summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2013-06-20KVM: s390: Check for access exceptions during TPIThomas Huth
When a guest calls the TPI instruction, the second operand address could point to an invalid location. In this case the problem should be signaled to the guest by throwing an access exception. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-20KVM: s390: Check for PSTATE when handling DIAGNOSEThomas Huth
DIAGNOSE is a privileged instruction and thus we must make sure that we are in supervisor mode before taking any other actions. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-20KVM: s390: Privileged operation checks moved to instruction handlersThomas Huth
We need more fine-grained control about the point in time when we check for privileged instructions, since the exceptions that can happen during an instruction have a well-defined priority. For example, for the PFMF instruction, the check for PGM_PRIVILEGED_OP must happen after the check for PGM_OPERATION since the latter has a higher precedence - thus the check for privileged operation must not be done in kvm_s390_handle_b9() already. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-20KVM: s390: Privileged operation check for TPROTThomas Huth
TPROT is a privileged instruction and thus should generate a privileged operation exception when the problem state bit is not cleared in the PSW. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-20KVM: s390: Renamed PGM_PRIVILEGED_OPERATIONThomas Huth
Renamed the PGM_PRIVILEGED_OPERATION define to PGM_PRIVILEGED_OP since this define was way longer than the other PGM_* defines and caused the code often to exceed the 80 columns limit when not split to multiple lines. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-17KVM: s390: Fix epsw instruction decodingThomas Huth
The handle_epsw() function calculated the first register in the wrong way, so that it always used r0 by mistake. Now the code uses the common helper function for decoding the registers of rre functions instead to avoid such mistakes. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-17KVM: s390,perf: Detect if perf samples belong to KVM host or guestHeinz Graalfs
This patch is based on an original patch of David Hildenbrand. The perf core implementation calls architecture specific code in order to ask for specific information for a particular sample: perf_instruction_pointer() When perf core code asks for the instruction pointer, architecture specific code must detect if a KVM guest was running when the sample was taken. A sample can be associated with a KVM guest when the PSW supervisor state bit is set and the PSW instruction pointer part contains the address of 'sie_exit'. A KVM guest's instruction pointer information is then retrieved via gpsw entry pointed to by the sie control-block. perf_misc_flags() perf code code calls this function in order to associate the kernel vs. user state infomation with a particular sample. Architecture specific code must also first detectif a KVM guest was running at the time the sample was taken. Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-17KVM: s390: Use common waitqueueChristian Borntraeger
Lets use the common waitqueue for kvm cpus on s390. By itself it is just a cleanup, but it should also improve the accuracy of diag 0x44 which is implemented via kvm_vcpu_on_spin. kvm_vcpu_on_spin has an explicit check for waiting on the waitqueue to optimize the yielding. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-17KVM: s390: code cleanup to use common vcpu slab cacheMichael Mueller
cleanup of arch specific code to use common code provided vcpu slab cache instead of kzalloc() provided memory Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-17KVM: s390: guest large pagesChristian Borntraeger
This patch enables kvm to give large pages to the guest. The heavy lifting is done by the hardware, the host only has to take care of the PFMF instruction, which is also part of EDAT-1. We also support the non-quiescing key setting facility if the host supports it, to behave similar to the interpretation of sske. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-17KVM: s390: Provide function for setting the guest storage keyChristian Borntraeger
From time to time we need to set the guest storage key. Lets provide a helper function that handles the changes with all the right locking and checking. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-12KVM: x86: handle idiv overflow at kvm_write_tscMarcelo Tosatti
Its possible that idivl overflows (due to large delta stored in usdiff, valid scenario). Create an exception handler to catch the overflow exception (division by zero is protected by vcpu->arch.virtual_tsc_khz check), and interpret it accordingly (delta is larger than USEC_PER_SEC). Fixes https://bugzilla.redhat.com/show_bug.cgi?id=969644 Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-06-05KVM: MMU: reduce KVM_REQ_MMU_RELOAD when root page is zappedGleb Natapov
Quote Gleb's mail: | why don't we check for sp->role.invalid in | kvm_mmu_prepare_zap_page before calling kvm_reload_remote_mmus()? and | Actually we can add check for is_obsolete_sp() there too since | kvm_mmu_invalidate_all_pages() already calls kvm_reload_remote_mmus() | after incrementing mmu_valid_gen. [ Xiao: add some comments and the check of is_obsolete_sp() ] Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-06-05KVM: MMU: reclaim the zapped-obsolete page firstXiao Guangrong
