14 files changed, 1418 insertions, 299 deletions
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index b48ca6039d83..e599ae2a5de4 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -5,7 +5,7 @@
 # Common support
 obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o pm.o
 
-omap-2-3-common				= irq.o sdrc.o
+omap-2-3-common				= irq.o sdrc.o prm2xxx_3xxx.o
 hwmod-common				= omap_hwmod.o \
 					  omap_hwmod_common_data.o
 prcm-common				= prcm.o powerdomain.o
@@ -15,7 +15,7 @@ clock-common				= clock.o clock_common_data.o \
 
 obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(hwmod-common)
 obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(hwmod-common)
-obj-$(CONFIG_ARCH_OMAP4) += $(prcm-common) $(hwmod-common)
+obj-$(CONFIG_ARCH_OMAP4) += $(prcm-common) prm44xx.o $(hwmod-common)
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 
@@ -91,6 +91,7 @@ obj-$(CONFIG_ARCH_OMAP2430)		+= opp2430_data.o
 obj-$(CONFIG_ARCH_OMAP2420)		+= omap_hwmod_2420_data.o
 obj-$(CONFIG_ARCH_OMAP2430)		+= omap_hwmod_2430_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= omap_hwmod_3xxx_data.o
+obj-$(CONFIG_ARCH_OMAP4)		+= omap_hwmod_44xx_data.o
 
 # EMU peripherals
 obj-$(CONFIG_OMAP3_EMU)			+= emu.o
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index 5d80cb897489..6fb61b1a0d46 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -258,97 +258,6 @@ static void _omap2_clkdm_set_hwsup(struct clockdomain *clkdm, int enable)
 
 }
 
-/**
- * _init_wkdep_usecount - initialize wkdep usecounts to match hardware
- * @clkdm: clockdomain to initialize wkdep usecounts
- *
- * Initialize the wakeup dependency usecount variables for clockdomain @clkdm.
- * If a wakeup dependency is present in the hardware, the usecount will be
- * set to 1; otherwise, it will be set to 0.  Software should clear all
- * software wakeup dependencies prior to calling this function if it wishes
- * to ensure that all usecounts start at 0.  No return value.
- */
-static void _init_wkdep_usecount(struct clockdomain *clkdm)
-{
-	u32 v;
-	struct clkdm_dep *cd;
-
-	if (!clkdm->wkdep_srcs)
-		return;
-
-	for (cd = clkdm->wkdep_srcs; cd->clkdm_name; cd++) {
-		if (!omap_chip_is(cd->omap_chip))
-			continue;
-
-		if (!cd->clkdm && cd->clkdm_name)
-			cd->clkdm = _clkdm_lookup(cd->clkdm_name);
-
-		if (!cd->clkdm) {
-			WARN(!cd->clkdm, "clockdomain: %s: wkdep clkdm %s not "
-			     "found\n", clkdm->name, cd->clkdm_name);
-			continue;
-		}
-
-		v = prm_read_mod_bits_shift(clkdm->pwrdm.ptr->prcm_offs,
-					    PM_WKDEP,
-					    (1 << cd->clkdm->dep_bit));
-
-		if (v)
-			pr_debug("clockdomain: %s: wakeup dependency already "
-				 "set to wake up when %s wakes\n",
-				 clkdm->name, cd->clkdm->name);
-
-		atomic_set(&cd->wkdep_usecount, (v) ? 1 : 0);
-	}
-}
-
-/**
- * _init_sleepdep_usecount - initialize sleepdep usecounts to match hardware
- * @clkdm: clockdomain to initialize sleepdep usecounts
- *
- * Initialize the sleep dependency usecount variables for clockdomain @clkdm.
- * If a sleep dependency is present in the hardware, the usecount will be
- * set to 1; otherwise, it will be set to 0.  Software should clear all
- * software sleep dependencies prior to calling this function if it wishes
- * to ensure that all usecounts start at 0.  No return value.
- */
-static void _init_sleepdep_usecount(struct clockdomain *clkdm)
-{
-	u32 v;
-	struct clkdm_dep *cd;
-
-	if (!cpu_is_omap34xx())
-		return;
-
-	if (!clkdm->sleepdep_srcs)
-		return;
-
-	for (cd = clkdm->sleepdep_srcs; cd->clkdm_name; cd++) {
-		if (!omap_chip_is(cd->omap_chip))
-			continue;
-
-		if (!cd->clkdm && cd->clkdm_name)
-			cd->clkdm = _clkdm_lookup(cd->clkdm_name);
-
-		if (!cd->clkdm) {
-			WARN(!cd->clkdm, "clockdomain: %s: sleepdep clkdm %s "
-			     "not found\n", clkdm->name, cd->clkdm_name);
-			continue;
-		}
-
-		v = prm_read_mod_bits_shift(clkdm->pwrdm.ptr->prcm_offs,
-					    OMAP3430_CM_SLEEPDEP,
-					    (1 << cd->clkdm->dep_bit));
-
-		if (v)
-			pr_debug("clockdomain: %s: sleep dependency already "
-				 "set to prevent from idling until %s "
-				 "idles\n", clkdm->name, cd->clkdm->name);
-
-		atomic_set(&cd->sleepdep_usecount, (v) ? 1 : 0);
-	}
-};
-
 /* Public functions */
 
 /**
@@ -379,12 +288,17 @@ void clkdm_init(struct clockdomain **clkdms,
 			_autodep_lookup(autodep);
 
 	/*
-	 * Ensure that the *dep_usecount registers reflect the current
-	 * state of the PRCM.
+	 * Put all clockdomains into software-supervised mode; PM code
+	 * should later enable hardware-supervised mode as appropriate
 	 */
 	list_for_each_entry(clkdm, &clkdm_list, node) {
-		_init_wkdep_usecount(clkdm);
-		_init_sleepdep_usecount(clkdm);
+		if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+			omap2_clkdm_wakeup(clkdm);
+		else if (clkdm->flags & CLKDM_CAN_DISABLE_AUTO)
+			omap2_clkdm_deny_idle(clkdm);
+
+		clkdm_clear_all_wkdeps(clkdm);
+		clkdm_clear_all_sleepdeps(clkdm);
 	}
 }
 
