| Age | Commit message (Collapse) | Author |
|---|
|
The stop_machine loop to advance the state machine and to wait for all
affected CPUs to check-in calls cpu_relax_yield in a tight loop until
the last missing CPUs acknowledged the state transition.
On a virtual system where not all logical CPUs are backed by real CPUs
all the time it can take a while for all CPUs to check-in. With the
current definition of cpu_relax_yield a diagnose 0x44 is done which
tells the hypervisor to schedule *some* other CPU. That can be any
CPU and not necessarily one of the CPUs that need to run in order to
advance the state machine. This can lead to a pretty bad diagnose 0x44
storm until the last missing CPU finally checked-in.
Replace the undirected cpu_relax_yield based on diagnose 0x44 with a
directed yield. Each CPU in the wait loop will pick up the next CPU
in the cpumask of stop_machine. The diagnose 0x9c is used to tell the
hypervisor to run this next CPU instead of the current one. If there
is only a limited number of real CPUs backing the virtual CPUs we
end up with the real CPUs passed around in a round-robin fashion.
[heiko.carstens@de.ibm.com]:
Use cpumask_next_wrap as suggested by Peter Zijlstra.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
spin_cpu_yield is unused, therefore remove it.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
Simplify conditions and remove unnecessary variable in data exception
handler.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
The hypervisor needs to interact with the summary indicators, so these
need to be DMA memory as well (at least for protected virtualization
guests).
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
Before virtio-ccw could get away with not using DMA API for the pieces of
memory it does ccw I/O with. With protected virtualization this has to
change, since the hypervisor needs to read and sometimes also write these
pieces of memory.
The hypervisor is supposed to poke the classic notifiers, if these are
used, out of band with regards to ccw I/O. So these need to be allocated
as DMA memory (which is shared memory for protected virtualization
guests).
Let us factor out everything from struct virtio_ccw_device that needs to
be DMA memory in a satellite that is allocated as such.
Note: The control blocks of I/O instructions do not need to be shared.
These are marshalled by the ultravisor.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
This will come in handy soon when we pull out the indicators from
virtio_ccw_device to a memory area that is shared with the hypervisor
(in particular for protected virtualization guests).
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
The flag AIRQ_IV_CACHELINE was recently added to airq_iv_create(). Let
us use it! We actually wanted the vector to span a cacheline all along.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
Protected virtualization guests have to use shared pages for airq
notifier bit vectors, because the hypervisor needs to write these bits.
Let us make sure we allocate DMA memory for the notifier bit vectors by
replacing the kmem_cache with a dma_cache and kalloc() with
cio_dma_zalloc().
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Sebastian Ott <sebott@linux.ibm.com>
Reviewed-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
As virtio-ccw devices are channel devices, we need to use the
dma area within the common I/O layer for any communication with
the hypervisor.
Note that we do not need to use that area for control blocks
directly referenced by instructions, e.g. the orb.
It handles neither QDIO in the common code, nor any device type specific
stuff (like channel programs constructed by the DASD driver).
An interesting side effect is that virtio structures are now going to
get allocated in 31 bit addressable storage.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Sebastian Ott <sebott@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
To support protected virtualization cio will need to make sure the
memory used for communication with the hypervisor is DMA memory.
Let us introduce one global pool for cio.
Our DMA pools are implemented as a gen_pool backed with DMA pages. The
idea is to avoid each allocation effectively wasting a page, as we
typically allocate much less than PAGE_SIZE.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Sebastian Ott <sebott@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
On s390, protected virtualization guests have to use bounced I/O
buffers. That requires some plumbing.
Let us make sure, any device that uses DMA API with direct ops correctly
is spared from the problems, that a hypervisor attempting I/O to a
non-shared page would bring.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
Let's use the error value that is typically used if HW support is not
available when trying to load a module - this is also what systemd's
systemd-modules-load.service expects.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
Let's use the error value that is typically used if HW support is not
available when trying to load a module - this is also what systemd's
systemd-modules-load.service expects.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
Let's use the error value that is typically used if HW support is not
available when trying to load a module - this is also what systemd's
systemd-modules-load.service expects.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
systemd-modules-load.service automatically tries to load the pkey module
on systems that have MSA.
