| Age | Commit message (Collapse) | Author |
|---|
|
Following what was done on MT8183 and MT8195, also propagate the rate
changes to MFG_BG3D's parent on MT8192 to allow for proper GPU DVFS.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220927101128.44758-10-angelogioacchino.delregno@collabora.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
These PLLs are conflicting with GPU rates that can be generated by
the GPU-dedicated MFGPLL and would require a special clock handler
to be used, for very little and ignorable power consumption benefits.
Also, we're in any case unable to set the rate of these PLLs to
something else that is sensible for this task, so simply drop them:
this will make the GPU to be clocked exclusively from MFGPLL for
"fast" rates, while still achieving the right "safe" rate during
PLL frequency locking.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220927101128.44758-9-angelogioacchino.delregno@collabora.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
Following the changes done to MT8183, register a similar notifier
for MT8195 as well, allowing safe clockrate updates for the MFGPLL.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Link: https://lore.kernel.org/r/20220927101128.44758-8-angelogioacchino.delregno@collabora.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
This clock was being registered as clk-composite through the helpers
for the same in the MediaTek clock APIs but, in reality, this isn't
a composite clock.
Appropriately register this clock with devm_clk_hw_register_mux().
No functional changes.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220927101128.44758-7-angelogioacchino.delregno@collabora.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
The MFG_BG3D is a gate to enable/disable clock output to the GPU,
but the actual output is decided by multiple muxes; in particular:
mfg_ck_fast_ref muxes between "slow" (top_mfg_core_tmp) and
"fast" (MFGPLL) clock, while top_mfg_core_tmp muxes between the
26MHz clock and various system PLLs.
The clock gate comes after all the muxes, so its parent is
mfg_ck_fast_reg, not top_mfg_core_tmp.
Reparent MFG_BG3D to the latter to match the hardware and add the
CLK_SET_RATE_PARENT flag to it: this way we ensure propagating
rate changes that are requested on MFG_BG3D along its entire clock
tree.
Fixes: 35016f10c0e5 ("clk: mediatek: Add MT8195 mfgcfg clock support")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220927101128.44758-6-angelogioacchino.delregno@collabora.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
When the MFG PLL clock, which is upstream of the MFG clock, is changed,
the downstream clock and consumers need to be switched away from the PLL
over to a stable clock to avoid glitches.
This is done through the use of the newly added clk mux notifier. The
notifier is set on the mux itself instead of the upstream PLL, but in
practice this works, as the rate change notifitcations are propogated
throughout the sub-tree hanging off the PLL. Just before rate changes,
the MFG mux is temporarily and transparently switched to the 26 MHz
main crystal. After the rate change, the mux is switched back.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
[Angelo: Rebased to assign clk_ops in mtk_mux_nb]
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Link: https://lore.kernel.org/r/20220927101128.44758-5-angelogioacchino.delregno@collabora.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
With device frequency scaling, the mux clock that (indirectly) feeds the
device selects between a dedicated PLL, and some other stable clocks.
When a clk rate change is requested, the (normally) upstream PLL is
reconfigured. It's possible for the clock output of the PLL to become
unstable during this process.
To avoid causing the device to glitch, the mux should temporarily be
switched over to another "stable" clock during the PLL rate change.
This is done with clk notifiers.
This patch adds common functions for notifiers to temporarily and
transparently reparent mux clocks.
This was loosely based on commit 8adfb08605a9 ("clk: sunxi-ng: mux: Add
clk notifier functions").
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
[Angelo: Changed mtk_mux_nb to hold a pointer to clk_ops instead of mtk_mux]
Co-developed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Link: https://lore.kernel.org/r/20220927101128.44758-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
The only clock in the MT8183 MFGCFG block feeds the GPU. Propagate its
rate change requests to its parent, so that DVFS for the GPU can work
properly.