@@ -592,6 +506,9 @@ int clkdm_clear_all_wkdeps(struct clockdomain *clkdm)
 		if (!omap_chip_is(cd->omap_chip))
 			continue;
 
+		if (!cd->clkdm && cd->clkdm_name)
+			cd->clkdm = _clkdm_lookup(cd->clkdm_name);
+
 		/* PRM accesses are slow, so minimize them */
 		mask |= 1 << cd->clkdm->dep_bit;
 		atomic_set(&cd->wkdep_usecount, 0);
@@ -752,6 +669,9 @@ int clkdm_clear_all_sleepdeps(struct clockdomain *clkdm)
 		if (!omap_chip_is(cd->omap_chip))
 			continue;
 
+		if (!cd->clkdm && cd->clkdm_name)
+			cd->clkdm = _clkdm_lookup(cd->clkdm_name);
+
 		/* PRM accesses are slow, so minimize them */
 		mask |= 1 << cd->clkdm->dep_bit;
 		atomic_set(&cd->sleepdep_usecount, 0);
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index 3d3d035db9af..8ea012ef0b5a 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -60,7 +60,8 @@ struct omap3_processor_cx {
 
 struct omap3_processor_cx omap3_power_states[OMAP3_MAX_STATES];
 struct omap3_processor_cx current_cx_state;
-struct powerdomain *mpu_pd, *core_pd;
+struct powerdomain *mpu_pd, *core_pd, *per_pd;
+struct powerdomain *cam_pd;
 
 /*
  * The latencies/thresholds for various C states have
@@ -233,14 +234,62 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev,
 			       struct cpuidle_state *state)
 {
 	struct cpuidle_state *new_state = next_valid_state(dev, state);
+	u32 core_next_state, per_next_state = 0, per_saved_state = 0;
+	u32 cam_state;
+	struct omap3_processor_cx *cx;
+	int ret;
 
 	if ((state->flags & CPUIDLE_FLAG_CHECK_BM) && omap3_idle_bm_check()) {
 		BUG_ON(!dev->safe_state);
 		new_state = dev->safe_state;
+		goto select_state;
+	}
+
+	cx = cpuidle_get_statedata(state);
+	core_next_state = cx->core_state;
+
+	/*
+	 * FIXME: we currently manage device-specific idle states
+	 *        for PER and CORE in combination with CPU-specific
+	 *        idle states.  This is wrong, and device-specific
+	 *        idle managment needs to be separated out into 
+	 *        its own code.
+	 */
+
+	/*
+	 * Prevent idle completely if CAM is active.
+	 * CAM does not have wakeup capability in OMAP3.
+	 */
+	cam_state = pwrdm_read_pwrst(cam_pd);
+	if (cam_state == PWRDM_POWER_ON) {
+		new_state = dev->safe_state;
+		goto select_state;
+	}
+
+	/*
+	 * Prevent PER off if CORE is not in retention or off as this
+	 * would disable PER wakeups completely.
+	 */
+	per_next_state = per_saved_state = pwrdm_read_next_pwrst(per_pd);
+	if ((per_next_state == PWRDM_POWER_OFF) &&
+	    (core_next_state > PWRDM_POWER_RET)) {
+		per_next_state = PWRDM_POWER_RET;
+		pwrdm_set_next_pwrst(per_pd, per_next_state);
 	}
 
+	/* Are we changing PER target state? */
+	if (per_next_state != per_saved_state)
+		pwrdm_set_next_pwrst(per_pd, per_next_state);
+
+select_state:
 	dev->last_state = new_state;
-	return omap3_enter_idle(dev, new_state);
+	ret = omap3_enter_idle(dev, new_state);
+
+	/* Restore original PER state if it was modified */
+	if (per_next_state != per_saved_state)
+		pwrdm_set_next_pwrst(per_pd, per_saved_state);
+
+	return ret;
 }
 
 DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev);
@@ -328,7 +377,8 @@ void omap_init_power_states(void)
 			cpuidle_params_table[OMAP3_STATE_C2].threshold;
 	omap3_power_states[OMAP3_STATE_C2].mpu_state = PWRDM_POWER_ON;
 	omap3_power_states[OMAP3_STATE_C2].core_state = PWRDM_POWER_ON;
-	omap3_power_states[OMAP3_STATE_C2].flags = CPUIDLE_FLAG_TIME_VALID;
+	omap3_power_states[OMAP3_STATE_C2].flags = CPUIDLE_FLAG_TIME_VALID |
+				CPUIDLE_FLAG_CHECK_BM;
 
 	/* C3 . MPU CSWR + Core inactive */
 	omap3_power_states[OMAP3_STATE_C3].valid =
@@ -426,6 +476,8 @@ int __init omap3_idle_init(void)
 
 	mpu_pd = pwrdm_lookup("mpu_pwrdm");
 	core_pd = pwrdm_lookup("core_pwrdm");
+	per_pd = pwrdm_lookup("per_pwrdm");
+	cam_pd = pwrdm_lookup("cam_pwrdm");
 
 	omap_init_power_states();
 	cpuidle_register_driver(&omap3_idle_driver);
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index b9ea70bce563..490d87082fad 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -323,6 +323,9 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
 		omap2430_hwmod_init();
 	else if (cpu_is_omap34xx())
 		omap3xxx_hwmod_init();
+	else if (cpu_is_omap44xx())
+		omap44xx_hwmod_init();
+
 	/* The OPP tables have to be registered before a clk init */
 	omap_pm_if_early_init(mpu_opps, dsp_opps, l3_opps);
 
