| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is a small set of driver core changes for 6.13-rc1.
Nothing major for this merge cycle, except for the two simple merge
conflicts are here just to make life interesting.
Included in here are:
- sysfs core changes and preparations for more sysfs api cleanups
that can come through all driver trees after -rc1 is out
- fw_devlink fixes based on many reports and debugging sessions
- list_for_each_reverse() removal, no one was using it!
- last-minute seq_printf() format string bug found and fixed in many
drivers all at once.
- minor bugfixes and changes full details in the shortlog"
* tag 'driver-core-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (35 commits)
Fix a potential abuse of seq_printf() format string in drivers
cpu: Remove spurious NULL in attribute_group definition
s390/con3215: Remove spurious NULL in attribute_group definition
perf: arm-ni: Remove spurious NULL in attribute_group definition
driver core: Constify bin_attribute definitions
sysfs: attribute_group: allow registration of const bin_attribute
firmware_loader: Fix possible resource leak in fw_log_firmware_info()
drivers: core: fw_devlink: Fix excess parameter description in docstring
driver core: class: Correct WARN() message in APIs class_(for_each|find)_device()
cacheinfo: Use of_property_present() for non-boolean properties
cdx: Fix cdx_mmap_resource() after constifying attr in ->mmap()
drivers: core: fw_devlink: Make the error message a bit more useful
phy: tegra: xusb: Set fwnode for xusb port devices
drm: display: Set fwnode for aux bus devices
driver core: fw_devlink: Stop trying to optimize cycle detection logic
driver core: Constify attribute arguments of binary attributes
sysfs: bin_attribute: add const read/write callback variants
sysfs: implement all BIN_ATTR_* macros in terms of __BIN_ATTR()
sysfs: treewide: constify attribute callback of bin_attribute::llseek()
sysfs: treewide: constify attribute callback of bin_attribute::mmap()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Heiko Carstens:
- Add swap entry for hugetlbfs support
- Add PTE_MARKER support for hugetlbs mappings; this fixes a regression
(possible page fault loop) which was introduced when support for
UFFDIO_POISON for hugetlbfs was added
- Add ARCH_HAS_PREEMPT_LAZY and PREEMPT_DYNAMIC support
- Mark IRQ entries in entry code, so that stack tracers can filter out
the non-IRQ parts of stack traces. This fixes stack depot capacity
limit warnings, since without filtering the number of unique stack
traces is huge
- In PCI code fix leak of struct zpci_dev object, and fix potential
double remove of hotplug slot
- Fix pagefault_disable() / pagefault_enable() unbalance in
arch_stack_user_walk_common()
- A couple of inline assembly optimizations, more cmpxchg() to
try_cmpxchg() conversions, and removal of usages of xchg() and
cmpxchg() on one and two byte memory areas
- Various other small improvements and cleanups
* tag 's390-6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (27 commits)
Revert "s390/mm: Allow large pages for KASAN shadow mapping"
s390/spinlock: Use flag output constraint for arch_cmpxchg_niai8()
s390/spinlock: Use R constraint for arch_load_niai4()
s390/spinlock: Generate shorter code for arch_spin_unlock()
s390/spinlock: Remove condition code clobber from arch_spin_unlock()
s390/spinlock: Use symbolic names in inline assemblies
s390: Support PREEMPT_DYNAMIC
s390/pci: Fix potential double remove of hotplug slot
s390/pci: Fix leak of struct zpci_dev when zpci_add_device() fails
s390/mm/hugetlbfs: Add missing includes
s390/mm: Add PTE_MARKER support for hugetlbfs mappings
s390/mm: Introduce region-third and segment table swap entries
s390/mm: Introduce region-third and segment table entry present bits
s390/mm: Rearrange region-third and segment table entry SW bits
KVM: s390: Increase size of union sca_utility to four bytes
KVM: s390: Remove one byte cmpxchg() usage
KVM: s390: Use try_cmpxchg() instead of cmpxchg() loops
s390/ap: Replace xchg() with WRITE_ONCE()
s390/mm: Allow large pages for KASAN shadow mapping
s390: Add ARCH_HAS_PREEMPT_LAZY support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
- fix for loongson64 device tree
- add SPI nand to realtek device tree
- change clock tree for mobileye
* tag 'mips_6.13_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Loongson64: DTS: Really fix PCIe port nodes for ls7a
mips: dts: realtek: Add SPI NAND controller
MIPS: mobileye: eyeq6h: add OLB nodes OLB and remove fixed clocks
MIPS: mobileye: eyeq5: use OLB as provider for fixed factor clocks
|
|
Pull ARM updates from Russell King:
- add dev_is_amba() function to allow conversions during the next cycle
- improve PREEMPT_RT performance with VFP
- KASAN fixes for vmap stack
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9431/1: mm: Pair atomic_set_release() with _read_acquire()
ARM: 9430/1: entry: Do a dummy read from VMAP shadow
ARM: 9429/1: ioremap: Sync PGDs for VMALLOC shadow
ARM: 9426/1: vfp: Move sending signals outside of vfp_state_hold()ed section.
ARM: 9425/1: vfp: Use vfp_state_hold() in vfp_support_entry().
ARM: 9424/1: vfp: Use vfp_state_hold() in vfp_sync_hwstate().
ARM: 9423/1: vfp: Provide vfp_state_hold() for VFP locking.
ARM: 9415/1: amba: Add dev_is_amba() function and export it for modules
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc
Pull sparc updates from Andreas Larsson:
- Make sparc64 compilable with clang
- Replace one-element array with flexible array member
* tag 'sparc-for-6.13-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc:
sparc/vdso: Add helper function for 64-bit right shift on 32-bit target
sparc: Replace one-element array with flexible array member
sparc/build: Add SPARC target flags for compiling with clang
sparc/build: Put usage of -fcall-used* flags behind cc-option
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Madhavan Srinivasan:
- Fix htmldocs errors in sysfs-bus-event_source-devices-vpa-pmu
- Fix warning due to missing #size-cells on powermac
Thanks to Michael Ellerman, Yang Li, Rob Herring, and Stephen Rothwell.
* tag 'powerpc-6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/prom_init: Fixup missing powermac #size-cells
docs: ABI: sysfs-bus-event_source-devices-vpa-pmu: Fix htmldocs errors
powerpc/machdep: Remove duplicated include in svm.c
|
|
This reverts commit ff123eb7741638d55abf82fac090bb3a543c1e74.
Allowing large pages for KASAN shadow mappings isn't inherently wrong,
but adding POPULATE_KASAN_MAP_SHADOW to large_allowed() exposes an issue
in can_large_pud() and can_large_pmd().
Since commit d8073dc6bc04 ("s390/mm: Allow large pages only for aligned
physical addresses"), both can_large_pud() and can_large_pmd() call _pa()
to check if large page physical addresses are aligned. However, _pa()
has a side effect: it allocates memory in POPULATE_KASAN_MAP_SHADOW
mode. This results in massive memory leaks.
The proper fix would be to address both large_allowed() and _pa()'s side
effects, but for now, revert this change to avoid the leaks.
Fixes: ff123eb77416 ("s390/mm: Allow large pages for KASAN shadow mapping")
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Add a new variant of arch_cmpxchg_niai8() which makes use of the flag
output constraint, which allows the compiler to generate slightly better
code. Also rename arch_cmpxchg_niai8() to arch_try_cmpxchg_niai8() which
reflects the purpose of the function and makes it consistent with other
"try" variants.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The load instruction used within arch_load_niai4() has a short displacement
and index register. Therefore use the R constraint to reflect this.