Fixes: acddfc2c261b ("clk: mediatek: Add MT8183 clock support")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220927101128.44758-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
Register gates with dev in mtk_clk_simple_probe.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220813083319.45455-1-y.oudjana@protonmail.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
This allows it to be used in drivers built as modules.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/r/20220813083249.45427-1-y.oudjana@protonmail.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
Add the clock gate definition for the DPI1 hardware
in VDOSYS1.
The parent clock "hdmi_txpll" is already defined in
`mt8195.dtsi`.
Signed-off-by: Pablo Sun <pablo.sun@mediatek.com>
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220919-v1-2-4844816c9808@baylibre.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
Expand dt-bindings slot for VDOSYS1 of MT8195.
This clock is required by the DPI1 hardware
and is a downstream of the HDMI pixel clock.
Signed-off-by: Pablo Sun <pablo.sun@mediatek.com>
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220919-v1-1-4844816c9808@baylibre.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
mt8192 is already using mtk_clk_simple_probe,
but not mtk_clk_simple_remove.
Let's add mtk_clk_simple_remove for mt8192.
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220922091841.4099-8-miles.chen@mediatek.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
mtk_clk_simple_probe was added by Chun-Jie to simply common flow
of MediaTek clock drivers and ChenYu enhanced the error path of
mtk_clk_simple_probe and added mtk_clk_simple_remove.
Let's use mtk_clk_simple_probe and mtk_clk_simple_probe in other
MediaTek clock drivers as well.
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220922091841.4099-7-miles.chen@mediatek.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
mtk_clk_simple_probe was added by Chun-Jie to simply common flow
of MediaTek clock drivers and ChenYu enhanced the error path of
mtk_clk_simple_probe and added mtk_clk_simple_remove.
Let's use mtk_clk_simple_probe and mtk_clk_simple_probe in other
MediaTek clock drivers as well.
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220922091841.4099-6-miles.chen@mediatek.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
mtk_clk_simple_probe was added by Chun-Jie to simply common flow
of MediaTek clock drivers and ChenYu enhanced the error path of
mtk_clk_simple_probe and added mtk_clk_simple_remove.
Let's use mtk_clk_simple_probe and mtk_clk_simple_probe in other
MediaTek clock drivers as well.
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220922091841.4099-5-miles.chen@mediatek.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
mtk_clk_simple_probe was added by Chun-Jie to simply common flow
of MediaTek clock drivers and ChenYu enhanced the error path of
mtk_clk_simple_probe and added mtk_clk_simple_remove.
Let's use mtk_clk_simple_probe and mtk_clk_simple_probe in other
MediaTek clock drivers as well.
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220922091841.4099-4-miles.chen@mediatek.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
mtk_clk_simple_probe was added by Chun-Jie to simply common flow
of MediaTek clock drivers and ChenYu enhanced the error path of
mtk_clk_simple_probe and added mtk_clk_simple_remove.
Let's use mtk_clk_simple_probe and mtk_clk_simple_probe in other
MediaTek clock drivers as well.
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220922091841.4099-3-miles.chen@mediatek.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
mtk_clk_simple_probe was added by Chun-Jie to simply common flow
of MediaTek clock drivers and ChenYu enhanced the error path of
mtk_clk_simple_probe and added mtk_clk_simple_remove.
Let's use mtk_clk_simple_probe and mtk_clk_simple_probe in other
MediaTek clock drivers as well.
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220922091841.4099-2-miles.chen@mediatek.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
Add the clock drivers for the entire clock tree of MediaTek Helio X10
MT6795, including system clocks (apmixedsys, infracfg, pericfg, topckgen)
and multimedia clocks (mmsys, mfg, vdecsys, vencsys).
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Link: https://lore.kernel.org/r/20220921091455.41327-9-angelogioacchino.delregno@collabora.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
The ref2usb_tx clock was introduced a long time ago and, at that time,
the MediaTek clock drivers were using CLK_OF_DECLARE, so they would
never unregister.
