summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-06-14Merge tag 'acpi-6.10-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These fix a recent regression in the ACPI EC driver and make system suspend work on multiple platforms where StorageD3Enable _DSD is missing in the ACPI tables. Specifics: - Make the ACPI EC driver directly evaluate an "orphan" _REG method under the EC device, if present, which stopped being evaluated after the driver had started to install its EC address space handler at the root of the ACPI namespace (Rafael Wysocki) - Make more devices put NVMe storage devices into D3 at suspend to work around missing StorageD3Enable _DSD in the BIOS (Mario Limonciello)" * tag 'acpi-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: EC: Evaluate orphan _REG under EC device ACPI: x86: Force StorageD3Enable on more products
2024-06-14Merge tag 'thermal-6.10-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control fixes from Rafael Wysocki: "These fix three issues introduced recently, two related to defects in ACPI tables supplied by the platform firmware and one cause by a thermal core change that went too far: - Prevent the thermal core from failing the registration of a cooling device if its .get_cur_state() reports an incorrect state to start with which may happen for fans handled through firmware-supplied AML in ACPI tables (Rafael Wysocki) - Make the ACPI thermal zone driver initialize all trip points with temperature of 0 centigrade and below as invalid because such trip point temperatures do not make sense on systems with ACPI thermal control and they cause performance regressions due to permanent thermal mitigations to occur (Rafael Wysocki) - Restore passive polling management in the Step-Wise thermal governor that uses it to ensure that all cooling devices used for thermal mitigation will go back to their initial states eventually (Rafael Wysocki)" * tag 'thermal-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal: gov_step_wise: Restore passive polling management thermal: ACPI: Invalidate trip points with temperature of 0 or below thermal: core: Do not fail cdev registration because of invalid initial state
2024-06-14Merge branch acpi-x86Rafael J. Wysocki
Merge a fix for a suspend issue related to storage handling on multiple systems based on AMD hardware: - Make more devices put NVMe storage devices into D3 at suspend to work around missing StorageD3Enable _DSD in the BIOS (Mario Limonciello). * branch acpi-x86: ACPI: x86: Force StorageD3Enable on more products
2024-06-13Merge tag 'net-6.10-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bluetooth and netfilter. Slim pickings this time, probably a combination of summer, DevConf.cz, and the end of first half of the year at corporations. Current release - regressions: - Revert "igc: fix a log entry using uninitialized netdev", it traded lack of netdev name in a printk() for a crash Previous releases - regressions: - Bluetooth: L2CAP: fix rejecting L2CAP_CONN_PARAM_UPDATE_REQ - geneve: fix incorrectly setting lengths of inner headers in the skb, confusing the drivers and causing mangled packets - sched: initialize noop_qdisc owner to avoid false-positive recursion detection (recursing on CPU 0), which bubbles up to user space as a sendmsg() error, while noop_qdisc should silently drop - netdevsim: fix backwards compatibility in nsim_get_iflink() Previous releases - always broken: - netfilter: ipset: fix race between namespace cleanup and gc in the list:set type" * tag 'net-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits) bnxt_en: Adjust logging of firmware messages in case of released token in __hwrm_send() af_unix: Read with MSG_PEEK loops if the first unread byte is OOB bnxt_en: Cap the size of HWRM_PORT_PHY_QCFG forwarded response gve: Clear napi->skb before dev_kfree_skb_any() ionic: fix use after netif_napi_del() Revert "igc: fix a log entry using uninitialized netdev" net: bridge: mst: fix suspicious rcu usage in br_mst_set_state net: bridge: mst: pass vlan group directly to br_mst_vlan_set_state net/ipv6: Fix the RT cache flush via sysctl using a previous delay net: stmmac: replace priv->speed with the portTransmitRate from the tc-cbs parameters gve: ignore nonrelevant GSO type bits when processing TSO headers net: pse-pd: Use EOPNOTSUPP error code instead of ENOTSUPP netfilter: Use flowlabel flow key when re-routing mangled packets netfilter: ipset: Fix race between namespace cleanup and gc in the list:set type netfilter: nft_inner: validate mandatory meta and payload tcp: use signed arithmetic in tcp_rtx_probe0_timed_out() mailmap: map Geliang's new email address mptcp: pm: update add_addr counters after connect mptcp: pm: inc RmAddr MIB counter once per RM_ADDR ID mptcp: ensure snd_una is properly initialized on connect ...
