Age | Commit message (Collapse) | Author |
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
- second part of the ucontrol selftest
- cpumodel sanity check selftest
- gen17 cpumodel changes
|
|
Check if the PFCR query reported in userspace coincides with the
kernel reported function list. Right now we don't mask the functions
in the kernel so they have to be the same.
Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Hariharan Mari <hari55@linux.ibm.com>
Link: https://lore.kernel.org/r/20241107152319.77816-5-brueckner@linux.ibm.com
[frankja@linux.ibm.com: Added commit description]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241107152319.77816-5-brueckner@linux.ibm.com>
|
|
Add gen17 facilities and let KVM_CAP_S390_VECTOR_REGISTERS handle
the enablement of the vector extension facilities.
Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20241107152319.77816-4-brueckner@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241107152319.77816-4-brueckner@linux.ibm.com>
|
|
Message-security-assist 11 introduces pckmo subfunctions to encrypt
hmac keys.
Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20241107152319.77816-3-brueckner@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241107152319.77816-3-brueckner@linux.ibm.com>
|
|
Adding support for concurrent-functions facility which provides
additional subfunctions.
Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20241107152319.77816-2-brueckner@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241107152319.77816-2-brueckner@linux.ibm.com>
|
|
The length of the interrupt parameters (IP) are:
a: 2 bytes
b: 4 bytes
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Link: https://lore.kernel.org/r/20241107141024.238916-6-schlameuss@linux.ibm.com
[frankja@linux.ibm.com: Fixed patch prefix]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241107141024.238916-6-schlameuss@linux.ibm.com>
|
|
Checkpatch thinks that we're doing a multiplication but we're obviously
not. Fix 4 instances where we adhered to wrong checkpatch advice.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20241107141024.238916-5-schlameuss@linux.ibm.com
[frankja@linux.ibm.com: Fixed patch prefix]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241107141024.238916-5-schlameuss@linux.ibm.com>
|
|
Add a test case verifying KVM_SET_USER_MEMORY_REGION and
KVM_SET_USER_MEMORY_REGION2 cannot be executed on ucontrol VMs.
Executing this test case on not patched kernels will cause a null
pointer dereference in the host kernel.
This is fixed with commit:
commit 7816e58967d0 ("kvm: s390: Reject memory region operations for ucontrol VMs")
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20241107141024.238916-4-schlameuss@linux.ibm.com
[frankja@linux.ibm.com: Fixed patch prefix]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241107141024.238916-4-schlameuss@linux.ibm.com>
|
|
Add a test case manipulating s390 storage keys from within the ucontrol
VM.
Storage key instruction (ISKE, SSKE and RRBE) intercepts and
Keyless-subset facility are disabled on first use, where the skeys are
setup by KVM in non ucontrol VMs.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Link: https://lore.kernel.org/r/20241108091620.289406-1-schlameuss@linux.ibm.com
Acked-by: Janosch Frank <frankja@linux.ibm.com>
[frankja@linux.ibm.com: Fixed patch prefix]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241108091620.289406-1-schlameuss@linux.ibm.com>
|
|
Add a test case verifying basic running and interaction of ucontrol VMs.
Fill the segment and page tables for allocated memory and map memory on
first access.
* uc_map_unmap
Store and load data to mapped and unmapped memory and use pic segment
translation handling to map memory on access.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link:
https://lore.kernel.org/r/20241107141024.238916-2-schlameuss@linux.ibm.com
[frankja@linux.ibm.com: Fixed patch prefix]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241107141024.238916-2-schlameuss@linux.ibm.com>
|
|
KVM/riscv changes for 6.13
- Accelerate KVM RISC-V when running as a guest
- Perf support to collect KVM guest statistics from host side
|
|
In kvm_riscv_vcpu_sbi_init() the entry->ext_idx can contain an
out-of-bound index. This is used as a special marker for the base
extensions, that cannot be disabled. However, when traversing the
extensions, that special marker is not checked prior indexing the
array.
Add an out-of-bounds check to the function.
