| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git into fixes
Microchip RISC-V devicetree fixes for 6.0-rc3
Two sets of fixes this time around:
- A fix for the interrupt ordering of the l2-cache controller. If the
driver is enabled, it would spam the console /constantly/, rendering
the system useless.
- General cleanup for some bogus properties in the dt, part of my quest
for zero dtbs_check warnings.
On that note, the interrupt ordering adds a dtbs_check warning - but I
considered that fixing the potentially useless system was more of a
priority.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'dt-fixes-for-palmer-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git:
riscv: dts: microchip: mpfs: remove pci axi address translation property
riscv: dts: microchip: mpfs: remove bogus card-detect-delay
riscv: dts: microchip: mpfs: remove ti,fifo-depth property
riscv: dts: microchip: mpfs: fix incorrect pcie child node name
riscv: dts: microchip: correct L2 cache interrupts
|
|
Mark both the function prototype and definition as noreturn in order to
prevent the compiler from doing transformations which confuse objtool
like so:
vmlinux.o: warning: objtool: sme_enable+0x71: unreachable instruction
This triggers with gcc-12.
Add it and sev_es_terminate() to the objtool noreturn tracking array
too. Sort it while at it.
Suggested-by: Michael Matz <matz@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220824152420.20547-1-bp@alien8.de
|
|
For non-protection pXd_none() page faults in do_dat_exception(), we
call do_exception() with access == (VM_READ | VM_WRITE | VM_EXEC).
In do_exception(), vma->vm_flags is checked against that before
calling handle_mm_fault().
Since commit 92f842eac7ee3 ("[S390] store indication fault optimization"),
we call handle_mm_fault() with FAULT_FLAG_WRITE, when recognizing that
it was a write access. However, the vma flags check is still only
checking against (VM_READ | VM_WRITE | VM_EXEC), and therefore also
calling handle_mm_fault() with FAULT_FLAG_WRITE in cases where the vma
does not allow VM_WRITE.
Fix this by changing access check in do_exception() to VM_WRITE only,
when recognizing write access.
Link: https://lkml.kernel.org/r/20220811103435.188481-3-david@redhat.com
Fixes: 92f842eac7ee3 ("[S390] store indication fault optimization")
Cc: <stable@vger.kernel.org>
Reported-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The pointers for guarded storage and runtime instrumentation control
blocks are stored in the thread_struct of the associated task. These
pointers are initially copied on fork() via arch_dup_task_struct()
and then cleared via copy_thread() before fork() returns. If fork()
happens to fail after the initial task dup and before copy_thread(),
the newly allocated task and associated thread_struct memory are
freed via free_task() -> arch_release_task_struct(). This results in
a double free of the guarded storage and runtime info structs
because the fields in the failed task still refer to memory
associated with the source task.
This problem can manifest as a BUG_ON() in set_freepointer() (with
CONFIG_SLAB_FREELIST_HARDENED enabled) or KASAN splat (if enabled)
when running trinity syscall fuzz tests on s390x. To avoid this
problem, clear the associated pointer fields in
arch_dup_task_struct() immediately after the new task is copied.
Note that the RI flag is still cleared in copy_thread() because it
resides in thread stack memory and that is where stack info is
copied.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Fixes: 8d9047f8b967c ("s390/runtime instrumentation: simplify task exit handling")
Fixes: 7b83c6297d2fc ("s390/guarded storage: simplify task exit handling")
Cc: <stable@vger.kernel.org> # 4.15
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20220816155407.537372-1-bfoster@redhat.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Commit c70727a5bc18 ("xen: allow more than 512 GB of RAM for 64 bit
pv-domains") from July 2015 replaces the config XEN_MAX_DOMAIN_MEMORY with
a new config XEN_512GB, but misses to adjust arch/x86/configs/xen.config.
As XEN_512GB defaults to yes, there is no need to explicitly set any config
in xen.config.
Just remove setting the obsolete config XEN_MAX_DOMAIN_MEMORY.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220817044333.22310-1-lukas.bulwahn@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Commit d92725256b4f22d0 ("mm: avoid unnecessary page fault retires on
shared memory types") modifies do_page_fault() to handle the VM_FAULT_
COMPLETED case, but forget to change for LoongArch, so fix it as other
architectures does.
