summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-09-29clk: qcom: gdsc: add missing error handlingJohan Hovold
Since commit 7eb231c337e0 ("PM / Domains: Convert pm_genpd_init() to return an error code") pm_genpd_init() can return an error which the caller must handle. The current error handling was also incomplete as the runtime PM and regulator use counts were not balanced in all error paths. Add the missing error handling to the GDSC initialisation to avoid continuing as if nothing happened on errors. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220929155816.17425-1-johan+linaro@kernel.org
2022-09-27dt-bindings: clocks: qcom,gcc-sc8280xp: Fix typosAndrew Halaney
pipegmux and SuperSpeed are the proper spelling for those terms. Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220921153155.279182-1-ahalaney@redhat.com
2022-09-27clk: qcom: Add global clock controller driver for SM6375Konrad Dybcio
Add support for the global clock controller found on SM6375. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220921001303.56151-3-konrad.dybcio@somainline.org
2022-09-27dt-bindings: clock: add SM6375 QCOM global clock bindingsKonrad Dybcio
Add device tree bindings for global clock controller for SM6375 SoCs. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220921001303.56151-2-konrad.dybcio@somainline.org
2022-09-27clk: qcom: alpha: Add support for programming the PLL_FSM_LEGACY_MODE bitKonrad Dybcio
This is used on at least SM6375 and its variations. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220921001303.56151-1-konrad.dybcio@somainline.org
2022-09-27clk: qcom: gcc-sc7280: Update the .pwrsts for usb gdscsRajendra Nayak
The USB controllers on sc7280 do not retain the state when the system goes into low power state and the GDSCs are turned off. This results in the controllers reinitializing and re-enumerating all the connected devices (resulting in additional delay while coming out of suspend) Fix this by updating the .pwrsts for the USB GDSCs so they only transition to retention state in low power. Since sc7280 only supports cx (parent of usb gdscs) Retention, there are no cxcs offsets mentioned in order to support the Retention state. Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220920111517.10407-3-quic_rjendra@quicinc.com
2022-09-27clk: qcom: gcc-sc7180: Update the .pwrsts for usb gdscRajendra Nayak
The USB controller on sc7180 does not retain the state when the system goes into low power state and the GDSC is turned off. This results in the controller reinitializing and re-enumerating all the connected devices (resulting in additional delay while coming out of suspend) Fix this by updating the .pwrsts for the USB GDSC so it only transitions to retention state in low power. Since sc7180 only supports cx (parent of usb gdsc) Retention, there are no cxcs offsets mentioned in order to support the Retention state. Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220920111517.10407-2-quic_rjendra@quicinc.com
2022-09-27clk: qcom: gdsc: Fix the handling of PWRSTS_RET supportRajendra Nayak
GDSCs cannot be transitioned into a Retention state in SW. When either the RETAIN_MEM bit, or both the RETAIN_MEM and RETAIN_PERIPH bits are set, and the GDSC is left ON, the HW takes care of retaining the memory/logic for the domain when the parent domain transitions to power collapse/power off state. On some platforms where the parent domains lowest power state itself is Retention, just leaving the GDSC in ON (without any RETAIN_MEM/RETAIN_PERIPH bits being set) will also transition it to Retention. The existing logic handling the PWRSTS_RET seems to set the RETAIN_MEM/RETAIN_PERIPH bits if the cxcs offsets are specified but then explicitly turns the GDSC OFF as part of _gdsc_disable(). Fix that by leaving the GDSC in ON state. Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com> Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220920111517.10407-1-quic_rjendra@quicinc.com
2022-09-27clk: qcom: Add SC8280XP GPU clock controllerBjorn Andersson
Add driver for the GPU clock controller in the Qualcomm SC8280XP platform. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> [bjorn: Included kernel.h and lower-cased hex numbers] Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220926173025.4747-3-quic_bjorande@quicinc.com
2022-09-27dt-bindings: clock: Add Qualcomm SC8280XP GPU bindingBjorn Andersson
Add compatible for the Qualcomm SC8280XP GPU. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220926173025.4747-2-quic_bjorande@quicinc.com
2022-09-27clk: qcom: smd: Add SM6375 clocksKonrad Dybcio
Add support for controlling SMD RPM clocks on SM6375. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220921004458.151842-3-konrad.dybcio@somainline.org
2022-09-27dt-bindings: clock: qcom: rpmcc: Add BIMC_FREQ_LOGKonrad Dybcio