Fixes: 56d8a385b605 ("RISC-V: KVM: Allow some SBI extensions to be disabled by default")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20241104191503.74725-1-bjorn@kernel.org
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
In the section "4.7 Precise effects on interrupt-pending bits"
of the RISC-V AIA specification defines that:
"If the source mode is Level1 or Level0 and the interrupt domain
is configured in MSI delivery mode (domaincfg.DM = 1):
The pending bit is cleared whenever the rectified input value is
low, when the interrupt is forwarded by MSI, or by a relevant
write to an in_clrip register or to clripnum."
Update the aplic_write_pending() to match the spec.
Fixes: d8dd9f113e16 ("RISC-V: KVM: Fix APLIC setipnum_le/be write emulation")
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20241029085542.30541-1-yongxuan.wang@sifive.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
When running under some other hypervisor, use SBI NACL based HFENCEs
for TLB shoot-down via KVM requests. This makes HFENCEs faster whenever
SBI nested acceleration is available.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20241020194734.58686-14-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Save trap CSRs in the kvm_riscv_vcpu_enter_exit() function instead of
the kvm_arch_vcpu_ioctl_run() function so that HTVAL and HTINST CSRs
are accessed in more optimized manner while running under some other
hypervisor.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20241020194734.58686-13-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Implement an optimized KVM world-switch using SBI sync SRET call
when SBI nested acceleration extension is available. This improves
KVM world-switch when KVM RISC-V is running as a Guest under some
other hypervisor.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20241020194734.58686-12-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
When running under some other hypervisor, prefer nacl_csr_xyz()
for accessing AIA CSRs in the run-loop. This makes CSR access
faster whenever SBI nested acceleration is available.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20241020194734.58686-11-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
When running under some other hypervisor, prefer nacl_csr_xyz()
for accessing H-extension CSRs in the run-loop. This makes CSR
access faster whenever SBI nested acceleration is available.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20241020194734.58686-10-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Add a common nested acceleration support which will be shared by
all parts of KVM RISC-V. This nested acceleration support detects
and enables SBI NACL extension usage based on static keys which
ensures minimum impact on the non-nested scenario.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20241020194734.58686-9-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Add defines for the new SBI nested acceleration extension which was
ratified as part of the SBI v2.0 specification.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20241020194734.58686-8-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
No need to setup SGEI local interrupt when there are zero guest
external interrupts (i.e. zero HW IMSIC guest files).
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20241020194734.58686-7-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The aia_set_hvictl() internally writes the HVICTL CSR which makes
it difficult to optimize the CSR write using SBI NACL extension for
kvm_riscv_vcpu_aia_update_hvip() function so replace aia_set_hvictl()
with new aia_hvictl_value() which only computes the HVICTL value.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20241020194734.58686-6-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Break down the __kvm_riscv_switch_to() function into macros so that
these macros can be later re-used by SBI NACL extension based low-level
switch function.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20241020194734.58686-5-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The SCOUNTEREN CSR need not be saved/restored in the low-level
__kvm_riscv_switch_to() function hence move the SCOUNTEREN CSR
save/restore to the kvm_riscv_vcpu_swap_in_guest_state() and
kvm_riscv_vcpu_swap_in_host_state() functions in C sources.
Also, re-arrange the CSR save/restore and related GPR usage in
the low-level __kvm_riscv_switch_to() low-level function.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20241020194734.58686-4-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
We will be optimizing HSTATUS CSR access via shared memory setup
using the SBI nested acceleration extension. To facilitate this,
we first move HSTATUS save/restore in kvm_riscv_vcpu_enter_exit().
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20241020194734.58686-3-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Order the object files alphabetically in the Makefile so that
it is very predictable inserting new object files in the future.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20241020194734.58686-2-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
For the information collected on the host side, we need to
identify which data originates from the guest and record
these events separately, this can be achieved by having
KVM register perf callbacks.