The used Q constraint does consider an index register.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Use mvhhi instead of sth to write a zero to spinlocks. Compared to the
sth variant this avoids the load of zero to a register, and reduces
register pressure.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Both instructions in arch_spin_unlock() do not clobber the condition
code. Therefore remove the condition code clobber from the inline assembly.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Improve readability and use symbolic names.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Select HAVE_PREEMPT_DYNAMIC_KEY and add the pieces which are required to
support PREEMPT_DYNAMIC.
See commit 99cf983cc8bc ("sched/preempt: Add PREEMPT_DYNAMIC using static
keys") and commit 1b2d3451ee50 ("arm64: Support PREEMPT_DYNAMIC") for more
details.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
In commit 6ee600bfbe0f ("s390/pci: remove hotplug slot when releasing the
device") the zpci_exit_slot() was moved from zpci_device_reserved() to
zpci_release_device() with the intention of keeping the hotplug slot
around until the device is actually removed.
Now zpci_release_device() is only called once all references are
dropped. Since the zPCI subsystem only drops its reference once the
device is in the reserved state it follows that zpci_release_device()
must only deal with devices in the reserved state. Despite that it
contains code to tear down from both configured and standby state. For
the standby case this already includes the removal of the hotplug slot
so would cause a double removal if a device was ever removed in
either configured or standby state.
Instead of causing a potential double removal in a case that should
never happen explicitly WARN_ON() if a device in non-reserved state is
released and get rid of the dead code cases.
Fixes: 6ee600bfbe0f ("s390/pci: remove hotplug slot when releasing the device")
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Tested-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Prior to commit 0467cdde8c43 ("s390/pci: Sort PCI functions prior to
creating virtual busses") the IOMMU was initialized and the device was
registered as part of zpci_create_device() with the struct zpci_dev
freed if either resulted in an error. With that commit this was moved
into a separate function called zpci_add_device().
While this new function logs when adding failed, it expects the caller
not to use and to free the struct zpci_dev on error. This difference
between it and zpci_create_device() was missed while changing the
callers and the incompletely initialized struct zpci_dev may get used in
zpci_scan_configured_device in the error path. This then leads to
a crash due to the device not being registered with the zbus. It was
also not freed in this case. Fix this by handling the error return of
zpci_add_device(). Since in this case the zdev was not added to the
zpci_list it can simply be discarded and freed. Also make this more
explicit by moving the kref_init() into zpci_add_device() and document
that zpci_zdev_get()/zpci_zdev_put() must be used after adding.
Cc: stable@vger.kernel.org
Fixes: 0467cdde8c43 ("s390/pci: Sort PCI functions prior to creating virtual busses")
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Add missing includes to fix this randconfig compile error:
All errors (new ones prefixed by >>):
In file included from mm/pagewalk.c:5:
In file included from include/linux/hugetlb.h:798:
>> arch/s390/include/asm/hugetlb.h:94:31: error: call to undeclared function 'is_pte_marker'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
94 | return huge_pte_none(pte) || is_pte_marker(pte);
| ^
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202411281002.IPkRpIcR-lkp@intel.com/
Fixes: 487ef5d4d912 ("s390/mm: Add PTE_MARKER support for hugetlbfs mappings")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New hardware support:
- Qualcomm SAR2130P GPI dma support
- Sifive PIC64GX pdma support
- Rcar r7s72100 support and associated updates
Updates:
- STM32 DMA3 updates for packing/unpacking mode and prevention of
additional xfers
- Simplification of devm_acpi_dma_controller_register() and associate
cleanup including headers
- loongson prefix renames
- Switch back to platform_driver::remove() subsystem update"
* tag 'dmaengine-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: loongson2-apb: Rename the prefix ls2x to loongson2
dt-bindings: dma: sifive pdma: Add PIC64GX to compatibles
dmaengine: fix typo in the comment
dmaengine: stm32-dma3: clamp AXI burst using match data
dmaengine: stm32-dma3: prevent LL refactoring thanks to DT configuration
dt-bindings: dma: stm32-dma3: prevent additional transfers
dmaengine: stm32-dma3: refactor HW linked-list to optimize memory accesses
dmaengine: stm32-dma3: prevent pack/unpack thanks to DT configuration
dt-bindings: dma: stm32-dma3: prevent packing/unpacking mode
dmaengine: idxd: Move DSA/IAA device IDs to IDXD driver
dt-bindings: dma: qcom,gpi: Add SAR2130P compatible
dmaengine: Switch back to struct platform_driver::remove()
dmaengine: ep93xx: Fix unsigned compared against 0
dmaengine: acpi: Clean up headers
dmaengine: acpi: Simplify devm_acpi_dma_controller_register()
dmaengine: acpi: Drop unused devm_acpi_dma_controller_free()
dmaengine: sh: rz-dmac: add r7s72100 support
dt-bindings: dma: rz-dmac: Document RZ/A1H SoC
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-v updates from Palmer Dabbelt:
- Support for pointer masking in userspace
- Support for probing vector misaligned access performance
- Support for qspinlock on systems with Zacas and Zabha
* tag 'riscv-for-linus-6.13-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (38 commits)
RISC-V: Remove unnecessary include from compat.h
riscv: Fix default misaligned access trap
riscv: Add qspinlock support
dt-bindings: riscv: Add Ziccrse ISA extension description
riscv: Add ISA extension parsing for Ziccrse
asm-generic: ticket-lock: Add separate ticket-lock.h
asm-generic: ticket-lock: Reuse arch_spinlock_t of qspinlock
riscv: Implement xchg8/16() using Zabha
riscv: Implement arch_cmpxchg128() using Zacas
riscv: Improve zacas fully-ordered cmpxchg()
riscv: Implement cmpxchg8/16() using Zabha
dt-bindings: riscv: Add Zabha ISA extension description
riscv: Implement cmpxchg32/64() using Zacas
riscv: Do not fail to build on byte/halfword operations with Zawrs
riscv: Move cpufeature.h macros into their own header
KVM: riscv: selftests: Add Smnpm and Ssnpm to get-reg-list test
RISC-V: KVM: Allow Smnpm and Ssnpm extensions for guests
riscv: hwprobe: Export the Supm ISA extension
riscv: selftests: Add a pointer masking test
riscv: Allow ptrace control of the tagged address ABI
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Fix build failure with GCC 15 due to default -std=gnu23
- Add PREEMPT_RT/PREEMPT_LAZY support
- Add I2S in DTS for Loongson-2K1000/Loongson-2K2000
- Some bug fixes and other small changes
* tag 'loongarch-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Update Loongson-3 default config file
LoongArch: dts: Add I2S support to Loongson-2K2000
LoongArch: dts: Add I2S support to Loongson-2K1000
LoongArch: Allow to enable PREEMPT_LAZY
LoongArch: Allow to enable PREEMPT_RT
LoongArch: Select HAVE_POSIX_CPU_TIMERS_TASK_WORK
LoongArch: Fix sleeping in atomic context for PREEMPT_RT
LoongArch: Reduce min_delta for the arch clockevent device
LoongArch: BPF: Sign-extend return values
LoongArch: Fix build failure with GCC 15 (-std=gnu23)
LoongArch: Explicitly specify code model in Makefile
|
|
Commit 8a13897fb0daa ("mm: userfaultfd: support UFFDIO_POISON for
hugetlbfs") added support for PTE_MARKER_POISONED for hugetlbfs, but
PTE_MARKER also needs support for swap entries. For s390, swap entries
were only supported on PTE level, not on the PMD/PUD levels that are used
for large hugetlbfs mappings.
