summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-11-08drm/amdgpu: Add sysfs interface for sdma reset maskJesse.zhang@amd.com
Add the sysfs interface for sdma: sdma_reset_mask The interface is read-only and show the resets supported by the IP. For example, full adapter reset (mode1/mode2/BACO/etc), soft reset, queue reset, and pipe reset. V2: the sysfs node returns a text string instead of some flags (Christian) v3: add a generic helper which takes the ring as parameter and print the strings in the order they are applied (Christian) check amdgpu_gpu_recovery before creating sysfs file itself, and initialize supported_reset_types in IP version files (Lijo) Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Tim Huang <tim.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-08drm/amdgpu: Normalize reg offsets on VCN v4.0.3Sathishkumar S
Remote access to external AIDs isn't possible with VCN RRMT disabled and it is disabled on SoCs with GC 9.4.4, so use only local offsets. Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-08drm/amdgpu: Avoid kcq disable during resetLijo Lazar
Reset sequence indicates that hardware already ran into a bad state. Avoid sending unmap queue request to reset KCQ. This will also cover RAS error scenarios which need a reset to recover, hence remove the check. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Le Ma <le.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-08drm/amdgpu: Fix map/unmap queue logicLijo Lazar
In current logic, it calls ring_alloc followed by a ring_test. ring_test in turn will call another ring_alloc. This is illegal usage as a ring_alloc is expected to be closed properly with a ring_commit. Change to commit the map/unmap queue packet first followed by a ring_test. Add a comment about the usage of ring_test. Also, reorder the current pre-condition checks of job hang or kiq ring scheduler not ready. Without them being met, it is not useful to attempt ring or memory allocations. Fixes tag refers to the original patch which introduced this issue which then got carried over into newer code. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Le Ma <le.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Fixes: 6c10b5cc4eaa ("drm/amdgpu: Remove duplicate code in gfx_v8_0.c")
2024-11-08drm/amdgpu: fix ACA bank count boundary check errorYang Wang
fix ACA bank count boundary check error. Fixes: f5e4cc8461c4 ("drm/amdgpu: implement RAS ACA driver framework") Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-08drm/amdgpu: Add sysfs interface for gc reset maskJesse.zhang@amd.com
Add two sysfs interfaces for gfx and compute: gfx_reset_mask compute_reset_mask These interfaces are read-only and show the resets supported by the IP. For example, full adapter reset (mode1/mode2/BACO/etc), soft reset, queue reset, and pipe reset. V2: the sysfs node returns a text string instead of some flags (Christian) v3: add a generic helper which takes the ring as parameter and print the strings in the order they are applied (Christian) check amdgpu_gpu_recovery before creating sysfs file itself, and initialize supported_reset_types in IP version files (Lijo) v4: Fixing uninitialized variables (Tim) Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Tim Huang <tim.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-08drm/amdgpu: fix return random value when multiple threads read registers via ↵chongli2
mes. The currect code use the address "adev->mes.read_val_ptr" to store the value read from register via mes. So when multiple threads read register, multiple threads have to share the one address, and overwrite the value each other. Assign an address by "amdgpu_device_wb_get" to store register value. each thread will has an address to store register value. Signed-off-by: chongli2 <chongli2@amd.com> Reviewed-by: Emily Deng <Emily.Deng@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-08drm/amdkfd: remove gfx 12 trap handler page size capJonathan Kim
GFX 12 does not require a page size cap for the trap handler because it does not require a CWSR work around like GFX 11 did. Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: David Belanger <david.belanger@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-08drm/amdgpu: Add supported NPS modes nodeAsad Kamal