Signed-off-by: Quan Zhou <zhouquan@iscas.ac.cn>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/00342d535311eb0629b9ba4f1e457a48e2abee33.1728957131.git.zhouquan@iscas.ac.cn
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Introduce basic guest support in perf, enabling it to distinguish
between PMU interrupts in the host or guest, and collect
fundamental information.
Signed-off-by: Quan Zhou <zhouquan@iscas.ac.cn>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/a67d527dc1b11493fe11f7f53584772fdd983744.1728957131.git.zhouquan@iscas.ac.cn
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Prevent a certain range of pages which get marked as hypervisor-only,
to get allocated to a CoCo (SNP) guest which cannot use them and thus
fail booting
- Fix the microcode loader on AMD to pay attention to the stepping of a
patch and to handle the case where a BIOS config option splits the
machine into logical NUMA nodes per L3 cache slice
- Disable LAM from being built by default due to security concerns
* tag 'x86_urgent_for_v6.12_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Ensure that RMP table fixups are reserved
x86/microcode/AMD: Split load_microcode_amd()
x86/microcode/AMD: Pay attention to the stepping dynamically
x86/lam: Disable ADDRESS_MASKING in most cases
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ftrace fixes from Steven Rostedt:
- Fix missing mutex unlock in error path of register_ftrace_graph()
A previous fix added a return on an error path and forgot to unlock
the mutex. Instead of dealing with error paths, use guard(mutex) as
the mutex is just released at the exit of the function anyway. Other
functions in this file should be updated with this, but that's a
cleanup and not a fix.
- Change cpuhp setup name to be consistent with other cpuhp states
The same fix that the above patch fixes added a cpuhp_setup_state()
call with the name of "fgraph_idle_init". I was informed that it
should instead be something like: "fgraph:online". Update that too.
* tag 'ftrace-v6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
fgraph: Change the name of cpuhp state to "fgraph:online"
fgraph: Fix missing unlock in register_ftrace_graph()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- Asus thermal profile fix, fixing performance issues on Lunar Lake
- Intel PMC: one revert for a lockdep issue and one bugfix
- Dell WMI: Ignore some WMI events on suspend/resume to silence warnings
* tag 'platform-drivers-x86-v6.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: asus-wmi: Fix thermal profile initialization
platform/x86: dell-wmi: Ignore suspend notifications
platform/x86/intel/pmc: Fix pmc_core_iounmap to call iounmap for valid addresses
platform/x86:intel/pmc: Revert "Enable the ACPI PM Timer to be turned off when suspended"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fix from Takashi Sakamoto:
"A single commit to resolve a regression existing in v6.11 or later.
The change in 1394 OHCI driver in v6.11 kernel could cause general
protection faults when rediscovering nodes in IEEE 1394 bus while
holding a spin lock. Consequently, watchdog checks can report a hard
lockup.
Currently, this issue is observed primarily during the system resume
phase when using an extra node with three ports or more is used.
However, it could potentially occur in the other cases as well"
* tag 'firewire-fixes-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: fix invalid port index for parent device
|
|
Pull block fixes from Jens Axboe:
- Pull request for MD via Song fixing a few issues
- Fix a wrong check in blk_rq_map_user_bvec(), causing IO errors on
passthrough IO (Xinyu)
* tag 'block-6.12-20241026' of git://git.kernel.dk/linux:
block: fix sanity checks in blk_rq_map_user_bvec
md/raid10: fix null ptr dereference in raid10_size()
md: ensure child flush IO does not affect origin bio->bi_status
|
|
Pull xfs fixes from Carlos Maiolino:
- Fix recovery of allocator ops after a growfs
- Do not fail repairs on metadata files with no attr fork
* tag 'xfs-6.12-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: update the pag for the last AG at recovery time
xfs: don't use __GFP_RETRY_MAYFAIL in xfs_initialize_perag
xfs: error out when a superblock buffer update reduces the agcount
xfs: update the file system geometry after recoverying superblock buffers
xfs: merge the perag freeing helpers
xfs: pass the exact range to initialize to xfs_initialize_perag
xfs: don't fail repairs on metadata files with no attr fork
|
|
In a commit 24b7f8e5cd65 ("firewire: core: use helper functions for self
ID sequence"), the enumeration over self ID sequence was refactored with
some helper functions with KUnit tests. These helper functions are
guaranteed to work expectedly by the KUnit tests, however their application
includes a mistake to assign invalid value to the index of port connected
to parent device.