Therefore, when writing a PTE_MARKER_POISONED entry, the resulting entry
on PMD/PUD level would be an invalid / empty entry. Further access would
then generate a pagefault loop, instead of the expected SIGBUS. It is a
loop inside the kernel, but interruptible and uffd fault handling also
calls schedule() in between, so at least it won't completely block the
system.
Previous commits prepared support for swap entries on PMD/PUD levels.
PTE_MARKER support for hugetlbfs can now be enabled by simply adding an
extra is_pte_marker() check to huge_pte_none_mostly(). Fault handling
code also needs to be adjusted to expect the VM_FAULT_HWPOISON_LARGE
fault flag, which was not possible on s390 before.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Introduce region-third (PUD) and segment table (PMD) swap entries, and
make hugetlbfs RSTE <-> PTE conversion code aware of them, so that they
can be used for hugetlbfs PTE_MARKER entries. Future work could also
build on this to enable THP_SWAP and THP_MIGRATION for s390.
Similar to PTE swap entries, bits 0-51 can be used to store the swap
offset, but bits 57-61 cannot be used for swap type because that overlaps
with the INVALID and TABLE TYPE bits. PMD/PUD swap entries must be invalid,
and have a correct table type so that pud_folded() check still works.
Bits 53-57 can be used for swap type, but those include the PROTECT bit.
So unlike swap PTEs, the PROTECT bit cannot be used to mark the swap entry.
Use the "Common-Segment/Region" bit 59 instead for that.
Also remove the !MACHINE_HAS_NX check in __set_huge_pte_at(). Otherwise,
that would clear the _SEGMENT_ENTRY_NOEXEC bit also for swap entries, where
it is used for encoding the swap type. The architecture only requires this
bit to be 0 for PTEs, with !MACHINE_HAS_NX, not for segment or region-third
entries. And the check is also redundant, because after __pte_to_rste()
conversion, for non-swap PTEs it would only be set if it was already set in
the PTE, which should never be the case for !MACHINE_HAS_NX.
This is a prerequisite for hugetlbfs PTE_MARKER support on s390, which
is needed to fix a regression introduced with commit 8a13897fb0da
("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs"). That commit
depends on the availability of swap entries for hugetlbfs, which were
not available for s390 so far.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Introduce region-third and segment table entry present SW bits, and adjust
pmd/pud_present() accordingly.
Also add pmd/pud_present() checks to pmd/pud_leaf(), to return false for
future swap entries. Same logic applies to pmd_trans_huge(), make that
return pmd_leaf() instead of duplicating the same check.
huge_pte_offset() also needs to be adjusted, current code would return
NULL for !pud_present(). Use the same logic as in the generic version,
which allows for !pud_present() swap entries.
Similar to PTE, bit 63 can be used for the new SW present bit in region
and segment table entries. For segment-table entries (PMD) the architecture
says that "Bits 62-63 are available for programming", so they are safe to
use. The same is true for large leaf region-third-table entries (PUD).
However, for non-leaf region-third-table entries, bits 62-63 indicate the
TABLE LENGTH and both must be set to 1. But such entries would always be
considered as present, so it is safe to use bit 63 as PRESENT bit for PUD.
They also should not conflict with bit 62 potentially later used for
preserving SOFT_DIRTY in swap entries, because they are not swap entries.
Valid PMDs / PUDs should always have the present bit set, so add it to
the various pgprot defines, and also _SEGMENT_ENTRY which is OR'ed e.g.
in pmd_populate(). _REGION3_ENTRY wouldn't need any change, as the present
bit is already included in the TABLE LENGTH, but also explicitly add it
there, for completeness, and just in case the bit would ever be changed.
gmap code needs some adjustment, to also OR the _SEGMENT_ENTRY, like it
is already done gmap_shadow_pgt() when creating new PMDs, but not in
__gmap_link(). Otherwise, the gmap PMDs would not be considered present,
e.g. when using pmd_leaf() checks in gmap code. The various WARN_ON
checks in gmap code also need adjustment, to tolerate the new present
bit.
This is a prerequisite for hugetlbfs PTE_MARKER support on s390, which
is needed to fix a regression introduced with commit 8a13897fb0da
("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs"). That commit
depends on the availability of swap entries for hugetlbfs, which were
not available for s390 so far.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Rearrange region-third and segment table entry SW bits, in order to
make room for future encoding of region/segment table swap entries.
Also adjust _SEGMENT_ENTRY_GMAP_UC and _SEGMENT_ENTRY_GMAP_IN bits in
gmap code. Those should only apply for gmap PMDs, and not really depend
on or conflict with host PMD bits, but for consistency also adjust them:
- _SEGMENT_ENTRY_GMAP_UC "dirty (migration)" was using the same bit as
_SEGMENT_ENTRY_SOFT_DIRTY in the host PMD -> make it use the new
SOFT_DIRTY bit 63 (0x0002)
- _SEGMENT_ENTRY_GMAP_IN "invalidation notify bit" was using 0x8000,
which was an unused bit in the host PMD, that is now used for
_SEGMENT_ENTRY_WRITE -> make it use bit 52 (0x0800) instead, which is
still unused in the host PMD
This is a prerequisite for hugetlbfs PTE_MARKER support on s390, which
is needed to fix a regression introduced with commit 8a13897fb0da
("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs"). That commit
depends on the availability of swap entries for hugetlbfs, which were
not available for s390 so far.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
kvm_s390_update_topology_change_report() modifies a single bit within
sca_utility using cmpxchg(). Given that the size of the sca_utility union
is two bytes this generates very inefficient code. Change the size to four
bytes, so better code can be generated.
Even though the size of sca_utility doesn't reflect architecture anymore
this seems to be the easiest and most pragmatic approach to avoid
inefficient code.
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20241126102515.3178914-4-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Within sca_clear_ext_call() cmpxchg() is used to clear one or two bytes
(depending on sca format). The cmpxchg() calls are not supposed to fail; if
so that would be a bug. Given that cmpxchg() usage on one and two byte
areas generates very inefficient code, replace them with block concurrent
WRITE_ONCE() calls, and remove the WARN_ON().
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20241126102515.3178914-3-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Convert all cmpxchg() loops to try_cmpxchg() loops. With gcc 14 and the
usage of flag output operands in try_cmpxchg() this allows the compiler to
generate slightly better code.
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20241126102515.3178914-2-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
On some powermacs `escc` nodes are missing `#size-cells` properties,
which is deprecated and now triggers a warning at boot since commit
045b14ca5c36 ("of: WARN on deprecated #address-cells/#size-cells
handling").
For example:
Missing '#size-cells' in /pci@f2000000/mac-io@c/escc@13000
WARNING: CPU: 0 PID: 0 at drivers/of/base.c:133 of_bus_n_size_cells+0x98/0x108
Hardware name: PowerMac3,1 7400 0xc0209 PowerMac
...
Call Trace:
of_bus_n_size_cells+0x98/0x108 (unreliable)
of_bus_default_count_cells+0x40/0x60
__of_get_address+0xc8/0x21c
__of_address_to_resource+0x5c/0x228
pmz_init_port+0x5c/0x2ec
pmz_probe.isra.0+0x144/0x1e4
pmz_console_init+0x10/0x48
console_init+0xcc/0x138
start_kernel+0x5c4/0x694
As powermacs boot via prom_init it's possible to add the missing
properties to the device tree during boot, avoiding the warning. Note
that `escc-legacy` nodes are also missing `#size-cells` properties, but
they are skipped by the macio driver, so leave them alone.
