summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts
AgeCommit message (Collapse)Author
2017-08-26arm64: dts: uniphier: add reset controller node of analog amplifierKatsuhiro Suzuki
This patch adds reset controller node of analog signal amplifier core (ADAMV) for UniPhier LD11/LD20 SoCs. Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-25arm64: dts: exynos: remove i80-if-timings nodesAndrzej Hajda
Since i80/command mode is determined in runtime by propagating info from panel this property can be removed. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-08-24Merge tag 'v4.14-rockchip-dts64-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64 Pull "second round of Rockchip dts64 changes for 4.14" from Heiko Stübner: 3 new boards, the rk3328-based Rock64 from the Pine64-makers, the Sapphire som+baseboard which is another evaluation board for Rocckhip customers and the rk3399-based som+baseboard from Austria-based Theobroma Systems, which interestingly is in a miniITX formfactor and provides a real PCIe x4 slot. New nodes include on rk3399 graphics (vops, hdmi, etc) and more iommus, on rk3328 iommus, pwm, thermal management, and sound as well as operating points and rk3368 got iommu nodes and cpu operating points. On existing boards firefly got operating points, the rk3328-evb got its pmic and gru boards got some sound-related fixes. * tag 'v4.14-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (29 commits) arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM dt-bindings: add rk3399-q7 SoM arm64: dts: rockchip: add rk3328-rock64 board arm64: dts: rockchip: add rk3328 pdm node arm64: dts: rockchip: add more rk3399 iommu nodes arm64: dts: rockchip: add rk3368 iommu nodes arm64: dts: rockchip: add rk3328 iommu nodes arm64: dts: rockchip: Add basic cpu frequencies for RK3368 arm64: dts: rockchip: add rk805 node for rk3328-evb arm64: dts: rockchip: Assign mic irq to correct device for Gru arm64: dts: rockchip: init rk3399 vop clock rates arm64: dts: rockchip: Add pwm nodes for rk3328 arm64: dts: rockchip: Fix wrong rt5514 dmic delay property for Gru arm64: dts: rockchip: disable tx ipgap linecheck for rk3399 dwc3 arm64: dts: rockchip: remove num-slots property from rk3399-sapphire arm64: dts: rockchip: Enable tsadc module on RK3328 eavluation board arm64: dts: rockchip: add thermal nodes for rk3328 SoC arm64: dts: rockchip: add tsadc node for rk3328 SoC arm64: dts: rockchip: add rk3328 i2s nodes ...
2017-08-24arm64: dts: marvell: add Device Tree files for Armada-8KPHanna Hawa
This commit adds the base Device Tree files for the Armada 8KPlus. The Armada 8KP SoCs include several hardware blocks, and this commit only adds support for the AP810 block, that contains the CPU core and basic peripherals. AP810 is a high-performance die, includes octal core application processor based ARMv8-A architecture, two standard high speed DDR4 interface, and GIC-600 interrupt controller. AP810 Built as part of Marvell’s MoChi AP family products. Armada-8080 (8KPlus family), include an AP810 block that contains the CPU core and basic peripherals. This commit creates the following hierarchy: * armada-ap810-ap0.dtsi - definitions common to AP810 * armada-ap810-ap0-octa-core.dtsi - description of the octa cores * armada-8080.dtsi - description of the 8080 SoC * armada-8080-db.dts - description of the 8080 board Signed-off-by: Hanna Hawa <hannah@marvell.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-08-23arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoMKlaus Goger
Haikou is a Qseven and μQseven baseboard featuring PCIe, USB3 and a video connector for MIPI-DSI/CSI and eDP adapter. This dts is for usage with the RK3399-Q7 SoM Puma. Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-08-23arm64: dts: rockchip: add RK3399-Q7 (Puma) SoMKlaus Goger
The RK3399-Q7 SoM is a Qseven-compatible (70mm x 70mm, MXM-230 connector) system-on-module from Theobroma Systems, featuring the Rockchip RK3399. It provides the following feature set: * up to 4GB DDR3 * on-module SPI-NOR flash * on-module eMMC (with 8-bit 1.8V interface) * SD card (on a baseboad) via edge connector * Gigabit Ethernet with on-module Micrel KSZ9031 GbE PHY * HDMI/eDP/2x MIPI-DSI * 2x MIPI-CSI * USB - 1x USB 3.0 dual-role (direct connection) - 2x USB 3.0 host + 1x USB 2.0 (on-module USB 3.0 hub) * on-module STM32 Cortex-M0 companion controller, implementing: - low-power RTC functionality (ISL1208 emulation) - fan controller (AMC6821 emulation) - USB<->CAN bridge controller Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-08-23arm64: dts: rockchip: add rk3328-rock64 boardHeiko Stuebner