Nowadays, unregistering clock drivers is a thing, as we're registering
them as platform_driver and allowing them to be kernel modules: add a
helper function to cleanup the ref2usb_tx clock during error handling
and upon module removal.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220921091455.41327-8-angelogioacchino.delregno@collabora.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
In order to compile the clock drivers for various MediaTek SoCs as
modules, it is necessary to export a few functions from the MediaTek
specific clocks (and reset) libraries.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Link: https://lore.kernel.org/r/20220921091455.41327-7-angelogioacchino.delregno@collabora.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
Remove an unneeded __init annotation from the declaration of function
mtk_clk_register_ref2usb_tx(): this avoids section mismatch warnings
during modpost phase when called from functions that have no such
annotation (useful when clocks are platform drivers).
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Link: https://lore.kernel.org/r/20220921091455.41327-6-angelogioacchino.delregno@collabora.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
Add the bindings for the clock drivers of the MediaTek Helio X10
MT6795 SoC.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220921091455.41327-5-angelogioacchino.delregno@collabora.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
Add the reset controller bindings for MT6795.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220921091455.41327-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
Add the bindings for MT6795's clock controller.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220921091455.41327-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
Document the MediaTek Helio X10 (MT6795) bindings for the apmixedsys,
infracfg, topckgen, pericfg and mmsys system controllers.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220921091455.41327-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
Add the reset idx for the t-phy port 1, used as either USB or
PCI-Express (secondary controller) PHY, depending on board-specific
configuration/layout.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220720102817.237483-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add the reset index for USBSIF P1 (T-PHY port 1), used as either USB
or PCI-Express PHY reset.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220720102817.237483-2-angelogioacchino.delregno@collabora.com
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The pwrmcu is responsible for power management and idle states in SSPM:
on older SoCs this was managed in Linux drivers like sspm/mcupm/eemgpu
but, at least on MT8195, this functionality was transferred to the ATF
firmware.
For this reason, turning off the pwrmcu related clocks from the kernel
will lead to unability to resume the platform after suspend and other
currently unknown PM related side-effects.
Set the PWRMCU and PWRMCU_BUS_H clocks as critical to prevent the
kernel from turning them off, fixing the aforementioned issue.
Fixes: e2edf59dec0b ("clk: mediatek: Add MT8195 infrastructure clock support")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220719093316.37253-1-angelogioacchino.delregno@collabora.com
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add the reset idx for PCIe P0, P1, located in infra_ao RST2 registers.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220629105205.173471-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add the reset index for PCIe P0 and P1 (PCIe0, PCIe1) on MT8195.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220629105205.173471-2-angelogioacchino.delregno@collabora.com
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Like it was done for the vdo0_dp_intf0_dp_intf clock (used for eDP),
add the CLK_SET_RATE_PARENT flag to CLK_VDO1_DPINTF (used for DP)
and also fix its parent clock name as it has to be "top_dp" for two
reasons:
- This is its real parent!
- Likewise to eDP/VDO0 counterpart, we need clock source
selection on CLK_TOP_DP.
Fixes: 269987505ba9 ("clk: mediatek: Add MT8195 vdosys1 clock support")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220816193257.658487-3-nfraprado@collabora.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add the CLK_SET_RATE_PARENT flag to the CLK_VDO0_DP_INTF0_DP_INTF
clock: this is required to trigger clock source selection on
CLK_TOP_EDP, while avoiding to manage the enablement of the former
separately from the latter in the displayport driver.
Fixes: 70282c90d4a2 ("clk: mediatek: Add MT8195 vdosys0 clock support")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220816193257.658487-2-nfraprado@collabora.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
|
|
Radix tree header includes gfp.h for __GFP_BITS_SHIFT only. Now we
have gfp_types.h for this.