2024-06-13Merge tag 'nfs-for-6.10-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client fixes from Trond Myklebust: "Bugfixes: - NFSv4.2: Fix a memory leak in nfs4_set_security_label - NFSv2/v3: abort nfs_atomic_open_v23 if the name is too long. - NFS: Add appropriate memory barriers to the sillyrename code - Propagate readlink errors in nfs_symlink_filler - NFS: don't invalidate dentries on transient errors - NFS: fix unnecessary synchronous writes in random write workloads - NFSv4.1: enforce rootpath check when deciding whether or not to trunk Other: - Change email address for Trond Myklebust due to email server concerns" * tag 'nfs-for-6.10-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: add barriers when testing for NFS_FSDATA_BLOCKED SUNRPC: return proper error from gss_wrap_req_priv NFSv4.1 enforce rootpath check in fs_location query NFS: abort nfs_atomic_open_v23 if name is too long. nfs: don't invalidate dentries on transient errors nfs: Avoid flushing many pages with NFS_FILE_SYNC nfs: propagate readlink errors in nfs_symlink_filler MAINTAINERS: Change email address for Trond Myklebust NFSv4: Fix memory leak in nfs4_set_security_label
2024-06-13Merge tag 'fixes-2024-06-13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock Pull memblock fixes from Mike Rapoport: "Fix validation of NUMA coverage. memblock_validate_numa_coverage() was checking for a unset node ID using NUMA_NO_NODE, but x86 used MAX_NUMNODES when no node ID was specified by buggy firmware. Update memblock to substitute MAX_NUMNODES with NUMA_NO_NODE in memblock_set_node() and use NUMA_NO_NODE in x86::numa_init()" * tag 'fixes-2024-06-13' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: x86/mm/numa: Use NUMA_NO_NODE when calling memblock_set_node() memblock: make memblock_set_node() also warn about use of MAX_NUMNODES
2024-06-13bnxt_en: Adjust logging of firmware messages in case of released token in ↵Aleksandr Mishin
__hwrm_send() In case of token is released due to token->state == BNXT_HWRM_DEFERRED, released token (set to NULL) is used in log messages. This issue is expected to be prevented by HWRM_ERR_CODE_PF_UNAVAILABLE error code. But this error code is returned by recent firmware. So some firmware may not return it. This may lead to NULL pointer dereference. Adjust this issue by adding token pointer check. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 8fa4219dba8e ("bnxt_en: add dynamic debug support for HWRM messages") Suggested-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20240611082547.12178-1-amishin@t-argos.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-13af_unix: Read with MSG_PEEK loops if the first unread byte is OOBRao Shoaib
Read with MSG_PEEK flag loops if the first byte to read is an OOB byte. commit 22dd70eb2c3d ("af_unix: Don't peek OOB data without MSG_OOB.") addresses the loop issue but does not address the issue that no data beyond OOB byte can be read. >>> from socket import * >>> c1, c2 = socketpair(AF_UNIX, SOCK_STREAM) >>> c1.send(b'a', MSG_OOB) 1 >>> c1.send(b'b') 1 >>> c2.recv(1, MSG_PEEK | MSG_DONTWAIT) b'b' >>> from socket import * >>> c1, c2 = socketpair(AF_UNIX, SOCK_STREAM) >>> c2.setsockopt(SOL_SOCKET, SO_OOBINLINE, 1) >>> c1.send(b'a', MSG_OOB) 1 >>> c1.send(b'b') 1 >>> c2.recv(1, MSG_PEEK | MSG_DONTWAIT) b'a' >>> c2.recv(1, MSG_PEEK | MSG_DONTWAIT) b'a' >>> c2.recv(1, MSG_DONTWAIT) b'a' >>> c2.recv(1, MSG_PEEK | MSG_DONTWAIT) b'b' >>> Fixes: 314001f0bf92 ("af_unix: Add OOB support") Signed-off-by: Rao Shoaib <Rao.Shoaib@oracle.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20240611084639.2248934-1-Rao.Shoaib@oracle.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-13bnxt_en: Cap the size of HWRM_PORT_PHY_QCFG forwarded responseMichael Chan
Firmware interface 1.10.2.118 has increased the size of HWRM_PORT_PHY_QCFG response beyond the maximum size that can be forwarded. When the VF's link state is not the default auto state, the PF will need to forward the response back to the VF to indicate the forced state. This regression may cause the VF to fail to initialize. Fix it by capping the HWRM_PORT_PHY_QCFG response to the maximum 96 bytes. The SPEEDS2_SUPPORTED flag needs to be cleared because the new speeds2 fields are beyond the legacy structure. Also modify bnxt_hwrm_fwd_resp() to print a warning if the message size exceeds 96 bytes to make this failure more obvious. Fixes: 84a911db8305 ("bnxt_en: Update firmware interface to 1.10.2.118") Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20240612231736.57823-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-13gve: Clear napi->skb before dev_kfree_skb_any()Ziwei Xiao
gve_rx_free_skb incorrectly leaves napi->skb referencing an skb after it is freed with dev_kfree_skb_any(). This can result in a subsequent call to napi_get_frags returning a dangling pointer. Fix this by clearing napi->skb before the skb is freed. Fixes: 9b8dd5e5ea48 ("gve: DQO: Add RX path") Cc: stable@vger.kernel.org Reported-by: Shailend Chand <shailend@google.com> Signed-off-by: Ziwei Xiao <ziweixiao@google.com> Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com> Reviewed-by: Shailend Chand <shailend@google.com> Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com> Link: https://lore.kernel.org/r/20240612001654.923887-1-ziweixiao@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-13ionic: fix use after netif_napi_del()Taehee Yoo
