summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/display
AgeCommit message (Collapse)Author
2023-02-10drm/i915/display: Pass drm_i915_private as param to i915 funcsNirmoy Das
For i915 functions pass struct drm_i915_private directly instead of struct drm_device. v2: Use to_i915(dev) directly without alias(Andrzej). Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Suggested-by: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230125095603.17845-1-nirmoy.das@intel.com
2023-02-10drm/i915: Replace wm.max_levels with wm.num_levels and use it everywhereVille Syrjälä
Replaces wm.max_level with wm.num_levels, since that generally results in nicer looking code (for-loops can be in standard form etc.). Also get rid of the two different wrappers we have for this (ilk_wm_max_level() and intel_wm_num_levels()). They don't really do anything for us other than potentially slow things down if the compiler actually emits the function calls every time (num_planes*num_wm_levels*higher_level_wm_function_calls could be a big number). The watermark code already shows up far too prominently in cpu profiles. Though I must admit that I didn't look at the generated code this time. v2: Fix the ilk_wm_merge() off-by-one (Jani) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230209222504.31478-1-ville.syrjala@linux.intel.com
2023-02-10drm/i915: Populate wm.max_level for everyoneVille Syrjälä
Switch ilk+ and skl+ platforms to also setting up wm.max_level and remove a bunch of if ladders as a result. There will be a tiny change in the debugfs on CHV machines that have DVFS disabled in the BIOS. Presviously debugfs would show the latency for the DVFS level as well, but that will no longer be the case. Which is arguably better as that number is absolutely meaningless when DVFS can't be enabled anyway. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230209003251.32021-1-ville.syrjala@linux.intel.com
2023-02-08drm/i915/bios: set default backlight controller indexJani Nikula
With backlight controller set to -1 in intel_panel_init_alloc() to distinguish uninitialized values, and controller later being set only if it's present in VBT, we can end up with -1 for the controller: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 4294967295 There's no harm if it happens on platforms that ignore controller due to only one backlight controller being present, like on VLV above, but play it safe. Fixes: bf38bba3e7d6 ("drm/i915: Try to use the correct power sequencer intiially on bxt/glk") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230207111626.1839645-1-jani.nikula@intel.com
2023-02-08drm/i915/dmc: drop "ucode" from function namesJani Nikula
The ucode part in the init, fini, suspend and resume function names is just unnecessary. Drop it. Cc: Imre Deak <imre.deak@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230207110619.1821992-1-jani.nikula@intel.com
2023-02-08drm/i915: Pick the backlight controller based on VBT on ICP+Ville Syrjälä
Use the second backlight controller on ICP+ if the VBT asks us to do so. On pre-MTP we also check the chicken bit to make sure the pins have been correctly muxed by the firmware. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8016 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230207064337.18697-4-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-02-08drm/i915: Populate encoder->devdata for DSI on icl+Ville Syrjälä
We now have some eDP+DSI dual panel systems floating around where the DSI panel is the secondary LFP and thus needs to consult "panel type 2" in VBT in order to locate all the other panel type dependant stuff correctly. To that end we need to pass in the devdata to intel_bios_init_panel_late(), otherwise it'll just assume we want the primary panel type. So let's try to just populate the vbt.ports[] stuff and encoder->devdata for icl+ DSI panels as well. We can't do this on older platforms as there we risk a DSI port aliasing with a HDMI/DP port, which is a totally legal thing as the DSI ports live in their own little parallel universe. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8016 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230207064337.18697-3-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-02-08drm/i915: Fix VBT DSI DVO port handlingVille Syrjälä
Turns out modern (icl+) VBTs still declare their DSI ports as MIPI-A and MIPI-C despite the PHYs now being A and B. Remap appropriately to allow the panels declared as MIPI-C to work. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8016 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230207064337.18697-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-02-03drm/i915/dsb: Introduce intel_dsb_finish()Ville Syrjälä