Pkey also requires the MSA3 facility and a bunch of subfunctions.
Failing with -EOPNOTSUPP makes "systemd-modules-load.service" fail on
any system that does not have all needed subfunctions. For example,
when running under QEMU TCG (but also on systems where protected keys
are disabled via the HMC).
Let's use -ENODEV, so systemd-modules-load.service properly ignores
failing to load the pkey module because of missing HW functionality.
While at it, also convert the -EOPNOTSUPP in pkey_clr2protkey() to -ENODEV.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
Move the CONFIG_CRASH_DUMP ifdef to get rid of this:
arch/s390/kernel/machine_kexec.c:146:22: warning: 'do_start_kdump' defined but not used [-Wunused-function]
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
gcc silently ignores unsupported inline asm operand modifiers, effectively
turning '%r0' into '%0', but upcoming clang 9 complains about them:
lib/raid6/s390vx8.c:63:16: error: invalid operand in inline asm: 'VLM $2,$3,0,${1:r}'
asm volatile ("VLM %2,%3,0,%r1"
^
Clean up what look like a typo 'r' inline asm operand modifier usage.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
Instead of keeping the documentation inside s390dbf.rst,
move them to arch/s390/include/asm/debug.h, using standard
kernel-doc markups.
Keeping the documentation close to the code helps to keep it
updated. It also makes easier to document other stuff inside
debug.h, as all it needs is to add kernel-doc markups inside
it, as the file will be already be included at the produced
documentation.
-
Those were converted to kerneldoc using this script specially
designed to parse ths file, and manually editted:
<script>
use strict;
my $mode = "";
my $parameter = "";
my $ret = "";
my $descr = "";
sub add_var($)
{
my $ln = shift;
$ln =~ s/^\s+//;
$ln =~ s/\s+$//;
return if ($ln eq "");
$ln =~ s/^(\S+)\s+/$1\t/;
print " * \@$ln\n";
}
sub add_return($)
{
my $ln = shift;
print " *\n * Return:\n" if ($mode ne "Return Value:");
$ln =~ s/^\s+//;
$ln =~ s/\s+$//;
return if ($ln eq "");
print " * - $ln\n";
}
sub add_description($)
{
my $ln = shift;
print " *\n * \n" if ($mode ne "Description:");
$ln =~ s/^\s+//;
$ln =~ s/\s+$//;
return if ($ln eq "");
print " * $ln\n";
}
sub flush_results()
{
print " */\n\n";
}
while (<>) {
if (m/^[\-]+$/) {
flush_results();
$mode = "";
$parameter = "";
$ret = "";
$descr = "";
next;
}
if (m/(Parameter:)(.*)/) {
print " *\n" if ($mode eq "func");
add_var($2);
$mode = $1;
next;
}
if (m/(Return Value:)(.*)/) {
add_return($2);
$mode = $1;
next;
}
if (m/(Description:)(.*)/) {
add_description($2);
$mode = $1;
next;
}
if ($mode eq "Parameter:") {
add_var($_);
next;
}
if ($mode eq "Return Value:") {
add_return($_);
next;
}
if ($mode eq "Description:") {
add_description($_);
next;
}
next if (m/^\s*$/);
if (m/^\S+.*\s\*?(\S+)\s*\(/) {
if ($mode eq "") {
print "/**\n * $1()\n";
} else {
print " * $1()\n";
}
$mode="func";
}
}
flush_results();
</script>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
Convert all text files with s390 documentation to ReST format.
Tried to preserve as much as possible the original document
format. Still, some of the files required some work in order
for it to be visible on both plain text and after converted
to html.
The conversion is actually:
- add blank lines and identation in order to identify paragraphs;
- fix tables markups;
- add some lists markups;
- mark literal blocks;
- adjust title markups.
At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
The first bit/value table inside the document is very
hard to read and won't fit ReST format. Also, some columns aren't
properly aligned.
Convert it to a nice ascii artwork table with makes it easier to
read as plain text and is compatible with ReST format parser
on Sphinx.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
When a CQ-enabled device uses QEBSM for SBAL state inspection,
get_buf_states() can return the PENDING state for an Output Queue.
get_outbound_buffer_frontier() isn't prepared for this, and any PENDING
buffer will permanently stall all further completion processing on this
Queue.