@@ -342,9 +345,7 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
 #ifndef CONFIG_PM_RUNTIME
 	skip_setup_idle = 1;
 #endif
-	if (cpu_is_omap24xx() || cpu_is_omap34xx())   /* FIXME: OMAP4 */
-		omap_hwmod_late_init(skip_setup_idle);
-
+	omap_hwmod_late_init(skip_setup_idle);
 	if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
 		omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
 		_omap2_init_reprogram_sdrc();
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index cb911d7d1a3c..c3a5889d8add 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -13,10 +13,102 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
- * This code manages "OMAP modules" (on-chip devices) and their
- * integration with Linux device driver and bus code.
- *
- * References:
+ * Introduction
+ * ------------
+ * One way to view an OMAP SoC is as a collection of largely unrelated
+ * IP blocks connected by interconnects.  The IP blocks include
+ * devices such as ARM processors, audio serial interfaces, UARTs,
+ * etc.  Some of these devices, like the DSP, are created by TI;
+ * others, like the SGX, largely originate from external vendors.  In
+ * TI's documentation, on-chip devices are referred to as "OMAP
+ * modules."  Some of these IP blocks are identical across several
+ * OMAP versions.  Others are revised frequently.
+ *
+ * These OMAP modules are tied together by various interconnects.
+ * Most of the address and data flow between modules is via OCP-based
+ * interconnects such as the L3 and L4 buses; but there are other
+ * interconnects that distribute the hardware clock tree, handle idle
+ * and reset signaling, supply power, and connect the modules to
+ * various pads or balls on the OMAP package.
+ *
+ * OMAP hwmod provides a consistent way to describe the on-chip
+ * hardware blocks and their integration into the rest of the chip.
+ * This description can be automatically generated from the TI
+ * hardware database.  OMAP hwmod provides a standard, consistent API
+ * to reset, enable, idle, and disable these hardware blocks.  And
+ * hwmod provides a way for other core code, such as the Linux device
+ * code or the OMAP power management and address space mapping code,
+ * to query the hardware database.
+ *
+ * Using hwmod
+ * -----------
+ * Drivers won't call hwmod functions directly.  That is done by the
+ * omap_device code, and in rare occasions, by custom integration code
+ * in arch/arm/ *omap*.  The omap_device code includes functions to
+ * build a struct platform_device using omap_hwmod data, and that is
+ * currently how hwmod data is communicated to drivers and to the
+ * Linux driver model.  Most drivers will call omap_hwmod functions only
+ * indirectly, via pm_runtime*() functions.
+ *
+ * From a layering perspective, here is where the OMAP hwmod code
+ * fits into the kernel software stack:
+ *
+ *            +-------------------------------+
+ *            |      Device driver code       |
+ *            |      (e.g., drivers/)         |
+ *            +-------------------------------+
+ *            |      Linux driver model       |
+ *            |     (platform_device /        |
+ *            |  platform_driver data/code)   |
+ *            +-------------------------------+
+ *            | OMAP core-driver integration  |
+ *            |(arch/arm/mach-omap2/devices.c)|
+ *            +-------------------------------+
+ *            |      omap_device code         |
+ *            | (../plat-omap/omap_device.c)  |
+ *            +-------------------------------+
+ *   ---->    |    omap_hwmod code/data       |    <-----
+ *            | (../mach-omap2/omap_hwmod*)   |
+ *            +-------------------------------+
+ *            | OMAP clock/PRCM/register fns  |
+ *            | (__raw_{read,write}l, clk*)   |
+ *            +-------------------------------+
+ *
+ * Device drivers should not contain any OMAP-specific code or data in
+ * them.  They should only contain code to operate the IP block that
+ * the driver is responsible for.  This is because these IP blocks can
+ * also appear in other SoCs, either from TI (such as DaVinci) or from
+ * other manufacturers; and drivers should be reusable across other
+ * platforms.
+ *
+ * The OMAP hwmod code also will attempt to reset and idle all on-chip
+ * devices upon boot.  The goal here is for the kernel to be
+ * completely self-reliant and independent from bootloaders.  This is
+ * to ensure a repeatable configuration, both to ensure consistent
+ * runtime behavior, and to make it easier for others to reproduce
+ * bugs.
+ *
+ * OMAP module activity states
+ * ---------------------------
+ * The hwmod code considers modules to be in one of several activity
+ * states.  IP blocks start out in an UNKNOWN state, then once they
+ * are registered via the hwmod code, proceed to the REGISTERED state.
+ * Once their clock names are resolved to clock pointers, the module
+ * enters the CLKS_INITED state; and finally, once the module has been
+ * reset and the integration registers programmed, the INITIALIZED state
+ * is entered.  The hwmod code will then place the module into either
+ * the IDLE state to save power, or in the case of a critical system
+ * module, the ENABLED state.
+ *
+ * OMAP core integration code can then call omap_hwmod*() functions
+ * directly to move the module between the IDLE, ENABLED, and DISABLED
+ * states, as needed.  This is done during both the PM idle loop, and
+ * in the OMAP core integration code's implementation of the PM runtime
+ * functions.
+ *
+ * References
+ * ----------
+ * This is a partial list.
  * - OMAP2420 Multimedia Processor Silicon Revision 2.1.1, 2.2 (SWPU064)
  * - OMAP2430 Multimedia Device POP Silicon Revision 2.1 (SWPU090)
  * - OMAP34xx Multimedia Device Silicon Revision 3.1 (SWPU108)
@@ -50,11 +142,13 @@
 #include <plat/powerdomain.h>
 #include <plat/clock.h>
 #include <plat/omap_hwmod.h>
+#include <plat/prcm.h>
 
 #include "cm.h"
+#include "prm.h"
 
-/* Maximum microseconds to wait for OMAP module to reset */
-#define MAX_MODULE_RESET_WAIT		10000
+/* Maximum microseconds to wait for OMAP module to softreset */
+#define MAX_MODULE_SOFTRESET_WAIT	10000
 