Introduce a function to emits whatever commands we need at the end of the DSB command buffer. For the moment we only do the tail cacheline alignment there, but eventually we might want to eg. emit an interrupt. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230118163040.29808-5-ville.syrjala@linux.intel.com Reviewed-by: Animesh Manna <animesh.manna@intel.com>
2023-02-03drm/i915/dsb: Split intel_dsb_wait() from intel_dsb_commit()Ville Syrjälä
Starting the DSB execution vs. waiting for it stop are two totally different things. Split intel_dsb_wait() from intel_dsb_commit() so that we can eventually allow the DSB to execute asynchronously. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230118163040.29808-4-ville.syrjala@linux.intel.com Reviewed-by: Animesh Manna <animesh.manna@intel.com>
2023-02-03drm/i915/dsb: Pimp debug/error printsVille Syrjälä
Print the crtc/DSB id information to make it clear which DSB engine we're talking about. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230118163040.29808-3-ville.syrjala@linux.intel.com Reviewed-by: Animesh Manna <animesh.manna@intel.com>
2023-02-03drm/i915/fbdev: Implement fb_dirty for intel custom fb helperJouni Högander
After disconnecting damage worker from update logic it's left to fbdev emulation implementation to have fb_dirty function. Currently intel fbdev doesn't have it. This is causing problems to features (PSR, FBC, DRRS) relying on dirty callback. Implement simple fb_dirty callback to deliver notifications about updates in fb console. v4: Add proper Fixes tag and modify commit message v3: Check damage clip v2: Improved commit message and added Fixes tag Fixes: f231af498c29 ("drm/fb-helper: Disconnect damage worker from update logic") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230123074437.475103-1-jouni.hogander@intel.com
2023-02-02drm/i915/dmc: check incoming dmc id validityJani Nikula
Add validity checks for the dmc ids computed from pipe parameters in intel_dmc_enable_pipe() and intel_dmc_disable_pipe(). It's slightly difficult for humans and static analyzers alike to ensure the resulting dmc ids are within bounds. Just check them and reject invalid ones. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/6a349c3a2b2def5fc31a48c9844ebd72ee55a22b.1675339447.git.jani.nikula@intel.com
2023-02-02drm/i915/dmc: add is_valid_dmc_id() and use itJani Nikula
Add a name to the dmc id validity check. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/311213ce328575a95d793a219d4dac7d947086cc.1675339447.git.jani.nikula@intel.com
2023-02-02drm/i915/dmc: remove unnecessary dmc_id validity checkJani Nikula
The dmc_id comes from for_each_dmc_id() in parse_dmc_fw() -> parse_dmc_fw_header() -> dmc_mmio_addr_sanity_check(). It's valid by definition. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/b4e1c862687f79861a5fa4bfa6797ecda2136fab.1675339447.git.jani.nikula@intel.com
2023-02-02drm/i915/dmc: add for_each_dmc_id() and use itJani Nikula
The loop is duplicated many times, with slightly different ways. Unify. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/8dcaa716093e6fbe75bb69ee7ac715a3f007a523.1675339447.git.jani.nikula@intel.com
2023-02-02drm/i915/dmc: add proper name to dmc id enum and use itJani Nikula
Clarify DMC ID usage by adding enum intel_dmc_id name to the enum, and use dmc_id as the variable name for it throughout. Convert a switch-case to if-ladder to avoid warnings about not handling DMC_FW_MAX enumeration constant in the switch-case. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/6912ccb411bb957c68c108b774745dbc7e0cbdc2.1675339447.git.jani.nikula@intel.com
2023-02-01drm/i915: Expose SAGV state via debugfsVille Syrjälä
Since SAGV is controlled via unidirectional pcode commands we have no way to query the current state. So instead let's expose the last programmed state via debugfs. This way we can at least know whether SAGV should be enabled or not (which can be important to know when dealing with underruns/etc.). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230131002127.29305-4-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-02-01drm/i915: Keep sagv status updated on icl+Ville Syrjälä
On icl+ SAGV is controlled by masking of the QGV points. Reduce the QGV point mask to the same kind of enabled vs. disable information that we had on previous platforms. Will be useful in answering the question whether SAGV is actually enabled or not. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230131002127.29305-3-ville.syrjala@linux.intel.com Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
