summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c')
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c121
1 files changed, 60 insertions, 61 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index e81a747ea8ce..4902d1eb3d1e 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -75,8 +75,6 @@
#define FW_FILE_NAME_E1H "bnx2x/bnx2x-e1h-" FW_FILE_VERSION ".fw"
#define FW_FILE_NAME_E2 "bnx2x/bnx2x-e2-" FW_FILE_VERSION ".fw"
-#define MAC_LEADING_ZERO_CNT (ALIGN(ETH_ALEN, sizeof(u32)) - ETH_ALEN)
-
/* Time in jiffies before concluding the transmitter is hung */
#define TX_TIMEOUT (5*HZ)
@@ -2955,14 +2953,15 @@ static unsigned long bnx2x_get_common_flags(struct bnx2x *bp,
__set_bit(BNX2X_Q_FLG_ACTIVE, &flags);
/* tx only connections collect statistics (on the same index as the
- * parent connection). The statistics are zeroed when the parent
- * connection is initialized.
+ * parent connection). The statistics are zeroed when the parent
+ * connection is initialized.
*/
__set_bit(BNX2X_Q_FLG_STATS, &flags);
if (zero_stats)
__set_bit(BNX2X_Q_FLG_ZERO_STATS, &flags);
+ __set_bit(BNX2X_Q_FLG_PCSUM_ON_PKT, &flags);
#ifdef BNX2X_STOP_ON_ERROR
__set_bit(BNX2X_Q_FLG_TX_SEC, &flags);
@@ -3227,16 +3226,29 @@ static void bnx2x_drv_info_ether_stat(struct bnx2x *bp)
{
struct eth_stats_info *ether_stat =
&bp->slowpath->drv_info_to_mcp.ether_stat;
+ struct bnx2x_vlan_mac_obj *mac_obj =
+ &bp->sp_objs->mac_obj;
+ int i;
strlcpy(ether_stat->version, DRV_MODULE_VERSION,
ETH_STAT_INFO_VERSION_LEN);
- bp->sp_objs[0].mac_obj.get_n_elements(bp, &bp->sp_objs[0].mac_obj,
- DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED,
- ether_stat->mac_local);
-
+ /* get DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED macs, placing them in the
+ * mac_local field in ether_stat struct. The base address is offset by 2
+ * bytes to account for the field being 8 bytes but a mac address is
+ * only 6 bytes. Likewise, the stride for the get_n_elements function is
+ * 2 bytes to compensate from the 6 bytes of a mac to the 8 bytes
+ * allocated by the ether_stat struct, so the macs will land in their
+ * proper positions.
+ */
+ for (i = 0; i < DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED; i++)
+ memset(ether_stat->mac_local + i, 0,
+ sizeof(ether_stat->mac_local[0]));
+ mac_obj->get_n_elements(bp, &bp->sp_objs[0].mac_obj,
+ DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED,
+ ether_stat->mac_local + MAC_PAD, MAC_PAD,
+ ETH_ALEN);
ether_stat->mtu_size = bp->dev->mtu;
-
if (bp->dev->features & NETIF_F_RXCSUM)
ether_stat->feature_flags |= FEATURE_ETH_CHKSUM_OFFLOAD_MASK;
if (bp->dev->features & NETIF_F_TSO)
@@ -3258,8 +3270,7 @@ static void bnx2x_drv_info_fcoe_stat(struct bnx2x *bp)
if (!CNIC_LOADED(bp))
return;
- memcpy(fcoe_stat->mac_local + MAC_LEADING_ZERO_CNT,
- bp->fip_mac, ETH_ALEN);
+ memcpy(fcoe_stat->mac_local + MAC_PAD, bp->fip_mac, ETH_ALEN);
fcoe_stat->qos_priority =
app->traffic_type_priority[LLFC_TRAFFIC_TYPE_FCOE];
@@ -3361,8 +3372,8 @@ static void bnx2x_drv_info_iscsi_stat(struct bnx2x *bp)