When queues are started, netif_napi_add() and napi_enable() are called. If there are 4 queues and only 3 queues are used for the current configuration, only 3 queues' napi should be registered and enabled. The ionic_qcq_enable() checks whether the .poll pointer is not NULL for enabling only the using queue' napi. Unused queues' napi will not be registered by netif_napi_add(), so the .poll pointer indicates NULL. But it couldn't distinguish whether the napi was unregistered or not because netif_napi_del() doesn't reset the .poll pointer to NULL. So, ionic_qcq_enable() calls napi_enable() for the queue, which was unregistered by netif_napi_del(). Reproducer: ethtool -L <interface name> rx 1 tx 1 combined 0 ethtool -L <interface name> rx 0 tx 0 combined 1 ethtool -L <interface name> rx 0 tx 0 combined 4 Splat looks like: kernel BUG at net/core/dev.c:6666! Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 PID: 1057 Comm: kworker/3:3 Not tainted 6.10.0-rc2+ #16 Workqueue: events ionic_lif_deferred_work [ionic] RIP: 0010:napi_enable+0x3b/0x40 Code: 48 89 c2 48 83 e2 f6 80 b9 61 09 00 00 00 74 0d 48 83 bf 60 01 00 00 00 74 03 80 ce 01 f0 4f RSP: 0018:ffffb6ed83227d48 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff97560cda0828 RCX: 0000000000000029 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff97560cda0a28 RBP: ffffb6ed83227d50 R08: 0000000000000400 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000 R13: ffff97560ce3c1a0 R14: 0000000000000000 R15: ffff975613ba0a20 FS: 0000000000000000(0000) GS:ffff975d5f780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8f734ee200 CR3: 0000000103e50000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <TASK> ? die+0x33/0x90 ? do_trap+0xd9/0x100 ? napi_enable+0x3b/0x40 ? do_error_trap+0x83/0xb0 ? napi_enable+0x3b/0x40 ? napi_enable+0x3b/0x40 ? exc_invalid_op+0x4e/0x70 ? napi_enable+0x3b/0x40 ? asm_exc_invalid_op+0x16/0x20 ? napi_enable+0x3b/0x40 ionic_qcq_enable+0xb7/0x180 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] ionic_start_queues+0xc4/0x290 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] ionic_link_status_check+0x11c/0x170 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] ionic_lif_deferred_work+0x129/0x280 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] process_one_work+0x145/0x360 worker_thread+0x2bb/0x3d0 ? __pfx_worker_thread+0x10/0x10 kthread+0xcc/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2d/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20240612060446.1754392-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-13Revert "igc: fix a log entry using uninitialized netdev"Sasha Neftin
This reverts commit 86167183a17e03ec77198897975e9fdfbd53cb0b. igc_ptp_init() needs to be called before igc_reset(), otherwise kernel crash could be observed. Following the corresponding discussion [1] and [2] revert this commit. Link: https://lore.kernel.org/all/8fb634f8-7330-4cf4-a8ce-485af9c0a61a@intel.com/ [1] Link: https://lore.kernel.org/all/87o78rmkhu.fsf@intel.com/ [2] Fixes: 86167183a17e ("igc: fix a log entry using uninitialized netdev") Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240611162456.961631-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-13ACPI: EC: Evaluate orphan _REG under EC deviceRafael J. Wysocki
After starting to install the EC address space handler at the ACPI namespace root, if there is an "orphan" _REG method in the EC device's scope, it will not be evaluated any more. This breaks EC operation regions on some systems, like Asus gu605. To address this, use a wrapper around an existing ACPICA function to look for an "orphan" _REG method in the EC device scope and evaluate it if present. Fixes: 60fa6ae6e6d0 ("ACPI: EC: Install address space handler at the namespace root") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218945 Reported-by: VitaliiT <vitaly.torshyn@gmail.com> Tested-by: VitaliiT <vitaly.torshyn@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-06-12Merge branch 'net-bridge-mst-fix-suspicious-rcu-usage-warning'Jakub Kicinski
Nikolay Aleksandrov says: ==================== net: bridge: mst: fix suspicious rcu usage warning This set fixes a suspicious RCU usage warning triggered by syzbot[1] in the bridge's MST code. After I converted br_mst_set_state to RCU, I forgot to update the vlan group dereference helper. Fix it by using the proper helper, in order to do that we need to pass the vlan group which is already obtained correctly by the callers for their respective context. Patch 01 is a requirement for the fix in patch 02. Note I did consider rcu_dereference_rtnl() but the churn is much bigger and in every part of the bridge. We can do that as a cleanup in net-next. [1] https://syzkaller.appspot.com/bug?extid=9bbe2de1bc9d470eb5fe ============================= WARNING: suspicious RCU usage 6.10.0-rc2-syzkaller-00235-g8a92980606e3 #0 Not tainted ----------------------------- net/bridge/br_private.h:1599 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 4 locks held by syz-executor.1/5374: #0: ffff888022d50b18 (&mm->mmap_lock){++++}-{3:3}, at: mmap_read_lock include/linux/mmap_lock.h:144 [inline] #0: ffff888022d50b18 (&mm->mmap_lock){++++}-{3:3}, at: __mm_populate+0x1b0/0x460 mm/gup.c:2111 #1: ffffc90000a18c00 ((&p->forward_delay_timer)){+.-.}-{0:0}, at: call_timer_fn+0xc0/0x650 kernel/time/timer.c:1789 #2: ffff88805fb2ccb8 (&br->lock){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] #2: ffff88805fb2ccb8 (&br->lock){+.-.}-{2:2}, at: br_forward_delay_timer_expired+0x50/0x440 net/bridge/br_stp_timer.c:86 #3: ffffffff8e333fa0 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:329 [inline] #3: ffffffff8e333fa0 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:781 [inline] #3: ffffffff8e333fa0 (rcu_read_lock){....}-{1:2}, at: br_mst_set_state+0x171/0x7a0 net/bridge/br_mst.c:105 stack backtrace: CPU: 1 PID: 5374 Comm: syz-executor.1 Not tainted 6.10.0-rc2-syzkaller-00235-g8a92980606e3 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 lockdep_rcu_suspicious+0x221/0x340 kernel/locking/lockdep.c:6712 nbp_vlan_group net/bridge/br_private.h:1599 [inline] br_mst_set_state+0x29e/0x7a0 net/bridge/br_mst.c:106 br_set_state+0x28a/0x7b0 net/bridge/br_stp.c:47 br_forward_delay_timer_expired+0x176/0x440 net/bridge/br_stp_timer.c:88 call_timer_fn+0x18e/0x650 kernel/time/timer.c:1792 expire_timers kernel/time/timer.c:1843 [inline] __run_timers kernel/time/timer.c:2417 [inline] __run_timer_base+0x66a/0x8e0 kernel/time/timer.c:2428 run_timer_base kernel/time/timer.c:2437 [inline] run_timer_softirq+0xb7/0x170 kernel/time/timer.c:2447 handle_softirqs+0x2c4/0x970 kernel/softirq.c:554 __do_softirq kernel/softirq.c:588 [inline] invoke_softirq kernel/softirq.c:428 [inline] __irq_exit_rcu+0xf4/0x1c0 kernel/softirq.c:637 irq_exit_rcu+0x9/0x30 kernel/softirq.c:649 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1043 [inline] sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1043 </IRQ> <TASK> ==================== Link: https://lore.kernel.org/r/20240609103654.914987-1-razor@blackwall.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-12net: bridge: mst: fix suspicious rcu usage in br_mst_set_stateNikolay Aleksandrov