Add sysfs node to show supported NPS mode for the partition configuration selected using xcp_config v2: Hide node if dynamic nps switch not supported v3: Fix removal of files in case of error Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-08Merge tag 'drm-etnaviv-next-2024-11-07' of ↵Dave Airlie
https://git.pengutronix.de/git/lst/linux into drm-next - improve handling of DMA address limited systems - improve GPU hangcheck - fix address space collision on >= 4K CPU pages - flush all known writeback caches before memory release - various code cleanups Signed-off-by: Dave Airlie <airlied@redhat.com> From: Lucas Stach <l.stach@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/c84075a0257e7bee222d008fa3118117422d664e.camel@pengutronix.de
2024-11-08Merge tag 'amd-drm-next-6.13-2024-11-06' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.13-2024-11-06: amdgpu: - Misc cleanups - OLED fixes - DCN 4.x fixes - DCN 3.5 fixes - 8K fixes - IPS fixes - DSC fixes - S3 fix - KASAN fix - SMU13 fixes - fdinfo fixes - USB-C fixes - ACPI fix - Fix dummy page overlapping mappings - Fix workload profile handling - Add user control for zero RPM on SMU13 - Cleaner shader updates - Stop syncing PRT map operations - Debugfs permissions fixes - Debugfs bounds check fix - RAS cleanups - Enforce isolation updates amdkfd: - Add topology cap flag for per queue reset - Add an interface to query whether KFD queues are present - Use dynamic allocation for get_cu_occupancy From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241106163904.189108-1-alexander.deucher@amd.com Signed-off-by: Dave Airlie <airlied@redhat.com>
2024-11-06Merge tag 'exynos-drm-next-for-v6.13-v2' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next New feature - Add a compatible string, "samsung,exynos7870-decon", for supporting Exynos7870 SoC Decon device Signed-off-by: Dave Airlie <airlied@redhat.com> From: Inki Dae <inki.dae@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241106010943.796273-1-inki.dae@samsung.com
2024-11-06dt-bindings: display: samsung,exynos7-decon: add exynos7870 compatibleKaustabh Chakraborty
Add the compatible string of Exynos7870 to the existing list. Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2024-11-06Merge tag 'drm-msm-next-2024-11-04' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-next Late updates for v6.13 MDSS: - cleanup UBWC registers handling DP: - Mass-rename the symbols DPU: - SSPP handling cleanup - Move kerneldoc comments from headers to source files - Misc small fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGuGL6k3CKXZ0Qv-FTQ589+_PWNtid6i7MmVJLopBm2sYg@mail.gmail.com
2024-11-06Merge tag 'drm-intel-next-2024-11-04' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next drm/i915 feature pull #2 for v6.13: Features and functionality: - Pantherlake (PTL) Xe3 LPD display enabling for xe driver (Clint, Suraj, Dnyaneshwar, Matt, Gustavo, Radhakrishna, Chaitanya, Haridhar, Juha-Pekka, Ravi) - Enable dbuf overlap detection on Lunarlake and later (Stanislav, Vinod) - Allow fastset for HDR infoframe changes (Chaitanya) - Write DP source OUI also for non-eDP sinks (Imre) Refactoring and cleanups: - Independent platform identification for display (Jani) - Display tracepoint fixes and cleanups (Gustavo) - Share PCI ID headers between i915 and xe drivers (Jani) - Use x100 version for full version and release checks (Jani) - Conversions to struct intel_display (Jani, Ville) - Reuse DP DPCD and AUX macros in gvt instead of duplication (Jani) - Use string choice helpers (R Sundar, Sai Teja) - Remove unused underrun detection irq code (Sai Teja) - Color management debug improvements and other cleanups (Ville) - Refactor panel fitter code to a separate file (Ville) - Use try_cmpxchg() instead of open-coding (Uros Bizjak) Fixes: - PSR and Panel Replay fixes and workarounds (Jouni) - Fix panel power during connector detection (Imre) - Fix connector detection and modeset races (Imre) - Fix C20 PHY TX MISC configuration (Gustavo) - Improve panel fitter validity checks (Ville) - Fix eDP short HPD interrupt handling while runtime suspended (Imre) - Propagate DP MST DSC BW overhead/slice calculation errors (Imre) - Stop hotplug polling for eDP connectors (Imre) - Workaround panels reporting bad link status after PSR enable (Jouni) - Panel Replay VRR VSC SDP related