 /* Name of the OMAP hwmod for the MPU */
 #define MPU_INITIATOR_NAME		"mpu"
@@ -544,6 +638,36 @@ static int _disable_clocks(struct omap_hwmod *oh)
 	return 0;
 }
 
+static void _enable_optional_clocks(struct omap_hwmod *oh)
+{
+	struct omap_hwmod_opt_clk *oc;
+	int i;
+
+	pr_debug("omap_hwmod: %s: enabling optional clocks\n", oh->name);
+
+	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
+		if (oc->_clk) {
+			pr_debug("omap_hwmod: enable %s:%s\n", oc->role,
+				 oc->_clk->name);
+			clk_enable(oc->_clk);
+		}
+}
+
+static void _disable_optional_clocks(struct omap_hwmod *oh)
+{
+	struct omap_hwmod_opt_clk *oc;
+	int i;
+
+	pr_debug("omap_hwmod: %s: disabling optional clocks\n", oh->name);
+
+	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
+		if (oc->_clk) {
+			pr_debug("omap_hwmod: disable %s:%s\n", oc->role,
+				 oc->_clk->name);
+			clk_disable(oc->_clk);
+		}
+}
+
 /**
  * _find_mpu_port_index - find hwmod OCP slave port ID intended for MPU use
  * @oh: struct omap_hwmod *
@@ -622,7 +746,7 @@ static void __iomem *_find_mpu_rt_base(struct omap_hwmod *oh, u8 index)
 }
 
 /**
- * _sysc_enable - try to bring a module out of idle via OCP_SYSCONFIG
+ * _enable_sysc - try to bring a module out of idle via OCP_SYSCONFIG
  * @oh: struct omap_hwmod *
  *
  * If module is marked as SWSUP_SIDLE, force the module out of slave
@@ -630,7 +754,7 @@ static void __iomem *_find_mpu_rt_base(struct omap_hwmod *oh, u8 index)
  * as SWSUP_MSUSPEND, force the module out of master standby;
  * otherwise, configure it for smart-standby.  No return value.
  */
-static void _sysc_enable(struct omap_hwmod *oh)
+static void _enable_sysc(struct omap_hwmod *oh)
 {
 	u8 idlemode, sf;
 	u32 v;
@@ -659,8 +783,6 @@ static void _sysc_enable(struct omap_hwmod *oh)
 		_set_module_autoidle(oh, idlemode, &v);
 	}
 
-	/* XXX OCP ENAWAKEUP bit? */
-
 	/*
 	 * XXX The clock framework should handle this, by
 	 * calling into this code.  But this must wait until the
@@ -671,10 +793,14 @@ static void _sysc_enable(struct omap_hwmod *oh)
 		_set_clockactivity(oh, oh->class->sysc->clockact, &v);
 
 	_write_sysconfig(v, oh);
+
+	/* If slave is in SMARTIDLE, also enable wakeup */
+	if ((sf & SYSC_HAS_SIDLEMODE) && !(oh->flags & HWMOD_SWSUP_SIDLE))
+		_enable_wakeup(oh);
 }
 
 /**
- * _sysc_idle - try to put a module into idle via OCP_SYSCONFIG
+ * _idle_sysc - try to put a module into idle via OCP_SYSCONFIG
  * @oh: struct omap_hwmod *
  *
  * If module is marked as SWSUP_SIDLE, force the module into slave
@@ -682,7 +808,7 @@ static void _sysc_enable(struct omap_hwmod *oh)
  * as SWSUP_MSUSPEND, force the module into master standby; otherwise,
  * configure it for smart-standby.  No return value.
  */
-static void _sysc_idle(struct omap_hwmod *oh)
+static void _idle_sysc(struct omap_hwmod *oh)
 {
 	u8 idlemode, sf;
 	u32 v;
@@ -709,13 +835,13 @@ static void _sysc_idle(struct omap_hwmod *oh)
 }
 
 /**
- * _sysc_shutdown - force a module into idle via OCP_SYSCONFIG
+ * _shutdown_sysc - force a module into idle via OCP_SYSCONFIG
  * @oh: struct omap_hwmod *
  *
  * Force the module into slave idle and master suspend. No return
  * value.
  */
-static void _sysc_shutdown(struct omap_hwmod *oh)
+static void _shutdown_sysc(struct omap_hwmod *oh)
 {
 	u32 v;
 	u8 sf;
@@ -767,10 +893,10 @@ static struct omap_hwmod *_lookup(const char *name)
  * @data: not used; pass NULL
  *
  * Called by omap_hwmod_late_init() (after omap2_clk_init()).
- * Resolves all clock names embedded in the hwmod.  Must be called
- * with omap_hwmod_mutex held.  Returns -EINVAL if the omap_hwmod
- * has not yet been registered or if the clocks have already been
- * initialized, 0 on success, or a non-zero error on failure.
+ * Resolves all clock names embedded in the hwmod.  Returns -EINVAL if
+ * the omap_hwmod has not yet been registered or if the clocks have
+ * already been initialized, 0 on success, or a non-zero error on
+ * failure.
  */
 static int _init_clocks(struct omap_hwmod *oh, void *data)
 {
@@ -834,56 +960,202 @@ static int _wait_target_ready(struct omap_hwmod *oh)
 }
 