Fixes: d92725256b4f22d0 ("mm: avoid unnecessary page fault retires on shared memory types")
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
LoongArch only support 32-bit/64-bit xchg/cmpxchg in native. But percpu
operation, qspinlock and some drivers need 8-bit/16-bit xchg/cmpxchg. We
add subword xchg/cmpxchg emulation in this patch because the emulation
has better performance than the generic implementation (on NUMA system),
and it can fix some build errors meanwhile [1].
LoongArch's guarantee for forward progress (avoid many ll/sc happening
at the same time and no one succeeds):
We have the "exclusive access (with timeout) of ll" feature to avoid
simultaneous ll (which also blocks other memory load/store on the same
address), and the "random delay of sc" feature to avoid simultaneous
sc. It is a mandatory requirement for multi-core LoongArch processors
to implement such features, only except those single-core and dual-core
processors (they also don't support multi-chip interconnection).
Feature bits are introduced in CPUCFG3, bit 3 and bit 4 [2].
[1] https://lore.kernel.org/loongarch/CAAhV-H6vvkuOzy8OemWdYK3taj5Jn3bFX0ZTwE=twM8ywpBUYA@mail.gmail.com/T/#t
[2] https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#_cpucfg
Reported-by: Sudip Mukherjee (Codethink) <sudipm.mukherjee@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Rui Wang <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
When enable GENERIC_IOREMAP, there will be circular dependency to cause
build errors. The root cause is that pgtable.h shouldn't include io.h
but pgtable.h need some macros defined in io.h. So cleanup those macros
and remove the unnecessary inclusions, as other architectures do.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Cleanup reset routines by using new do_kernel_power_off() instead of old
pm_power_off(), and then simplify the whole file (reset.c) organization
by inlining some functions. This cleanup also fix a poweroff error if EFI
runtime is disabled.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Fix build warnings in VDSO as below:
arch/loongarch/vdso/vgettimeofday.c:9:5: warning: no previous prototype for '__vdso_clock_gettime' [-Wmissing-prototypes]
9 | int __vdso_clock_gettime(clockid_t clock,
| ^~~~~~~~~~~~~~~~~~~~
arch/loongarch/vdso/vgettimeofday.c:15:5: warning: no previous prototype for '__vdso_gettimeofday' [-Wmissing-prototypes]
15 | int __vdso_gettimeofday(struct __kernel_old_timeval *tv,
| ^~~~~~~~~~~~~~~~~~~
arch/loongarch/vdso/vgettimeofday.c:21:5: warning: no previous prototype for '__vdso_clock_getres' [-Wmissing-prototypes]
21 | int __vdso_clock_getres(clockid_t clock_id,
| ^~~~~~~~~~~~~~~~~~~
arch/loongarch/vdso/vgetcpu.c:27:5: warning: no previous prototype for '__vdso_getcpu' [-Wmissing-prototypes]
27 | int __vdso_getcpu(unsigned int *cpu, unsigned int *node, struct getcpu_cache *unused)
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
PCI_LOONGSON is a mandatory for LoongArch and it is selected in Kconfig
unconditionally, but its dependency PCI_QUIRKS is missing and may cause
a build error when "make randconfig":
arch/loongarch/pci/acpi.c: In function 'pci_acpi_setup_ecam_mapping':
>> arch/loongarch/pci/acpi.c:103:29: error: 'loongson_pci_ecam_ops' undeclared (first use in this function)
103 | ecam_ops = &loongson_pci_ecam_ops;
| ^~~~~~~~~~~~~~~~~~~~~
arch/loongarch/pci/acpi.c:103:29: note: each undeclared identifier is reported only once for each function it appears in
Kconfig warnings: (for reference only)
WARNING: unmet direct dependencies detected for PCI_LOONGSON
Depends on [n]: PCI [=y] && (MACH_LOONGSON64 [=y] || COMPILE_TEST [=y]) && (OF [=y] || ACPI [=y]) && PCI_QUIRKS [=n]
Selected by [y]:
- LOONGARCH [=y]
Fix it by selecting PCI_QUIRKS unconditionally, too.
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
When running identity-mapped and depending on the kernel configuration,
it is possible that the compiler uses jump tables when generating code
for cc_platform_has().
This causes a boot failure because the jump table uses un-mapped kernel
virtual addresses, not identity-mapped addresses. This has been seen
with CONFIG_RETPOLINE=n.