The ROCK64 is a credit card size 4K60P HDR Media Board Computer using the Rockchip RK3328 Quad-Core ARM Cortex A53 64-Bit Processor and supporting up to 4GB 1600MHz LPDDR3 memory. It provides eMMC module socket, MicroSD Card slot, Pi-2 Bus, Pi-P5+ Bus, USB 3.0 and many others peripheral devices interface for makers to integrate with sensors and devices. The devicetree currently supports basic peripherals, with more to be added later on. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-08-23arm64: dts: rockchip: add rk3328 pdm nodeSugar Zhang
This patch add pdm controller device node for rk3328. Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-08-22ARM64: dts: meson-gxl-libretech-cc: Add GPIO lines namesNeil Armstrong
This patch describes the GPIO lines usage on the LibreTech CC board. This is useful in the debugfs gpio file and using the cdev gpio API. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [khilman: minor whiespace fix] Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-08-22Merge tag 'v4.13-rc4' into v4.14/dt64Kevin Hilman
Linux 4.13-rc4
2017-08-22ARM64: dts: meson-gx: Add AO CEC nodesNeil Armstrong
This patch adds the AO CEC node in all the HDMI enabled boards DTS. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-08-22ARM64: dts: meson-gx: update AO clkc to new bindingsNeil Armstrong
The AO clkc needs to be updated to new bindings with an system control parent node and moving the clkc node as subnode. Also adds the SoC specific compatible following the bindings requirements. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-08-22Merge tag 'zynqmp-dt-for-4.14' of https://github.com/Xilinx/linux-xlnx into ↵Arnd Bergmann
next/dt64 Pull "arm64: Xilinx ZynqMP DT fixes for v4.14" from Michal Simek: - Fix DTC warnings - Add idle states, OP, cci-400, RTC, pcie prefetchable memory fpd/lpd dmas, clocks for ep108 - Enable can1 - Fix smmu IRQ, aliases, uart compatible string - Use generic compatible string for i2c eeprom * tag 'zynqmp-dt-for-4.14' of https://github.com/Xilinx/linux-xlnx: arm64: zynqmp: Add generic compatible string for I2C EEPROM arm64: zynqmp: Add missing mmc aliases in ep108 arm64: zynqmp: Enable can1 for ep108 arm64: zynqmp: Added clocks to DT for ep108 arm64: zynqmp: Use C pre-processor for includes arm64: zynqmp: Add fpd/lpd dmas arm64: zynqmp: Set status disabled in dtsi arm64: zynqmp: Add new uartps compatible string arm64: zynqmp: Correct IRQ nr for the SMMU arm64: zynqmp: Add support for RTC arm64: zynqmp: Adding prefetchable memory space to pcie node arm64: zynqmp: Add CCI-400 node arm64: zynqmp: Add dcc console for zynqmp arm64: zynqmp: Add operating points arm64: zynqmp: Add idle state for ZynqMP arm64: zynqmp: Add references to cpu nodes arm64: zynqmp: Move nodes which have no reg property out of bus arm64: zynqmp: Remove leading 0s from mtd table for spi flashes arm64: dts: xilinx: fix PCI bus dtc warnings
2017-08-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2017-08-21arm64: dts: rockchip: add more rk3399 iommu nodesSimon Xue
Add VPU/VDEC/IEP/ISP0/ISP1 iommu nodes Signed-off-by: Simon Xue <xxm@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-08-21arm64: dts: rockchip: add rk3368 iommu nodesSimon Xue
Add IEP/ISP/VOP/HEVC/VPU iommu nodes Signed-off-by: Simon Xue <xxm@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-08-21arm64: dts: rockchip: add rk3328 iommu nodesSimon Xue
Add H265e/VEPU/VPU/VDEC/VOP iommu nodes Signed-off-by: Simon Xue <xxm@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-08-21arm64: zynqmp: Add generic compatible string for I2C EEPROMJavier Martinez Canillas