if (!CNIC_LOADED(bp))
return;
- memcpy(iscsi_stat->mac_local + MAC_LEADING_ZERO_CNT,
- bp->cnic_eth_dev.iscsi_mac, ETH_ALEN);
+ memcpy(iscsi_stat->mac_local + MAC_PAD, bp->cnic_eth_dev.iscsi_mac,
+ ETH_ALEN);
iscsi_stat->qos_priority =
app->traffic_type_priority[LLFC_TRAFFIC_TYPE_ISCSI];
@@ -9525,6 +9536,10 @@ sp_rtnl_not_reset:
bnx2x_vfpf_storm_rx_mode(bp);
}
+ if (test_and_clear_bit(BNX2X_SP_RTNL_HYPERVISOR_VLAN,
+ &bp->sp_rtnl_state))
+ bnx2x_pf_set_vfs_vlan(bp);
+
/* work which needs rtnl lock not-taken (as it takes the lock itself and
* can be called from other contexts as well)
*/
@@ -9532,8 +9547,10 @@ sp_rtnl_not_reset:
/* enable SR-IOV if applicable */
if (IS_SRIOV(bp) && test_and_clear_bit(BNX2X_SP_RTNL_ENABLE_SRIOV,
- &bp->sp_rtnl_state))
+ &bp->sp_rtnl_state)) {
+ bnx2x_disable_sriov(bp);
bnx2x_enable_sriov(bp);
+ }
}
static void bnx2x_period_task(struct work_struct *work)
@@ -10034,8 +10051,12 @@ static void bnx2x_get_common_hwinfo(struct bnx2x *bp)
id = ((val & 0xffff) << 16);
val = REG_RD(bp, MISC_REG_CHIP_REV);
id |= ((val & 0xf) << 12);
- val = REG_RD(bp, MISC_REG_CHIP_METAL);
- id |= ((val & 0xff) << 4);
+
+ /* Metal is read from PCI regs, but we can't access >=0x400 from
+ * the configuration space (so we need to reg_rd)
+ */
+ val = REG_RD(bp, PCICFG_OFFSET + PCI_ID_VAL3);
+ id |= (((val >> 24) & 0xf) << 4);
val = REG_RD(bp, MISC_REG_BOND_ID);
id |= (val & 0xf);
bp->common.chip_id = id;
@@ -10812,14 +10833,12 @@ static void bnx2x_get_cnic_mac_hwinfo(struct bnx2x *bp)
}
}
- if (IS_MF_STORAGE_SD(bp))
- /* Zero primary MAC configuration */
- memset(bp->dev->dev_addr, 0, ETH_ALEN);
-
- if (IS_MF_FCOE_AFEX(bp) || IS_MF_FCOE_SD(bp))
- /* use FIP MAC as primary MAC */
+ /* If this is a storage-only interface, use SAN mac as
+ * primary MAC. Notice that for SD this is already the case,
+ * as the SAN mac was copied from the primary MAC.
+ */
+ if (IS_MF_FCOE_AFEX(bp))
memcpy(bp->dev->dev_addr, fip_mac, ETH_ALEN);
-
} else {
val2 = SHMEM_RD(bp, dev_info.port_hw_config[port].
iscsi_mac_upper);
@@ -11056,6 +11075,9 @@ static int bnx2x_get_hwinfo(struct bnx2x *bp)
} else
BNX2X_DEV_INFO("illegal OV for SD\n");
break;
+ case SHARED_FEAT_CFG_FORCE_SF_MODE_FORCED_SF:
+ bp->mf_config[vn] = 0;
+ break;
default:
/* Unknown configuration: reset mf_config */
bp->mf_config[vn] = 0;
@@ -11402,26 +11424,6 @@ static int bnx2x_init_bp(struct bnx2x *bp)
* net_device service functions
*/
-static int bnx2x_open_epilog(struct bnx2x *bp)
-{
- /* Enable sriov via delayed work. This must be done via delayed work
- * because it causes the probe of the vf devices to be run, which invoke
- * register_netdevice which must have rtnl lock taken. As we are holding
- * the lock right now, that could only work if the probe would not take
- * the lock. However, as the probe of the vf may be called from other
- * contexts as well (such as passthrough to vm failes) it can't assume
- * the lock is being held for it. Using delayed work here allows the
- * probe code to simply take the lock (i.e. wait for it to be released
- * if it is being held).