Depends-on: 045b14ca5c36 ("of: WARN on deprecated #address-cells/#size-cells handling")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241126025710.591683-1-mpe@ellerman.id.au
|
|
The header files linux/mem_encrypt.h is included twice in svm.c,
so one inclusion of each can be removed.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=11750
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241107010259.46308-1-yang.lee@linux.alibaba.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Make pci_stop_dev() and pci_destroy_dev() safe so concurrent
callers can't stop a device multiple times, even as we migrate from
the global pci_rescan_remove_lock to finer-grained locking (Keith
Busch)
- Improve pci_walk_bus() implementation by making it recursive and
moving locking up to avoid need for a 'locked' parameter (Keith
Busch)
- Unexport pci_walk_bus_locked(), which is only used internally by
the PCI core (Keith Busch)
- Detect some Thunderbolt chips that are built-in and hence
'trustworthy' by a heuristic since the 'ExternalFacingPort' and
'usb4-host-interface' ACPI properties are not quite enough (Esther
Shimanovich)
Resource management:
- Use PCI bus addresses (not CPU addresses) in 'ranges' properties
when building dynamic DT nodes so systems where PCI and CPU
addresses differ work correctly (Andrea della Porta)
- Tidy resource sizing and assignment with helpers to reduce
redundancy (Ilpo Järvinen)
- Improve pdev_sort_resources() 'bogus alignment' warning to be more
specific (Ilpo Järvinen)
Driver binding:
- Convert driver .remove_new() callbacks to .remove() again to finish
the conversion from returning 'int' to being 'void' (Sergio
Paracuellos)
- Export pcim_request_all_regions(), a managed interface to request
all BARs (Philipp Stanner)
- Replace pcim_iomap_regions_request_all() with
pcim_request_all_regions(), and pcim_iomap_table()[n] with
pcim_iomap(n), in the following drivers: ahci, crypto qat, crypto
octeontx2, intel_th, iwlwifi, ntb idt, serial rp2, ALSA korg1212
(Philipp Stanner)
- Remove the now unused pcim_iomap_regions_request_all() (Philipp
Stanner)
- Export pcim_iounmap_region(), a managed interface to unmap and
release a PCI BAR (Philipp Stanner)
- Replace pcim_iomap_regions(mask) with pcim_iomap_region(n), and
pcim_iounmap_regions(mask) with pcim_iounmap_region(n), in the
following drivers: fpga dfl-pci, block mtip32xx, gpio-merrifield,
cavium (Philipp Stanner)
Error handling:
- Add sysfs 'reset_subordinate' to reset the entire hierarchy below a
bridge; previously Secondary Bus Reset could only be used when
there was a single device below a bridge (Keith Busch)
- Warn if we reset a running device where the driver didn't register
pci_error_handlers notification callbacks (Keith Busch)
ASPM:
- Disable ASPM L1 before touching L1 PM Substates to follow the spec
closer and avoid a CPU load timeout on some platforms (Ajay
Agarwal)
- Set devices below Intel VMD to D0 before enabling ASPM L1 Substates
as required per spec for all L1 Substates changes (Jian-Hong Pan)
Power management:
- Enable starfive controller runtime PM before probing host bridge
(Mayank Rana)
- Enable runtime power management for host bridges (Krishna chaitanya
chundru)
Power control:
- Use of_platform_device_create() instead of of_platform_populate()
to create pwrctl platform devices so we can control it based on the
child nodes (Manivannan Sadhasivam)
- Create pwrctrl platform devices only if there's a relevant power
supply property (Manivannan Sadhasivam)
- Add device link from the pwrctl supplier to the PCI dev to ensure
pwrctl drivers are probed before the PCI dev driver; this avoids a
race where pwrctl could change device power state while the PCI
driver was active (Manivannan Sadhasivam)
- Find pwrctl device for removal with of_find_device_by_node()
instead of searching all children of the parent (Manivannan
Sadhasivam)
- Rename 'pwrctl' to 'pwrctrl' to match new bandwidth controller
('bwctrl') and hotplug files (Bjorn Helgaas)
Bandwidth control:
- Add read/modify/write locking for Link Control 2, which is used to
manage Link speed (Ilpo Järvinen)
- Extract Link Bandwidth Management Status check into
pcie_lbms_seen(), where it can be shared between the bandwidth
controller and quirks that use it to help retrain failed links
(Ilpo Järvinen)
- Re-add Link Bandwidth notification support with updates to address
the reasons it was previously reverted (Alexandru Gagniuc, Ilpo
Järvinen)
- Add pcie_set_target_speed() and related functionality so drivers
can manage PCIe Link speed based on thermal or other constraints
(Ilpo Järvinen)
- Add a thermal cooling driver to throttle PCIe Links via the
existing thermal management framework (Ilpo Järvinen)
- Add a userspace selftest for the PCIe bandwidth controller (Ilpo
Järvinen)
PCI device hotplug:
- Add hotplug controller driver for Marvell OCTEON multi-function
device where function 0 has a management console interface to
enable/disable and provision various personalities for the other
functions (Shijith Thotton)
- Retain a reference to the pci_bus for the lifetime of a pci_slot to
avoid a use-after-free when the thunderbolt driver resets USB4 host
routers on boot, causing hotplug remove/add of downstream docks or
other devices (Lukas Wunner)
- Remove unused cpcihp struct cpci_hp_controller_ops.hardware_test
(Guilherme Giacomo Simoes)
- Remove unused cpqphp struct ctrl_dbg.ctrl (Christophe JAILLET)
- Use pci_bus_read_dev_vendor_id() instead of hand-coded presence
detection in cpqphp (Ilpo Järvinen)
- Simplify cpqphp enumeration, which is already simple-minded and
doesn't handle devices below hot-added bridges (Ilpo Järvinen)
Virtualization:
- Add ACS quirk for Wangxun FF5xxx NICs, which don't advertise an ACS
capability but do isolate functions as though PCI_ACS_RR and
PCI_ACS_CR were set, so the functions can be in independent IOMMU
groups (Mengyuan Lou)
TLP Processing Hints (TPH):
- Add and document TLP Processing Hints (TPH) support so drivers can
enable and disable TPH and the kernel can save/restore TPH
configuration (Wei Huang)
- Add TPH Steering Tag support so drivers can retrieve Steering Tag
values associated with specific CPUs via an ACPI _DSM to improve
performance by directing DMA writes closer to their consumers (Wei
Huang)
Data Object Exchange (DOE):
- Wait up to 1 second for DOE Busy bit to clear before writing a
request to the mailbox to avoid failures if the mailbox is still
busy from a previous transfer (Gregory Price)
Endpoint framework:
- Skip attempts to allocate from endpoint controller memory window if
the requested size is larger than the window (Damien Le Moal)
- Add and document pci_epc_mem_map() and pci_epc_mem_unmap() to
handle controller-specific size and alignment constraints, and add
test cases to the endpoint test driver (Damien Le Moal)
- Implement dwc pci_epc_ops.align_addr() so pci_epc_mem_map() can
observe DWC-specific alignment requirements (Damien Le Moal)
- Synchronously cancel command handler work in endpoint test before
cleaning up DMA and BARs (Damien Le Moal)
- Respect endpoint page size in dw_pcie_ep_align_addr() (Niklas
Cassel)
- Use dw_pcie_ep_align_addr() in dw_pcie_ep_raise_msi_irq() and
dw_pcie_ep_raise_msix_irq() instead of open coding the equivalent
(Niklas Cassel)
- Avoid NULL dereference if Modem Host Interface Endpoint lacks