Similar to sme_encrypt_kernel(), use an open-coded direct check for the
status of SNP rather than trying to eliminate the jump table. This
preserves any code optimization in cc_platform_has() that can be useful
post boot. It also limits the changes to SEV-specific files so that
future compiler features won't necessarily require possible build changes
just because they are not compatible with running identity-mapped.
[ bp: Massage commit message. ]
Fixes: 5e5ccff60a29 ("x86/sev: Add helper for validating pages in early enc attribute changes")
Reported-by: Sean Christopherson <seanjc@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org> # 5.19.x
Link: https://lore.kernel.org/all/YqfabnTRxFSM+LoX@google.com/
|
|
In some cases, bootloaders will leave boot_params->cc_blob_address
uninitialized rather than zeroing it out. This field is only meant to be
set by the boot/compressed kernel in order to pass information to the
uncompressed kernel when SEV-SNP support is enabled.
Therefore, there are no cases where the bootloader-provided values
should be treated as anything other than garbage. Otherwise, the
uncompressed kernel may attempt to access this bogus address, leading to
a crash during early boot.
Normally, sanitize_boot_params() would be used to clear out such fields
but that happens too late: sev_enable() may have already initialized
it to a valid value that should not be zeroed out. Instead, have
sev_enable() zero it out unconditionally beforehand.
Also ensure this happens for !CONFIG_AMD_MEM_ENCRYPT as well by also
including this handling in the sev_enable() stub function.
[ bp: Massage commit message and comments. ]
Fixes: b190a043c49a ("x86/sev: Add SEV-SNP feature detection/setup")
Reported-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Reported-by: watnuss@gmx.de
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216387
Link: https://lore.kernel.org/r/20220823160734.89036-1-michael.roth@amd.com
|
|
An AXI master address translation table property was inadvertently
added to the device tree & this was not caught by dtbs_check at the
time. Remove the property - it should not be in mpfs.dtsi anyway as
it would be more suitable in -fabric.dtsi nor does it actually apply
to the version of the reference design we are using for upstream.
Link: https://www.microsemi.com/document-portal/doc_download/1245812-polarfire-fpga-and-polarfire-soc-fpga-pci-express-user-guide # Section 1.3.3
Fixes: 528a5b1f2556 ("riscv: dts: microchip: add new peripherals to icicle kit device tree")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Recent versions of dt-schema warn about a previously undetected
undocumented property:
arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dtb: mmc@20008000: Unevaluated properties are not allowed ('card-detect-delay' was unexpected)
From schema: Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
There are no GPIOs connected to MSSIO6B4 pin K3 so adding the common
cd-debounce-delay-ms property makes no sense. The Cadence IP has a
register that sets the card detect delay as "DP * tclk". On MPFS, this
clock frequency is not configurable (it must be 200 MHz) & the FPGA
comes out of reset with this register already set.
Fixes: bc47b2217f24 ("riscv: dts: microchip: add the sundance polarberry")
Fixes: 0fa6107eca41 ("RISC-V: Initial DTS for Microchip ICICLE board")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Recent versions of dt-schema warn about a previously undetected
undocument property on the icicle & polarberry devicetrees:
arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dtb: ethernet@20112000: ethernet-phy@8: Unevaluated properties are not allowed ('ti,fifo-depth' was unexpected)
From schema: Documentation/devicetree/bindings/net/cdns,macb.yaml
I know what you're thinking, the binding doesn't look to be the problem
and I agree. I am not sure why a TI vendor property was ever actually
added since it has no meaning... just get rid of it.
Fixes: bc47b2217f24 ("riscv: dts: microchip: add the sundance polarberry")
Fixes: 0fa6107eca41 ("RISC-V: Initial DTS for Microchip ICICLE board")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Recent versions of dt-schema complain about the PCIe controller's child
node name:
arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dtb: pcie@2000000000: Unevaluated properties are not allowed ('clock-names', 'clocks', 'legacy-interrupt-controller', 'microchip,axi-m-atr0' were unexpected)
From schema: Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml
Make the dts match the correct property name in the dts.
Fixes: 528a5b1f2556 ("riscv: dts: microchip: add new peripherals to icicle kit device tree")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
"Some interesting background to the current patchset:
It turned out that the fldw instruction (which loads a 32-bit word
from memory into one half of a FP register) failed on unaligned
addresses and even trashed some other random FP register instead. It's
a trivial one-liner fix in the exception handler but this failure
dates back to the very beginnings of the parisc-port. It's strange
that it was never noticed before.