 /**
+ * _lookup_hardreset - return the register bit shift for this hwmod/reset line
+ * @oh: struct omap_hwmod *
+ * @name: name of the reset line in the context of this hwmod
+ *
+ * Return the bit position of the reset line that match the
+ * input name. Return -ENOENT if not found.
+ */
+static u8 _lookup_hardreset(struct omap_hwmod *oh, const char *name)
+{
+	int i;
+
+	for (i = 0; i < oh->rst_lines_cnt; i++) {
+		const char *rst_line = oh->rst_lines[i].name;
+		if (!strcmp(rst_line, name)) {
+			u8 shift = oh->rst_lines[i].rst_shift;
+			pr_debug("omap_hwmod: %s: _lookup_hardreset: %s: %d\n",
+				 oh->name, rst_line, shift);
+
+			return shift;
+		}
+	}
+
+	return -ENOENT;
+}
+
+/**
+ * _assert_hardreset - assert the HW reset line of submodules
+ * contained in the hwmod module.
+ * @oh: struct omap_hwmod *
+ * @name: name of the reset line to lookup and assert
+ *
+ * Some IP like dsp, ipu or iva contain processor that require
+ * an HW reset line to be assert / deassert in order to enable fully
+ * the IP.
+ */
+static int _assert_hardreset(struct omap_hwmod *oh, const char *name)
+{
+	u8 shift;
+
+	if (!oh)
+		return -EINVAL;
+
+	shift = _lookup_hardreset(oh, name);
+	if (IS_ERR_VALUE(shift))
+		return shift;
+
+	if (cpu_is_omap24xx() || cpu_is_omap34xx())
+		return omap2_prm_assert_hardreset(oh->prcm.omap2.module_offs,
+						  shift);
+	else if (cpu_is_omap44xx())
+		return omap4_prm_assert_hardreset(oh->prcm.omap4.rstctrl_reg,
+						  shift);
+	else
+		return -EINVAL;
+}
+
+/**
+ * _deassert_hardreset - deassert the HW reset line of submodules contained
+ * in the hwmod module.
+ * @oh: struct omap_hwmod *
+ * @name: name of the reset line to look up and deassert
+ *
+ * Some IP like dsp, ipu or iva contain processor that require
+ * an HW reset line to be assert / deassert in order to enable fully
+ * the IP.
+ */
+static int _deassert_hardreset(struct omap_hwmod *oh, const char *name)
+{
+	u8 shift;
+	int r;
+
+	if (!oh)
+		return -EINVAL;
+
+	shift = _lookup_hardreset(oh, name);
+	if (IS_ERR_VALUE(shift))
+		return shift;
+
+	if (cpu_is_omap24xx() || cpu_is_omap34xx())
+		r = omap2_prm_deassert_hardreset(oh->prcm.omap2.module_offs,
+						 shift);
+	else if (cpu_is_omap44xx())
+		r = omap4_prm_deassert_hardreset(oh->prcm.omap4.rstctrl_reg,
+						 shift);
+	else
+		return -EINVAL;
+
+	if (r == -EBUSY)
+		pr_warning("omap_hwmod: %s: failed to hardreset\n", oh->name);
+
+	return r;
+}
+
+/**
+ * _read_hardreset - read the HW reset line state of submodules
+ * contained in the hwmod module
+ * @oh: struct omap_hwmod *
+ * @name: name of the reset line to look up and read
+ *
+ * Return the state of the reset line.
+ */
+static int _read_hardreset(struct omap_hwmod *oh, const char *name)
+{
+	u8 shift;
+
+	if (!oh)
+		return -EINVAL;
+
+	shift = _lookup_hardreset(oh, name);
+	if (IS_ERR_VALUE(shift))
+		return shift;
+
+	if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
+		return omap2_prm_is_hardreset_asserted(oh->prcm.omap2.module_offs,
+						       shift);
+	} else if (cpu_is_omap44xx()) {
+		return omap4_prm_is_hardreset_asserted(oh->prcm.omap4.rstctrl_reg,
+						       shift);
+	} else {
+		return -EINVAL;
+	}
+}
+
+/**
  * _reset - reset an omap_hwmod
  * @oh: struct omap_hwmod *
  *
  * Resets an omap_hwmod @oh via the OCP_SYSCONFIG bit.  hwmod must be
- * enabled for this to work.  Must be called with omap_hwmod_mutex
- * held.  Returns -EINVAL if the hwmod cannot be reset this way or if
- * the hwmod is in the wrong state, -ETIMEDOUT if the module did not
- * reset in time, or 0 upon success.
+ * enabled for this to work.  Returns -EINVAL if the hwmod cannot be
+ * reset this way or if the hwmod is in the wrong state, -ETIMEDOUT if
+ * the module did not reset in time, or 0 upon success.
+ *
+ * In OMAP3 a specific SYSSTATUS register is used to get the reset status.
+ * Starting in OMAP4, some IPs does not have SYSSTATUS register and instead
+ * use the SYSCONFIG softreset bit to provide the status.
+ *
+ * Note that some IP like McBSP does have a reset control but no reset status.
  */
 static int _reset(struct omap_hwmod *oh)
 {
-	u32 r, v;
+	u32 v;
 	int c = 0;
+	int ret = 0;
 
 	if (!oh->class->sysc ||
-	    !(oh->class->sysc->sysc_flags & SYSC_HAS_SOFTRESET) ||
-	    (oh->class->sysc->sysc_flags & SYSS_MISSING))
+	    !(oh->class->sysc->sysc_flags & SYSC_HAS_SOFTRESET))
 		return -EINVAL;
 
 	/* clocks must be on for this operation */
 	if (oh->_state != _HWMOD_STATE_ENABLED) {
-		WARN(1, "omap_hwmod: %s: reset can only be entered from "
-		     "enabled state\n", oh->name);
+		pr_warning("omap_hwmod: %s: reset can only be entered from "
+			   "enabled state\n", oh->name);
 		return -EINVAL;
 	}
 
+	/* For some modules, all optionnal clocks need to be enabled as well */
+	if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET)
+		_enable_optional_clocks(oh);
+
 	pr_debug("omap_hwmod: %s: resetting\n", oh->name);
 
 	v = oh->_sysc_cache;
-	r = _set_softreset(oh, &v);
-	if (r)
-		return r;
+	ret = _set_softreset(oh, &v);
+	if (ret)
+		goto dis_opt_clks;
 	_write_sysconfig(v, oh);
 