workaround and refactor (Animesh, Mitul) - Fix memory leak on eDP init error path (Shuicheng) - Fix GVT KVMGT Kconfig dependencies (Arnd Bergmann) - Fix irq function documentation build warning (Rodrigo) - Add platform check to power management fuse bit read (Clint) - Revert kstrdup_const() and kfree_const() usage for clarity (Christophe JAILLET) - Workaround horizontal odd panning issues in display versions 20 and 30 (Nemesa) - Fix xe drive HDCP GSC firmware check (Suraj) Merges: - Backmerge drm-next to get some KVM changes (Rodrigo) - Fix a build failure originating from previous backmerge (Jani) Signed-off-by: Dave Airlie <airlied@redhat.com> # Conflicts: # drivers/gpu/drm/i915/display/intel_dp_mst.c From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87h68ni0wd.fsf@intel.com
2024-11-06Merge tag 'mediatek-drm-next-6.13' of ↵Dave Airlie
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next Mediatek DRM Next for Linux 6.13 1. Add support for OF graphs 2. Fix child node refcount handling and use scoped Signed-off-by: Dave Airlie <airlied@redhat.com> From: Chun-Kuang Hu <chunkuang.hu@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241104124103.8041-1-chunkuang.hu@kernel.org
2024-11-05drm/amdgpu: add missing size check in amdgpu_debugfs_gprwave_read()Alex Deucher
Avoid a possible buffer overflow if size is larger than 4K. Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-05drm/amdgpu: Adjust debugfs eviction and IB access permissionsAlex Deucher
Users should not be able to run these. Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-05drm/amdgpu: Adjust debugfs register access permissionsAlex Deucher
Regular users shouldn't have read access. Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-05drm/amdgpu: stop syncing PRT map operationsChristian König
Requested by both Bas and Friedrich. Mapping PTEs as PRT doesn't need to sync for anything. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Friedrich Vock <friedrich.vock@gmx.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-05drm/amdgpu: set the right AMDGPU sg segment limitationPrike Liang
The driver needs to set the correct max_segment_size; otherwise debug_dma_map_sg() will complain about the over-mapping of the AMDGPU sg length as following: WARNING: CPU: 6 PID: 1964 at kernel/dma/debug.c:1178 debug_dma_map_sg+0x2dc/0x370 [ 364.049444] Modules linked in: veth amdgpu(OE) amdxcp drm_exec gpu_sched drm_buddy drm_ttm_helper ttm(OE) drm_suballoc_helper drm_display_helper drm_kms_helper i2c_algo_bit rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs lockd grace netfs xt_conntrack xt_MASQUERADE nf_conntrack_netlink xfrm_user xfrm_algo iptable_nat xt_addrtype iptable_filter br_netfilter nvme_fabrics overlay nfnetlink_cttimeout nfnetlink openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c bridge stp llc amd_atl intel_rapl_msr intel_rapl_common sunrpc sch_fq_codel snd_hda_codec_realtek snd_hda_codec_generic snd_hda_scodec_component snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg edac_mce_amd binfmt_misc snd_hda_codec snd_pci_acp6x snd_hda_core snd_acp_config snd_hwdep snd_soc_acpi kvm_amd snd_pcm kvm snd_seq_midi snd_seq_midi_event crct10dif_pclmul ghash_clmulni_intel sha512_ssse3 snd_rawmidi sha256_ssse3 sha1_ssse3 aesni_intel snd_seq nls_iso8859_1 crypto_simd snd_seq_device cryptd snd_timer rapl input_leds snd [ 364.049532] ipmi_devintf wmi_bmof ccp serio_raw k10temp sp5100_tco soundcore ipmi_msghandler cm32181 industrialio mac_hid msr parport_pc ppdev lp parport drm efi_pstore ip_tables x_tables pci_stub crc32_pclmul nvme ahci libahci i2c_piix4 r8169 nvme_core i2c_designware_pci realtek i2c_ccgx_ucsi video wmi hid_generic cdc_ether usbnet usbhid hid r8152 mii [ 364.049576] CPU: 6 PID: 1964 Comm: rocminfo Tainted: G OE 6.10.0-custom #492 [ 364.049579] Hardware name: AMD Majolica-RN/Majolica-RN, BIOS RMJ1009A 06/13/2021 [ 364.049582] RIP: 0010:debug_dma_map_sg+0x2dc/0x370 [ 364.049585] Code: 89 4d b8 e8 36 b1 86 00 8b 4d b8 48 8b 55 b0 44 8b 45 a8 4c 8b 4d a0 48 89 c6 48 c7 c7 00 4b 74 bc 4c 89 4d b8 e8 b4 73 f3 ff <0f> 0b 4c 8b 4d b8 8b 15 c8 2c b8 01 85 d2 0f 85 ee fd ff ff 8b 05 [ 364.049588] RSP: 0018:ffff9ca600b57ac0 EFLAGS: 00010286 [ 364.049590] RAX: 0000000000000000 RBX: ffff88b7c132b0c8 RCX: 0000000000000027 [ 364.049592] RDX: ffff88bb0f521688 