I converted br_mst_set_state to RCU to avoid a vlan use-after-free but forgot to change the vlan group dereference helper. Switch to vlan group RCU deref helper to fix the suspicious rcu usage warning. Fixes: 3a7c1661ae13 ("net: bridge: mst: fix vlan use-after-free") Reported-by: syzbot+9bbe2de1bc9d470eb5fe@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=9bbe2de1bc9d470eb5fe Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20240609103654.914987-3-razor@blackwall.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-12net: bridge: mst: pass vlan group directly to br_mst_vlan_set_stateNikolay Aleksandrov
Pass the already obtained vlan group pointer to br_mst_vlan_set_state() instead of dereferencing it again. Each caller has already correctly dereferenced it for their context. This change is required for the following suspicious RCU dereference fix. No functional changes intended. Fixes: 3a7c1661ae13 ("net: bridge: mst: fix vlan use-after-free") Reported-by: syzbot+9bbe2de1bc9d470eb5fe@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=9bbe2de1bc9d470eb5fe Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20240609103654.914987-2-razor@blackwall.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-12net/ipv6: Fix the RT cache flush via sysctl using a previous delayPetr Pavlu
The net.ipv6.route.flush system parameter takes a value which specifies a delay used during the flush operation for aging exception routes. The written value is however not used in the currently requested flush and instead utilized only in the next one. A problem is that ipv6_sysctl_rtcache_flush() first reads the old value of net->ipv6.sysctl.flush_delay into a local delay variable and then calls proc_dointvec() which actually updates the sysctl based on the provided input. Fix the problem by switching the order of the two operations. Fixes: 4990509f19e8 ("[NETNS][IPV6]: Make sysctls route per namespace.") Signed-off-by: Petr Pavlu <petr.pavlu@suse.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240607112828.30285-1-petr.pavlu@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-12Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linuxLinus Torvalds
Pull ARM and clkdev fixes from Russell King: - Fix clkdev - erroring out on long strings causes boot failures, so don't do this. Still warn about the over-sized strings (which will never match and thus their registration with clkdev is useless) - Fix for ftrace with frame pointer unwinder with recent GCC changing the way frames are stacked. * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux: ARM: 9405/1: ftrace: Don't assume stack frames are contiguous in memory clkdev: don't fail clkdev_alloc() if over-sized
2024-06-12Merge tag 'nf-24-06-11' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Patch #1 fixes insufficient sanitization of netlink attributes for the inner expression which can trigger nul-pointer dereference, from Davide Ornaghi. Patch #2 address a report that there is a race condition between namespace cleanup and the garbage collection of the list:set type. This patch resolves this issue with other minor issues as well, from Jozsef Kadlecsik. Patch #3 ip6_route_me_harder() ignores flowlabel/dsfield when ip dscp has been mangled, this unbreaks ip6 dscp set $v, from Florian Westphal. All of these patches address issues that are present in several releases. * tag 'nf-24-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: Use flowlabel flow key when re-routing mangled packets netfilter: ipset: Fix race between namespace cleanup and gc in the list:set type netfilter: nft_inner: validate mandatory meta and payload ==================== Link: https://lore.kernel.org/r/20240611220323.413713-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-12Merge tag 'bcachefs-2024-06-12' of https://evilpiepirate.org/git/bcachefsLinus Torvalds
Pull bcachefs fixes from Kent Overstreet: - fix kworker explosion, due to calling submit_bio() (which can block) from a multithreaded workqueue - fix error handling in btree node scan - forward compat fix: kill an old debug assert - key cache shrinker fixes This is a partial fix for stalls doing multithreaded creates - there were various O(n^2) issues the key cache shrinker was hitting [1]. There's more work coming here; I'm working on a patch to delete the key cache lock, which initial testing shows to be a pretty drastic performance improvement - assorted syzbot fixes Link: https://lore.kernel.org/linux-bcachefs/CAGudoHGenxzk0ZqPXXi1_QDbfqQhGHu+wUwzyS6WmfkUZ1HiXA@mail.gmail.com/ [1] * tag 'bcachefs-2024-06-12' of https://evilpiepirate.org/git/bcachefs: bcachefs: Fix rcu_read_lock() leak in drop_extra_replicas bcachefs: Add missing bch_inode_info.ei_flags init bcachefs: Add missing synchronize_srcu_expedited() call when shutting down bcachefs: Check for invalid bucket from bucket_gen(), gc_bucket() bcachefs: Replace bucket_valid() asserts in bucket lookup with proper checks bcachefs: Fix snapshot_create_lock lock ordering bcachefs: Fix refcount leak in check_fix_ptrs() bcachefs: Leave a buffer in the btree key cache to avoid lock thrashing bcachefs: Fix reporting of freed objects from key cache shrinker bcachefs: set sb->s_shrinker->seeks = 0 bcachefs: increase key cache shrinker batch size bcachefs: Enable automatic shrinking for rhashtables bcachefs: fix the display format for show-super bcachefs: fix stack frame size in fsck.c bcachefs: Delete incorrect BTREE_ID_NR assertion bcachefs: Fix incorrect error handling found_btree_node_is_readable() bcachefs: Split out btree_write_submit_wq