This isn't a concern for non-QEBSM devices, as get_buf_states() for such
devices will manually turn PENDING buffers into EMPTY ones.
Fixes: 104ea556ee7f ("qdio: support asynchronous delivery of storage blocks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
Get rid of gcc9 warnings like this:
arch/s390/boot/ipl_report.c: In function 'find_bootdata_space':
arch/s390/boot/ipl_report.c:42:26: warning: taking address of packed member of 'struct ipl_rb_components' may result in an unaligned pointer value [-Waddress-of-packed-member]
42 | for_each_rb_entry(comp, comps)
| ^~~~~
This is effectively the s390 variant of commit 20c6c1890455
("x86/boot: Disable the address-of-packed-member compiler warning").
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
Add missing parameter description to fix the following warning:
drivers/s390/cio/qdio_thinint.c:183: warning:
Function parameter or member 'floating' not described in 'tiqdio_thinint_handler'
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
Within an EP11 cprb there exists a byte field flags. Bit 0x20
of this field indicates a special cprb. A special cprb triggers
special handling in the firmware below the OS layer.
However, a special cprb also needs to have the S bit in GPR0
set when NQAP is called. This was not the case for EP11 cprbs
and this patch now introduces the code to support this.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
__aligned() is a shorthand that is only available in the kernel space
because it is defined in include/linux/compiler_attributes.h, which is
not exported to the user space.
Detected by compile-testing exported headers.
./usr/include/asm/runtime_instr.h:60:37: error: expected declaration specifiers or ‘...’ before numeric constant
} __attribute__((packed)) __aligned(8);
^
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
Remove the CONFIG_UEVENT_HELPER_PATH because:
1. It is disabled since commit 1be01d4a5714 ("driver: base: Disable
CONFIG_UEVENT_HELPER by default") as its dependency (UEVENT_HELPER) was
made default to 'n',
2. It is not recommended (help message: "This should not be used today
[...] creates a high system load") and was kept only for ancient
userland,
3. Certain userland specifically requests it to be disabled (systemd
README: "Legacy hotplug slows down the system and confuses udev").
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
x86 and powerpc (partially) enforce already CONFIG_HOTPLUG_CPU. On
s390 it is enabled on all distributions by default since ages.
The only exception is our zfcpdump kernel.
However to simplify testing, enforce HOTPLUG_CPU. This was suggested
by Paul McKenney, since his rcutorture test environments for CONFIG_SMP=y
only support HOTPLUG_CPU=y.
Suggested-by: Paul E. McKenney <paulmck@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
There never have been distributions that shiped with CONFIG_SMP=n for
s390. In addition the kernel currently doesn't even compile with
CONFIG_SMP=n for s390. Most likely it wouldn't even work, even if we
fix the compile error, since nobody tests it, since there is no use
case that I can think of.
Therefore simply enforce CONFIG_SMP and get rid of some more or
less unused code.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw into features
various vfio-ccw fixes (ccw translation, state machine)
|
|
Sync with binutils and add a couple of missing instructions.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
randomize_stack_top() checks for current task flag PF_RANDOMIZE in order
to use stack randomization and PF_RANDOMIZE is set when
ADDR_NO_RANDOMIZE is unset, so no need to check for ADDR_NO_RANDOMIZE
in stack_maxrandom_size.
[heiko.carstens@de.ibm.com]: See also commit 01578e36163c ("x86/elf:
Remove the unnecessary ADDR_NO_RANDOMIZE checks")
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
Formatting of Kconfig files doesn't look so pretty, so just
take damp cloth and clean it up.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
Since commit 4c0f032d4963 ("s390/purgatory: Omit use of bin2c"),
kexec-purgatory.c is not generated.
purgatory and purgatory.lds are generated files, so should be ignored
by git.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
'targets' should be specified to include .*.cmd files to evaluate
if_changed or friends.
Here, facility-defs.h and dis-defs.h are generated by filechk.
Because filechk does not generate .*.cmd file, the 'targets' addition
is meaningless. The filechk correctly updates the target when its
content is changed.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
As you can see in scripts/Kbuild.include, the filechk creates the
parent directory of the target as needed.