-	omap_test_timeout((omap_hwmod_readl(oh, oh->class->sysc->syss_offs) &
-			   SYSS_RESETDONE_MASK),
-			  MAX_MODULE_RESET_WAIT, c);
-
-	if (c == MAX_MODULE_RESET_WAIT)
-		WARN(1, "omap_hwmod: %s: failed to reset in %d usec\n",
-		     oh->name, MAX_MODULE_RESET_WAIT);
+	if (oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS)
+		omap_test_timeout((omap_hwmod_readl(oh,
+						    oh->class->sysc->syss_offs)
+				   & SYSS_RESETDONE_MASK),
+				  MAX_MODULE_SOFTRESET_WAIT, c);
+	else if (oh->class->sysc->sysc_flags & SYSC_HAS_RESET_STATUS)
+		omap_test_timeout(!(omap_hwmod_readl(oh,
+						     oh->class->sysc->sysc_offs)
+				   & SYSC_TYPE2_SOFTRESET_MASK),
+				  MAX_MODULE_SOFTRESET_WAIT, c);
+
+	if (c == MAX_MODULE_SOFTRESET_WAIT)
+		pr_warning("omap_hwmod: %s: softreset failed (waited %d usec)\n",
+			   oh->name, MAX_MODULE_SOFTRESET_WAIT);
 	else
-		pr_debug("omap_hwmod: %s: reset in %d usec\n", oh->name, c);
+		pr_debug("omap_hwmod: %s: softreset in %d usec\n", oh->name, c);
 
 	/*
 	 * XXX add _HWMOD_STATE_WEDGED for modules that don't come back from
 	 * _wait_target_ready() or _reset()
 	 */
 
-	return (c == MAX_MODULE_RESET_WAIT) ? -ETIMEDOUT : 0;
+	ret = (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : 0;
+
+dis_opt_clks:
+	if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET)
+		_disable_optional_clocks(oh);
+
+	return ret;
 }
 
 /**
@@ -891,9 +1163,11 @@ static int _reset(struct omap_hwmod *oh)
  * @oh: struct omap_hwmod *
  *
  * Enables an omap_hwmod @oh such that the MPU can access the hwmod's
- * register target.  Must be called with omap_hwmod_mutex held.
- * Returns -EINVAL if the hwmod is in the wrong state or passes along
- * the return value of _wait_target_ready().
+ * register target.  (This function has a full name --
+ * _omap_hwmod_enable() rather than simply _enable() -- because it is
+ * currently required by the pm34xx.c idle loop.)  Returns -EINVAL if
+ * the hwmod is in the wrong state or passes along the return value of
+ * _wait_target_ready().
  */
 int _omap_hwmod_enable(struct omap_hwmod *oh)
 {
@@ -909,6 +1183,15 @@ int _omap_hwmod_enable(struct omap_hwmod *oh)
 
 	pr_debug("omap_hwmod: %s: enabling\n", oh->name);
 
+	/*
+	 * If an IP contains only one HW reset line, then de-assert it in order
+	 * to allow to enable the clocks. Otherwise the PRCM will return
+	 * Intransition status, and the init will failed.
+	 */
+	if ((oh->_state == _HWMOD_STATE_INITIALIZED ||
+	     oh->_state == _HWMOD_STATE_DISABLED) && oh->rst_lines_cnt == 1)
+		_deassert_hardreset(oh, oh->rst_lines[0].name);
+
 	/* XXX mux balls */
 
 	_add_initiator_dep(oh, mpu_oh);
@@ -922,7 +1205,7 @@ int _omap_hwmod_enable(struct omap_hwmod *oh)
 		if (oh->class->sysc) {
 			if (!(oh->_int_flags & _HWMOD_SYSCONFIG_LOADED))
 				_update_sysc_cache(oh);
-			_sysc_enable(oh);
+			_enable_sysc(oh);
 		}
 	} else {
 		pr_debug("omap_hwmod: %s: _wait_target_ready: %d\n",
@@ -933,12 +1216,14 @@ int _omap_hwmod_enable(struct omap_hwmod *oh)
 }
 
 /**
- * _idle - idle an omap_hwmod
+ * _omap_hwmod_idle - idle an omap_hwmod
  * @oh: struct omap_hwmod *
  *
  * Idles an omap_hwmod @oh.  This should be called once the hwmod has
- * no further work.  Returns -EINVAL if the hwmod is in the wrong
- * state or returns 0.
+ * no further work.  (This function has a full name --
+ * _omap_hwmod_idle() rather than simply _idle() -- because it is
+ * currently required by the pm34xx.c idle loop.)  Returns -EINVAL if
+ * the hwmod is in the wrong state or returns 0.
  */
 int _omap_hwmod_idle(struct omap_hwmod *oh)
 {
@@ -951,7 +1236,7 @@ int _omap_hwmod_idle(struct omap_hwmod *oh)
 	pr_debug("omap_hwmod: %s: idling\n", oh->name);
 
 	if (oh->class->sysc)
-		_sysc_idle(oh);
+		_idle_sysc(oh);
 	_del_initiator_dep(oh, mpu_oh);
 	_disable_clocks(oh);
 
@@ -981,10 +1266,21 @@ static int _shutdown(struct omap_hwmod *oh)
 	pr_debug("omap_hwmod: %s: disabling\n", oh->name);
 
 	if (oh->class->sysc)
-		_sysc_shutdown(oh);
-	_del_initiator_dep(oh, mpu_oh);
-	/* XXX what about the other system initiators here? DMA, tesla, d2d */
-	_disable_clocks(oh);
+		_shutdown_sysc(oh);
+
+	/*
+	 * If an IP contains only one HW reset line, then assert it
+	 * before disabling the clocks and shutting down the IP.
+	 */
+	if (oh->rst_lines_cnt == 1)
+		_assert_hardreset(oh, oh->rst_lines[0].name);
+
+	/* clocks and deps are already disabled in idle */
+	if (oh->_state == _HWMOD_STATE_ENABLED) {
+		_del_initiator_dep(oh, mpu_oh);
+		/* XXX what about the other system initiators here? dma, dsp */
+		_disable_clocks(oh);
+	}
 	/* XXX Should this code also force-disable the optional clocks? */
 