2024-06-12mailmap: Add my outdated addresses to the map fileAndy Shevchenko
There is a couple of outdated addresses that are still visible in the Git history, add them to .mailmap. While at it, replace one in the comment. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-06-11net: stmmac: replace priv->speed with the portTransmitRate from the tc-cbs ↵Xiaolei Wang
parameters The current cbs parameter depends on speed after uplinking, which is not needed and will report a configuration error if the port is not initially connected. The UAPI exposed by tc-cbs requires userspace to recalculate the send slope anyway, because the formula depends on port_transmit_rate (see man tc-cbs), which is not an invariant from tc's perspective. Therefore, we use offload->sendslope and offload->idleslope to derive the original port_transmit_rate from the CBS formula. Fixes: 1f705bc61aee ("net: stmmac: Add support for CBS QDISC") Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20240608143524.2065736-1-xiaolei.wang@windriver.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-11gve: ignore nonrelevant GSO type bits when processing TSO headersJoshua Washington
TSO currently fails when the skb's gso_type field has more than one bit set. TSO packets can be passed from userspace using PF_PACKET, TUNTAP and a few others, using virtio_net_hdr (e.g., PACKET_VNET_HDR). This includes virtualization, such as QEMU, a real use-case. The gso_type and gso_size fields as passed from userspace in virtio_net_hdr are not trusted blindly by the kernel. It adds gso_type |= SKB_GSO_DODGY to force the packet to enter the software GSO stack for verification. This issue might similarly come up when the CWR bit is set in the TCP header for congestion control, causing the SKB_GSO_TCP_ECN gso_type bit to be set. Fixes: a57e5de476be ("gve: DQO: Add TX path") Signed-off-by: Joshua Washington <joshwash@google.com> Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com> Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Suggested-by: Eric Dumazet <edumazet@google.com> Acked-by: Andrei Vagin <avagin@gmail.com> v2 - Remove unnecessary comments, remove line break between fixes tag and signoffs. v3 - Add back unrelated empty line removal. Link: https://lore.kernel.org/r/20240610225729.2985343-1-joshwash@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-11Merge tag 'for-net-2024-06-10' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - hci_sync: fix not using correct handle - L2CAP: fix rejecting L2CAP_CONN_PARAM_UPDATE_REQ - L2CAP: fix connection setup in l2cap_connect * tag 'for-net-2024-06-10' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: fix connection setup in l2cap_connect Bluetooth: L2CAP: Fix rejecting L2CAP_CONN_PARAM_UPDATE_REQ Bluetooth: hci_sync: Fix not using correct handle ==================== Link: https://lore.kernel.org/r/20240610135803.920662-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-11net: pse-pd: Use EOPNOTSUPP error code instead of ENOTSUPPKory Maincent
ENOTSUPP is not a SUSV4 error code, prefer EOPNOTSUPP as reported by checkpatch script. Fixes: 18ff0bcda6d1 ("ethtool: add interface to interact with Ethernet Power Equipment") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Link: https://lore.kernel.org/r/20240610083426.740660-1-kory.maincent@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-11bcachefs: Fix rcu_read_lock() leak in drop_extra_replicasKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-06-11Merge tag 'vfs-6.10-rc4.fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull vfs fixes from Christian Brauner: "Misc: - Restore debugfs behavior of ignoring unknown mount options - Fix kernel doc for netfs_wait_for_oustanding_io() - Fix struct statx comment after new addition for this cycle - Fix a check in find_next_fd() iomap: - Fix data zeroing behavior when an extent spans the block that contains i_size - Restore i_size increasing in iomap_write_end() for now to avoid stale data exposure on xfs with a realtime device Cachefiles: - Remove unneeded fdtable.h include - Improve trace output for cachefiles_obj_{get,put}_ondemand_fd() - Remove requests from the request list to prevent accessing already freed requests - Fix UAF when issuing restore command while the daemon is still alive by adding an additional reference count to requests - Fix UAF by grabbing a reference during xarray lookup with xa_lock() held - Simplify error handling in cachefiles_ondemand_daemon_read() - Add consistency checks read and open requests to avoid crashes - Add a spinlock to protect ondemand_id variable which is used to determine whether an anonymous cachefiles fd has already been closed - Make on-demand reads killable allowing to handle broken cachefiles daemon better - Flush all requests after the kernel has been marked dead via CACHEFILES_DEAD to avoid hung-tasks - Ensure that closed requests are marked as such to avoid reusing them with a reopen request - Defer fd_install() until after copy_to_user() succeeded and thereby get rid of having to use close_fd() - Ensure that anonymous cachefiles on-demand fds are reused while they are valid to avoid pinning already freed cookies" * tag 'vfs-6.10-rc4.