Another patch fixes an annoyance noticed by Randy Dunlap. Running
"make ARCH=parisc64 randconfig" always returned a 32-bit config,
although one would expect a 64-bit config. Masahiro Yamada suggested
to mimik sparc Kconfig code, which fixed the issue nicely. This
allowed to drop some compiler build checks too.
Third, it's possible to build an optimized 32-bit kernel for PA8X00
(64-bit) CPUs, which then wouldn't start on 32-bit-only (PA1.x)
machines. I've added a bootup check which prevents that and which
prints a message to the console. This can be tested with qemu, which
currently only supports 32-bit emulation.
The other patches are usual clean-up stuff like added return value
checks and typo fixes in comments.
Summary:
- Fix emulation of fldw instruction on unaligned addresses
- Fix "make ARCH=parisc64 randconfig" to return a 64-bit config
- Prevent boot if trying to boot a 32-bit kernel compiled for PA8X00
CPUs on 32-bit only machines
- ccio-dma: Handle kmalloc failure in ccio_init_resources()"
* tag 'parisc-for-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Add runtime check to prevent PA2.0 kernels on PA1.x machines
parisc: ccio-dma: Handle kmalloc failure in ccio_init_resources()
parisc: led: Move from strlcpy with unused retval to strscpy
parisc: ccio-dma: Fix typo in comment
Revert "parisc: Show error if wrong 32/64-bit compiler is being used"
parisc: Make CONFIG_64BIT available for ARCH=parisc64 only
parisc: Fix exception handler for fldw and fstw instructions
|
|
Note1: Model 0xB7 already claimed the "no suffix" #define for a regular
client part, so add (yet another) suffix "S" to distinguish this new
part from the earlier one.
Note2: the RAPTORLAKE* and ALDERLAKE* processors are very similar from a
software enabling point of view. There are no known features that have
model-specific enabling and also differ between the two. In other words,
every single place that list *one* or more RAPTORLAKE* or ALDERLAKE*
processors should list all of them.
Note3: This is being merged before there is an in-tree user. Merging
this provides an "anchor" so that the different folks can update their
subsystems (like perf) in parallel to use this define and test it.
[ dhansen: add a note about why this has no in-tree users yet ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220823174819.223941-1-tony.luck@intel.com
|
|
Currently as part of handling a SME access trap we flush the SVE register
state. This is not needed and would corrupt register state if the task has
access to the SVE registers already. For non-streaming mode accesses the
required flushing will be done in the SVE access trap. For streaming
mode SVE register accesses the architecture guarantees that the register
state will be flushed when streaming mode is entered or exited so there is
no need for us to do so. Simply remove the register initialisation.
Fixes: 8bd7f91c03d8 ("arm64/sme: Implement traps and syscall handling for SME")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220817182324.638214-5-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Currently when taking a SME access trap we allocate storage for the SVE
register state in order to be able to handle storage of streaming mode SVE.
Due to the original usage in a purely SVE context the SVE register state
allocation this also flushes the register state for SVE if storage was
already allocated but in the SME context this is not desirable. For a SME
access trap to be taken the task must not be in streaming mode so either
there already is SVE register state present for regular SVE mode which would
be corrupted or the task does not have TIF_SVE and the flush is redundant.
Fix this by adding a flag to sve_alloc() indicating if we are in a SVE
context and need to flush the state. Freshly allocated storage is always
zeroed either way.
Fixes: 8bd7f91c03d8 ("arm64/sme: Implement traps and syscall handling for SME")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220817182324.638214-4-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When handling a signal delivered to a context with streaming mode enabled
we will disable streaming mode for the signal handler, when doing so we
should also flush the saved FPSIMD register state like exiting streaming
mode in the hardware would do so that if that state is reloaded we get the
same behaviour. Without this we will reload whatever the last FPSIMD state
that was saved for the task was.
Fixes: 40a8e87bb328 ("arm64/sme: Disable ZA and streaming mode when handling signals")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220817182324.638214-3-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The signal code has a limit of 64K on the size of a stack frame that it
will generate, if this limit is exceeded then a process will be killed if
it receives a signal. Unfortunately with the advent of SME this limit is
too small - the maximum possible size of the ZA register alone is 64K. This
is not an issue for practical systems at present but is easily seen using
virtual platforms.