RSI: 0000000000000001 RDI: ffff88bb0f521680 [ 364.049594] RBP: ffff9ca600b57b20 R08: 000000000000006f R09: ffff9ca600b57930 [ 364.049596] R10: ffff9ca600b57928 R11: ffffffffbcb46328 R12: 0000000000000000 [ 364.049597] R13: 0000000000000001 R14: ffff88b7c19c0700 R15: ffff88b7c9059800 [ 364.049599] FS: 00007fb2d3516e80(0000) GS:ffff88bb0f500000(0000) knlGS:0000000000000000 [ 364.049601] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 364.049603] CR2: 000055610bd03598 CR3: 00000001049f6000 CR4: 0000000000350ef0 [ 364.049605] Call Trace: [ 364.049607] <TASK> [ 364.049609] ? show_regs+0x6d/0x80 [ 364.049614] ? __warn+0x8c/0x140 [ 364.049618] ? debug_dma_map_sg+0x2dc/0x370 [ 364.049621] ? report_bug+0x193/0x1a0 [ 364.049627] ? handle_bug+0x46/0x80 [ 364.049631] ? exc_invalid_op+0x1d/0x80 [ 364.049635] ? asm_exc_invalid_op+0x1f/0x30 [ 364.049642] ? debug_dma_map_sg+0x2dc/0x370 [ 364.049647] __dma_map_sg_attrs+0x90/0xe0 [ 364.049651] dma_map_sgtable+0x25/0x40 [ 364.049654] amdgpu_bo_move+0x59a/0x850 [amdgpu] [ 364.049935] ? srso_return_thunk+0x5/0x5f [ 364.049939] ? amdgpu_ttm_tt_populate+0x5d/0xc0 [amdgpu] [ 364.050095] ttm_bo_handle_move_mem+0xc3/0x180 [ttm] [ 364.050103] ttm_bo_validate+0xc1/0x160 [ttm] [ 364.050108] ? amdgpu_ttm_tt_get_user_pages+0xe5/0x1b0 [amdgpu] [ 364.050263] amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0xa12/0xc90 [amdgpu] [ 364.050473] kfd_ioctl_alloc_memory_of_gpu+0x16b/0x3b0 [amdgpu] [ 364.050680] kfd_ioctl+0x3c2/0x530 [amdgpu] [ 364.050866] ? __pfx_kfd_ioctl_alloc_memory_of_gpu+0x10/0x10 [amdgpu] [ 364.051054] ? srso_return_thunk+0x5/0x5f [ 364.051057] ? tomoyo_file_ioctl+0x20/0x30 [ 364.051063] __x64_sys_ioctl+0x9c/0xd0 [ 364.051068] x64_sys_call+0x1219/0x20d0 [ 364.051073] do_syscall_64+0x51/0x120 [ 364.051077] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 364.051081] RIP: 0033:0x7fb2d2f1a94f Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-05drm/amdgpu: Fix DPX valid mode check on GC 9.4.3Lijo Lazar
For DPX mode, the number of memory partitions supported should be less than or equal to 2. Fixes: 1589c82a1085 ("drm/amdgpu: Check memory ranges for valid xcp mode") Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-05drm/amdgpu/gfx11: Add cleaner shader for GFX11.0.3Srinivasan Shanmugam
This commit adds the cleaner shader microcode for GFX11.0.3 GPUs. The cleaner shader is a piece of GPU code that is used to clear or initialize certain GPU resources, such as Local Data Share (LDS), Vector General Purpose Registers (VGPRs), and Scalar General Purpose Registers (SGPRs). Clearing these resources is important for ensuring data isolation between different workloads running on the GPU. Without the cleaner shader, residual data from a previous workload could potentially be accessed by a subsequent workload, leading to data leaks and incorrect computation results. The cleaner shader microcode is represented as an array of 32-bit words (`gfx_11_0_3_cleaner_shader_hex`). This array is the binary representation of the cleaner shader code, which is written in a low-level GPU instruction set. When the cleaner shader feature is enabled, the AMDGPU driver loads this array into a specific location in the GPU memory. The GPU then reads this memory location to fetch and execute the cleaner shader instructions. The cleaner shader is executed automatically by the GPU at the end of each workload, before the next workload starts. This ensures that all GPU resources are in a clean state before the start of each workload. This addition is part of the cleaner shader feature implementation. The cleaner shader feature helps resource utilization by cleaning up GPU resources after they are used. It also enhances security and reliability by preventing data leaks between workloads. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-05drm/amd/pm: add zero RPM stop temperature OD setting support for SMU13Wolfgang Müller
Together with the feature to enable or disable zero RPM in the last commit, it also makes sense to expose the OD setting determining under which temperature the fan should stop if zero RPM is enabled. Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Wolfgang Müller <wolf@oriole.systems> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-05drm/amdgpu/mes: fetch fw version from firmware headerAlex Deucher