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: iomap: Fix iomap_adjust_read_range for plen calculation iomap: keep on increasing i_size in iomap_write_end() cachefiles: remove unneeded include of <linux/fdtable.h> fs/file: fix the check in find_next_fd() cachefiles: make on-demand read killable cachefiles: flush all requests after setting CACHEFILES_DEAD cachefiles: Set object to close if ondemand_id < 0 in copen cachefiles: defer exposing anon_fd until after copy_to_user() succeeds cachefiles: never get a new anonymous fd if ondemand_id is valid cachefiles: add spin_lock for cachefiles_ondemand_info cachefiles: add consistency check for copen/cread cachefiles: remove err_put_fd label in cachefiles_ondemand_daemon_read() cachefiles: fix slab-use-after-free in cachefiles_ondemand_daemon_read() cachefiles: fix slab-use-after-free in cachefiles_ondemand_get_fd() cachefiles: remove requests from xarray during flushing requests cachefiles: add output string to cachefiles_obj_[get|put]_ondemand_fd statx: Update offset commentary for struct statx netfs: fix kernel doc for nets_wait_for_outstanding_io() debugfs: continue to ignore unknown mount options
2024-06-11thermal: gov_step_wise: Restore passive polling managementRafael J. Wysocki
Consider a thermal zone with one passive trip point, a cooling device with 3 states (0, 1, 2) bound to it, passive polling enabled (nonzero passive_delay_jiffies) and no regular polling (polling_delay_jiffies equal to 0) that is managed by the Step-Wise governor. Suppose that the initial state of the cooling device is 0 and the zone temperature is below the trip point to start with. When the trip point is crossed, tz->passive is incremented by the thermal core and the governor's .manage() callback is invoked. It sets 'throttle' to 'true' for the trip in question and get_target_state() returns 1 for the instance corresponding to the cooling device (say that 'upper' and 'lower' are set to 2 and 0 for it, respectively), so its state changes to 1. Passive polling is still active for the zone, so next time the temperature is updated, the governor's .manage() callback will be invoked again. If the temperature is still rising, it will change the state of the cooling device to 2. Now suppose that next time the zone temperature is updated, it falls below the trip point, so tz->passive is decremented for the zone (say it becomes 0 then) and the governor's .manage() callbacks runs. It finds that the temperature trend for the zone is 'falling' and 'throttle' will be set to 'false' for the trip in question, so the cooling device's state will be changed to 1. However, because tz->polling is 0 for the zone, the governor's .manage() callback may not be invoked again for a long time and the cooling device's state will not be reset back to 0. This can happen because commit 042a3d80f118 ("thermal: core: Move passive polling management to the core") removed passive polling management from the Step-Wise governor. Before that change, thermal_zone_trip_update() would bump up tz->passive when changing the target state for a thermal instance from "no target" to a specific value and it would drop tz->passive when changing it back to "no target" which would cause passive polling to be active for the zone until the governor has reset the states of all cooling devices. In particular, in the example above tz->passive would be incremented when changing the state of the cooling device from 0 to 1 and then it would be still nonzero when the state of the cooling device was changed from 2 to 1. To prevent this problem from occurring, restore the passive polling management in the Step-Wise governor by partially reverting the commit in question and update the comment in the restored code to explain its role more clearly. Fixes: 042a3d80f118 ("thermal: core: Move passive polling management to the core") Closes: https://lore.kernel.org/linux-pm/ZmVfcEOxmjUHZTSX@hovoldconsulting.com Reported-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-06-11netfilter: Use flowlabel flow key when re-routing mangled packetsFlorian Westphal
'ip6 dscp set $v' in an nftables outpute route chain has no effect. While nftables does detect the dscp change and calls the reroute hook. But ip6_route_me_harder never sets the dscp/flowlabel: flowlabel/dsfield routing rules are ignored and no reroute takes place. Thanks to Yi Chen for an excellent reproducer script that I used to validate this change. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Yi Chen <yiche@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-06-11netfilter: ipset: Fix race between namespace cleanup and gc in the list:set typeJozsef Kadlecsik
Lion Ackermann reported that there is a race condition between namespace cleanup in ipset and the garbage collection of the list:set type. The namespace cleanup can destroy the list:set type of sets while the gc of the set type is waiting to run in rcu cleanup. The latter uses data from the destroyed set which thus leads use after free. The patch contains the following parts: - When destroying all sets, first remove the garbage collectors, then wait if needed and then destroy the sets. - Fix the badly ordered "wait then remove gc" for the destroy a single set case. - Fix the missing rcu locking in the list:set type in the userspace test case. - Use proper RCU list handlings in the list:set type. The patch depends on c1193d9bbbd3 (netfilter: ipset: Add list flush to cancel_gc). Fixes: 97f7cf1cd80e (netfilter: ipset: fix performance regression in swap operation) Reported-by: Lion Ackermann <nnamrec@gmail.com> Tested-by: Lion Ackermann <nnamrec@gmail.com> Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-06-11netfilter: nft_inner: validate mandatory meta and payloadDavide Ornaghi
Check for mandatory netlink attributes in payload and meta expression when used embedded from the inner expression, otherwise NULL pointer dereference is possible from userspace. Fixes: a150d122b6bd ("netfilter: nft_meta: add inner match support") Fixes: 3a07327d10a0 ("netfilter: nft_inner: support for inner tunnel header matching") Signed-off-by: Davide Ornaghi <d.ornaghi97@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-06-10tcp: use signed arithmetic in tcp_rtx_probe0_timed_out()Eric Dumazet