'mmio' DT property (Zhongqiu Han)
- Release PCI domain ID of Endpoint controller parent (not controller
itself) and before unregistering the controller, to avoid
use-after-free (Zijun Hu)
- Clear secondary (not primary) EPC in pci_epc_remove_epf() when
removing the secondary controller associated with an NTB (Zijun Hu)
Cadence PCIe controller driver:
- Lower severity of 'phy-names' message (Bartosz Wawrzyniak)
Freescale i.MX6 PCIe controller driver:
- Fix suspend/resume support on i.MX6QDL, which has a hardware
erratum that prevents use of L2 (Stefan Eichenberger)
Intel VMD host bridge driver:
- Add 0xb60b and 0xb06f Device IDs for client SKUs (Nirmal Patel)
MediaTek PCIe Gen3 controller driver:
- Update mediatek-gen3 DT binding to require the exact number of
clocks for each SoC (Fei Shao)
- Add support for DT 'max-link-speed' and 'num-lanes' properties to
restrict the link speed and width (AngeloGioacchino Del Regno)
Microchip PolarFlare PCIe controller driver:
- Add DT and driver support for using either of the two PolarFire
Root Ports (Conor Dooley)
NVIDIA Tegra194 PCIe controller driver:
- Move endpoint controller cleanups that depend on refclk from the
host to the notifier that tells us the host has deasserted PERST#,
when refclk should be valid (Manivannan Sadhasivam)
Qualcomm PCIe controller driver:
- Add qcom SAR2130P DT binding with an additional clock (Dmitry
Baryshkov)
- Enable MSI interrupts if 'global' IRQ is supported, since a
previous commit unintentionally masked them (Manivannan Sadhasivam)
- Move endpoint controller cleanups that depend on refclk from the
host to the notifier that tells us the host has deasserted PERST#,
when refclk should be valid (Manivannan Sadhasivam)
- Add DT binding and driver support for IPQ9574, with Synopsys IP
v5.80a and Qcom IP 1.27.0 (devi priya)
- Move the OPP "operating-points-v2" table from the
qcom,pcie-sm8450.yaml DT binding to qcom,pcie-common.yaml, where it
can be used by other Qcom platforms (Qiang Yu)
- Add 'global' SPI interrupt for events like link-up, link-down to
qcom,pcie-x1e80100 DT binding so we can start enumeration when the
link comes up (Qiang Yu)
- Disable ASPM L0s for qcom,pcie-x1e80100 since the PHY is not tuned
to support this (Qiang Yu)
- Add ops_1_21_0 for SC8280X family SoC, which doesn't use the
'iommu-map' DT property and doesn't need BDF-to-SID translation
(Qiang Yu)
Rockchip PCIe controller driver:
- Define ROCKCHIP_PCIE_AT_SIZE_ALIGN to replace magic 256 endpoint
.align value (Damien Le Moal)
- When unmapping an endpoint window, compute the region index instead
of searching for it, and verify that the address was mapped (Damien
Le Moal)
- When mapping an endpoint window, verify that the address hasn't
been mapped already (Damien Le Moal)
- Implement pci_epc_ops.align_addr() for rockchip-ep (Damien Le Moal)
- Fix MSI IRQ data mapping to observe the alignment constraint, which
fixes intermittent page faults in memcpy_toio() and memcpy_fromio()
(Damien Le Moal)
- Rename rockchip_pcie_parse_ep_dt() to
rockchip_pcie_ep_get_resources() for consistency with similar DT
interfaces (Damien Le Moal)
- Skip the unnecessary link train in rockchip_pcie_ep_probe() and do
it only in the endpoint start operation (Damien Le Moal)
- Implement pci_epc_ops.stop_link() to disable link training and
controller configuration (Damien Le Moal)
- Attempt link training at 5 GT/s when both partners support it
(Damien Le Moal)
- Add a handler for PERST# signal so we can detect host-initiated
resets and start link training after PERST# is deasserted (Damien
Le Moal)
Synopsys DesignWare PCIe controller driver:
- Clear outbound address on unmap so dw_pcie_find_index() won't match
an ATU index that was already unmapped (Damien Le Moal)
- Use of_property_present() instead of of_property_read_bool() when
testing for presence of non-boolean DT properties (Rob Herring)
- Advertise 1MB size if endpoint supports Resizable BARs, which was
inadvertently lost in v6.11 (Niklas Cassel)
TI J721E PCIe driver:
- Add PCIe support for J722S SoC (Siddharth Vadapalli)
- Delay PCIE_T_PVPERL_MS (100 ms), not just PCIE_T_PERST_CLK_US (100
us), before deasserting PERST# to ensure power and refclk are
stable (Siddharth Vadapalli)
TI Keystone PCIe controller driver:
- Set the 'ti,keystone-pcie' mode so v3.65a devices work in Root
Complex mode (Kishon Vijay Abraham I)
- Try to avoid unrecoverable SError for attempts to issue config
transactions when the link is down; this is racy but the best we
can do (Kishon Vijay Abraham I)
Miscellaneous:
- Reorganize kerneldoc parameter names to match order in function
signature (Julia Lawall)
- Fix sysfs reset_method_store() memory leak (Todd Kjos)
- Simplify pci_create_slot() (Ilpo Järvinen)
- Fix incorrect printf format specifiers in pcitest (Luo Yifan)"
* tag 'pci-v6.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (127 commits)
PCI: rockchip-ep: Handle PERST# signal in EP mode
PCI: rockchip-ep: Improve link training
PCI: rockship-ep: Implement the pci_epc_ops::stop_link() operation
PCI: rockchip-ep: Refactor endpoint link training enable
PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() MSI-X hiding
PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() memory allocations
PCI: rockchip-ep: Rename rockchip_pcie_parse_ep_dt()
PCI: rockchip-ep: Fix MSI IRQ data mapping
PCI: rockchip-ep: Implement the pci_epc_ops::align_addr() operation
PCI: rockchip-ep: Improve rockchip_pcie_ep_map_addr()
PCI: rockchip-ep: Improve rockchip_pcie_ep_unmap_addr()
PCI: rockchip-ep: Use a macro to define EP controller .align feature
PCI: rockchip-ep: Fix address translation unit programming
PCI/pwrctrl: Rename pwrctrl functions and structures
PCI/pwrctrl: Rename pwrctl files to pwrctrl
PCI/pwrctl: Remove pwrctl device without iterating over all children of pwrctl parent
PCI/pwrctl: Ensure that pwrctl drivers are probed before PCI client drivers
PCI/pwrctl: Create pwrctl device only if at least one power supply is present
PCI/pwrctl: Use of_platform_device_create() to create pwrctl devices
tools: PCI: Fix incorrect printf format specifiers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture update from Helge Deller:
- Fix function graph tracing disablement on parisc
* tag 'parisc-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc/ftrace: Fix function graph tracing disablement
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu updates from Greg Ungerer:
- only include FEC platform entries when hardware supports it
- fix typo in ifdef config name
* tag 'm68knommu-for-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: coldfire/device.c: only build FEC when HW macros are defined
m68k: mcfgpio: Fix incorrect register offset for CONFIG_M5441x
|
|
Without this I get a bunch of build errors like
In file included from ./include/linux/sched/task_stack.h:12,
from ./arch/riscv/include/asm/compat.h:12,
from ./arch/riscv/include/asm/pgtable.h:115,
from ./include/linux/pgtable.h:6,
from ./include/linux/mm.h:30,
from arch/riscv/kernel/asm-offsets.c:8:
./include/linux/kasan.h:50:37: error: ‘MAX_PTRS_PER_PTE’ undeclared here (not in a function); did you mean ‘PTRS_PER_PTE’?
50 | extern pte_t kasan_early_shadow_pte[MAX_PTRS_PER_PTE + PTE_HWTABLE_PTRS];
| ^~~~~~~~~~~~~~~~
| PTRS_PER_PTE
./include/linux/kasan.h:51:8: error: unknown type name ‘pmd_t’; did you mean ‘pgd_t’?
