| Age | Commit message (Collapse) | Author |
|---|
|
Having the plane WM/DDB regitster write functions in skl_watermarks.c
is rather annoying when trying to implement DSB based plane updates.
Move them into the respective files that handle all other plane
register writes. Less places where I need to worry about the DSB
vs. MMIO decisions.
The downside is that we spread the wm struct details a bit further
afield. But if that becomes too annoying we can probably abstract
things a bit more with a few extra functions.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240510152329.24098-17-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Problem is that on some platforms, we do get QGV point mask in wrong
state on boot. However driver assumes it is set to 0
(i.e all points allowed), however in reality we might get them all
restricted, causing issues.
Lets disable SAGV initially to force proper QGV point state.
If more QGV points are available, driver will recalculate and update
those then after next commit.
v2: - Added trace to see which QGV/PSF GV point is used when SAGV is
disabled.
v3: - Move force disable function to intel_bw_init in order to initialize
bw state as well, so that hw/sw are immediately in sync after init.
v4: - Don't try sending PCode request, seems like it is not possible at
intel_bw_init, however assigning bw->state to be restricted as if
SAGV is off, still forces driveer to send PCode request anyway on
next modeset, so the solution still works.
However we still need to address the case, when no display is
connected, which anyway requires much more changes.
v5: - Put PCode request back and apply temporary hack to make the
request succeed(in case if there 2 PSF GV points with same BW, PCode
accepts only if both points are restricted/unrestricted same time)
- Fix argument sequence for adl_qgv_bw(Ville Syrjälä)
v6: - Fix wrong platform checks, not to break everything else.
v7: - Split the handling of quplicate QGV/PSF GV points (Vinod)
Restrict force disable to display version below 14 (Vinod)
v8: - Simplify icl_force_disable_sagv (Vinod)
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405113533.338553-5-vinod.govindapillai@intel.com
|
|
No point in throwing around u8 when we're dealing with
just an integer. Use a plain old boring 'int'.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-14-ville.syrjala@linux.intel.com
|
|
Currently we can't change MBUS join status without doing a modeset,
because we are lacking mechanism to synchronize those with vblank.
However then this means that we can't do a fastset, if there is a need
to change MBUS join state. Fix that by implementing such change.
We already call correspondent check and update at pre_plane dbuf update,
so the only thing left is to have a non-modeset version of that.
If active pipes stay the same then fastset is possible and only MBUS
join state/ddb allocation updates would be committed.
The full mbus/cdclk sequence will look as follows:
1. disable pipes
2. increase cdclk if necessary
2.1 reprogram cdclk
2.2 update dbuf tracker value
3. enable mbus joining if necessary
3.1 update mbus_ctl
3.2 update dbuf tracker value
4. reallocate dbuf for planes on active pipes
5. disable mbus joining if necessary
5.1 update dbuf tracker value
5.2 update mbus_ctl
6. enable pipes
7. decrease cdclk if necessary
7.1 update dbuf tracker value
7.2 reprogram cdclk
And in order to keep things in sync we need:
Step 2:
- mbus_join == old
- mdclk/cdclk ratio == new
Step 3:
- mbus_join == new
- mdclk/cdclk ratio == old when cdclk is changing in step 7
- mdclk/cdclk ratio == new when cdclk is changing in step 2
Step 5:
- mbus_join == new
- mdclk/cdclk ratio == old when cdclk is changing in step 7
- mdclk/cdclk ratio == new when cdclk is changing in step 2
Step 7:
- mbus_join == new
- mdclk/cdclk ratio == new
v2: - Removed redundant parentheses(Ville Syrjälä)
- Constified new_crtc_state in intel_mbus_joined_pipe(Ville Syrjälä)
- Removed pipe_select variable(Ville Syrjälä)
[v3: vsyrjala: Correctly sequence vs. cdclk updates,
properly describe the full sequence,
shuffle code around to make the diff more legible,
streamline a few things]
[v4: vsyrjala: Move the intel_cdclk_is_decreasing_later() stuff
to a separate patch]
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com> #v3
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Co-developed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-13-ville.syrjala@linux.intel.com
|
|
commit 64f6a5d1922b ("container_of: add container_of_const()
that preserves const-ness of the pointer") is nice. Let's use
it so that we don't accidentally cast away the const from our
state pointers.
The only thing I don't particularly like about container_of_const()
is that it still accepts void* in addition to the proper pointer
types, but that's how most other things in C work anyway so I
guess we can live with it.
And while at it rename the macro arguments to be a bit more
descriptive than just 'x'.
TODO: maybe convert *all* container_of() uses to container_of_const()?
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240307151810.24208-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Commit 394b4b7df9f7 ("drm/i915/lnl: Add CDCLK table") and commit
3d3696c0fed1 ("drm/i915/lnl: Start using CDCLK through PLL") started
adding support for CDCLK programming support for Xe2LPD. One final piece
is missing, which is the programming necessary for changed in the ratio
between MDCLK and CDCLK. Let's do that now.
BSpec instructs us to update MBUS_CTL and DBUF_CTL_S* registers when the
ratio between MDCLK and CDCLK changes. The updates must be done before
changing the CDCLK when decreasing the frequency; or after it when
increasing the frequency.
Ratio-related updates to MBUS_CTL also depend on the state of MBus
joining, so they are performed by either CDCLK change sequence or by
changes in MBus joining. Since one might happen independently of the
other, we need to make sure that both logics see the necessary state
values when programming that register. MBus joining logic needs to know
the MDCLK:CDCLK ratio and that's already provided via mdclk_cdclk_ratio
field of struct intel_dbuf_state.