We need this prior to the firmware being loaded so fetch from the header. v2: fetch directly from the firmware v3: store both fw versions Reviewed-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-05drm/amd/pm: add zero RPM OD setting support for SMU13Wolfgang Müller
Whilst we have support for setting fan curves there is no support for disabling the zero RPM feature. Since the relevant bits are already present in the OverDriveTable, hook them up to a sysctl setting so users can influence this behaviour. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3489 Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Wolfgang Müller <wolf@oriole.systems> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-05Merge tag 'exynos-drm-next-for-v6.13' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next New feature - Add Decon driver support for Exynos7870 SoC . This patch adds driver data and support for Exynos7870 SoC in the Exynos7 Decon driver Bug fixups for exynos7_drm_decon.c module - Properly clear channels during bind . This patch implements shadow protection/unprotection to clear DECON channels properly, preventing kernel panic - Fix ideal_clk by converting it to HZ . This patch corrects the clkdiv values by converting ideal_clk to Hz for consistency - Fix uninitialized crtc reference in functions . This patch modifies functions to accept a pointer to the decon_context struct to avoid uninitialized references Cleanups - Remove unused prototype for crtc . This patch removes unused prototypes exynos_drm_crtc_wait_pending_update exynos_drm_crtc_finish_update - And just typo fixup Signed-off-by: Dave Airlie <airlied@redhat.com> From: Inki Dae <inki.dae@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241104031341.36549-1-inki.dae@samsung.com
2024-11-05Merge tag 'drm-xe-next-2024-10-31' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next UAPI Changes: - Define and parse OA sync properties (Ashutosh) Driver Changes: - Add caller info to xe_gt_reset_async (Nirmoy) - A large forcewake rework / cleanup (Himal) - A g2h response timeout fix (Badal) - A PTL workaround (Vinay) - Handle unreliable MMIO reads during forcewake (Shuicheng) - Ufence user-space access fixes (Nirmoy) - Annotate flexible arrays (Matthew Brost) - Enable GuC lite restore (Fei) - Prevent GuC register capture on VF (Zhanjun) - Show VFs VRAM / LMEM provisioning summary over debugfs (Michal) - Parallel queues fix on GT reset (Nirmoy) - Move reference grabbing to a job's dma-fence (Matt Brost) - Mark a number of local workqueues WQ_MEM_RECLAIM (Matt Brost) - OA synchronization support (Ashutosh) - Capture all available bits of GuC timestamp to GuC log (John) - Increase readability of guc_info debugfs (John) - Add a mmio barrier before GGTT invalidate (Matt Brost) - Don't short-circuit TDR on jobs not started (Matt Brost) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZyNvA_vZZYR-1eWE@fedora
2024-11-05Merge tag 'drm-msm-next-2024-10-28' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-next Updates for v6.13 Core: - Switch to aperture_remove_all_conflicting_devices() - Simplify msm_disp_state_dump_regs() DPU: - Add SA8775P support - Add (disabled by default) MSM8917, MSM8937, MSM8953 and MSM8996 support - Enable support for larger framebuffers (required for X.Org working with several outputs) - Dropped LM_3, LM_4 (MSM8998, SDM845) - Fixed DSPP_3 routing on SDM845 DP: - Add SA8775P support HDMI: - Mark two arrays as const in MSM8998 HDMI PHY driver GPU: - a7xx preemption support - Adreno A663 support - Typos fixes, etc - Fix excessive stack usage in a6xx GMU Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGt7k8zDHsg2Uzx9apzyQMut8XdLXMQSRNn7WArdPUV5Qw@mail.gmail.com
2024-11-04drm/amd/pm: correct the workload settingKenneth Feng
Correct the workload setting in order not to mix the setting with the end user. Update the workload mask accordingly. v2: changes as below: 1. the end user can not erase the workload from driver except default workload. 2. always shows the real highest priority workoad to the end user. 3. the real workload mask is combined with driver workload mask and end user workload mask. v3: apply this to the other ASICs as well. v4: simplify the code v5: refine the code based on the review comments. Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-04drm/amdgpu: Add compatible NPS mode infoLijo Lazar