Fixes powerpc allmodconfig build:
In file included from include/linux/nodemask.h:97,
from include/linux/mmzone.h:17,
from include/linux/gfp.h:7,
from include/linux/radix-tree.h:12,
from include/linux/idr.h:15,
from include/linux/kernfs.h:12,
from include/linux/sysfs.h:16,
from include/linux/kobject.h:20,
from include/linux/pci.h:35,
from arch/powerpc/kernel/prom_init.c:24:
include/linux/random.h: In function 'add_latent_entropy':
>> include/linux/random.h:25:46: error: 'latent_entropy' undeclared (first use in this function); did you mean 'add_latent_entropy'?
25 | add_device_randomness((const void *)&latent_entropy, sizeof(latent_entropy));
| ^~~~~~~~~~~~~~
| add_latent_entropy
include/linux/random.h:25:46: note: each undeclared identifier is reported only once for each function it appears in
Reported-by: kernel test robot <lkp@intel.com>
CC: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull vfs lseek fix from Al Viro:
"Fix proc_reg_llseek() breakage. Always had been possible if somebody
left NULL ->proc_lseek, became a practical issue now"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
take care to handle NULL ->proc_lseek()
|
|
Easily done now, just by clearing FMODE_LSEEK in ->f_mode
during proc_reg_open() for such entries.
Fixes: 868941b14441 "fs: remove no_llseek"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull more xen updates from Juergen Gross:
- fix the handling of the "persistent grants" feature negotiation
between Xen blkfront and Xen blkback drivers
- a cleanup of xen.config and adding xen.config to Xen section in
MAINTAINERS
- support HVMOP_set_evtchn_upcall_vector, which is more compliant to
"normal" interrupt handling than the global callback used up to now
- further small cleanups
* tag 'for-linus-6.0-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
MAINTAINERS: add xen config fragments to XEN HYPERVISOR sections
xen: remove XEN_SCRUB_PAGES in xen.config
xen/pciback: Fix comment typo
xen/xenbus: fix return type in xenbus_file_read()
xen-blkfront: Apply 'feature_persistent' parameter when connect
xen-blkback: Apply 'feature_persistent' parameter when connect
xen-blkback: fix persistent grants negotiation
x86/xen: Add support for HVMOP_set_evtchn_upcall_vector
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tool updates from Arnaldo Carvalho de Melo:
- 'perf c2c' now supports ARM64, adjust its output to cope with
differences with what is in x86_64. Now go find false sharing on
ARM64 (at least Neoverse) as well!
- Refactor the JSON processing, making the output more compact and thus
reducing the size of the resulting perf binary
- Improvements for 'perf offcpu' profiling, including tracking child
processes
- Update Intel JSON metrics and events files for broadwellde,
broadwellx, cascadelakex, haswellx, icelakex, ivytown, jaketown,
knightslanding, sapphirerapids, skylakex and snowridgex
- Add 'perf stat' JSON output and a 'perf test' entry for it
- Ignore memfd and anonymous mmap events if jitdump present
- Refactor 'perf test' shell tests allowing subdirs
- Fix an error handling path in 'parse_perf_probe_command()'
- Fixes for the guest Intel PT tracing patchkit in the 1st batch of
this merge window
- Print debuginfod queries if -v option is used, to explain delays in
processing when debuginfo servers are enabled to fetch DSOs with
richer symbol tables
- Improve error message for 'perf record -p not_existing_pid'
- Fix openssl and libbpf feature detection
- Add PMU pai_crypto event description for IBM z16 on 'perf list'
- Fix typos and duplicated words on comments in various places
* tag 'perf-tools-fixes-for-v6.0-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (81 commits)
perf test: Refactor shell tests allowing subdirs
perf vendor events: Update events for snowridgex
perf vendor events: Update events and metrics for skylakex
perf vendor events: Update metrics for sapphirerapids
perf vendor events: Update events for knightslanding
perf vendor events: Update metrics for jaketown
perf vendor events: Update metrics for ivytown
perf vendor events: Update events and metrics for icelakex
perf vendor events: Update events and metrics for haswellx
perf vendor events: Update events and metrics for cascadelakex
perf vendor events: Update events and metrics for broadwellx
perf vendor events: Update metrics for broadwellde
perf jevents: Fold strings optimization
perf jevents: Compress the pmu_events_table
perf metrics: Copy entire pmu_event in find metric
perf pmu-events: Hide the pmu_events
perf pmu-events: Don't assume pmu_event is an array
perf pmu-events: Move test events/metrics to JSON
perf test: Use full metric resolution
perf pmu-events: Hide pmu_events_map
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Ensure we never emit lwarx with EH=1 on 32-bit, because some 32-bit
CPUs trap on it rather than ignoring it as they should.