51 | extern pmd_t kasan_early_shadow_pmd[MAX_PTRS_PER_PMD];
| ^~~~~
| pgd_t
./include/linux/kasan.h:51:37: error: ‘MAX_PTRS_PER_PMD’ undeclared here (not in a function); did you mean ‘PTRS_PER_PGD’?
51 | extern pmd_t kasan_early_shadow_pmd[MAX_PTRS_PER_PMD];
| ^~~~~~~~~~~~~~~~
| PTRS_PER_PGD
./include/linux/kasan.h:52:8: error: unknown type name ‘pud_t’; did you mean ‘pgd_t’?
52 | extern pud_t kasan_early_shadow_pud[MAX_PTRS_PER_PUD];
| ^~~~~
| pgd_t
./include/linux/kasan.h:52:37: error: ‘MAX_PTRS_PER_PUD’ undeclared here (not in a function); did you mean ‘PTRS_PER_PGD’?
52 | extern pud_t kasan_early_shadow_pud[MAX_PTRS_PER_PUD];
| ^~~~~~~~~~~~~~~~
| PTRS_PER_PGD
./include/linux/kasan.h:53:8: error: unknown type name ‘p4d_t’; did you mean ‘pgd_t’?
53 | extern p4d_t kasan_early_shadow_p4d[MAX_PTRS_PER_P4D];
| ^~~~~
| pgd_t
./include/linux/kasan.h:53:37: error: ‘MAX_PTRS_PER_P4D’ undeclared here (not in a function); did you mean ‘PTRS_PER_PGD’?
53 | extern p4d_t kasan_early_shadow_p4d[MAX_PTRS_PER_P4D];
| ^~~~~~~~~~~~~~~~
| PTRS_PER_PGD
Link: https://lore.kernel.org/r/20241126143250.29708-1-palmer@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
1, Enable ACPI_BGRT.
2, Enable MODULE COMPRESS.
3, Enable common DM targets.
4, Enable FS_ENCRYPTION and FS_VERITY.
5, Enable CPUFreq governors and drivers.
6, Enable PVPANIC MMIO and PCI drivers.
7, Enable some HID input drivers.
8, Enable some ASoC codec drivers.
9, Enable some Realtek WiFi drivers.
10, Remove some obsolete config options.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The module is supported, adding it.
Not all Loongson-2K1000 boards have an i2s interface, here is an example
of enabling it:
sound {
compatible = "loongson,ls-audio-card";
model = "Loongson-ASoC";
mclk-fs = <512>;
cpu {
sound-dai = <&i2s>;
};
codec {
sound-dai = <&es8323>;
};
};
&i2c1 {
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
es8323:es8323@10 {
compatible = "everest,es8323";
reg = <0x10>;
#sound-dai-cells = <0>;
};
};
&i2s {
status = "okay";
clock-frequency = <175000000>;
#sound-dai-cells = <0>;
};
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The module is supported, adding it.
Not all Loongson-2K1000 boards have an i2s interface, here is an example
of enabling it:
sound {
compatible = "loongson,ls-audio-card";
model = "Loongson-ASoC";
mclk-fs = <512>;
cpu {
sound-dai = <&i2s>;
};
codec {
sound-dai = <&uda1342>;
};
};
&apbdma2 {
status = "okay";
};
&apbdma3 {
status = "okay";
};
&i2c3 {
status = "okay";
pinctrl-0 = <&i2c1_pins_default>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
uda1342: codec@1a {
compatible = "nxp,uda1342";
reg = <0x1a>;
#sound-dai-cells = <0>;
};
};
&i2s {
status = "okay";
pinctrl-0 = <&hda_pins_default>;
pinctrl-names = "default";
};
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
LoongArch has supported PREEMPT_RT now. It uses GENERIC_ENTRY, so just
add the TIF bit (TIF_NEED_RESCHED_LAZY) related definitions and select
the Kconfig symbol (ARCH_HAS_PREEMPT_LAZY) is enough to make it go.
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
It is really time.
LoongArch has all the required architecture related changes, that have
been identified over time, in order to enable PREEMPT_RT. With the recent
printk changes, the last known road block has been addressed.
Allow to enable PREEMPT_RT on LoongArch.
Below are the latency data from cyclictest on a 4-core Loongson-3A5000
machine, with a "make -j8" kernel building workload in the background.
1. PREEMPT kernel with default configuration:
./cyclictest -a -t -m -i200 -d0 -p99
policy: fifo: loadavg: 8.78 8.96 8.64 10/296 64800
T: 0 ( 4592) P:99 I:200 C:14838617 Min: 3 Act: 6 Avg: 8 Max: 844
T: 1 ( 4593) P:99 I:200 C:14838765 Min: 3 Act: 9 Avg: 8 Max: 909
T: 2 ( 4594) P:99 I:200 C:14838510 Min: 3 Act: 7 Avg: 8 Max: 832
T: 3 ( 4595) P:99 I:200 C:14838631 Min: 3 Act: 8 Avg: 8 Max: 931
2. PREEMPT_RT kernel with default configuration:
./cyclictest -a -t -m -i200 -d0 -p99
policy: fifo: loadavg: 10.38 10.47 10.35 9/336 77788
T: 0 ( 3941) P:99 I:200 C:19439626 Min: 3 Act: 12 Avg: 8 Max: 227
T: 1 ( 3942) P:99 I:200 C:19439624 Min: 2 Act: 11 Avg: 8 Max: 184
T: 2 ( 3943) P:99 I:200 C:19439623 Min: 3 Act: 4 Avg: 7 Max: 223
T: 3 ( 3944) P:99 I:200 C:19439623 Min: 2 Act: 10 Avg: 7 Max: 226
3. PREEMPT_RT kernel with tuned configuration:
./cyclictest -a -t -m -i200 -d0 -p99
policy: fifo: loadavg: 10.52 10.66 10.62 12/334 109397
T: 0 ( 4765) P:99 I:200 C:29335186 Min: 3 Act: 6 Avg: 8 Max: 62
T: 1 ( 4766) P:99 I:200 C:29335185 Min: 3 Act: 10 Avg: 8 Max: 52
T: 2 ( 4767) P:99 I:200 C:29335184 Min: 3 Act: 8 Avg: 8 Max: 64
T: 3 ( 4768) P:99 I:200 C:29335183 Min: 3 Act: 12 Avg: 8 Max: 53
Main instruments of tuned configuration include: Disable the boot rom
space in BIOS, in order to avoid kernel's speculative access to low-
speed memory (i.e. boot rom space); Disable CPUFreq scaling; Disable
RTC synchronization in the ntpd/chronyd service (also avoid other RTC
accesses when running low-latency workloads).