Raise the limit to 256K, this is substantially more than could be used by
any current architecture extension.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220817182324.638214-2-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Ard noticed that since we converted CTR_EL0 to automatic generation we have
been seeing errors on some systems handling the value of cache_type_cwg()
such as
CPU features: No Cache Writeback Granule information, assuming 128
This is because the manual definition of CTR_EL0_CWG_MASK was done without
a shift while our convention is to define the mask after shifting. This
means that the user in cache_type_cwg() was broken as it was written for
the manually written shift then mask. Fix this by converting to use
SYS_FIELD_GET().
The only other field where the _MASK for this register is used is IminLine
which is at offset 0 so unaffected.
Fixes: 9a3634d02301 ("arm64/sysreg: Convert CTR_EL0 to automatic generation")
Reported-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220818213613.733091-4-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The SYS_FIELD_ macros are not safe for assembly contexts, move them inside
the guarded section.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220818213613.733091-3-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The SYS_FIELD_ macros in sysreg.h use definitions from bitfield.h but there
is no direct inclusion of it, add one to ensure that sysreg.h is directly
usable.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220818213613.733091-2-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
fw_level
Though acpi_find_last_cache_level() always returned signed value and the
document states it will return any errors caused by lack of a PPTT table,
it never returned negative values before.
Commit 0c80f9e165f8 ("ACPI: PPTT: Leave the table mapped for the runtime usage")
however changed it by returning -ENOENT if no PPTT was found. The value
returned from acpi_find_last_cache_level() is then assigned to unsigned
fw_level.
It will result in the number of cache leaves calculated incorrectly as
a huge value which will then cause the following warning from __alloc_pages
as the order would be great than MAX_ORDER because of incorrect and huge
cache leaves value.
| WARNING: CPU: 0 PID: 1 at mm/page_alloc.c:5407 __alloc_pages+0x74/0x314
| Modules linked in:
| CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.19.0-10393-g7c2a8d3ac4c0 #73
| pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : __alloc_pages+0x74/0x314
| lr : alloc_pages+0xe8/0x318
| Call trace:
| __alloc_pages+0x74/0x314
| alloc_pages+0xe8/0x318
| kmalloc_order_trace+0x68/0x1dc
| __kmalloc+0x240/0x338
| detect_cache_attributes+0xe0/0x56c
| update_siblings_masks+0x38/0x284
| store_cpu_topology+0x78/0x84
| smp_prepare_cpus+0x48/0x134
| kernel_init_freeable+0xc4/0x14c
| kernel_init+0x2c/0x1b4
| ret_from_fork+0x10/0x20
Fix the same by changing fw_level to be signed integer and return the
error from init_cache_level() early in case of error.
Reported-and-Tested-by: Bruno Goncalves <bgoncalv@redhat.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20220808084640.3165368-1-sudeep.holla@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The AMU counter AMEVCNTR01 (constant counter) should increment at the same
rate as the system counter. On affected Cortex-A510 cores, AMEVCNTR01
increments incorrectly giving a significantly higher output value. This
results in inaccurate task scheduler utilization tracking and incorrect
feedback on CPU frequency.
Work around this problem by returning 0 when reading the affected counter
in key locations that results in disabling all users of this counter from
using it either for frequency invariance or as FFH reference counter. This
effect is the same to firmware disabling affected counters.
Details on how the two features are affected by this erratum:
- AMU counters will not be used for frequency invariance for affected
CPUs and CPUs in the same cpufreq policy. AMUs can still be used for
frequency invariance for unaffected CPUs in the system. Although
unlikely, if no alternative method can be found to support frequency
invariance for affected CPUs (cpufreq based or solution based on
platform counters) frequency invariance will be disabled. Please check
the chapter on frequency invariance at
Documentation/scheduler/sched-capacity.rst for details of its effect.
- Given that FFH can be used to fetch either the core or constant counter
values, restrictions are lifted regarding any of these counters
returning a valid (!0) value. Therefore FFH is considered supported
if there is a least one CPU that support AMUs, independent of any
counters being disabled or affected by this erratum. Clarifying
comments are now added to the cpc_ffh_supported(), cpu_read_constcnt()
and cpu_read_corecnt() functions.