- Fix ftrace when building with clang, which was broken by some
refactoring.
- A couple of other minor fixes.
Thanks to Christophe Leroy, Naveen N. Rao, Nick Desaulniers, Ondrej
Mosnacek, Pali Rohár, Russell Currey, and Segher Boessenkool.
* tag 'powerpc-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/kexec: Fix build failure from uninitialised variable
powerpc/ppc-opcode: Fix PPC_RAW_TW()
powerpc64/ftrace: Fix ftrace for clang builds
powerpc: Make eh value more explicit when using lwarx
powerpc: Don't hide eh field of lwarx behind a macro
powerpc: Fix eh field when calling lwarx on PPC32
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull /proc/mounts fix from Al Viro:
"Fix for /proc/mounts escaping - escape the '#' character too"
* tag 'pull-work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: escape hash as well
|
|
git://git.samba.org/sfrench/cifs-2.6
Pull more cifs updates from Steve French:
- two fixes for stable, one for a lock length miscalculation, and
another fixes a lease break timeout bug
- improvement to handle leases, allows the close timeout to be
configured more safely
- five restructuring/cleanup patches
* tag '5.20-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Do not access tcon->cfids->cfid directly from is_path_accessible
cifs: Add constructor/destructors for tcon->cfid
SMB3: fix lease break timeout when multiple deferred close handles for the same file.
smb3: allow deferred close timeout to be configurable
cifs: Do not use tcon->cfid directly, use the cfid we get from open_cached_dir
cifs: Move cached-dir functions into a separate file
cifs: Remove {cifs,nfs}_fscache_release_page()
cifs: fix lock length calculation
|
|
Enable multipage folio support for the afs filesystem.
Support has already been implemented in netfslib, fscache and cachefiles
and in most of afs, but I've waited for Matthew Wilcox's latest folio
changes.
Note that it does require a change to afs_write_begin() to return the
correct subpage. This is a "temporary" change as we're working on
getting rid of the need for ->write_begin() and ->write_end()
completely, at least as far as network filesystems are concerned - but
it doesn't prevent afs from making use of the capability.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: kafs-testing@auristor.com
Cc: Marc Dionne <marc.dionne@auristor.com>
Cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/lkml/2274528.1645833226@warthog.procyon.org.uk/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
"Misc timer fixes:
- fix a potential use-after-free bug in posix timers
- correct a prototype
- address a build warning"
* tag 'timers-urgent-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-cpu-timers: Cleanup CPU timers before freeing them during exec
time: Correct the prototype of ns_to_kernel_old_timeval and ns_to_timespec64
posix-timers: Make do_clock_gettime() static
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"Fix the 'IBPB mitigated RETBleed' mode of operation on AMD CPUs (not
turned on by default), which also need STIBP enabled (if available) to
be '100% safe' on even the shortest speculation windows"
* tag 'x86-urgent-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Enable STIBP for IBPB mitigated RETBleed
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull more i2c updates from Wolfram Sang:
- two driver fixes for issues introduced this cycle
- one trivial driver improvement regarding ACPI
- more DTS conversion and additions
- documentation updates
- subsystem-wide move from strlcpy to strscpy
* tag 'i2c-for-5.20-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
docs: i2c: i2c-sysfs: fix hyperlinks
docs: i2c: i2c-sysfs: improve wording
docs: i2c: instantiating-devices: add syntax coloring to dts and C blocks
docs: i2c: smbus-protocol: improve DataLow/DataHigh definition
docs: i2c: i2c-protocol: remove unused legend items
docs: i2c: i2c-protocol,smbus-protocol: remove nonsense words
docs: i2c: i2c-protocol: update introductory paragraph
i2c: move core from strlcpy to strscpy
i2c: move drivers from strlcpy to strscpy
i2c: kempld: Support ACPI I2C device declaration
i2c: mediatek: add i2c compatible for MT8188
dt-bindings: i2c: update bindings for mt8188 soc
i2c: microchip-corei2c: fix erroneous late ack send
dt-bindings: i2c: qcom,i2c-cci: convert to dtschema
i2c: qcom-geni: Fix GPI DMA buffer sync-back
|
|
Pull NTB updates from Jon Mason:
"Non-Transparent Bridge updates.