Populate the compatible NPS modes also for providing partition configuration details through sysfs. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-04drm/amdgpu: Skip IP coredump for RAS errorsLijo Lazar
For RAS errors, source of error is known. Skip the core dump of IP states. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-04drm/amdgpu: Group gfx sysfs functionsLijo Lazar
Make amdgpu_gfx_sysfs_init/fini functions as common entry points for all gfx related sysfs nodes. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-04drm/amdgpu: Add nps_mode in RAS init_flagCandice Li
Add nps_mode in RAS init_flag. Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-04drm/amdgpu: add amdgpu_sdma_sched_mask debugfsJesse Zhang
Userspace wants to run jobs on a specific sdma ring for verification purposes. This debugfs entry helps to disable or enable submitting jobs to a specific ring. This entry is populated only if there are at least two or more cores in the sdma ip. Signed-off-by: Jesse Zhang <jesse.zhang@amd.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Tim Huang <tim.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-04drm/amdgpu: add amdgpu_gfx_sched_mask and amdgpu_compute_sched_mask debugfsJesse Zhang
compute/gfx may have multiple rings on some hardware. In some cases, userspace wants to run jobs on a specific ring for validation purposes. This debugfs entry helps to disable or enable submitting jobs to a specific ring. This entry is populated only if there are at least two or more cores in the gfx/compute ip. Signed-off-by: Jesse Zhang <jesse.zhang@amd.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Tim Huang <tim.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-04drm/amdgpu: Fix dummy_read_page overlapping mappingsPrike Liang
Use the dma_map_page_attrs() with DMA_ATTR_SKIP_CPU_SYNC attribute setting to handle the dummy page overlapping mappings. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Suggested-by: Christian König <christian.koenig@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-04drm/amdgpu: skip amdgpu_device_cache_pci_state under sriovVictor Zhao
Under sriov, host driver will save and restore vf pci cfg space during reset. And during device init, under sriov, pci_restore_state happens after fullaccess released, and it can have race condition with mmio protection enable from host side leading to missing interrupts. So skip amdgpu_device_cache_pci_state for sriov. Signed-off-by: Victor Zhao <Victor.Zhao@amd.com> Acked-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-04drm/amdkfd: Use dynamic allocation for CU occupancy array in ↵Srinivasan Shanmugam
'kfd_get_cu_occupancy()' The `kfd_get_cu_occupancy` function previously declared a large `cu_occupancy` array as a local variable, which could lead to stack overflows due to excessive stack usage. This commit replaces the static array allocation with dynamic memory allocation using `kcalloc`, thereby reducing the stack size. This change avoids the risk of stack overflows in kernel space, in scenarios where `AMDGPU_MAX_QUEUES` is large. The allocated memory is freed using `kfree` before the function returns to prevent memory leaks. Fixes the below with gcc W=1: drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_process.c: In function ‘kfd_get_cu_occupancy’: drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_process.c:322:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] 322 | } | ^ Fixes: 6ae9e1aba97e ("drm/amdkfd: Update logic for CU occupancy calculations") Cc: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Cc: Felix Kuehling <felix.kuehling@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Suggested-by: Mukul Joshi <mukul.joshi@amd.com> Reviewed-by: Mukul Joshi <mukul.joshi@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-04drm/amd/pm: always pick the pptable from IFWIKenneth Feng
always pick the pptable from IFWI on smu v14.0.2/3 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-04drm/amdgpu: prevent NULL pointer dereference if ATIF is not supportedAntonio Quartulli