As Marcelo pointed out that | "(retention of large number of pages while zapping) | can be fatal, it can lead to OOM and host crash" We introduce a list, kvm->arch.zapped_obsolete_pages, to link all the pages which are deleted from the mmu cache but not actually freed. When page reclaiming is needed, we always zap this kind of pages first. Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-06-05KVM: MMU: collapse TLB flushes when zap all pagesXiao Guangrong
kvm_zap_obsolete_pages uses lock-break technique to zap pages, it will flush tlb every time when it does lock-break We can reload mmu on all vcpus after updating the generation number so that the obsolete pages are not used on any vcpus, after that we do not need to flush tlb when obsolete pages are zapped It will do kvm_mmu_prepare_zap_page many times and use one kvm_mmu_commit_zap_page to collapse tlb flush, the side-effects is that causes obsolete pages unlinked from active_list but leave on hash-list, so we add the comment around the hash list walker Note: kvm_mmu_commit_zap_page is still needed before free the pages since other vcpus may be doing locklessly shadow page walking Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-06-05KVM: MMU: zap pages in batchXiao Guangrong
Zap at lease 10 pages before releasing mmu-lock to reduce the overload caused by requiring lock After the patch, kvm_zap_obsolete_pages can forward progress anyway, so update the comments [ It improves the case 0.6% ~ 1% that do kernel building meanwhile read PCI ROM. ] Note: i am not sure that "10" is the best speculative value, i just guessed that '10' can make vcpu do not spend long time on kvm_zap_obsolete_pages and do not cause mmu-lock too hungry. Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-06-05KVM: MMU: do not reuse the obsolete pageXiao Guangrong
The obsolete page will be zapped soon, do not reuse it to reduce future page fault Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-06-05KVM: MMU: add tracepoint for kvm_mmu_invalidate_all_pagesXiao Guangrong
It is good for debug and development Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-06-05KVM: MMU: show mmu_valid_gen in shadow page related tracepointsXiao Guangrong
Show sp->mmu_valid_gen Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-06-05KVM: x86: use the fast way to invalidate all pagesXiao Guangrong
Replace kvm_mmu_zap_all by kvm_mmu_invalidate_zap_all_pages Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-06-05KVM: MMU: fast invalidate all pagesXiao Guangrong
The current kvm_mmu_zap_all is really slow - it is holding mmu-lock to walk and zap all shadow pages one by one, also it need to zap all guest page's rmap and all shadow page's parent spte list. Particularly, things become worse if guest uses more memory or vcpus. It is not good for scalability In this patch, we introduce a faster way to invalidate all shadow pages. KVM maintains a global mmu invalid generation-number which is stored in kvm->arch.mmu_valid_gen and every shadow page stores the current global generation-number into sp->mmu_valid_gen when it is created When KVM need zap all shadow pages sptes, it just simply increase the global generation-number then reload root shadow pages on all vcpus. Vcpu will create a new shadow page table according to current kvm's generation-number. It ensures the old pages are not used any more. Then the obsolete pages (sp->mmu_valid_gen != kvm->arch.mmu_valid_gen) are zapped by using lock-break technique Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-06-05KVM: MMU: drop unnecessary kvm_reload_remote_mmusXiao Guangrong
It is the responsibility of kvm_mmu_zap_all that keeps the consistent of mmu and tlbs. And it is also unnecessary after zap all mmio sptes since no mmio spte exists on root shadow page and it can not be cached into tlb Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-06-05KVM: x86: drop calling kvm_mmu_zap_all in emulator_fix_hypercallXiao Guangrong
Quote Gleb's mail: | Back then kvm->lock protected memslot access so code like: | | mutex_lock(&vcpu->kvm->lock); | kvm_mmu_zap_all(vcpu->kvm); | mutex_unlock(&vcpu->kvm->lock); | | which is what 7aa81cc0 does was enough to guaranty that no vcpu will | run while code is patched. This is no longer the case and | mutex_lock(&vcpu->kvm->lock); is gone from that code path long time ago, | so now kvm_mmu_zap_all() there is useless and the code is incorrect. So we drop it and it will be fixed later Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-06-03KVM: s390: Add "devname:kvm" alias.Cornelia Huck
Providing a "devname:kvm" module alias enables automatic loading of the kvm module when /dev/kvm is opened. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-05-21KVM: x86 emulator: convert XADD to fastopAvi Kivity
Signed-off-by: Avi Kivity <avi.kivity@gmail.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-05-21KVM: x86 emulator: drop unused old-style inline emulationAvi Kivity
Signed-off-by: Avi Kivity <avi.kivity@gmail.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-05-21KVM: x86 emulator: convert DIV/IDIV to fastopAvi Kivity
Since DIV and IDIV can generate exceptions, we need an additional output parameter indicating whether an execption has occured. To avoid increasing register pressure on i386, we use %rsi, which is already allocated for the fastop code pointer. Gleb: added comment about fop usage as exception indication. Signed-off-by: Avi Kivity <avi.kivity@gmail.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-05-21KVM: x86 emulator: convert single-operand MUL/IMUL to fastopAvi Kivity