For the CDCLK logic, we need to have something similar: we need to
propagate the status of MBus joining to struct intel_cdclk_state. Do
that by adding the field joined_mbus to struct intel_cdclk_config.
(Preferably, that field would be added to intel_cdclk_state, however
currently only intel_cdclk_config is passed down to the functions that
do the register programming. We might revisit this decision if we find
that refactoring the code to pass the whole intel_cdclk_state is worth
it.)
Bspec: 68864, 68868, 69090, 69482
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240312163639.172321-7-gustavo.sousa@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Xe2LPD always selects the CDCLK PLL as source for the MDCLK. Because of
that, the ratio between MDCLK and CDCLK is not be constant anymore. As
such, make sure to have the current ratio available in intel_dbuf_state
so that it can be used during dbuf programming.
Note that we write-lock the global state instead of serializing to a
hardware commit because a change in the ratio should be rather handled
in the CDCLK change sequence, which will need to take care of updating
the necessary registers in that case. We will implement that in upcoming
changes.
That said, changes in the MBus joining state should be handled by the
DBUF/MBUS logic, just like it is already done, but the logic will need
to know the ratio to properly update the registers.
v2:
- Make first sentence of commit message more intelligible. (Matt)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240312163639.172321-6-gustavo.sousa@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
If fixed refresh rate program the PKGC_LATENCY register
with the highest latency from level 1 and above LP registers
and program ADDED_WAKE_TIME = DSB execution time.
else program PKGC_LATENCY with all 1's and ADDED_WAKE_TIME as 0.
This is used to improve package C residency by sending the highest
latency tolerance requirement (LTR) when the planes are done with the
frame until the next frame programming window (set context latency,
window 2) starts.
Bspec: 68986
--v2
-Fix indentation [Chaitanya]
--v3
-Take into account if fixed refrersh rate or not [Vinod]
-Added wake time dependengt on DSB execution time [Vinod]
-Use REG_FIELD_PREP [Jani]
-Call program_pkgc_latency from appropriate place [Jani]
-no need for the ~0 while setting max latency [Jani]
-change commit message to add the new changes made in.
--v4
-Remove extra blank line [Vinod]
-move the vrr.enable check to previous loop [Vinod]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240219063638.1467114-1-suraj.kandpal@intel.com
|
|
There is never any reason to pass in both the crtc and its state
as one can always dig out the crtc from its state. But for more
consistency across the whole state checker let's just pass the
overall atomic state+crtc here as well.
v2: Also pass state+crtc here (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231005122713.3531-1-ville.syrjala@linux.intel.com
|
|
The skl+ wm state checker has no reason to modify the crtc state,
so make it const.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231004155607.7719-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
The DSB code will want to know the maximum PkgC latency
it has to contend with. Add a helper to expose that
information.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230606191504.18099-16-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
|
|
The file was never really about pm types, and now it's even more
obvious. Move under display as intel_wm_types.h.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230215141910.433043-4-jani.nikula@intel.com
|
|
Get rid of the if ladder in intel_modeset_setup_hw_state() and hide a
number of functions by adding a .get_hw_state() hook to watermark
functions. At least for now, combine the platform specific sanitization
to the hw state readouts on the relevant platforms instead of adding a
separate hook for that.
There's a functional change on PCH split platforms: If i9xx_wm_init()
fails to read plane latency and chooses the nop functions,
ilk_wm_get_hw_state() won't get called for readout. Add the
ilk_init_lp_watermarks() call on that path which now won't be called in
.get_hw_state(), as it looks like the only thing that could make a
difference.
v2:
- Add missing static (kernel test robot)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6da32831e40606cc8b90491b83196917f2ce36ab.1676317696.git.jani.nikula@intel.com
|
|
Since SAGV is controlled via unidirectional pcode commands
we have no way to query the current state. So instead let's
expose the last programmed state via debugfs. This way we
can at least know whether SAGV should be enabled or not
(which can be important to know when dealing with underruns/etc.).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230131002127.29305-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Move a handful of key enums to a new file intel_display_limits.h. These
are the enum types, and the MAX/NUM enumerations within them, that are
used in other headers. Otherwise, there's no common theme between them.
Replace intel_display.h include with intel_display_limit.h where
relevant, and add the intel_display.h include directly in the .c files
where needed.
Since intel_display.h is used almost everywhere in display/, include it
from intel_display_types.h to avoid massive changes across the
board. There are very few files that would need intel_display_types.h
but not intel_display.h so this is neglible, and further cleanup between
these headers can be left for the future.
Overall this change drops the direct and indirect dependencies on
intel_display.h from about 300 to about 100 compilation units, because
we can drop the include from i915_drv.h.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230116164644.1752009-1-jani.nikula@intel.com
|
|
Follow the new direction for debugfs files, moving the details where the
implementation is. It seems quite natural skl_watermark.c is the place
that controls IPC details, even for debugfs, not
intel_display_debugfs.c.
Rename the functions and convert dev_priv->i915 while at it.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9d59b18f5dc06e86a48c1ce0f40d625f51e3e85a.1662983005.git.jani.nikula@intel.com
|
|
Rename the IPC functions to have skl_watermark_ipc_ prefix, rename
enable to update to reflect what the function actually does, and add
enabled function to abstract direct ->ipc_enabled access for state
query.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/536237d5bc919e8c97a96796f235f5bb264ceff2.1662983005.git.jani.nikula@intel.com
|
|
Pull all the skl+ watermark code (and the dbuf/sagv/ipc code
since it's all sort of intertwined and I'm too lazy to think
of a finer grained split right now) into its own file from the
catch-all intel_pm.c.
Also sneak in the s/dev_priv/i915/ rename while at it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908191646.20239-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