Due to timer wheel implementation, a timer will usually fire after its schedule. For instance, for HZ=1000, a timeout between 512ms and 4s has a granularity of 64ms. For this range of values, the extra delay could be up to 63ms. For TCP, this means that tp->rcv_tstamp may be after inet_csk(sk)->icsk_timeout whenever the timer interrupt finally triggers, if one packet came during the extra delay. We need to make sure tcp_rtx_probe0_timed_out() handles this case. Fixes: e89688e3e978 ("net: tcp: fix unexcepted socket die when snd_wnd is 0") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Menglong Dong <imagedong@tencent.com> Acked-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Link: https://lore.kernel.org/r/20240607125652.1472540-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-10Merge branch 'mptcp-various-fixes'Jakub Kicinski
Matthieu Baerts says: ==================== mptcp: various fixes The different patches here are some unrelated fixes for MPTCP: - Patch 1 ensures 'snd_una' is initialised on connect in case of MPTCP fallback to TCP followed by retransmissions before the processing of any other incoming packets. A fix for v5.9+. - Patch 2 makes sure the RmAddr MIB counter is incremented, and only once per ID, upon the reception of a RM_ADDR. A fix for v5.10+. - Patch 3 doesn't update 'add addr' related counters if the connect() was not possible. A fix for v5.7+. - Patch 4 updates the mailmap file to add Geliang's new email address. ==================== Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-0-1ab9ddfa3d00@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-10mailmap: map Geliang's new email addressGeliang Tang
Just like my other email addresses, map my new one to kernel.org account too. My new email address uses "last name, first name" format, which is different from my other email addresses. This mailmap is also used to indicate that it is actually the same person. Suggested-by: Mat Martineau <martineau@kernel.org> Suggested-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: Geliang Tang <geliang@kernel.org> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-4-1ab9ddfa3d00@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-10mptcp: pm: update add_addr counters after connectYonglongLi
The creation of new subflows can fail for different reasons. If no subflow have been created using the received ADD_ADDR, the related counters should not be updated, otherwise they will never be decremented for events related to this ID later on. For the moment, the number of accepted ADD_ADDR is only decremented upon the reception of a related RM_ADDR, and only if the remote address ID is currently being used by at least one subflow. In other words, if no subflow can be created with the received address, the counter will not be decremented. In this case, it is then important not to increment pm.add_addr_accepted counter, and not to modify pm.accept_addr bit. Note that this patch does not modify the behaviour in case of failures later on, e.g. if the MP Join is dropped or rejected. The "remove invalid addresses" MP Join subtest has been modified to validate this case. The broadcast IP address is added before the "valid" address that will be used to successfully create a subflow, and the limit is decreased by one: without this patch, it was not possible to create the last subflow, because: - the broadcast address would have been accepted even if it was not usable: the creation of a subflow to this address results in an error, - the limit of 2 accepted ADD_ADDR would have then been reached. Fixes: 01cacb00b35c ("mptcp: add netlink-based PM") Cc: stable@vger.kernel.org Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: YonglongLi <liyonglong@chinatelecom.cn> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-3-1ab9ddfa3d00@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-10mptcp: pm: inc RmAddr MIB counter once per RM_ADDR IDYonglongLi
The RmAddr MIB counter is supposed to be incremented once when a valid RM_ADDR has been received. Before this patch, it could have been incremented as many times as the number of subflows connected to the linked address ID, so it could have been 0, 1 or more than 1. The "RmSubflow" is incremented after a local operation. In this case, it is normal to tied it with the number of subflows that have been actually removed. The "remove invalid addresses" MP Join subtest has been modified to validate this case. A broadcast IP address is now used instead: the client will not be able to create a subflow to this address. The consequence is that when receiving the RM_ADDR with the ID attached to this broadcast IP address, no subflow linked to this ID will be found. Fixes: 7a7e52e38a40 ("mptcp: add RM_ADDR related mibs") Cc: stable@vger.kernel.org Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: YonglongLi <liyonglong@chinatelecom.cn> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-2-1ab9ddfa3d00@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-10mptcp: ensure snd_una is properly initialized on connectPaolo Abeni
This is strictly related to commit fb7a0d334894 ("mptcp: ensure snd_nxt is properly initialized on connect"). It turns out that syzkaller can trigger the retransmit after fallback and before processing any other incoming packet - so that snd_una is still left uninitialized. Address the issue explicitly initializing snd_una together with snd_nxt and write_seq. Suggested-by: Mat Martineau <martineau@kernel.org> Fixes: 8fd738049ac3 ("mptcp: fallback in case of simultaneous connect") Cc: stable@vger.kernel.org Reported-by: Christoph Paasch <cpaasch@apple.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/485 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-1-1ab9ddfa3d00@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-10net/sched: initialize noop_qdisc ownerJohannes Berg