2023-02-01drm/i915: Introduce HAS_SAGV()Ville Syrjälä
Introuce a HAS_SAGV() macro to answer the question whether the platform in general supports SAGV. intel_has_sagv() will keep on giving us the more specific answer whether the current device supports SAGV or not. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230131002127.29305-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-02-01drm/i915: Don't do the WM0->WM1 copy w/a if WM1 is already enabledVille Syrjälä
Due to a workaround we have to make sure the WM1 watermarks block/lines values are sensible even when WM1 is disabled. To that end we copy those values from WM0. However since we now keep each wm level enabled on a per-plane basis it doesn't seem necessary to do that copy when we already have an enabled WM1 on the current plane. That is, we might be in a situation where another plane can only do WM0 (and thus needs the copy) but the current plane's WM1 is still perfectly valid (ie. fits into the current DDB allocation). Skipping the copy could avoid reprogramming the plane's registers needlessly in some cases. Fixes: a301cb0fca2d ("drm/i915: Keep plane watermarks enabled more aggressively") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230131002127.29305-1-ville.syrjala@linux.intel.com Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
2023-01-31drm/i915/lvds: s/pipe_config/crtc_state/Ville Syrjälä
Call the crtc state 'crtc_state' rather than 'pipe_config', as is the modern style. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230130180540.8972-9-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-01-31drm/i915/lvds: s/intel_encoder/encoder/ etc.Ville Syrjälä
Get rid of some of the annoying aliasing drm_ vs. intel_ encoder/connector variables. Just prefer the intel_ types. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230130180540.8972-8-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-01-31drm/i915/lvds: s/dev_priv/i915/Ville Syrjälä
Do the customary s/dev_priv/i915/ rename and aliasing 'dev' pointer removal. Though various register definitions still depend on the magic 'dev_priv' variable so not a 100% conversion. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230130180540.8972-7-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-01-31drm/i915/lvds: Fix whitespaceVille Syrjälä
Replace some stray spaces with tabs. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230130180540.8972-6-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-01-31drm/i915/lvds: Extract intel_lvds_regs.hVille Syrjälä
Extract the integrated LVDS port register definitions into their own header file. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230130180540.8972-5-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-01-31drm/i915/lvds: Use REG_BIT() & co.Ville Syrjälä
Use REG_BIT() & co. for the LVDS port register. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230130180540.8972-4-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-01-31drm/i915/lvds: Use intel_de_rmw()Ville Syrjälä
Replace the hand rolled rmw stuff with intel_de_rmw(). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230130180540.8972-3-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-01-31drm/i915/lvds: Split long linesVille Syrjälä
Split some overly long lines. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230130180540.8972-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-01-31drm/i915: Implement workaround for CDCLK PLL disable/enableStanislav Lisovskiy
It was reported that we might get a hung and loss of register access in some cases when CDCLK PLL is disabled and then enabled, while squashing is enabled. As a workaround it was proposed by HW team that SW should disable squashing when CDCLK PLL is being reenabled. v2: - Added WA number comment(Rodrigo Vivi) Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230130135836.12738-1-stanislav.lisovskiy@intel.com
2023-01-31drm/i915/hdmi: Go for scrambling only if platform supports TMDS clock > 340MHzAnkit Nautiyal
There are cases, where devices have an HDMI1.4 retimer, and TMDS clock rate is capped to 340MHz via VBT. In such cases scrambling might be supported by the platform and an HDMI2.0 sink for lower TMDS rates, but not supported by the retimer, causing blankouts. So avoid enabling scrambling, if the TMDS clock is capped to <= 340MHz. v2: Added comment, documenting the rationale to check for TMDS clock, before going for scrambling. (Arun) v3: Fixed the function name to check if source supports scrambling. (Jani) Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221222040851.3029514-1-ankit.k.nautiyal@intel.com
2023-01-30drm/i915/dg1: Drop support for pre-production steppingsMatt Roper