 	/* XXX mux any associated balls to safe mode */
@@ -1000,11 +1296,10 @@ static int _shutdown(struct omap_hwmod *oh)
  * @skip_setup_idle_p: do not idle hwmods at the end of the fn if 1
  *
  * Writes the CLOCKACTIVITY bits @clockact to the hwmod @oh
- * OCP_SYSCONFIG register.  Must be called with omap_hwmod_mutex held.
- * @skip_setup_idle is intended to be used on a system that will not
- * call omap_hwmod_enable() to enable devices (e.g., a system without
- * PM runtime).  Returns -EINVAL if the hwmod is in the wrong state or
- * returns 0.
+ * OCP_SYSCONFIG register.  @skip_setup_idle is intended to be used on
+ * a system that will not call omap_hwmod_enable() to enable devices
+ * (e.g., a system without PM runtime).  Returns -EINVAL if the hwmod
+ * is in the wrong state or returns 0.
  */
 static int _setup(struct omap_hwmod *oh, void *data)
 {
@@ -1034,8 +1329,19 @@ static int _setup(struct omap_hwmod *oh, void *data)
 		}
 	}
 
+	mutex_init(&oh->_mutex);
 	oh->_state = _HWMOD_STATE_INITIALIZED;
 
+	/*
+	 * In the case of hwmod with hardreset that should not be
+	 * de-assert at boot time, we have to keep the module
+	 * initialized, because we cannot enable it properly with the
+	 * reset asserted. Exit without warning because that behavior is
+	 * expected.
+	 */
+	if ((oh->flags & HWMOD_INIT_NO_RESET) && oh->rst_lines_cnt == 1)
+		return 0;
+
 	r = _omap_hwmod_enable(oh);
 	if (r) {
 		pr_warning("omap_hwmod: %s: cannot be enabled (%d)\n",
@@ -1044,16 +1350,16 @@ static int _setup(struct omap_hwmod *oh, void *data)
 	}
 
 	if (!(oh->flags & HWMOD_INIT_NO_RESET)) {
+		_reset(oh);
+
 		/*
-		 * XXX Do the OCP_SYSCONFIG bits need to be
-		 * reprogrammed after a reset?  If not, then this can
-		 * be removed.  If they do, then probably the
-		 * _omap_hwmod_enable() function should be split to avoid the
-		 * rewrite of the OCP_SYSCONFIG register.
+		 * OCP_SYSCONFIG bits need to be reprogrammed after a softreset.
+		 * The _omap_hwmod_enable() function should be split to
+		 * avoid the rewrite of the OCP_SYSCONFIG register.
 		 */
 		if (oh->class->sysc) {
 			_update_sysc_cache(oh);
-			_sysc_enable(oh);
+			_enable_sysc(oh);
 		}
 	}
 
@@ -1309,7 +1615,7 @@ int omap_hwmod_unregister(struct omap_hwmod *oh)
  * omap_hwmod_enable - enable an omap_hwmod
  * @oh: struct omap_hwmod *
  *
- * Enable an omap_hwomd @oh.  Intended to be called by omap_device_enable().
+ * Enable an omap_hwmod @oh.  Intended to be called by omap_device_enable().
  * Returns -EINVAL on error or passes along the return value from _enable().
  */
 int omap_hwmod_enable(struct omap_hwmod *oh)
@@ -1319,9 +1625,9 @@ int omap_hwmod_enable(struct omap_hwmod *oh)
 	if (!oh)
 		return -EINVAL;
 
-	mutex_lock(&omap_hwmod_mutex);
+	mutex_lock(&oh->_mutex);
 	r = _omap_hwmod_enable(oh);
-	mutex_unlock(&omap_hwmod_mutex);
+	mutex_unlock(&oh->_mutex);
 
 	return r;
 }
@@ -1331,7 +1637,7 @@ int omap_hwmod_enable(struct omap_hwmod *oh)
  * omap_hwmod_idle - idle an omap_hwmod
  * @oh: struct omap_hwmod *
  *
- * Idle an omap_hwomd @oh.  Intended to be called by omap_device_idle().
+ * Idle an omap_hwmod @oh.  Intended to be called by omap_device_idle().
  * Returns -EINVAL on error or passes along the return value from _idle().
  */
 int omap_hwmod_idle(struct omap_hwmod *oh)
@@ -1339,9 +1645,9 @@ int omap_hwmod_idle(struct omap_hwmod *oh)
 	if (!oh)
 		return -EINVAL;
 
-	mutex_lock(&omap_hwmod_mutex);
+	mutex_lock(&oh->_mutex);
 	_omap_hwmod_idle(oh);
-	mutex_unlock(&omap_hwmod_mutex);
+	mutex_unlock(&oh->_mutex);
 
 	return 0;
 }
@@ -1350,7 +1656,7 @@ int omap_hwmod_idle(struct omap_hwmod *oh)
  * omap_hwmod_shutdown - shutdown an omap_hwmod
  * @oh: struct omap_hwmod *
  *
- * Shutdown an omap_hwomd @oh.  Intended to be called by
+ * Shutdown an omap_hwmod @oh.  Intended to be called by
  * omap_device_shutdown().  Returns -EINVAL on error or passes along
  * the return value from _shutdown().
  */
@@ -1359,9 +1665,9 @@ int omap_hwmod_shutdown(struct omap_hwmod *oh)
 	if (!oh)
 		return -EINVAL;
 