The at24 driver allows to register I2C EEPROM chips using different vendor and devices, but the I2C subsystem does not take the vendor into account when matching using the I2C table since it only has device entries. But when matching using an OF table, both the vendor and device has to be taken into account so the driver defines only a set of compatible strings using the "atmel" vendor as a generic fallback for compatible I2C devices. So add this generic fallback to the device node compatible string to make the device to match the driver using the OF device ID table. Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-08-21arm64: zynqmp: Add missing mmc aliases in ep108Michal Simek
Add missing mmc aliases. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-08-21arm64: zynqmp: Enable can1 for ep108Naga Sureshkumar Relli
This patch enables can1 for ep108. Signed-off-by: Naga Sureshkumar Relli <nagasure@xilinx.com> Reviewed-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-08-21arm64: zynqmp: Added clocks to DT for ep108VNSL Durga
Added clks for ep108 platform. Signed-off-by: VNSL Durga <vnsldurg@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-08-21arm64: zynqmp: Use C pre-processor for includesAlistair Francis
Change the dtsi include code to use the C pre-processor #include instead of the device tree /include/. This enables option to use dt binding headers. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-08-21arm64: zynqmp: Add fpd/lpd dmasMichal Simek
Wire fpd and lpd dma channels to zynqmp.dtsi. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-08-21arm64: zynqmp: Set status disabled in dtsiNaga Sureshkumar Relli
Do not enable smmu via dtsi. Enable it in board file when needed. Signed-off-by: Naga Sureshkumar Relli <nagasure@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-08-21arm64: zynqmp: Add new uartps compatible stringMichal Simek
Mainline kernel has r1p12 compatible string now. Use this new compatible string and also append generic compatible string. Keep in your mind that using this generic compatible string not all uart features will be available. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Moritz Fischer <mdf@kernel.org>
2017-08-21arm64: zynqmp: Correct IRQ nr for the SMMUEdgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-08-21arm64: zynqmp: Add support for RTCMichal Simek
Add support for RTC. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-08-21arm64: zynqmp: Adding prefetchable memory space to pcie nodeBharat Kumar Gogada
Adding prefetchable memory space to pcie device tree node. Shifting configuration space to 64-bit address space. Removing pcie device tree node from amba as it requires size-cells=<2> in order to access 64-bit address space. Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-08-21arm64: zynqmp: Add CCI-400 nodeMichal Simek
Add CCI-400 node to DTSI. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-08-21arm64: zynqmp: Add dcc console for zynqmpMichal Simek
Add debug console to dtsi to be able to enable it in board dts file. Keep in your mind that every core has separate dcc port in case you want to run SMP kernel. DCC is very helpful communication channel for debugging. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-08-21arm64: zynqmp: Add operating pointsShubhrajyoti Datta
Adding operating-points-v2 for zynqmp. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-08-21arm64: zynqmp: Add idle state for ZynqMPStefan Krsmanovic
Added the idle-states node to describe zynqmp idle states. Only cpu-sleep-0 idle state is added in this patch. References to the idle-states node are added in all CPU nodes. Time values: entry/exit latencies and min-residency, needs to be tuned. arm,psci-suspend-param is selected to comply with PSCIv1.0 and Extended StateID format. Signed-off-by: Stefan Krsmanovic <stefan.krsmanovic@aggios.com> Acked-by: Will Wong <willw@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-08-21arm64: zynqmp: Add references to cpu nodesMichal Simek
Add missing references to all cpu nodes. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Moritz Fischer <mdf@kernel.org>
2017-08-21arm64: zynqmp: Move nodes which have no reg property out of busMichal Simek