The above is achieved through adding a new erratum: ARM64_ERRATUM_2457168.
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20220819103050.24211-1-ionela.voinescu@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
On arm64, "rodata=full" has been suppored (but not documented) since
commit:
c55191e96caa9d78 ("arm64: mm: apply r/o permissions of VM areas to its linear alias as well")
As it's necessary to determine the rodata configuration early during
boot, arm64 has an early_param() handler for this, whereas init/main.c
has a __setup() handler which is run later.
Unfortunately, this split meant that since commit:
f9a40b0890658330 ("init/main.c: return 1 from handled __setup() functions")
... passing "rodata=full" would result in a spurious warning from the
__setup() handler (though RO permissions would be configured
appropriately).
Further, "rodata=full" has been broken since commit:
0d6ea3ac94ca77c5 ("lib/kstrtox.c: add "false"/"true" support to kstrtobool()")
... which caused strtobool() to parse "full" as false (in addition to
many other values not documented for the "rodata=" kernel parameter.
This patch fixes this breakage by:
* Moving the core parameter parser to an __early_param(), such that it
is available early.
* Adding an (optional) arch hook which arm64 can use to parse "full".
* Updating the documentation to mention that "full" is valid for arm64.
* Having the core parameter parser handle "on" and "off" explicitly,
such that any undocumented values (e.g. typos such as "ful") are
reported as errors rather than being silently accepted.
Note that __setup() and early_param() have opposite conventions for
their return values, where __setup() uses 1 to indicate a parameter was
handled and early_param() uses 0 to indicate a parameter was handled.
Fixes: f9a40b089065 ("init/main.c: return 1 from handled __setup() functions")
Fixes: 0d6ea3ac94ca ("lib/kstrtox.c: add "false"/"true" support to kstrtobool()")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jagdish Gediya <jvgediya@linux.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220817154022.3974645-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Replace wrong 'FIQ EL1h' comment with 'FIQ EL1t'.
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Link: https://lore.kernel.org/r/20220721030531.21234-1-Kuan-Ying.Lee@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
If a 32-bit kernel was compiled for PA2.0 CPUs, it won't be able to run
on machines with PA1.x CPUs. Add a check and bail out early if a PA1.x
machine is detected.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
This reverts commit b160628e9ebcdc85d0db9d7f423c26b3c7c179d0.
There is no need any longer to have this sanity check, because the
previous commit ("parisc: Make CONFIG_64BIT available for ARCH=parisc64
only") prevents that CONFIG_64BIT is set if ARCH==parisc.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
With this patch the ARCH= parameter decides if the
CONFIG_64BIT option will be set or not. This means, the
ARCH= parameter will give:
ARCH=parisc -> 32-bit kernel
ARCH=parisc64 -> 64-bit kernel
This simplifies the usage of the other config options like
randconfig, allmodconfig and allyesconfig a lot and produces
the output which is expected for parisc64 (64-bit) vs. parisc (32-bit).
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Cc: <stable@vger.kernel.org> # 5.15+
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
"Misc irqchip fixes: LoongArch driver fixes and a Hyper-V IOMMU fix"
* tag 'irq-urgent-2022-08-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/loongson-liointc: Fix an error handling path in liointc_init()
irqchip/loongarch: Fix irq_domain_alloc_fwnode() abuse
irqchip/loongson-pch-pic: Move find_pch_pic() into CONFIG_ACPI
irqchip/loongson-eiointc: Fix a build warning
irqchip/loongson-eiointc: Fix irq affinity setting
iommu/hyper-v: Use helper instead of directly accessing affinity
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 kprobes fix from Ingo Molnar:
"Fix a kprobes bug in JNG/JNLE emulation when a kprobe is installed at
such instructions, possibly resulting in incorrect execution (the
wrong branch taken)"
* tag 'perf-urgent-2022-08-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kprobes: Fix JNG/JNLE emulation
|
|
GCC has supported asm goto since 4.5, and Clang has since version 9.0.0.
The minimum supported versions of these tools for the build according to
Documentation/process/changes.rst are 5.1 and 11.0.0 respectively.
Remove the feature detection script, Kconfig option, and clean up some
fallback code that is no longer supported.
The removed script was also testing for a GCC specific bug that was
fixed in the 4.7 release.
Also remove workarounds for bpftrace using clang older than 9.0.0, since
other BPF backend fixes are required at this point.