Signed-off-by: Avi Kivity <avi.kivity@gmail.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-05-21KVM: x86 emulator: Switch fastop src operand to RDXAvi Kivity
This makes OpAccHi useful. Signed-off-by: Avi Kivity <avi.kivity@gmail.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-05-21KVM: x86 emulator: switch MUL/DIV to DstXaccAvi Kivity
Signed-off-by: Avi Kivity <avi.kivity@gmail.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-05-21KVM: x86 emulator: decode extended accumulator explicityAvi Kivity
Single-operand MUL and DIV access an extended accumulator: AX for byte instructions, and DX:AX, EDX:EAX, or RDX:RAX for larger-sized instructions. Add support for fetching the extended accumulator. In order not to change things too much, RDX is loaded into Src2, which is already loaded by fastop(). This avoids increasing register pressure on i386. Gleb: disable src writeback for ByteOp div/mul. Signed-off-by: Avi Kivity <avi.kivity@gmail.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-05-21KVM: x86 emulator: add support for writing back the source operandAvi Kivity
Some instructions write back the source operand, not just the destination. Add support for doing this via the decode flags. Gleb: add BUG_ON() to prevent source to be memory operand. Signed-off-by: Avi Kivity <avi.kivity@gmail.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-05-21s390: fix gmap_ipte_notifier vs. software dirty pagesChristian Borntraeger
On heavy paging load some guest cpus started to loop in gmap_ipte_notify. This was visible as stalled cpus inside the guest. The gmap_ipte_notifier tries to map a user page and then made sure that the pte is valid and writable. Turns out that with the software change bit tracking the pte can become read-only (and only software writable) if the page is clean. Since we loop in this code, the page would stay clean and, therefore, be never writable again. Let us just use fixup_user_fault, that guarantees to call handle_mm_fault. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-05-21s390/kvm: avoid automatic sie reentryMartin Schwidefsky
Do not automatically restart the sie instruction in entry64.S after an interrupt, return to the caller with a reason code instead. That allows to deal with RCU and other conditions in C code. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-05-21s390/kvm: Kick guests out of sie if prefix page host pte is touchedChristian Borntraeger
The guest prefix pages must be mapped writeable all the time while SIE is running, otherwise the guest might see random behaviour. (pinned at the pte level) Turns out that mlocking is not enough, the page table entry (not the page) might change or become r/o. This patch uses the gmap notifiers to kick guest cpus out of SIE. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-05-21s390/kvm: Provide a way to prevent reentering SIEChristian Borntraeger
Lets provide functions to prevent KVM from reentering SIE and to kick cpus out of SIE. We cannot use the common kvm_vcpu_kick code, since we need to kick out guests in places that hold architecture specific locks (e.g. pgste lock) which might be necessary on the other cpus - so no waiting possible. So lets provide a bit in a private field of the sie control block that acts as a gate keeper, after we claimed we are in SIE. Please note that we do not reuse prog0c, since we want to access that bit without atomic ops. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-05-21s390/kvm: Mark if a cpu is in SIEChristian Borntraeger
Lets track in a private bit if the sie control block is active. We want to track this as closely as possible, so we also have to instrument the interrupt and program check handler. Lets use the existing HANDLE_SIE_INTERCEPT macro. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-05-21s390/kvm: rename RCP_xxx defines to PGSTE_xxxMartin Schwidefsky
The RCP byte is a part of the PGSTE value, the existing RCP_xxx names are inaccurate. As the defines describe bits and pieces of the PGSTE, the names should start with PGSTE_. The KVM_UR_BIT and KVM_UC_BIT are part of the PGSTE as well, give them better names as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-05-21s390/kvm: fix psw rewinding in handle_skeyMartin Schwidefsky
The PSW can wrap if the guest has been running in the 24 bit or 31 bit addressing mode. Use __rewind_psw to find the correct address. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-05-21s390/pgtable: fix ipte notify bitChristian Borntraeger
Dont use the same bit as user referenced. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-05-19KVM: get rid of $(addprefix ../../../virt/kvm/, ...) in MakefilesMarc Zyngier
As requested by the KVM maintainers, remove the addprefix used to refer to the main KVM code from the arch code, and replace it with a KVM variable that does the same thing. Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Christoffer Dall <cdall@cs.columbia.edu> Acked-by: Xiantao Zhang <xiantao.zhang@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Alexander Graf <agraf@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-05-19ARM: KVM: move GIC/timer code to a common locationMarc Zyngier