Nodes without reg properties shouldn't be placed in amba node. Move them out. Warnings: arch/arm64/boot/dts/xilinx/zynqmp-ep108.dtb: Warning (simple_bus_reg): Node /amba/misc_clk missing or empty reg/ranges property arch/arm64/boot/dts/xilinx/zynqmp-ep108.dtb: Warning (simple_bus_reg): Node /amba/i2c_clk missing or empty reg/ranges property arch/arm64/boot/dts/xilinx/zynqmp-ep108.dtb: Warning (simple_bus_reg): Node /amba/sata_clk missing or empty reg/ranges property arch/arm64/boot/dts/xilinx/zynqmp-ep108.dtb: Warning (simple_bus_reg): Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-08-21arm64: dts: rockchip: Add basic cpu frequencies for RK3368Romain Perier
This adds and enable the operating points that have been tested and are currently supported by the SoC. This also adds clocks for ARMCLKL and ARMCLKB. Signed-off-by: Romain Perier <romain.perier@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-08-21arm64: dts: rockchip: add rk805 node for rk3328-evbJoseph Chen
RK805 consists of 4 DCDCs, 3 LDOs. It's different from RK808 and RK818 that there are 2 output only GPIOs, we should add properties "gpio-controller" and "gpio-cells = <2>". Signed-off-by: Joseph Chen <chenjh@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-08-21Merge tag 'sunxi-dt64-for-4.14-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt64 Pull "Allwinner arm64 device tree changes for 4.14, round 2" from Chen-Yu Tsai: The usual improvement patches: - PMIC, USB and WiFi enabled for Bananapi M64 - New board added: NanoPi A64 - New board added: Olimex A64-OLinuXino * tag 'sunxi-dt64-for-4.14-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: allwinner: a64: Add A64-OLinuXino initial support arm64: allwinner: a64: Add initial NanoPi A64 support arm64: allwinner: a64: add proper support for the Wi-Fi on BPi M64 arm64: allwinner: a64: enable AXP803 for Banana Pi M64 arm64: allwinner: a64: enable USB host controller for BPi M64
2017-08-19arm64: dts: rockchip: Assign mic irq to correct device for GruJeffy Chen
Currently we are assigning mic irq to rt5514 i2c driver, which is wrong. Assign it to rt5514 spi driver instead. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-08-19arm64: dts: rockchip: init rk3399 vop clock ratesKever Yang
We need to init vop aclk and hclk incase the U-Boot does not do the initialize. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Mark Yao <mark.yao@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-08-19arm64: dts: rockchip: Add pwm nodes for rk3328David Wu
There are 4 pwm channels built in rk3328 soc, need to configure the both APB clock and bus clock. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-08-19arm64: dts: rockchip: Fix wrong rt5514 dmic delay property for GruJeffy Chen
According to rt5514 dt-binding, it should be "realtek,dmic-init-delay-ms". Fixes: 48f4d9796d99 (arm64: dts: rockchip: add Gru/Kevin DTS) Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-08-18Merge tag 'mvebu-dt64-4.14-2' of git://git.infradead.org/linux-mvebu into ↵Arnd Bergmann
next/dt64 Pull "mvebu dt64 for 4.14 (part 2)" from Gregory CLEMENT: - Enable uSD on ESPRESSObin (Armada 37xx based board) - Add NAND support on Armada 7K/8K SoCs - Enable USB host on Armada-7040-DB and Armada-8040-DB boards * tag 'mvebu-dt64-4.14-2' of git://git.infradead.org/linux-mvebu: ARM64: dts: marvell: enable USB host on Armada-8040-DB ARM64: dts: marvell: enable USB host on Armada-7040-DB ARM64: dts: marvell: add NAND support on the CP110 ARM64: dts: marvell: armada-37xx: Enable uSD on ESPRESSObin arm64: dts: marvell: Fully re-order nodes in Marvell CP110 dtsi files
2017-08-18arm64: dts: apm: fix PCI bus dtc warningsRob Herring
dtc recently added PCI bus checks. Fix these warnings. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Duc Dang <dhdang@apm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-08-18Merge tag 'renesas-arm64-dt2-for-v4.