Link: https://lore.kernel.org/lkml/CAK7LNATSr=BXKfkdW8f-H5VT_w=xBpT2ZQcZ7rm6JfkdE+QnmA@mail.gmail.com/
Link: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=48637
Acked-by: Borislav Petkov <bp@suse.de>
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When meeting ftrace trampolines in ORC unwinding, unwinder uses address
of ftrace_{regs_}call address to find the ORC entry, which gets next frame at
sp+176.
If there is an IRQ hitting at sub $0xa8,%rsp, the next frame should be
sp+8 instead of 176. It makes unwinder skip correct frame and throw
warnings such as "wrong direction" or "can't access registers", etc,
depending on the content of the incorrect frame address.
By adding the base address ftrace_{regs_}caller with the offset
*ip - ops->trampoline*, we can get the correct address to find the ORC entry.
Also change "caller" to "tramp_addr" to make variable name conform to
its content.
[ mingo: Clarified the changelog a bit. ]
Fixes: 6be7fa3c74d1 ("ftrace, orc, x86: Handle ftrace dynamically allocated trampolines")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220819084334.244016-1-chenzhongjin@huawei.com
|
|
The exception handler is broken for unaligned memory acceses with fldw
and fstw instructions, because it trashes or uses randomly some other
floating point register than the one specified in the instruction word
on loads and stores.
The instruction "fldw 0(addr),%fr22L" (and the other fldw/fstw
instructions) encode the target register (%fr22) in the rightmost 5 bits
of the instruction word. The 7th rightmost bit of the instruction word
defines if the left or right half of %fr22 should be used.
While processing unaligned address accesses, the FR3() define is used to
extract the offset into the local floating-point register set. But the
calculation in FR3() was buggy, so that for example instead of %fr22,
register %fr12 [((22 * 2) & 0x1f) = 12] was used.
This bug has been since forever in the parisc kernel and I wonder why it
wasn't detected earlier. Interestingly I noticed this bug just because
the libime debian package failed to build on *native* hardware, while it
successfully built in qemu.
This patch corrects the bitshift and masking calculation in FR3().
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Fix a KVM crash on z12 and older machines caused by a wrong
assumption that Query AP Configuration Information is always
available.
- Lower severity of excessive Hypervisor filesystem error messages
when booting under KVM.
* tag 's390-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/ap: fix crash on older machines based on QCI info missing
s390/hypfs: avoid error message under KVM
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix atomic sleep warnings at boot due to get_phb_number() taking a
mutex with a spinlock held on some machines.
- Add missing PMU selftests to .gitignores.
Thanks to Guenter Roeck and Russell Currey.
* tag 'powerpc-6.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Add missing PMU selftests to .gitignores
powerpc/pci: Fix get_phb_number() locking
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix to make the ISA extension static keys writable after init. This
manifests at least as a crash when loading modules (including KVM).
- A fixup for a build warning related to a poorly formed comment in our
perf driver.
* tag 'riscv-for-linus-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
perf: riscv legacy: fix kerneldoc comment warning
riscv: Ensure isa-ext static keys are writable
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix unexpected sign extension of KVM_ARM_DEVICE_ID_MASK
- Tidy-up handling of AArch32 on asymmetric systems
x86:
- Fix 'missing ENDBR' BUG for fastop functions
Generic:
- Some cleanup and static analyzer patches
- More fixes to KVM_CREATE_VM unwind paths"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: Drop unnecessary initialization of "ops" in kvm_ioctl_create_device()
KVM: Drop unnecessary initialization of "npages" in hva_to_pfn_slow()
x86/kvm: Fix "missing ENDBR" BUG for fastop functions
x86/kvm: Simplify FOP_SETCC()
x86/ibt, objtool: Add IBT_NOSEAL()
KVM: Rename mmu_notifier_* to mmu_invalidate_*
KVM: Rename KVM_PRIVATE_MEM_SLOTS to KVM_INTERNAL_MEM_SLOTS
KVM: MIPS: remove unnecessary definition of KVM_PRIVATE_MEM_SLOTS
KVM: Move coalesced MMIO initialization (back) into kvm_create_vm()
KVM: Unconditionally get a ref to /dev/kvm module when creating a VM
KVM: Properly unwind VM creation if creating debugfs fails
KVM: arm64: Reject 32bit user PSTATE on asymmetric systems
KVM: arm64: Treat PMCR_EL1.LC as RES1 on asymmetric systems
KVM: arm64: Fix compile error due to sign extension
|
|
According to the latest event list, the LOAD_LATENCY PEBS event only
works on the GP counter 0 and 1 for ADL and RPL.