- */
- smp_mb__before_clear_bit();
- set_bit(BNX2X_SP_RTNL_ENABLE_SRIOV, &bp->sp_rtnl_state);
- smp_mb__after_clear_bit();
- schedule_delayed_work(&bp->sp_rtnl_task, 0);
-
- return 0;
-}
-
/* called with rtnl_lock */
static int bnx2x_open(struct net_device *dev)
{
@@ -11791,6 +11793,8 @@ static const struct net_device_ops bnx2x_netdev_ops = {
.ndo_setup_tc = bnx2x_setup_tc,
#ifdef CONFIG_BNX2X_SRIOV
.ndo_set_vf_mac = bnx2x_set_vf_mac,
+ .ndo_set_vf_vlan = bnx2x_set_vf_vlan,
+ .ndo_get_vf_config = bnx2x_get_vf_config,
#endif
#ifdef NETDEV_FCOE_WWNN
.ndo_fcoe_get_wwn = bnx2x_fcoe_get_wwn,
@@ -11953,7 +11957,7 @@ static int bnx2x_init_dev(struct bnx2x *bp, struct pci_dev *pdev,
dev->watchdog_timeo = TX_TIMEOUT;
dev->netdev_ops = &bnx2x_netdev_ops;
- bnx2x_set_ethtool_ops(dev);
+ bnx2x_set_ethtool_ops(bp, dev);
dev->priv_flags |= IFF_UNICAST_FLT;
@@ -11961,6 +11965,13 @@ static int bnx2x_init_dev(struct bnx2x *bp, struct pci_dev *pdev,
NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 |
NETIF_F_RXCSUM | NETIF_F_LRO | NETIF_F_GRO |
NETIF_F_RXHASH | NETIF_F_HW_VLAN_TX;
+ if (!CHIP_IS_E1x(bp)) {
+ dev->hw_features |= NETIF_F_GSO_GRE;
+ dev->hw_enc_features =
+ NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | NETIF_F_SG |
+ NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 |
+ NETIF_F_GSO_GRE;
+ }
dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 | NETIF_F_HIGHDMA;
@@ -12475,13 +12486,8 @@ static int bnx2x_init_one(struct pci_dev *pdev,
goto init_one_exit;
}
- /* Enable SRIOV if capability found in configuration space.
- * Once the generic SR-IOV framework makes it in from the
- * pci tree this will be revised, to allow dynamic control
- * over the number of VFs. Right now, change the num of vfs
- * param below to enable SR-IOV.
- */
- rc = bnx2x_iov_init_one(bp, int_mode, 0/*num vfs*/);
+ /* Enable SRIOV if capability found in configuration space */
+ rc = bnx2x_iov_init_one(bp, int_mode, BNX2X_MAX_NUM_OF_VFS);
if (rc)
goto init_one_exit;
@@ -12493,16 +12499,6 @@ static int bnx2x_init_one(struct pci_dev *pdev,
if (CHIP_IS_E1x(bp))
bp->flags |= NO_FCOE_FLAG;
- /* disable FCOE for 57840 device, until FW supports it */
- switch (ent->driver_data) {
- case BCM57840_O:
- case BCM57840_4_10:
- case BCM57840_2_20:
- case BCM57840_MFO:
- case BCM57840_MF:
- bp->flags |= NO_FCOE_FLAG;
- }
-
/* Set bp->num_queues for MSI-X mode*/
bnx2x_set_num_queues(bp);
@@ -12797,6 +12793,9 @@ static struct pci_driver bnx2x_pci_driver = {
.suspend = bnx2x_suspend,
.resume = bnx2x_resume,
.err_handler = &bnx2x_err_handler,
+#ifdef CONFIG_BNX2X_SRIOV
+ .sriov_configure = bnx2x_sriov_configure,
+#endif
};
static int __init bnx2x_init(void)
generated by cgit v1.2.3 (git 2.25.1) at 2025-04-11 10:28:49 +0000