Add the missing definition for the aforementioned clock. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220921004458.151842-2-konrad.dybcio@somainline.org
2022-09-27dt-bindings: clock: qcom,rpmcc: Add compatible for SM6375Konrad Dybcio
Add a compatible for RPMCC on SM6375. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220921004458.151842-1-konrad.dybcio@somainline.org
2022-09-27clk: qcom: rpmhcc: add sdm670 clocksRichard Acayan
The Snapdragon 670 uses the RPMh mailbox for most of the clocks used in SDM845 but omits two. Add clock data for SDM670 so the driver doesn't fail to resolve a clock. Link: https://android.googlesource.com/kernel/msm/+/443bd8d6e2cf54698234c752e6de97b4b8a528bd%5E%21/#F7 Signed-off-by: Richard Acayan <mailingradian@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220920223734.151135-3-mailingradian@gmail.com
2022-09-27dt-bindings: clock: add rpmhcc bindings for sdm670Richard Acayan
The Snapdragon 670 uses the RPMh mailbox for some clocks. Document its support. Signed-off-by: Richard Acayan <mailingradian@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220920223734.151135-2-mailingradian@gmail.com
2022-09-26dt-bindings: clock: qcom,a53pll: replace maintainerKrzysztof Kozlowski
Emails to codeaurora.org bounce ("Recipient address rejected: undeliverable address: No such user here."). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220924081329.15141-1-krzysztof.kozlowski@linaro.org
2022-09-26clk: qcom: Merge alt alpha plls for qcm2260, sm6115Iskren Chernev
The qcom2260 and sm6115 GCC drivers use a common modified DEFAULT and BRAMMO alpha pll offsets. Move these common offsets to the shared place to avoid duplication. The new layouts have a suffix EVO similar to LUCID and RIVIAN. Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220830075620.974009-4-iskren.chernev@gmail.com
2022-09-26clk: qcom: gcc-sm6115: Move alpha pll bramo overridesIskren Chernev
sm6115 uses a modified default and bramo alpha pll offsets. Put them in the same place for consistency. Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220830075620.974009-3-iskren.chernev@gmail.com
2022-09-26clk: qcom: gcc-sm6115: Override default Alpha PLL regsAdam Skladowski
The DEFAULT and BRAMMO PLL offsets are non-standard in downstream, but currently only BRAMMO ones are overridden. Override DEFAULT ones too. A very similar thing is happening in gcc-qcm2290 driver. Fixes: cbe63bfdc54f ("clk: qcom: Add Global Clock controller (GCC) driver for SM6115") Signed-off-by: Adam Skladowski <a_skl39@protonmail.com> Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220830075620.974009-2-iskren.chernev@gmail.com
2022-09-26clk: qcom: Add support for Display Clock Controller on SM8450Dmitry Baryshkov
Add support for the dispcc on Qualcomm SM8450 platform. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220908222850.3552050-4-dmitry.baryshkov@linaro.org
2022-09-26clk: qcom: alpha-pll: add support for power off mode for lucid evo PLLDmitry Baryshkov
PLLs can be kept in standby (default configuration) or in off mode when disabled during power collapse. Hence add support for pll disable off mode for lucid evo PLL. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220908222850.3552050-3-dmitry.baryshkov@linaro.org
2022-09-26dt-bindings: clock: qcom: add bindings for dispcc on SM8450Dmitry Baryshkov
Add device tree bindings for the display clock controller on Qualcomm SM8450 platform. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220908222850.3552050-2-dmitry.baryshkov@linaro.org
2022-09-26clk: qcom: Add display clock controller driver for SM6115Adam Skladowski
Add support for the display clock controller found in SM6115/SM4250 based devices. This clock controller feeds the Multimedia Display SubSystem (MDSS). This driver is based upon one submitted for QCM2290. Signed-off-by: Adam Skladowski <a39.skl@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220911164635.182973-3-a39.skl@gmail.com
2022-09-26dt-bindings: clock: add QCOM SM6115 display clock bindingsAdam Skladowski
Add device tree bindings for display clock controller for Qualcomm Technology Inc's SM6115 SoC. Signed-off-by: Adam Skladowski <a39.skl@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> [bjorn: Minor fix of binding description] Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220911164635.182973-2-a39.skl@gmail.com
2022-09-26clk: qcom: gcc-sc7280: Update the .pwrsts for PCIe GDSCKrishna chaitanya chundru
Enabling PCIe GDSC retention to ensure controller and its dependent clocks won't go down during system suspend. Update the .pwrsts for PCIe GDSC so it only transitions to RET in low power. Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/1663669347-29308-6-git-send-email-quic_krichai@quicinc.com
2022-09-26clk: qcom: lpass: Fix lpass audiocc probeSatya Priya