acpi_evaluate_object() may return AE_NOT_FOUND (failure), which would result in dereferencing buffer.pointer (obj) while being NULL. Although this case may be unrealistic for the current code, it is still better to protect against possible bugs. Bail out also when status is AE_NOT_FOUND. This fixes 1 FORWARD_NULL issue reported by Coverity Report: CID 1600951: Null pointer dereferences (FORWARD_NULL) Signed-off-by: Antonio Quartulli <antonio@mandelbit.com> Fixes: c9b7c809b89f ("drm/amd: Guard against bad data for ATIF ACPI method") Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20241031152848.4716-1-antonio@mandelbit.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-04drm/amd/display: 3.2.308Aric Cyr
This version brings along following fixes: - Prune Invalid Modes for HDMI Output - SPL Cleanup - Fix brightness level not retained over reboot - Remove inaccessible registers from DMU diagnostics Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-04drm/amd/display: Prune Invalid Modes For HDMI OutputFangzhi Zuo
[Why] 1. HDMI does not have 6 bpc support. Having 6 bpc pass validation does not comply with spec. 2. Validate 420 only for native HDMI, but not apply to pcon use case. 3. Current mode validation log is not readable. [how] 1. Cap 8 bpc for dp-hdmi converter. 2. Validate yuv420 for pcon use case as well, if rgb/yuv444 8bpc cannot fit into pcon bw limitation of the link from the converter to HDMI sink. 3. Add readable pixel_format and color_depth into debug log. Reviewed-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-04drm/amd/display: Implement new backlight_level_params structureKaitlyn Tse
[Why] Implement the new backlight_level_params structure as part of the VBAC framework, the information in this structure is needed to be passed down to the DMCUB to identify the backlight control type, to adjust the backlight of the panel and to perform any required conversions from PWM to nits or vice versa. [How] Modified existing functions to include the new backlight_level_params structure. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Kaitlyn Tse <Kaitlyn.Tse@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-04drm/amd/display: [FW Promotion] Release 0.0.241.0Taimur Hassan
- Add DPCS health check - Update USB4 PHY SSC - Fix FAMS2 SubVP Close to VBlank changes - Create VESA Aux-based backlight control path - Fix PSR1 CRC error during CTS test Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-04drm/amd/display: Add a missing DCN401 reg definitionAurabindo Pillai
Add a mising reg field to the autogenerated header for future use Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-04drm/amd/pm: add inst to dpm_set_vcn_enableBoyuan Zhang
Add an instance parameter to the existing function dpm_set_vcn_enable() for future implementation. Re-write all pptable functions accordingly. v2: Remove duplicated dpm_set_vcn_enable() functions in v1. Instead, adding instance parameter to existing functions. Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com> Suggested-by: Christian König <christian.koenig@amd.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-04drm/amd/display: Don't write DP_MSTM_CTRL after LTWayne Lin
[Why] Observe after suspend/resme, we can't light up mst monitors under specific mst hub. The reason is that driver still writes DPCD DP_MSTM_CTRL after LT. It's forbidden even we write the same value for that dpcd register. [How] We already resume the mst branch device dpcd settings during resume_mst_branch_status(). Leverage drm_dp_mst_topology_queue_probe() to only probe the topology, not calling drm_dp_mst_topology_mgr_resume() which will set DP_MSTM_CTRL as well. Reviewed-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-04drm/amd/display: Minimize wait for pending updatesIlya Bakoulin
[Why/How] Move the wait for pending updates past prepare_bandwidth if the previous update was not a full update to reduce the average time it takes to complete a full update. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-04drm/amd/display: parse umc_info or vram_info based on ASICAurabindo Pillai
An upstream bug report suggests that there are production dGPUs that are older than DCN401 but still have a umc_info in VBIOS tables with the same version as expected for a DCN401 product. Hence, reading this tables should be guarded with a version check. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3678 Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-04-09 12:32:11 +0000