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Move POSIX CPU timer expiry and signal delivery into task context to
allow PREEMPT_RT setups to coexist with KVM.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Commit bab1c299f3945ffe79 ("LoongArch: Fix sleeping in atomic context in
setup_tlb_handler()") changes the gfp flag from GFP_KERNEL to GFP_ATOMIC
for alloc_pages_node(). However, for PREEMPT_RT kernels we can still get
a "sleeping in atomic context" error:
[ 0.372259] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
[ 0.372266] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1
[ 0.372268] preempt_count: 1, expected: 0
[ 0.372270] RCU nest depth: 1, expected: 1
[ 0.372272] 3 locks held by swapper/1/0:
[ 0.372274] #0: 900000000c9f5e60 (&pcp->lock){+.+.}-{3:3}, at: get_page_from_freelist+0x524/0x1c60
[ 0.372294] #1: 90000000087013b8 (rcu_read_lock){....}-{1:3}, at: rt_spin_trylock+0x50/0x140
[ 0.372305] #2: 900000047fffd388 (&zone->lock){+.+.}-{3:3}, at: __rmqueue_pcplist+0x30c/0xea0
[ 0.372314] irq event stamp: 0
[ 0.372316] hardirqs last enabled at (0): [<0000000000000000>] 0x0
[ 0.372322] hardirqs last disabled at (0): [<9000000005947320>] copy_process+0x9c0/0x26e0
[ 0.372329] softirqs last enabled at (0): [<9000000005947320>] copy_process+0x9c0/0x26e0
[ 0.372335] softirqs last disabled at (0): [<0000000000000000>] 0x0
[ 0.372341] CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Not tainted 6.12.0-rc7+ #1891
[ 0.372346] Hardware name: Loongson Loongson-3A5000-7A1000-1w-CRB/Loongson-LS3A5000-7A1000-1w-CRB, BIOS vUDK2018-LoongArch-V2.0.0-prebeta9 10/21/2022
[ 0.372349] Stack : 0000000000000089 9000000005a0db9c 90000000071519c8 9000000100388000
[ 0.372486] 900000010038b890 0000000000000000 900000010038b898 9000000007e53788
[ 0.372492] 900000000815bcc8 900000000815bcc0 900000010038b700 0000000000000001
[ 0.372498] 0000000000000001 4b031894b9d6b725 00000000055ec000 9000000100338fc0
[ 0.372503] 00000000000000c4 0000000000000001 000000000000002d 0000000000000003
[ 0.372509] 0000000000000030 0000000000000003 00000000055ec000 0000000000000003
[ 0.372515] 900000000806d000 9000000007e53788 00000000000000b0 0000000000000004
[ 0.372521] 0000000000000000 0000000000000000 900000000c9f5f10 0000000000000000
[ 0.372526] 90000000076f12d8 9000000007e53788 9000000005924778 0000000000000000
[ 0.372532] 00000000000000b0 0000000000000004 0000000000000000 0000000000070000
[ 0.372537] ...
[ 0.372540] Call Trace:
[ 0.372542] [<9000000005924778>] show_stack+0x38/0x180
[ 0.372548] [<90000000071519c4>] dump_stack_lvl+0x94/0xe4
[ 0.372555] [<900000000599b880>] __might_resched+0x1a0/0x260
[ 0.372561] [<90000000071675cc>] rt_spin_lock+0x4c/0x140
[ 0.372565] [<9000000005cbb768>] __rmqueue_pcplist+0x308/0xea0
[ 0.372570] [<9000000005cbed84>] get_page_from_freelist+0x564/0x1c60
[ 0.372575] [<9000000005cc0d98>] __alloc_pages_noprof+0x218/0x1820
[ 0.372580] [<900000000593b36c>] tlb_init+0x1ac/0x298
[ 0.372585] [<9000000005924b74>] per_cpu_trap_init+0x114/0x140
[ 0.372589] [<9000000005921964>] cpu_probe+0x4e4/0xa60
[ 0.372592] [<9000000005934874>] start_secondary+0x34/0xc0
[ 0.372599] [<900000000715615c>] smpboot_entry+0x64/0x6c
This is because in PREEMPT_RT kernels normal spinlocks are replaced by
rt spinlocks and rt_spin_lock() will cause sleeping. Fix it by disabling
NUMA optimization completely for PREEMPT_RT kernels.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Now the min_delta is 0x600 (1536) for LoongArch's constant clockevent
device. For a 100MHz hardware timer this means ~15us. This is a little
big, especially for PREEMPT_RT enabled kernels. So reduce it to 100 for
PREEMPT_RT kernel, and 1000 for others (we don't want too small values
to affect performance).
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
(1) Description of Problem:
When testing BPF JIT with the latest compiler toolchains on LoongArch,
there exist some strange failed test cases, dmesg shows something like
this:
# dmesg -t | grep FAIL | head -1
... ret -3 != -3 (0xfffffffd != 0xfffffffd)FAIL ...
(2) Steps to Reproduce:
# echo 1 > /proc/sys/net/core/bpf_jit_enable
# modprobe test_bpf
(3) Additional Info:
There are no failed test cases compiled with the lower version of GCC
such as 13.3.0, while the problems only appear with higher version of
GCC such as 14.2.0.
This is because the problems were hidden by the lower version of GCC due
to redundant sign extension instructions generated by compiler, but with
optimization of higher version of GCC, the sign extension instructions
have been removed.
(4) Root Cause Analysis:
The LoongArch architecture does not expose sub-registers, and hold all
32-bit values in a sign-extended format. While BPF, on the other hand,
exposes sub-registers, and use zero-extension (similar to arm64/x86).
This has led to some subtle bugs, where a BPF JITted program has not
sign-extended the a0 register (return value in LoongArch land), passed
the return value up the kernel, for example:
| int from_bpf(void);
|
| long foo(void)
| {
| return from_bpf();
| }
Here, a0 would be 0xffffffff instead of the expected 0xffffffffffffffff.
Internally, the LoongArch JIT uses a5 as a dedicated register for BPF
return values. That is to say, the LoongArch BPF uses a5 for BPF return
values, which are zero-extended, whereas the LoongArch ABI uses a0 which
is sign-extended.
(5) Final Solution:
Keep a5 zero-extended, but explicitly sign-extend a0 (which is used
outside BPF land). Because libbpf currently defines the return value
of an ebpf program as a 32-bit unsigned integer, just use addi.w to
extend bit 31 into bits 63 through 32 of a5 to a0. This is similar to
commit 2f1b0d3d7331 ("riscv, bpf: Sign-extend return values").
Fixes: 5dc615520c4d ("LoongArch: Add BPF JIT support")
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Whenever I try to build the kernel with upcoming GCC 15 which defaults
to -std=gnu23 I get a build failure:
CC arch/loongarch/vdso/vgetcpu.o
In file included from ./include/uapi/linux/posix_types.h:5,
from ./include/uapi/linux/types.h:14,
from ./include/linux/types.h:6,
from ./include/linux/kasan-checks.h:5,
from ./include/asm-generic/rwonce.h:26,
from ./arch/loongarch/include/generated/asm/rwonce.h:1,
from ./include/linux/compiler.h:317,
from ./include/asm-generic/bug.h:5,
from ./arch/loongarch/include/asm/bug.h:60,
from ./include/linux/bug.h:5,
from ./include/linux/mmdebug.h:5,
from ./include/linux/mm.h:6,
from ./arch/loongarch/include/asm/vdso.h:10,
from arch/loongarch/vdso/vgetcpu.c:6:
./include/linux/stddef.h:11:9: error: expected identifier before 'false'
11 | false = 0,
| ^~~~~
./include/linux/types.h:35:33: error: two or more data types in declaration specifiers
35 | typedef _Bool bool;
| ^~~~
./include/linux/types.h:35:1: warning: useless type name in empty declaration
35 | typedef _Bool bool;
| ^~~~~~~
The kernel builds explicitly with -std=gnu11 in top Makefile, but
arch/loongarch/vdso does not use KBUILD_CFLAGS from the rest of the
kernel, just add -std=gnu11 flag to arch/loongarch/vdso/Makefile.
By the way, commit e8c07082a810 ("Kbuild: move to -std=gnu11") did a
similar change for arch/arm64/kernel/vdso32/Makefile.
Fixes: c6b99bed6b8f ("LoongArch: Add VDSO and VSYSCALL support")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
LoongArch's toolchain may change the default code model from normal to
medium. This is unnecessary for kernel, and generates some relocations
which cannot be handled by the module loader. So explicitly specify the
code model to normal in Makefile (for Rust 'normal' is 'small').