This Makefile does not need to explicitly create the directory.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
The top level Makefile adds -Wall globally for all host tools:
KBUILD_HOSTCFLAGS := -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 \
I see two "-Wall" added for compiling these tools.
Of course, it is allowed to pass the same option multiple times, but
we do not need to do so.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
I guess HOSTCFLAGS_gen_opcode_table.o was blindly copied from
HOSTCFLAGS_gen_facilities.o
The reason of adding $(LINUXINCLUDE) to HOSTCFLAGS_gen_facilities.o
is because gen_facilities.c references some CONFIG options. (Kbuild
does not cater to this for host tools automatically.)
On the other hand, gen_opcode_table.c does not reference CONFIG
options at all. So, there is no good reason to pass $(LINUXINCLUDE).
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
Use the new struct_size() helper to keep code simple.
Signed-off-by: xiaolinkui <xiaolinkui@kylinos.cn>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
The use of stop_machine to replace the mask bits of the jump label branch
is a very heavy-weight operation. This is in fact not necessary, the
mask of the branch can simply be updated, followed by a signal processor
to all the other CPUs to force them to pick up the modified instruction.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
[heiko.carstens@de.ibm.com]: Change jump_label_make_nop() so we get
brcl 0,offset instead of brcl 0,0. This
makes sure that only the mask part of the
instruction gets changed when updated.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
If the CCW being processed is a No-Operation, then by definition no
data is being transferred. Let's fold those checks into the normal
CCW processors, rather than skipping out early.
Likewise, if the CCW being processed is a "test" (a category defined
here as an opcode that contains zero in the lowest four bits) then no
special processing is necessary as far as vfio-ccw is concerned.
These command codes have not been valid since the S/370 days, meaning
they are invalid in the same way as one that ends in an eight [1] or
an otherwise valid command code that is undefined for the device type
in question. Considering that, let's just process "test" CCWs like
any other CCW, and send everything to the hardware.
[1] POPS states that a x08 is a TIC CCW, and that having any high-order
bits enabled is invalid for format-1 CCWs. For format-0 CCWs, the
high-order bits are ignored.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190516161403.79053-4-farman@linux.ibm.com>
Acked-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
It is possible that a guest might issue a CCW with a length of zero,
and will expect a particular response. Consider this chain:
Address Format-1 CCW
-------- -----------------
0 33110EC0 346022CC 33177468
1 33110EC8 CF200000 3318300C
CCW[0] moves a little more than two pages, but also has the
Suppress Length Indication (SLI) bit set to handle the expectation
that considerably less data will be moved. CCW[1] also has the SLI
bit set, and has a length of zero. Once vfio-ccw does its magic,
the kernel issues a start subchannel on behalf of the guest with this:
Address Format-1 CCW
-------- -----------------
0 021EDED0 346422CC 021F0000
1 021EDED8 CF240000 3318300C
Both CCWs were converted to an IDAL and have the corresponding flags
set (which is by design), but only the address of the first data
address is converted to something the host is aware of. The second
CCW still has the address used by the guest, which happens to be (A)
(probably) an invalid address for the host, and (B) an invalid IDAW
address (doubleword boundary, etc.).
While the I/O fails, it doesn't fail correctly. In this example, we
would receive a program check for an invalid IDAW address, instead of
a unit check for an invalid command.
To fix this, revert commit 4cebc5d6a6ff ("vfio: ccw: validate the
count field of a ccw before pinning") and allow the individual fetch
routines to process them like anything else. We'll make a slight
adjustment to our allocation of the pfn_array (for direct CCWs) or
IDAL (for IDAL CCWs) memory, so that we have room for at least one
address even though no guest memory will be pinned and thus the
IDAW will not be populated with a host address.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190516161403.79053-3-farman@linux.ibm.com>
Acked-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
The skip flag of a CCW offers the possibility of data not being
transferred, but is only meaningful for certain commands.
Specifically, it is only applicable for a read, read backward, sense,
or sense ID CCW and will be ignored for any other command code
(SA22-7832-11 page 15-64, and figure 15-30 on page 15-75).
(A sense ID is xE4, while a sense is x04 with possible modifiers in the
upper four bits. So we will cover the whole "family" of sense CCWs.)