This bug affects the case that any extra node devices which has three or
more ports are connected to 1394 OHCI controller. In the case, the path
to update the tree cache could hits WARN_ON(), and gets general protection
fault due to the access to invalid address computed by the invalid value.
This commit fixes the bug to assign correct port index.
Cc: stable@vger.kernel.org
Reported-by: Edmund Raile <edmund.raile@proton.me>
Closes: https://lore.kernel.org/lkml/8a9902a4ece9329af1e1e42f5fea76861f0bf0e8.camel@proton.me/
Fixes: 24b7f8e5cd65 ("firewire: core: use helper functions for self ID sequence")
Link: https://lore.kernel.org/r/20241025034137.99317-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
When support for vivobook fan profiles was added, the initial
call to throttle_thermal_policy_set_default() was removed, which
however is necessary for full initialization.
Fix this by calling throttle_thermal_policy_set_default() again
when setting up the platform profile.
Fixes: bcbfcebda2cb ("platform/x86: asus-wmi: add support for vivobook fan profiles")
Reported-by: Michael Larabel <Michael@phoronix.com>
Closes: https://www.phoronix.com/review/lunar-lake-xe2/5
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241025191514.15032-2-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Pull more 9p reverts from Dominique Martinet:
"Revert patches causing inode collision problems.
The code simplification introduced significant regressions on servers
that do not remap inode numbers when exporting multiple underlying
filesystems with colliding inodes. See the top-most revert (commit
be2ca3825372) for details.
This problem had been ignored for too long and the reverts will also
head to stable (6.9+).
I'm confident this set of patches gets us back to previous behaviour
(another related patch had already been reverted back in April and
we're almost back to square 1, and the rest didn't touch inode
lifecycle)"
* tag '9p-for-6.12-rc5' of https://github.com/martinetd/linux:
Revert "fs/9p: simplify iget to remove unnecessary paths"
Revert "fs/9p: fix uaf in in v9fs_stat2inode_dotl"
Revert "fs/9p: remove redundant pointer v9ses"
Revert " fs/9p: mitigate inode collisions"
|
|
Pull smb client fixes from Steve French:
- Fix init module error caseb
- Fix memory allocation error path (for passwords) in mount
* tag 'v6.12-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix warning when destroy 'cifs_io_request_pool'
smb: client: Handle kstrdup failures for passwords
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
- Fix cached size after passthrough writes
This fix needed a trivial change in the backing-file API, which
resulted in some non-fuse files being touched.