Cc: stable@vger.kernel.org
Tested-by: Haiyong Sun <sunhaiyong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"No core changes this time.
New drivers:
- Xlinix Versal pin control driver
- Ocelot LAN969x pin control driver
- T-Head TH1520 RISC-V SoC pin control driver
- Qualcomm SM8750, IPQ5424, QCS8300, SAR2130P and QCS615 SoC pin
control drivers
- Qualcomm SM8750 LPASS (low power audio subsystem) pin control
driver
- Qualcomm PM8937 mixsig IC pin control support, GPIO and MPP
(multi-purpose-pin)
- Samsung Exynos8895 and Exynos9810 SoC pin control driver
- SpacemiT K1 SoC pin control driver
- Airhoa EN7581 IC pin control driver
Improvements:
- The Renesas subdriver now supports schmitt-trigger and open drain
pin configurations if the hardware supports it
- Support GPIOF and GPIOG banks in the Aspeed G6 SoC
- Support the DSW community in the Intel Elkhartlake SoC"
* tag 'pinctrl-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (105 commits)
pinctrl: airoha: Use unsigned long for bit search
pinctrl: k210: Undef K210_PC_DEFAULT
pinctrl: qcom: spmi: fix debugfs drive strength
pinctrl: qcom: Add sm8750 pinctrl driver
dt-bindings: pinctrl: qcom: Add sm8750 pinctrl
pinctrl: cy8c95x0: remove unneeded goto labels
pinctrl: cy8c95x0: embed iterator to the for-loop
pinctrl: cy8c95x0: Use temporary variable for struct device
pinctrl: cy8c95x0: use flexible sleeping in reset function
pinctrl: cy8c95x0: switch to using devm_regulator_get_enable()
pinctrl: cy8c95x0: Use 2-argument strscpy()
dt-bindings: pinctrl: sx150xq: allow gpio line naming
pinctrl: single: add marvell,pxa1908-padconf compatible
dt-bindings: pinctrl: pinctrl-single: add marvell,pxa1908-padconf compatible
dt-bindings: pinctrl: correct typo of description for cv1800
pinctrl: qcom: spmi-mpp: Add PM8937 compatible
dt-bindings: pinctrl: qcom,pmic-mpp: Document PM8937 compatible
pinctrl: qcom-pmic-gpio: add support for PM8937
dt-bindings: pinctrl: qcom,pmic-gpio: add PM8937
pinctrl: Use of_property_present() for non-boolean properties
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- The series "resource: A couple of cleanups" from Andy Shevchenko
performs some cleanups in the resource management code
- The series "Improve the copy of task comm" from Yafang Shao addresses
possible race-induced overflows in the management of
task_struct.comm[]
- The series "Remove unnecessary header includes from
{tools/}lib/list_sort.c" from Kuan-Wei Chiu adds some cleanups and a
small fix to the list_sort library code and to its selftest
- The series "Enhance min heap API with non-inline functions and
optimizations" also from Kuan-Wei Chiu optimizes and cleans up the
min_heap library code
- The series "nilfs2: Finish folio conversion" from Ryusuke Konishi
finishes off nilfs2's folioification
- The series "add detect count for hung tasks" from Lance Yang adds
more userspace visibility into the hung-task detector's activity
- Apart from that, singelton patches in many places - please see the
individual changelogs for details
* tag 'mm-nonmm-stable-2024-11-24-02-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (71 commits)
gdb: lx-symbols: do not error out on monolithic build
kernel/reboot: replace sprintf() with sysfs_emit()
lib: util_macros_kunit: add kunit test for util_macros.h
util_macros.h: fix/rework find_closest() macros
Improve consistency of '#error' directive messages
ocfs2: fix uninitialized value in ocfs2_file_read_iter()
hung_task: add docs for hung_task_detect_count
hung_task: add detect count for hung tasks
dma-buf: use atomic64_inc_return() in dma_buf_getfile()
fs/proc/kcore.c: fix coccinelle reported ERROR instances
resource: avoid unnecessary resource tree walking in __region_intersects()
ocfs2: remove unused errmsg function and table
ocfs2: cluster: fix a typo
lib/scatterlist: use sg_phys() helper
checkpatch: always parse orig_commit in fixes tag
nilfs2: convert metadata aops from writepage to writepages
nilfs2: convert nilfs_recovery_copy_block() to take a folio
nilfs2: convert nilfs_page_count_clean_buffers() to take a folio
nilfs2: remove nilfs_writepage
nilfs2: convert checkpoint file to be folio-based
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull rust trace event support from Steven Rostedt:
"Allow Rust code to have trace events
Trace events is a popular way to debug what is happening inside the
kernel or just to find out what is happening. Rust code is being added
to the Linux kernel but it currently does not support the tracing
infrastructure. Add support of trace events inside Rust code"
* tag 'trace-rust-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rust: jump_label: skip formatting generated file
jump_label: rust: pass a mut ptr to `static_key_count`
samples: rust: fix `rust_print` build making it a combined module
rust: add arch_static_branch
jump_label: adjust inline asm to be consistent
rust: samples: add tracepoint to Rust sample
rust: add tracepoint support
rust: add static_branch_unlikely for static_key_false
|
|
When the size isn't a small constant, __access_ok() will call
valid_user_address() with the address after the last byte of the user
buffer.
It is valid for a buffer to end with the last valid user address so
valid_user_address() must allow accesses to the base of the guard page.
[ This introduces an off-by-one in the other direction for the plain
non-sized accesses, but since we have that guard region that is a
whole page, those checks "allowing" accesses to that guard region
don't really matter. The access will fault anyway, whether to the
guard page or if the address has been masked to all ones - Linus ]
Fixes: 86e6b1547b3d0 ("x86: fix user address masking non-canonical speculation issue")
Signed-off-by: David Laight <david.laight@aculab.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Josh Poimboeuf reports that he got a "will-it-scale.per_process_ops 1.9%
improvement" report for his patch that changed __get_user() to use
pointer masking instead of the explicit speculation barrier. However,
that patch doesn't actually work in the general case, because some (very
bad) architecture-specific code actually depends on __get_user() also
working on kernel addresses.
A profile showed that the offending __get_user() was the futex code,
which really should be fixed up to not use that horrid legacy case.
Rewrite futex_get_value_locked() to use the modern user acccess helpers,
and inline it so that the compiler not only avoids the function call for
a few instructions, but can do CSE on the address masking.
It also turns out the x86 futex functions have unnecessary barriers in
other places, so let's fix those up too.
Link: https://lore.kernel.org/all/20241115230653.hfvzyf3aqqntgp63@jpoimboe/
Reported-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
- Detect some Thunderbolt chips that are built-in and hence 'trustworthy'
by a heuristic since the 'ExternalFacingPort' and 'usb4-host-interface'
ACPI properties are not quite enough (Esther Shimanovich)
* pci/thunderbolt:
PCI: Detect and trust built-in Thunderbolt chips
|
|
Commit c98d2ecae08f ("s390/mm: Uncouple physical vs virtual address
spaces") introduced a large_allowed() helper that restricts which mapping
modes can use large pages. This change unintentionally prevented KASAN
shadow mappings from using large pages, despite there being no reason
to avoid them. In fact, large pages are preferred for performance.
Add POPULATE_KASAN_MAP_SHADOW to the allowed list in large_allowed()
to restore large page mappings for KASAN shadows.
While large_allowed() isn't strictly necessary with current mapping
modes since disallowed modes either don't map anything or fail alignment
and size checks, keep it for clarity.
Fixes: c98d2ecae08f ("s390/mm: Uncouple physical vs virtual address spaces")
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