Fix of heap data and clang warnings, support for a new Intel NTB
device, and NTB EndPoint Function (EPF) support and the various fixes
for that"
* tag 'ntb-5.20' of https://github.com/jonmason/ntb:
MAINTAINERS: add PCI Endpoint NTB drivers to NTB files
NTB: EPF: Tidy up some bounds checks
NTB: EPF: Fix error code in epf_ntb_bind()
PCI: endpoint: pci-epf-vntb: reduce several globals to statics
PCI: endpoint: pci-epf-vntb: fix error handle in epf_ntb_mw_bar_init()
PCI: endpoint: Fix Kconfig dependency
NTB: EPF: set pointer addr to null using NULL rather than 0
Documentation: PCI: extend subheading underline for "lspci output" section
Documentation: PCI: Use code-block block for scratchpad registers diagram
Documentation: PCI: Add specification for the PCI vNTB function device
PCI: endpoint: Support NTB transfer between RC and EP
NTB: epf: Allow more flexibility in the memory BAR map method
PCI: designware-ep: Allow pci_epc_set_bar() update inbound map address
ntb: intel: add GNR support for Intel PCIe gen5 NTB
NTB: ntb_tool: uninitialized heap data in tool_fn_write()
ntb: idt: fix clang -Wformat warnings
|
|
Pull more xfs updates from Darrick Wong:
"There's not a lot this time around, just the usual bug fixes and
corrections for missing error returns.
- Return error codes from block device flushes to userspace
- Fix a deadlock between reclaim and mount time quotacheck
- Fix an unnecessary ENOSPC return when doing COW on a filesystem
with severe free space fragmentation
- Fix a miscalculation in the transaction reservation computations
for file removal operations"
* tag 'xfs-5.20-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix inode reservation space for removing transaction
xfs: Fix false ENOSPC when performing direct write on a delalloc extent in cow fork
xfs: fix intermittent hang during quotacheck
xfs: check return codes when flushing block devices
|
|
Pull more SCSI updates from James Bottomley:
"Mostly small bug fixes and trivial updates.
The major new core update is a change to the way device, target and
host reference counting is done to try to make it more robust (this
change has soaked for a while to try to winkle out any bugs)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: pm8001: Fix typo 'the the' in comment
scsi: megaraid_sas: Remove redundant variable cmd_type
scsi: FlashPoint: Remove redundant variable bm_int_st
scsi: zfcp: Fix missing auto port scan and thus missing target ports
scsi: core: Call blk_mq_free_tag_set() earlier
scsi: core: Simplify LLD module reference counting
scsi: core: Make sure that hosts outlive targets
scsi: core: Make sure that targets outlive devices
scsi: ufs: ufs-pci: Correct check for RESET DSM
scsi: target: core: De-RCU of se_lun and se_lun acl
scsi: target: core: Fix race during ACL removal
scsi: ufs: core: Correct ufshcd_shutdown() flow
scsi: ufs: core: Increase the maximum data buffer size
scsi: lpfc: Check the return value of alloc_workqueue()
|