Change the qcom_cc_probe_by_index() call to qcom_cc_really_probe() to avoid remapping of memory region for index 0, which is already being done through qcom_cc_map(). Fixes: 7c6a6641c2 ("clk: qcom: lpass: Add support for resets & external mclk for SC7280") Signed-off-by: Satya Priya <quic_c_skakit@quicinc.com> Reviewed-by: Neil Armstrong <neil.armstrong@baylibre.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/1663673683-7018-1-git-send-email-quic_c_skakit@quicinc.com
2022-09-26clk: qcom: apss-ipq-pll: add support for IPQ8074Robert Marko
Add support for IPQ8074 since it uses the same PLL setup, however it uses slightly different Alpha PLL config. Alpha PLL config was obtained by dumping PLL registers from a running device. Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220818220628.339366-7-robimarko@gmail.com
2022-09-26clk: qcom: apss-ipq-pll: update IPQ6018 Alpha PLL configRobert Marko
Update the IPQ6018 Alpha PLL config to the latest one from the downstream 5.4 kernel[1]. This one should match the production SoC-s. Tested on IPQ6018 CP01-C1 reference board. [1] https://git.codelinaro.org/clo/qsdk/oss/kernel/linux-ipq-5.4/-/blob/NHSS.QSDK.12.1.r4/drivers/clk/qcom/apss-ipq-pll.c#L41 Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220818220628.339366-6-robimarko@gmail.com
2022-09-26clk: qcom: apss-ipq-pll: use OF match data for Alpha PLL configRobert Marko
Convert the driver to use OF match data for providing the Alpha PLL config per compatible. This is required for IPQ8074 support since it uses a different Alpha PLL config. While we are here rename "ipq_pll_config" to "ipq6018_pll_config" to make it clear that it is for IPQ6018 only. Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220818220628.339366-5-robimarko@gmail.com
2022-09-26dt-bindings: clock: qcom,a53pll: add IPQ8074 compatibleRobert Marko
Add IPQ8074 compatible to A53 PLL bindings. Signed-off-by: Robert Marko <robimarko@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220818220628.339366-4-robimarko@gmail.com
2022-09-26clk: qcom: apss-ipq6018: mark apcs_alias0_core_clk as criticalRobert Marko
While fixing up the driver I noticed that my IPQ8074 board was hanging after CPUFreq switched the frequency during boot, WDT would eventually reset it. So mark apcs_alias0_core_clk as critical since its the clock feeding the CPU cluster and must never be disabled. Fixes: 5e77b4ef1b19 ("clk: qcom: Add ipq6018 apss clock controller") Signed-off-by: Robert Marko <robimarko@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220818220628.339366-3-robimarko@gmail.com
2022-09-26clk: qcom: apss-ipq6018: fix apcs_alias0_clk_srcRobert Marko
While working on IPQ8074 APSS driver it was discovered that IPQ6018 and IPQ8074 use almost the same PLL and APSS clocks, however APSS driver is currently broken. More precisely apcs_alias0_clk_src is broken, it was added as regmap_mux clock. However after debugging why it was always stuck at 800Mhz, it was figured out that its not regmap_mux compatible at all. It is a simple mux but it uses RCG2 register layout and control bits, so utilize the new clk_rcg2_mux_closest_ops to correctly drive it while not having to provide a dummy frequency table. While we are here, use ARRAY_SIZE for number of parents. Tested on IPQ6018-CP01-C1 reference board and multiple IPQ8074 boards. Fixes: 5e77b4ef1b19 ("clk: qcom: Add ipq6018 apss clock controller") Signed-off-by: Robert Marko <robimarko@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220818220628.339366-2-robimarko@gmail.com
2022-09-26clk: qcom: clk-rcg2: add rcg2 mux opsChristian Marangi
An RCG may act as a mux that switch between 2 parents. This is the case on IPQ6018 and IPQ8074 where the APCS core clk that feeds the CPU cluster clock just switches between XO and the PLL that feeds it. Add the required ops to add support for this special configuration and use the generic mux function to determine the rate. This way we dont have to keep a essentially dummy frequency table to use RCG2 as a mux. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Robert Marko <robimarko@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220818220628.339366-1-robimarko@gmail.com
2022-09-26clk: qcom: lcc-ipq806x: use ARRAY_SIZE for num_parentsChristian Marangi
Use ARRAY_SIZE for num_parents instead of raw number to prevent any confusion/mistake. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220724182329.9891-4-ansuelsmth@gmail.com
2022-09-26clk: qcom: lcc-ipq806x: convert to parent dataChristian Marangi
Convert lcc-ipq806x driver to parent_data API. Change parent_name for pll4 to pxo_board to prepare the future to eventually drop the double pxo board clk. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220724182329.9891-3-ansuelsmth@gmail.com
2022-09-26clk: qcom: lcc-ipq806x: add reset definitionChristian Marangi