Several post-DG1 platforms have been brought up now, so we're well past the point where we usually drop the workarounds that are only applicable to internal/pre-production hardware. Production DG1 hardware always has a B0 stepping for both display and GT. Bspec: 44463 Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230127224313.4042331-3-matthew.d.roper@intel.com
2023-01-30drm/i915/tgl: Drop support for pre-production steppingsMatt Roper
Several post-TGL platforms have been brought up now, so we're well past the point where we usually drop the workarounds that are only applicable to internal/pre-production hardware. Production TGL hardware always has display stepping C0 or later and GT stepping B0 or later (this is true for both the original TGL and the U/Y subplatform). Bspec 44455 Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230127224313.4042331-2-matthew.d.roper@intel.com
2023-01-30drm/i915: implement async_flip mode per plane trackingAndrzej Hajda
Current implementation of async flip w/a relies on assumption that previous atomic commit contains valid information if async_flip is still enabled on the plane. It is incorrect. If previous commit did not modify the plane its state->uapi.async_flip can be false. As a result DMAR/PIPE errors can be observed: i915 0000:00:02.0: [drm] *ERROR* Fault errors on pipe A: 0x00000080 i915 0000:00:02.0: [drm] *ERROR* Fault errors on pipe A: 0x00000080 DMAR: DRHD: handling fault status reg 2 DMAR: [DMA Read NO_PASID] Request device [00:02.0] fault addr 0x0 [fault reason 0x06] PTE Read access is not set v2: update async_flip_planes in more reliable places (Ville) v3: reset async_flip_planes and do_async_flip in more scenarios (Ville) v4: move all resets to plane loops (Ville) Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230127153003.2225111-1-andrzej.hajda@intel.com
2023-01-30drm/i915/psr: Split sel fetch plane configuration into arm and noarmJouni Högander
SEL_FETCH_CTL registers are armed immediately when plane is disabled. SEL_FETCH_* instances of plane configuration are used when doing selective update and normal plane register instances for full updates. Currently all SEL_FETCH_* registers are written as a part of noarm plane configuration. If noarm and arm plane configuration are not happening within same vblank we may end up having plane as a part of selective update before it's PLANE_SURF register is written. Fix this by splitting plane selective fetch configuration into arm and noarm versions and call them accordingly. Write SEL_FETCH_CTL in arm version. v3: - add arm suffix into intel_psr2_disable_plane_sel_fetch v2: - drop color_plane parameter from arm part - dev_priv -> i915 in arm part Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Mika Kahola <mika.kahola@intel.com> Cc: Vinod Govindapillai <vinod.govindapillai@intel.com> Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Cc: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Luca Coelho <luciano.coelho@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230130080651.3796929-1-jouni.hogander@intel.com
2023-01-30drm/i915/display/dsi: use intel_de_rmw if possibleAndrzej Hajda
The helper makes the code more compact and readable. Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221219130844.2914001-1-andrzej.hajda@intel.com
2023-01-30drm/i915/display/vlv: use intel_de_rmw if possibleAndrzej Hajda
The helper makes the code more compact and readable. Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221219092428.2515430-2-andrzej.hajda@intel.com
2023-01-30drm/i915/display/vlv: fix pixel overlap register updateAndrzej Hajda
To update properly bits in the register the mask should be used to clear old value and then the result should be or-ed with new value, for such updates there is separate helper intel_de_rmw. Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221219092428.2515430-1-andrzej.hajda@intel.com
2023-01-30drm/i915/display/fdi: use intel_de_rmw if possibleAndrzej Hajda
The helper makes the code more compact and readable. Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221215125610.1161729-1-andrzej.hajda@intel.com
2023-01-30drm/i915/adlp: Fix typo for reference clockChaitanya Kumar Borah
Fix typo for reference clock from 24400 to 24000. Bspec: 55409 Fixes: 626426ff9ce4 ("drm/i915/adl_p: Add cdclk support for ADL-P") Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230112094131.550252-1-chaitanya.kumar.borah@intel.com
2023-01-27drm/i915: Convert _FIA() to _PICK_EVEN_2RANGES()Lucas De Marchi
_FIA() can use _PICK_EVEN_2RANGES instead of _PICK, which reduces the size and is safer. Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230120193457.3295977-7-lucas.demarchi@intel.com