- Revert a commit meant as a cleanup but which triggered a WARNING
- Remove a stray debug line left-over
* tag 'fuse-fixes-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: remove stray debug line
Revert "fuse: move initialization of fuse_file to fuse_writepages() instead of in callback"
fuse: update inode size after extending passthrough write
fs: pass offset and result to backing_file end_write() callback
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Fix a couple of use-after-free bugs
* tag 'nfsd-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: cancel nfsd_shrinker_work using sync mode in nfs4_state_shutdown_net
nfsd: fix race between laundromat and free_stateid
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix an ACPI PRM (Platform Runtime Mechanism) issue and add two
new DMI quirks, one for an ACPI IRQ override and one for lid switch
detection:
- Make acpi_parse_prmt() look for EFI_MEMORY_RUNTIME memory regions
only to comply with the UEFI specification and make PRM use
efi_guid_t instead of guid_t to avoid a compiler warning triggered
by that change (Koba Ko, Dan Carpenter)
- Add an ACPI IRQ override quirk for LG 16T90SP (Christian Heusel)
- Add a lid switch detection quirk for Samsung Galaxy Book2 (Shubham
Panwar)"
* tag 'acpi-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PRM: Clean up guid type in struct prm_handler_info
ACPI: button: Add DMI quirk for Samsung Galaxy Book2 to fix initial lid detection issue
ACPI: resource: Add LG 16T90SP to irq1_level_low_skip_override[]
ACPI: PRM: Find EFI_MEMORY_RUNTIME block for PRM handler and context
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Update cpufreq documentation to match the code after recent changes
(Christian Loehle), fix a units conversion issue in the CPPC cpufreq
driver (liwei), and fix an error check in the dtpm_devfreq power
capping driver (Yuan Can)"
* tag 'pm-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: CPPC: fix perf_to_khz/khz_to_perf conversion exception
powercap: dtpm_devfreq: Fix error check against dev_pm_qos_add_request()
cpufreq: docs: Reflect latency changes in docs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Hold the rescan lock while adding devices to avoid race with
concurrent pwrctl rescan that can lead to a crash (Bartosz
Golaszewski)
- Avoid binding pwrctl driver to QCom WCN wifi if the DT lacks the
necessary PMU regulator descriptions (Bartosz Golaszewski)
* tag 'pci-v6.12-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/pwrctl: Abandon QCom WCN probe on pre-pwrseq device-trees
PCI: Hold rescan lock while adding devices during host probe
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes from Helge Deller:
- Fix some build warnings and failures with CONFIG_FB_IOMEM_FOPS and
CONFIG_FB_DEVICE
- Remove the da8xx fbdev driver
- Constify struct sbus_mmap_map and fix indentation warning
* tag 'fbdev-for-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: wm8505fb: select CONFIG_FB_IOMEM_FOPS
fbdev: da8xx: remove the driver
fbdev: Constify struct sbus_mmap_map
fbdev: nvidiafb: fix inconsistent indentation warning
fbdev: sstfb: Make CONFIG_FB_DEVICE optional
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fix from Bartosz Golaszewski:
"Update MAINTAINERS with a keyword pattern for legacy GPIO API
The goal is to alert us to anyone trying to use the deprecated, legacy
API (this happens almost every release)"
* tag 'gpio-fixes-for-v6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
MAINTAINERS: add a keyword entry for the GPIO subsystem
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Niklas Cassel:
- Fix the handling of ATA commands that timeout (command that did not
receive a completion interrupt within the configured timeout time).
Commands that timeout, while also having either the FAILFAST flag
set, or the command being a passthrough command, should never be
retried. Restore this behavior (as it was before v6.12-rc1).
* tag 'ata-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata: Set DID_TIME_OUT for commands that actually timed out
|
|
TL;DR: Eliminate KVM's long-standing (and heinous) behavior of essentially
guessing which pfns are refcounted pages (see kvm_pfn_to_refcounted_page()).
Getting there requires "fixing" arch code that isn't obviously broken.
Specifically, to get rid of kvm_pfn_to_refcounted_page(), KVM needs to
stop marking pages/folios dirty/accessed based solely on the pfn that's
stored in KVM's stage-2 page tables.
Instead of tracking which SPTEs correspond to refcounted pages, simply
remove all of the code that operates on "struct page" based ona the pfn
in stage-2 PTEs. This is the back ~40-50% of the series.
For x86 in particular, which sets accessed/dirty status when that info
would be "lost", e.g. when SPTEs are zapped or KVM clears the dirty flag
in a SPTE, foregoing the updates provides very measurable performance
improvements for related operations. E.g. when clearing dirty bits as
part of dirty logging, and zapping SPTEs to reconstitue huge pages when
disabling dirty logging.
The front ~40% of the series is cleanups and prep work, and most of it is
x86 focused (purely because x86 added the most special cases, *sigh*).
E.g. several of the inputs to hva_to_pfn() (and it's myriad wrappers),
can be removed by cleaning up and deduplicating x86 code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The majority of changes here are about ASoC.