Add reset definition for lcc-ipq806x. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220724182329.9891-2-ansuelsmth@gmail.com
2022-09-26dt-bindings: clock: add pcm reset for ipq806x lccChristian Marangi
Add pcm reset define for ipq806x lcc. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220724182329.9891-1-ansuelsmth@gmail.com
2022-09-26clk: qcom: cpu-8996: use constant mask for pmuxDmitry Baryshkov
Both pmux instances share the same width and shift. Specify the mask at compile time to simplify functions. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220714100351.1834711-7-dmitry.baryshkov@linaro.org
2022-09-26clk: qcom: cpu-8996: don't store parents in clk_cpu_8996_pmuxDmitry Baryshkov
Don't store pointers to parents in struct clk_cpu_8996_pmux. Instead use clk_hw_get_parent_by_index to fetch them. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220714100351.1834711-6-dmitry.baryshkov@linaro.org
2022-09-26clk: qcom: cpu-8996: move ACD logic to clk_cpu_8996_pmux_determine_rateDmitry Baryshkov
Rather than telling everybody that we are using PLL as a parent (and using ACD clock instead) properly select ACD as a pmux parent clock. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220714100351.1834711-5-dmitry.baryshkov@linaro.org
2022-09-26clk: qcom: cpu-8996: declare ACD clocksDmitry Baryshkov
To simplify the code, define 1:1 fixed factor clocks to represent the ACD pmux parent. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220714100351.1834711-4-dmitry.baryshkov@linaro.org
2022-09-26clk: qcom: cpu-8996: switch to devm_clk_notifier_registerDmitry Baryshkov
Switch to using devres-managed version of clk_notifier_register(). This allows us to drop driver's remove() callback. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220714100351.1834711-3-dmitry.baryshkov@linaro.org
2022-09-26clk: qcom: msm8996-cpu: Use parent_data/_hws for all clocksYassine Oudjana
Replace parent_names in PLLs, secondary muxes and primary muxes with parent_data. For primary muxes there were never any *cl_pll_acd clocks, so instead of adding them, put the primary PLLs in both PLL_INDEX and ACD_INDEX, then make sure ACD_INDEX is always picked over PLL_INDEX when setting parent since we always want ACD when using the primary PLLs. Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com> [DB: switch to parent_hws for pmux clocks] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220714100351.1834711-2-dmitry.baryshkov@linaro.org
2022-09-26dt-bindings: clock: qcom,msm8996-apcc: Fix clocksYassine Oudjana
The clocks currently listed in clocks and clock-names are the ones supplied by this clock controller, not the ones it consumes. Replace them with the only clock it consumes - the on-board oscillator (XO), and make the properties required. Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220621160621.24415-6-y.oudjana@protonmail.com
2022-09-26clk: qcom: msm8996-cpu: Convert secondary muxes to clk_regmap_muxYassine Oudjana
There is nothing special about the secondary muxes, unlike the primary muxes which need some extra logic to handle ACD and switching between primary PLL and secondary mux sources. Turn them into clk_regmap_mux and rename cpu_clk_msm8996_mux into cpu_clk_msm8996_pmux to make it specific to primary muxes. Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220621160621.24415-5-y.oudjana@protonmail.com
2022-09-26clk: qcom: msm8996-cpu: Unify cluster orderYassine Oudjana
The power cluster comes before the performance cluster. Make everything in the driver follow this order. Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220621160621.24415-4-y.oudjana@protonmail.com
2022-09-26clk: qcom: msm8996-cpu: Statically define PLL dividersYassine Oudjana
This will allow for adding them to clk_parent_data arrays in an upcoming patch. Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220621160621.24415-3-y.oudjana@protonmail.com
2022-09-26clk: qcom: msm8996-cpu: Rename DIV_2_INDEX to SMUX_INDEXYassine Oudjana
The parent at this index is the secondary mux, which can connect not only to primary PLL/2 but also to XO. Rename the index to SMUX_INDEX to better reflect the parent. Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220621160621.24415-2-y.oudjana@protonmail.com
2022-09-13clk: qcom: smd-rpm: Add clocks for MSM8909Stephan Gerhold
MSM8909 has mostly the same as clocks in RPM as MSM8916, but additionally the QPIC clock for the NAND flash controller. Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220706134132.3623415-7-stephan.gerhold@kernkonzept.com
2022-09-13dt-bindings: clock: qcom,rpmcc: Add MSM8909Stephan Gerhold
Document the "qcom,rpmcc-msm8909" compatible for the clocks available via the RPM on the MSM8909 SoC. Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220706134132.3623415-6-stephan.gerhold@kernkonzept.com
generated by cgit v1.2.3 (git 2.25.1) at 2025-03-18 08:50:35 +0000