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt64 Pull "Second Round of Renesas ARM64 Based SoC DT Updates for v4.14" from Simon Horman: * Add PFC device node to R-Car D3 (r8a77995) This is a step towards enabling devices that use multiplexed pins - including ethernet - on boards that use the r8a7796 SoC. * Add USB nodes to R-Car M3-W (r8a7796) This is a step towards enabling USB devices on boards that use the r8a7796 SoC. * Use newly added Gen-3 fallback compat string This is consistent with ongoing efforts to use per-generation fallback strings where appropriate across devices found on R-Car SoCs. The aim of the effort being to strike a balance between the limited information available about the compatibility of devices found on different SoCs and the desire to ease enabling devices on new SoCs. This has no run-time effect due to the presence of a per-SoC compat string. * Cleanup whitespace and extra LVDS port label Minor cleanups, no run-time effect. * tag 'renesas-arm64-dt2-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: dts: r8a77995: add pfc device node arm64: dts: r8a7796: Add HSUSB device node arm64: dts: r8a7796: Add USB-DMAC device nodes arm64: dts: r8a7796: Add USB3.0 host device node arm64: dts: r8a7796: add USB2.0 Host (EHCI/OHCI) device nodes arm64: dts: r8a7796: add usb2_phy device nodes arm64: dts: r8a7795: correct whitespace of companion property arm64: dts: r8a7795: Use R-Car SATA Gen3 fallback compat string arm64: dts: salvator-common: Remove extra LVDS port label
2017-08-18Merge tag 'qcom-arm64-for-4.14-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt64 Pull "Qualcomm ARM64 Updates for v4.14 Part 2" from Andy Gross: * Add IPQ8074 SoC and HK01 board support * tag 'qcom-arm64-for-4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: arm64: dts: Add ipq8074 SoC and HK01 board support
2017-08-18Merge tag 'arm-soc/for-4.14/devicetree' of ↵Arnd Bergmann
http://github.com/Broadcom/stblinux into next/dt Pull "Broadcom devicetree changes for 4.14" from Florian Fainelli: This pull request contains Broadcom ARM-based SoCs Device Tree changes for 4.14, please pull the following: - Eric moves the bcm2837 DT file from arm64 to arm because it created a maintenance problem and would have required either duplication or cross merges - Stefan changes how the pinmuxing is defined and pushes it at the board level to support Raspberry Pi Zero Wireless. He then adds supports for the actual Raspberry Pi Zero Wireless board along with binding documentation. Stefan also defines a proper SMP enable-method property and binding for BCM2836 (Raspbery Pi 2) - Rafal describes the BCM5301X USB ports correctly in Device Tree such that it becomes possible to assign them to specific LED triggers (e.g: USB activity). He does the same thing for BCM53573 and defines default LED triggers for USB. - Jon provides a fix for Northstar Plus which consists in correctly defining the "dma-coherent" property for peripherals which are DMA coherent. He also does a bit of re-arrangement of the USB DT nodes and finally adds USB 3 PHY and host controller support for NorthStar Plus - Florian adds support for Broadcom's BCM947189ACDBMR reference board which is based on BCM47182/53573 and which supports external MoCA (BCM6802) - Ray fixes the wrong UART2 base address for Cygnus - Scott moves the v3d node in the proper unit address order and defines the correct UART alias for the BCM91130_entphn reference board to be UART3 - Jason adds the DT node for the Cygnus Cortex-A9 Performance Monitoring Unit - Jonathan adds a bunch of additional peripherals to the Cygnus DTS include file: SDHCI, Keypad, SPI, DMA and pinmux configurations - Raveendra adds the Cygnus OHCI and EHCI Device Tree nodes * tag 'arm-soc/for-4.14/devicetree' of http://github.com/Broadcom/stblinux: ARM: BCM53573: Specify ports for USB LED for Tenda AC9 ARM: dts: cygnus: Add generic-ehci/ohci nodes ARM: dts: cygnus: add serial0 alias for uart3 on bcm91130_entphn ARM: dts: cygnus: Add additional peripherals to dtsi ARM: dts: cygnus: Enable Performance Monitoring Unit ARM: dts: cygnus: place v3d in proper address ordered location ARM: dts: cygnus: Fix incorrect UART2 register base ARM: dts: bcm283x: Add 32-bit enable method for SMP dt-bindings: arm: add SMP enable-method for BCM2836 ARM: dts: BCM53573: Add Broadcom BCM947189ACDBMR board support ARM: dts: BCM5301X: Specify USB ports for USB LEDs of few devices ARM: dts: NSP: Add USB3 and USB3 PHY to NSP ARM: dts: NSP: Rearrage USB entries ARM: dts: NSP: Add dma-coherent to relevant DT entries ARM: dts: bcm2835: Add Raspberry Pi Zero W dt-bindings: bcm: Add Raspberry Pi Zero W ARM: bcm283x: Define UART pinmuxing on board level ARM: dts: BCM5301X: Specify USB ports for each controller ARM: dts: bcm283x: Move the BCM2837 DT contents from arm64 to arm.