Update the pebs event constraints table.
Fixes: f83d2f91d259 ("perf/x86/intel: Add Alder Lake Hybrid support")
Reported-by: Ammy Yi <ammy.yi@intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20220818184429.2355857-1-kan.liang@linux.intel.com
|
|
With the existing code in store_latency_data(), the memory operation (mem_op)
returned to the user is always OP_LOAD where in fact, it should be OP_STORE.
This comes from the fact that the function is simply grabbing the information
from a data source map which covers only load accesses. Intel 12th gen CPU
offers precise store sampling that captures both the data source and latency.
Therefore it can use the data source mapping table but must override the
memory operation to reflect stores instead of loads.
Fixes: 61b985e3e775 ("perf/x86/intel: Add perf core PMU support for Sapphire Rapids")
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220818054613.1548130-1-eranian@google.com
|
|
The SDM explicitly states that PEBS Baseline implies Extended PEBS.
For cpu model forward compatibility (e.g. on ICX, SPR, ADL), it's
safe to stop doing FMS table thing such as setting pebs_capable and
PMU_FL_PEBS_ALL since it's already set in the intel_ds_init().
The Goldmont Plus is the only platform which supports extended PEBS
but doesn't have Baseline. Keep the status quo.
Reported-by: Like Xu <likexu@tencent.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lkml.kernel.org/r/20220816114057.51307-1-likexu@tencent.com
|
|
On the platform with Arch LBR, the HW raw branch type encoding may leak
to the perf tool when the SAVE_TYPE option is not set.
In the intel_pmu_store_lbr(), the HW raw branch type is stored in
lbr_entries[].type. If the SAVE_TYPE option is set, the
lbr_entries[].type will be converted into the generic PERF_BR_* type
in the intel_pmu_lbr_filter() and exposed to the user tools.
But if the SAVE_TYPE option is NOT set by the user, the current perf
kernel doesn't clear the field. The HW raw branch type leaks.
There are two solutions to fix the issue for the Arch LBR.
One is to clear the field if the SAVE_TYPE option is NOT set.
The other solution is to unconditionally convert the branch type and
expose the generic type to the user tools.
The latter is implemented here, because
- The branch type is valuable information. I don't see a case where
you would not benefit from the branch type. (Stephane Eranian)
- Not having the branch type DOES NOT save any space in the
branch record (Stephane Eranian)
- The Arch LBR HW can retrieve the common branch types from the
LBR_INFO. It doesn't require the high overhead SW disassemble.
Fixes: 47125db27e47 ("perf/x86/intel/lbr: Support Architectural LBR")
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20220816125612.2042397-1-kan.liang@linux.intel.com
|
|
Commit c164fbb40c43f("x86/mm: thread pgprot_t through
init_memory_mapping()") mistakenly used __pgprot() which doesn't respect
__default_kernel_pte_mask when setting PUD mapping.
Fix it by only setting the one bit we actually need (PSE) and leaving
the other bits (that have been properly masked) alone.
Fixes: c164fbb40c43 ("x86/mm: thread pgprot_t through init_memory_mapping()")
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Turns out that i386 doesn't unconditionally have LFENCE, as such the
loop in __FILL_RETURN_BUFFER isn't actually speculation safe on such
chips.
Fixes: ba6e31af2be9 ("x86/speculation: Add LFENCE to RSB fill sequence")
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/Yv9tj9vbQ9nNlXoY@worktop.programming.kicks-ass.net
|
|
Commit 2b1299322016 ("x86/speculation: Add RSB VM Exit protections")
made a right mess of the RSB stuffing, rewrite the whole thing to not
suck.
Thanks to Andrew for the enlightening comment about Post-Barrier RSB
things so we can make this code less magical.
Cc: stable@vger.kernel.org
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/YvuNdDWoUZSBjYcm@worktop.programming.kicks-ass.net
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.0, take #1
- Fix unexpected sign extension of KVM_ARM_DEVICE_ID_MASK
- Tidy-up handling of AArch32 on asymmetric systems
|