For those scenarios, since there is no requirement for the target
address to be valid, we should skip the call to vfio_pin_pages() and
rely on the IDAL address we have allocated/built for the channel
program. The fact that the individual IDAWs within the IDAL are
invalid is fine, since they aren't actually checked in these cases.
Set pa_nr to zero when skipping the pfn_array_pin() call, since it is
defined as the number of pages pinned and is used to determine
whether to call vfio_unpin_pages() upon cleanup.
The pfn_array_pin() routine returns the number of pages that were
pinned, but now might be skipped for some CCWs. Thus we need to
calculate the expected number of pages ourselves such that we are
guaranteed to allocate a reasonable number of IDAWs, which will
provide a valid address in CCW.CDA regardless of whether the IDAWs
are filled in with pinned/translated addresses or not.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190516161403.79053-2-farman@linux.ibm.com>
Acked-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Let's initialize the host address to something that is invalid,
rather than letting it default to zero. This just makes it easier
to notice when a pin operation has failed or been skipped.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190514234248.36203-5-farman@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
The pfn_array_alloc_pin routine is doing too much. Today, it does the
alloc of the pfn_array struct and its member arrays, builds the iova
address lists out of a contiguous piece of guest memory, and asks vfio
to pin the resulting pages.
Let's effectively revert a significant portion of commit 5c1cfb1c3948
("vfio: ccw: refactor and improve pfn_array_alloc_pin()") such that we
break pfn_array_alloc_pin() into its component pieces, and have one
routine that allocates/populates the pfn_array structs, and another
that actually pins the memory. In the future, we will be able to
handle scenarios where pinning memory isn't actually appropriate.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190514234248.36203-4-farman@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Otherwise, the guest can believe it's okay to start another I/O
and bump into the non-idle state. This results in a cc=2 (with
the asynchronous CSCH/HSCH code) returned to the guest, which is
unfortunate since everything is otherwise working normally.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20190514234248.36203-3-farman@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Per the POPs [1], when processing an interrupt the SCSW.CPA field of an
IRB generally points to 8 bytes after the last CCW that was executed
(there are exceptions, but this is the most common behavior).
In the case of an error, this points us to the first un-executed CCW
in the chain. But in the case of normal I/O, the address points beyond
the end of the chain. While the guest generally only cares about this
when possibly restarting a channel program after error recovery, we
should convert the address even in the good scenario so that we provide
a consistent, valid, response upon I/O completion.
[1] Figure 16-6 in SA22-7832-11. The footnotes in that table also state
that this is true even if the resulting address is invalid or protected,
but moving to the end of the guest chain should not be a surprise.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190514234248.36203-2-farman@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Two fixes: a quirk for KVM guests running on certain AMD CPUs, and a
KASAN related build fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Don't force the CPB cap when running under a hypervisor
x86/boot: Provide KASAN compatible aliases for string routines
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"On the kernel side there's a bunch of ring-buffer ordering fixes for a
reproducible bug, plus a PEBS constraints regression fix.
Plus tooling fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools headers UAPI: Sync kvm.h headers with the kernel sources
perf record: Fix s390 missing module symbol and warning for non-root users
perf machine: Read also the end of the kernel
perf test vmlinux-kallsyms: Ignore aliases to _etext when searching on kallsyms
perf session: Add missing swap ops for namespace events
perf namespace: Protect reading thread's namespace
tools headers UAPI: Sync drm/drm.h with the kernel
tools headers UAPI: Sync drm/i915_drm.h with the kernel
tools headers UAPI: Sync linux/fs.h with the kernel
tools headers UAPI: Sync linux/sched.h with the kernel
tools arch x86: Sync asm/cpufeatures.h with the with the kernel
tools include UAPI: Update copy of files related to new fspick, fsmount, fsconfig, fsopen, move_mount and open_tree syscalls
perf arm64: Fix mksyscalltbl when system kernel headers are ahead of the kernel
perf data: Fix 'strncat may truncate' build failure with recent gcc
perf/ring-buffer: Use regular variables for nesting
perf/ring-buffer: Always use {READ,WRITE}_ONCE() for rb->user_page data
perf/ring_buffer: Add ordering to rb->nest increment
perf/ring_buffer: Fix exposing a temporarily decreased data_head
perf/x86/intel/ds: Fix EVENT vs. UEVENT PEBS constraints
|