There are two core changes in ASoC (the bump of minimal topology ABI
version and the fix for references of components in DAPM code), and
others are mostly various device-specific fixes for SoundWire, AMD,
Intel, SOF, Qualcomm and FSL, in addition to a few usual HD-audio
quirks and fixes"
* tag 'sound-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (33 commits)
ALSA: hda/realtek: Update default depop procedure
ASoC: qcom: sc7280: Fix missing Soundwire runtime stream alloc
ASoC: fsl_micfil: Add sample rate constraint
ASoC: rt722-sdca: increase clk_stop_timeout to fix clock stop issue
ALSA: hda/tas2781: select CRC32 instead of CRC32_SARWATE
ALSA: hda/realtek: Add subwoofer quirk for Acer Predator G9-593
ALSA: firewire-lib: Avoid division by zero in apply_constraint_to_size()
ASoC: fsl_micfil: Add a flag to distinguish with different volume control types
ASoC: codecs: lpass-rx-macro: fix RXn(rx,n) macro for DSM_CTL and SEC7 regs
ASoC: Change my e-mail to gmail
ASoC: Intel: soc-acpi: lnl: Add match entry for TM2 laptops
ASoC: amd: yc: Fix non-functional mic on ASUS E1404FA
ASoC: SOF: Intel: hda: Always clean up link DMA during stop
soundwire: intel_ace2x: Send PDI stream number during prepare
ASoC: SOF: Intel: hda: Handle prepare without close for non-HDA DAI's
ASoC: SOF: ipc4-topology: Do not set ALH node_id for aggregated DAIs
MAINTAINERS: Update maintainer list for MICROCHIP ASOC, SSC and MCP16502 drivers
ASoC: qcom: Select missing common Soundwire module code on SDM845
ASoC: fsl_esai: change dev_warn to dev_dbg in irq handler
ASoC: rsnd: Fix probe failure on HiHope boards due to endpoint parsing
...
|
|
Pull drm fixes from Dave Airlie:
"Weekly drm fixes, mostly amdgpu and xe, with minor bridge and an i915
Kconfig fix. Nothing too scary and it seems to be pretty quiet.
amdgpu:
- ACPI method handling fixes
- SMU 14.x fixes
- Display idle optimization fix
- DP link layer compliance fix
- SDMA 7.x fix
- PSR-SU fix
- SWSMU fix
i915:
- Fix DRM_I915_GVT_KVMGT dependencies in Kconfig
xe:
- Increase invalidation timeout to avoid errors in some hosts
- Flush worker on timeout
- Better handling for force wake failure
- Improve argument check on user fence creation
- Don't restart parallel queues multiple times on GT reset
bridge:
- aux: Fix assignment of OF node
- tc358767: Add missing of_node_put() in error path"
* tag 'drm-fixes-2024-10-25' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe: Don't restart parallel queues multiple times on GT reset
drm/xe/ufence: Prefetch ufence addr to catch bogus address
drm/xe: Handle unreliable MMIO reads during forcewake
drm/xe/guc/ct: Flush g2h worker in case of g2h response timeout
drm/xe: Enlarge the invalidation timeout from 150 to 500
drm/amdgpu: handle default profile on on devices without fullscreen 3D
drm/amd/display: Disable PSR-SU on Parade 08-01 TCON too
drm/amdgpu: fix random data corruption for sdma 7
drm/amd/display: temp w/a for DP Link Layer compliance
drm/amd/display: temp w/a for dGPU to enter idle optimizations
drm/amd/pm: update deep sleep status on smu v14.0.2/3
drm/amd/pm: update overdrive function on smu v14.0.2/3
drm/amd/pm: update the driver-fw interface file for smu v14.0.2/3
drm/amd: Guard against bad data for ATIF ACPI method
drm/bridge: tc358767: fix missing of_node_put() in for_each_endpoint_of_node()
drm/bridge: Fix assignment of the of_node of the parent to aux bridge
i915: fix DRM_I915_GVT_KVMGT dependencies
|