2023-01-27drm/i915: Convert PIPE3/PORT3 to _PICK_EVEN_2RANGES()Lucas De Marchi
Like done for when __var_args__ were used, but size-wise it's also benefitial to avoid _PICK() used for 3 ports/pipes: $ size build64/drivers/gpu/drm/i915/i915.o{.old,.new} text data bss dec hex filename 4026288 185703 6984 4218975 40605f build64/drivers/gpu/drm/i915/i915.o.old 4025496 185703 6984 4218183 405d47 build64/drivers/gpu/drm/i915/i915.o.new Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230120193457.3295977-6-lucas.demarchi@intel.com
2023-01-27drm/i915: Replace _MMIO_PHY3() with _PICK_EVEN_2RANGES()Lucas De Marchi
As done previously for pll, also convert users of _PHY3() to _PICK_EVEN_2RANGES(). Size comparison of i915.o: $ size build64/drivers/gpu/drm/i915/i915.o{.old,.new} text data bss dec hex filename 4026997 185703 6984 4219684 406324 build64/drivers/gpu/drm/i915/i915.o.old 4026288 185703 6984 4218975 40605f build64/drivers/gpu/drm/i915/i915.o.new Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230120193457.3295977-5-lucas.demarchi@intel.com
2023-01-27drm/i915: Convert pll macros to _PICK_EVEN_2RANGESLucas De Marchi
Avoid the array lookup, converting the PLL macros after ICL to _PICK_EVEN_RANGES. This provides the following reduction in code size: $ size build64/drivers/gpu/drm/i915/i915.o{.old,.new} text data bss dec hex filename 4027456 185703 6984 4220143 4064ef build64/drivers/gpu/drm/i915/i915.o.old 4026997 185703 6984 4219684 406324 build64/drivers/gpu/drm/i915/i915.o.new At the same time it's safer, avoiding out-of-bounds array access. This allows to remove _MMIO_PLL3() that is now unused. Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230120193457.3295977-4-lucas.demarchi@intel.com
2023-01-26drm/i915/mtl: Apply Wa_14013475917 for all MTL steppingsJouni Högander
Wa_14013475917 has to be applied for all MTL steppings. Bspec: 66624 Cc: Mika Kahola <mika.kahola@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230124102636.2567292-3-jouni.hogander@intel.com
2023-01-26drm/i915/psr: Implement Wa_14014971492Jouni Högander
Implement Wa_14014971492 and apply it for affected platforms. Bspec: 52890, 54369, 55378, 66624 v2: Adjust platforms where applied Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Mika Kahola <mika.kahola@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230124102636.2567292-2-jouni.hogander@intel.com
2023-01-26drm/i915/panel: move panel fixed EDID to struct intel_panelJani Nikula
It's a bit confusing to have two cached EDIDs in struct intel_connector with slightly different purposes. Make the distinction a bit clearer by moving the EDID cached for eDP and LVDS panels at connector init time to struct intel_panel, and name it fixed_edid. That's what it is, a fixed EDID for the panels. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/328350ef918638928a8286cdbab3107c8258332d.1674643465.git.jani.nikula@intel.com
2023-01-26drm/i915/opregion: convert intel_opregion_get_edid() to struct drm_edidJani Nikula
Simplify validation and use by converting to drm_edid. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/6abb01f1e97d54a3c11bec24377f035df412b492.1674643465.git.jani.nikula@intel.com
2023-01-26drm/i915/bios: convert intel_bios_init_panel() to drm_edidJani Nikula
Try to use struct drm_edid where possible, even if having to fall back to looking into struct edid down low via drm_edid_raw(). v2: Rebase Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/897807d62f74f690a173ecd405e25c6ccdd63b98.1674643465.git.jani.nikula@intel.com
2023-01-26drm/i915/edid: convert DP, HDMI and LVDS to drm_edidJani Nikula
Convert all the connectors that use cached connector edid and detect_edid to drm_edid. Since drm_get_edid() calls drm_connector_update_edid_property() while drm_edid_read*() do not, we need to call drm_edid_connector_update() separately, in part due to the EDID caching behaviour in HDMI and DP. Especially DP depends on the details parsed from EDID. (The big behavioural change conflating EDID reading with parsing and property update was done in commit 5186421cbfe2 ("drm: Introduce epoch counter to drm_connector")) v6: Rebase on drm_edid_connector_add_modes() v5: Fix potential uninitialized var use (kernel test robot <lkp@intel.com>) v4: Call drm_edid_connector_update() after reading HDMI/DP EDID v3: Don't leak vga switcheroo EDID in LVDS init (Ville) v2: Don't leak opregion fallback EDID (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/eabb4de932841b38b34cc2818ea9fbf7c10224fd.1674643465.git.jani.nikula@intel.com
generated by cgit v1.2.3 (git 2.25.1) at 2025-04-13 15:08:47 +0000