When the noop_qdisc owner isn't initialized, then it will be 0, so packets will erroneously be regarded as having been subject to recursion as long as only CPU 0 queues them. For non-SMP, that's all packets, of course. This causes a change in what's reported to userspace, normally noop_qdisc would drop packets silently, but with this change the syscall returns -ENOBUFS if RECVERR is also set on the socket. Fix this by initializing the owner field to -1, just like it would be for dynamically allocated qdiscs by qdisc_alloc(). Fixes: 0f022d32c3ec ("net/sched: Fix mirred deadlock on device recursion") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240607175340.786bfb938803.I493bf8422e36be4454c08880a8d3703cea8e421a@changeid Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-10bcachefs: Add missing bch_inode_info.ei_flags initKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-06-10bcachefs: Add missing synchronize_srcu_expedited() call when shutting downKent Overstreet
We use the polling interface to srcu for tracking pending frees; when shutting down we don't need to wait for an srcu barrier to free them, but SRCU still gets confused if we shutdown with an outstanding grace period. Reported-by: syzbot+6a038377f0a594d7d44e@syzkaller.appspotmail.com Reported-by: syzbot+0ece6edfd05ed20e32d9@syzkaller.appspotmail.com Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-06-10bcachefs: Check for invalid bucket from bucket_gen(), gc_bucket()Kent Overstreet
Turn more asserts into proper recoverable error paths. Reported-by: syzbot+246b47da27f8e7e7d6fb@syzkaller.appspotmail.com Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-06-10bcachefs: Replace bucket_valid() asserts in bucket lookup with proper checksKent Overstreet
The bucket_gens array and gc_buckets array known their own size; we should be using those members, and returning an error. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-06-10bcachefs: Fix snapshot_create_lock lock orderingKent Overstreet
====================================================== WARNING: possible circular locking dependency detected 6.10.0-rc2-ktest-00018-gebd1d148b278 #144 Not tainted ------------------------------------------------------ fio/1345 is trying to acquire lock: ffff88813e200ab8 (&c->snapshot_create_lock){++++}-{3:3}, at: bch2_truncate+0x76/0xf0 but task is already holding lock: ffff888105a1fa38 (&sb->s_type->i_mutex_key#13){+.+.}-{3:3}, at: do_truncate+0x7b/0xc0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&sb->s_type->i_mutex_key#13){+.+.}-{3:3}: down_write+0x3d/0xd0 bch2_write_iter+0x1c0/0x10f0 vfs_write+0x24a/0x560 __x64_sys_pwrite64+0x77/0xb0 x64_sys_call+0x17e5/0x1ab0 do_syscall_64+0x68/0x130 entry_SYSCALL_64_after_hwframe+0x4b/0x53 -> #1 (sb_writers#10){.+.+}-{0:0}: mnt_want_write+0x4a/0x1d0 filename_create+0x69/0x1a0 user_path_create+0x38/0x50 bch2_fs_file_ioctl+0x315/0xbf0 __x64_sys_ioctl+0x297/0xaf0 x64_sys_call+0x10cb/0x1ab0 do_syscall_64+0x68/0x130 entry_SYSCALL_64_after_hwframe+0x4b/0x53 -> #0 (&c->snapshot_create_lock){++++}-{3:3}: __lock_acquire+0x1445/0x25b0 lock_acquire+0xbd/0x2b0 down_read+0x40/0x180 bch2_truncate+0x76/0xf0 bchfs_truncate+0x240/0x3f0 bch2_setattr+0x7b/0xb0 notify_change+0x322/0x4b0 do_truncate+0x8b/0xc0 do_ftruncate+0x110/0x270 __x64_sys_ftruncate+0x43/0x80 x64_sys_call+0x1373/0x1ab0 do_syscall_64+0x68/0x130 entry_SYSCALL_64_after_hwframe+0x4b/0x53 other info that might help us debug this: Chain exists of: &c->snapshot_create_lock --> sb_writers#10 --> &sb->s_type->i_mutex_key#13 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&sb->s_type->i_mutex_key#13); lock(sb_writers#10); lock(&sb->s_type->i_mutex_key#13); rlock(&c->snapshot_create_lock); *** DEADLOCK *** Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-06-10bcachefs: Fix refcount leak in check_fix_ptrs()Kent Overstreet
fsck_err() does a goto fsck_err on error; factor out check_fix_ptr() so that our error label can drop our device ref. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-06-10bcachefs: Leave a buffer in the btree key cache to avoid lock thrashingKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-06-10bcachefs: Fix reporting of freed objects from key cache shrinkerKent Overstreet
We count objects as freed when we move them to the srcu-pending lists because we're doing the equivalent of a kfree_srcu(); the only difference is managing the pending list ourself means we can allocate from the pending list. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-06-10bcachefs: set sb->s_shrinker->seeks = 0Kent Overstreet
inodes and dentries are still present in the btree node cache, in much more compact form Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-06-10bcachefs: increase key cache shrinker batch sizeKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-06-10bcachefs: Enable automatic shrinking for rhashtablesKent Overstreet
Since the key cache shrinker walks the rhashtable, a mostly empty rhashtable leads to really nasty reclaim performance issues. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-06-10bcachefs: fix the display format for show-superHongbo Li
There are three keys displayed in non-uniform format. Let's fix them. [Before] ``` Label: testbcachefs Version: 1.9: (unknown version) Version upgrade complete: 0.0: (unknown version) ``` [After] ``` Label: testbcachefs Version: 1.9: (unknown version) Version upgrade complete: 0.0: (unknown version) ``` Fixes: 7423330e30ab ("bcachefs: prt_printf() now respects \r\n\t") Signed-off-by: Hongbo Li <lihongbo22@huawei.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
generated by cgit v1.2.3 (git 2.25.1) at 2025-03-01 04:52:34 +0000