As KVM/arm64 is looming on the horizon, it makes sense to move some of the common code to a single location in order to reduce duplication. The code could live anywhere. Actually, most of KVM is already built with a bunch of ugly ../../.. hacks in the various Makefiles, so we're not exactly talking about style here. But maybe it is time to start moving into a less ugly direction. The include files must be in a "public" location, as they are accessed from non-KVM files (arch/arm/kernel/asm-offsets.c). For this purpose, introduce two new locations: - virt/kvm/arm/ : x86 and ia64 already share the ioapic code in virt/kvm, so this could be seen as a (very ugly) precedent. - include/kvm/ : there is already an include/xen, and while the intent is slightly different, this seems as good a location as any Eventually, we should probably have independant Makefiles at every levels (just like everywhere else in the kernel), but this is just the first step. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-05-16KVM: MMU: clenaup locking in mmu_free_roots()Gleb Natapov
Do locking around each case separately instead of having one lock and two unlocks. Move root_hpa assignment out of the lock. Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-05-15KVM: x86: limit difference between kvmclock updatesMarcelo Tosatti
kvmclock updates which are isolated to a given vcpu, such as vcpu->cpu migration, should not allow system_timestamp from the rest of the vcpus to remain static. Otherwise ntp frequency correction applies to one vcpu's system_timestamp but not the others. So in those cases, request a kvmclock update for all vcpus. The worst case for a remote vcpu to update its kvmclock is then bounded by maximum nohz sleep latency. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-05-14KVM: x86: Remove support for reporting coalesced APIC IRQsJan Kiszka
Since the arrival of posted interrupt support we can no longer guarantee that coalesced IRQs are always reported to the IRQ source. Moreover, accumulated APIC timer events could cause a busy loop when a VCPU should rather be halted. The consensus is to remove coalesced tracking from the LAPIC. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-05-12KVM: MMU: Use kvm_mmu_sync_roots() in kvm_mmu_load()Takuya Yoshikawa
No need to open-code this function. Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-05-11Merge tag 'stable/for-linus-3.10-rc0-tag-two' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen bug-fixes from Konrad Rzeszutek Wilk: - More fixes in the vCPU PVHVM hotplug path. - Add more documentation. - Fix various ARM related issues in the Xen generic drivers. - Updates in the xen-pciback driver per Bjorn's updates. - Mask the x2APIC feature for PV guests. * tag 'stable/for-linus-3.10-rc0-tag-two' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/pci: Used cached MSI-X capability offset xen/pci: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASK xen: clear IRQ_NOAUTOEN and IRQ_NOREQUEST xen: mask x2APIC feature in PV xen: SWIOTLB is only used on x86 xen/spinlock: Fix check from greater than to be also be greater or equal to. xen/smp/pvhvm: Don't point per_cpu(xen_vpcu, 33 and larger) to shared_info xen/vcpu: Document the xen_vcpu_info and xen_vcpu xen/vcpu/pvhvm: Fix vcpu hotplugging hanging.
2013-05-11Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull idle update from Len Brown: "Add support for new Haswell-ULT CPU idle power states" * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: intel_idle: initial C8, C9, C10 support tools/power turbostat: display C8, C9, C10 residency
2013-05-11Merge git://git.infradead.org/users/eparis/auditLinus Torvalds
Pull audit changes from Eric Paris: "Al used to send pull requests every couple of years but he told me to just start pushing them to you directly. Our touching outside of core audit code is pretty straight forward. A couple of interface changes which hit net/. A simple argument bug calling audit functions in namei.c and the removal of some assembly branch prediction code on ppc" * git://git.infradead.org/users/eparis/audit: (31 commits) audit: fix message spacing printing auid Revert "audit: move kaudit thread start from auditd registration to kaudit init" audit: vfs: fix audit_inode call in O_CREAT case of do_last audit: Make testing for a valid loginuid explicit. audit: fix event coverage of AUDIT_ANOM_LINK audit: use spin_lock in audit_receive_msg to process tty logging audit: do not needlessly take a lock in tty_audit_exit audit: do not needlessly take a spinlock in copy_signal audit: add an option to control logging of passwords with pam_tty_audit audit: use spin_lock_irqsave/restore in audit tty code helper for some session id stuff audit: use a consistent audit helper to log lsm information audit: push loginuid and sessionid processing down audit: stop pushing loginid, uid, sessionid as arguments audit: remove the old depricated kernel interface audit: make validity checking generic audit: allow checking the type of audit message in the user filter audit: fix build break when AUDIT_DEBUG == 2 audit: remove duplicate export of audit_enabled Audit: do not print error when LSMs disabled ...
2013-05-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal Pull stray syscall bits from Al Viro: "Several syscall-related commits that were missing from the original" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: switch compat_sys_sysctl to COMPAT_SYSCALL_DEFINE unicore32: just use mmap_pgoff()... unify compat fanotify_mark(2), switch to COMPAT_SYSCALL_DEFINE x86, vm86: fix VM86 syscalls: use SYSCALL_DEFINEx(...)
generated by cgit v1.2.3 (git 2.25.1) at 2025-03-17 08:10:01 +0000