2017-08-18Merge tag 'zte-dt64-4.14' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt64 Pull "ZTE arm64 device tree updates for 4.14" from Shawn Guo: - A clean up patch from Shawn Lin to remove the deprecated dwmmc property 'num-slots' from ZX296718 device tree. - Enable various devices for ZX296718 SoC support, VGA display, I2S audio, pinctrl, GPIO, PWM and IRDEC. - Update zx296718-evb support to use audio-graph-card for HDMI audio and add I2S sound card. - Add initial zx296718-pcbox board support with storage, audio, display devices enabled. * tag 'zte-dt64-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: zte: add initial zx296718-pcbox board support arm64: dts: zx296718-evb: add I2S sound card support arm64: dts: zx296718-evb: use audio-graph-card for HDMI audio arm64: dts: zx296718: add irdec device for remote control arm64: dts: zx296718: add PWM device support arm64: dts: zx296718: add voltage data into OPP table arm64: dts: zx296718: set a better parent clock for I2S0 arm64: dts: zx296718: add pinctrl and gpio devices arm64: dts: zx296718: add I2S and I2C audio codec arm64: dts: zx296718: add VGA device support arm64: dts: zte: remove num-slots from zx296718
2017-08-18Merge tag 'imx-dt64-4.14' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt64 Pull "Freescale arm64 device tree updates for 4.14" from Shawn Guo: - Correct the typo in fsl-ls1088a-rdb board name. - A series from Horia Geantă to consolidate aliases node and enable crypto support for ls208xa and ls1088a. - Enable USB host support for ls1012a. - Enable cpuidle support for ls1088a and ls208xa. * tag 'imx-dt64-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: ls1088: Correction in Board name from "L1088A" to "LS1088A" arm64: dts: ls208xa: add cpu idle support arm64: dts: ls1088a: add cpu idle support arm64: dts: freescale: ls1088a: add crypto node arm64: dts: freescale: ls208xa: add crypto node arm64: dts: freescale: ls208xa: share aliases node arm64: dts: ls1012a: add USB host controller nodes
2017-08-18Merge tag 'arm-soc/for-4.14/devicetree-arm64' of ↵Arnd Bergmann
http://github.com/Broadcom/stblinux into next/dt64 Pull "Broadcom devicetree-arm64 changes for 4.14" from Florian Fainelli: This pull request contains Broadcom ARM64-based SoCs Device Tree changes for 4.14, please pull the following: - Scott moves all the Northstar 2 DTS files into a sub-directory to be consistent with what was done for stingray and to future proof the addition of new board DTS files - Velibor adds the ARM CCN-502 interconnect DT node to the Stingray SoC DTS include file - Srinath adds the MDIO multiplexer and SATA nodes to the Stingray DTS include files - Anup adds the SP804 timers, FlexRM (mailbox) and RAID engine DT nodes to the Stingray DTS include files - Abishek adds the BGMAC (Ethernet controller) node to the Stingray DTS files * tag 'arm-soc/for-4.14/devicetree-arm64' of http://github.com/Broadcom/stblinux: arm64: dts: Add SBA-RAID DT nodes for Stingray SoC arm64: dts: Add FlexRM DT nodes for Stingray arm64: dts: Add SATA DT nodes for Stingray SoC arm64: dts: Add DT node to enable BGMAC driver on Stingray arm64: dts: Add sp804 DT nodes for Stingray SoC arm64: dts: Add MDIO multiplexer DT node for Stingray arm64: dts: Enable stats for CCN-502 interconnect on Stingray arm64: dts: move ns2 into northstar2 directory
2017-08-18Merge tag 'v4.13-next-dts64' of https://github.com/mbgg/linux-mediatek into ↵Arnd Bergmann
next/dt64 Pull "arm: mediatek: dts64 updates for v4.14" from Matthias Brugger: - add SoC mt7622 and its reference board - cleanup of dts bindings - mt6797: add watchdog and delete unused clock - add support for SoC mt2701 and it's eval board * tag 'v4.13-next-dts64' of https://github.com/mbgg/linux-mediatek: arm64: dts: Add Mediatek SoC MT2712 and evaluation board dts and Makefile dt-bindings: arm: Add bindings for Mediatek MT2712 SoC Platform arm64: dts: mediatek: Delete unused dummy clock for MT6797 arm64: dts: mediatek: add watchdog to MT6797 ARM: mediatek: dts: Add MT6797 binding ARM: mediatek: dts: Cleanup bindings documentation arm64: dts: mt7622: add dts file for MT7622 reference board variant 1 arm64: dts: mt7622: add basic nodes to the mt7622.dtsi file
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-25 03:11:35 +0000