: Use interrupt mode INTM=1 for per channel irq" This reverts commit 36af9f25ddfd311da82628f194c794786467cb12. Revert "net: stmmac: Add support for TX/RX channel interrupt" This reverts commit 9072e03d32088137a435ddf3aa95fd6e038d69d8. Revert "net: stmmac: Make MSI interrupt routine generic" This reverts commit 477bd4beb93bf9ace9bda71f1437b191befa9cf4. Revert "dt-bindings: net: snps,dwmac: per channel irq" This reverts commit 67d47c8ada0f8795bfcdb85cc8f2ad3ce556674b. Device tree bindings need to be reviewed. Link: https://lore.kernel.org/all/2df9fe3e-7971-4aa2-89a9-0e085b3b00d7@linaro.org/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-07ipvlan: Remove usage of the deprecated ida_simple_xx() APIChristophe JAILLET
ida_alloc() and ida_free() should be preferred to the deprecated ida_simple_get() and ida_simple_remove(). This is less verbose. Note that the upper bound of ida_alloc_range() is inclusive while the one of ida_simple_get() was exclusive. So calls have been updated accordingly. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-07ipvlan: Fix a typo in a commentChristophe JAILLET
s/diffentiate/differentiate/ Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-07net: stmmac: Use interrupt mode INTM=1 for per channel irqSwee Leong Ching
Enable per DMA channel interrupt that uses shared peripheral interrupt (SPI), so only per channel TX and RX intr (TI/RI) are handled by TX/RX ISR without calling common interrupt ISR. Signed-off-by: Teoh Ji Sheng <ji.sheng.teoh@intel.com> Signed-off-by: Swee Leong Ching <leong.ching.swee@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-07net: stmmac: Add support for TX/RX channel interruptSwee Leong Ching
Enable TX/RX channel interrupt registration for MAC that interrupts CPU through shared peripheral interrupt (SPI). Per channel interrupts and interrupt-names are registered through, Eg: 4 tx and 4 rx channels: interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "dma_tx0", "dma_tx1", "dma_tx2", "dma_tx3", "dma_rx0", "dma_rx1", "dma_rx2", "dma_rx3"; Signed-off-by: Teoh Ji Sheng <ji.sheng.teoh@intel.com> Signed-off-by: Swee Leong Ching <leong.ching.swee@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-07net: stmmac: Make MSI interrupt routine genericSwee Leong Ching
There is no support for per DMA channel interrupt for non-MSI platform, where the MAC's per channel interrupt hooks up to interrupt controller(GIC) through shared peripheral interrupt(SPI) to handle interrupt from TX/RX transmit channel. This patch generalize the existing MSI ISR to also support non-MSI platform. Signed-off-by: Teoh Ji Sheng <ji.sheng.teoh@intel.com> Signed-off-by: Swee Leong Ching <leong.ching.swee@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-07net: phy: at803x: make read_status more genericChristian Marangi
Make read_status more generic in preparation on moving it to shared library as other PHY Family Driver will have the exact same implementation. The only specific part was a check for AR8031/33 if 1000basex was used. The check is moved to a dedicated function specific for those PHYs. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-26 10:37:49 +0000