-	mutex_lock(&omap_hwmod_mutex);
+	mutex_lock(&oh->_mutex);
 	_shutdown(oh);
-	mutex_unlock(&omap_hwmod_mutex);
+	mutex_unlock(&oh->_mutex);
 
 	return 0;
 }
@@ -1374,9 +1680,9 @@ int omap_hwmod_shutdown(struct omap_hwmod *oh)
  */
 int omap_hwmod_enable_clocks(struct omap_hwmod *oh)
 {
-	mutex_lock(&omap_hwmod_mutex);
+	mutex_lock(&oh->_mutex);
 	_enable_clocks(oh);
-	mutex_unlock(&omap_hwmod_mutex);
+	mutex_unlock(&oh->_mutex);
 
 	return 0;
 }
@@ -1389,9 +1695,9 @@ int omap_hwmod_enable_clocks(struct omap_hwmod *oh)
  */
 int omap_hwmod_disable_clocks(struct omap_hwmod *oh)
 {
-	mutex_lock(&omap_hwmod_mutex);
+	mutex_lock(&oh->_mutex);
 	_disable_clocks(oh);
-	mutex_unlock(&omap_hwmod_mutex);
+	mutex_unlock(&oh->_mutex);
 
 	return 0;
 }
@@ -1430,20 +1736,18 @@ void omap_hwmod_ocp_barrier(struct omap_hwmod *oh)
  *
  * Under some conditions, a driver may wish to reset the entire device.
  * Called from omap_device code.  Returns -EINVAL on error or passes along
- * the return value from _reset()/_enable().
+ * the return value from _reset().
  */
 int omap_hwmod_reset(struct omap_hwmod *oh)
 {
 	int r;
 
-	if (!oh || !(oh->_state & _HWMOD_STATE_ENABLED))
+	if (!oh)
 		return -EINVAL;
 
-	mutex_lock(&omap_hwmod_mutex);
+	mutex_lock(&oh->_mutex);
 	r = _reset(oh);
-	if (!r)
-		r = _omap_hwmod_enable(oh);
-	mutex_unlock(&omap_hwmod_mutex);
+	mutex_unlock(&oh->_mutex);
 
 	return r;
 }
@@ -1468,7 +1772,7 @@ int omap_hwmod_count_resources(struct omap_hwmod *oh)
 {
 	int ret, i;
 
-	ret = oh->mpu_irqs_cnt + oh->sdma_chs_cnt;
+	ret = oh->mpu_irqs_cnt + oh->sdma_reqs_cnt;
 
 	for (i = 0; i < oh->slaves_cnt; i++)
 		ret += oh->slaves[i]->addr_cnt;
@@ -1501,10 +1805,10 @@ int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res)
 		r++;
 	}
 
-	for (i = 0; i < oh->sdma_chs_cnt; i++) {
-		(res + r)->name = (oh->sdma_chs + i)->name;
-		(res + r)->start = (oh->sdma_chs + i)->dma_ch;
-		(res + r)->end = (oh->sdma_chs + i)->dma_ch;
+	for (i = 0; i < oh->sdma_reqs_cnt; i++) {
+		(res + r)->name = (oh->sdma_reqs + i)->name;
+		(res + r)->start = (oh->sdma_reqs + i)->dma_req;
+		(res + r)->end = (oh->sdma_reqs + i)->dma_req;
 		(res + r)->flags = IORESOURCE_DMA;
 		r++;
 	}
@@ -1644,9 +1948,9 @@ int omap_hwmod_enable_wakeup(struct omap_hwmod *oh)
 	    !(oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP))
 		return -EINVAL;
 
-	mutex_lock(&omap_hwmod_mutex);
+	mutex_lock(&oh->_mutex);
 	_enable_wakeup(oh);
-	mutex_unlock(&omap_hwmod_mutex);
+	mutex_unlock(&oh->_mutex);
 
 	return 0;
 }
@@ -1669,14 +1973,92 @@ int omap_hwmod_disable_wakeup(struct omap_hwmod *oh)
 	    !(oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP))
 		return -EINVAL;
 
-	mutex_lock(&omap_hwmod_mutex);
+	mutex_lock(&oh->_mutex);
 	_disable_wakeup(oh);
-	mutex_unlock(&omap_hwmod_mutex);
+	mutex_unlock(&oh->_mutex);
 
 	return 0;
 }
 
 /**
+ * omap_hwmod_assert_hardreset - assert the HW reset line of submodules
+ * contained in the hwmod module.
+ * @oh: struct omap_hwmod *
+ * @name: name of the reset line to lookup and assert
+ *
+ * Some IP like dsp, ipu or iva contain processor that require
+ * an HW reset line to be assert / deassert in order to enable fully
+ * the IP.  Returns -EINVAL if @oh is null or if the operation is not
+ * yet supported on this OMAP; otherwise, passes along the return value
+ * from _assert_hardreset().
+ */
+int omap_hwmod_assert_hardreset(struct omap_hwmod *oh, const char *name)
+{
+	int ret;
+
+	if (!oh)
+		return -EINVAL;
+
+	mutex_lock(&oh->_mutex);
+	ret = _assert_hardreset(oh, name);
+	mutex_unlock(&oh->_mutex);
+
+	return ret;
+}
+
+/**
+ * omap_hwmod_deassert_hardreset - deassert the HW reset line of submodules
+ * contained in the hwmod module.
+ * @oh: struct omap_hwmod *
+ * @name: name of the reset line to look up and deassert
+ *
+ * Some IP like dsp, ipu or iva contain processor that require
+ * an HW reset line to be assert / deassert in order to enable fully
+ * the IP.  Returns -EINVAL if @oh is null or if the operation is not
+ * yet supported on this OMAP; otherwise, passes along the return value
+ * from _deassert_hardreset().
+ */
+int omap_hwmod_deassert_hardreset(struct omap_hwmod *oh, const char *name)
+{
+	int ret;
+
+	if (!oh)
+		return -EINVAL;
+
+	mutex_lock(&oh->_mutex);
+	ret = _deassert_hardreset(oh, name);
+	mutex_unlock(&oh->_mutex);
+
+	return ret;
+}
+
+/**
+ * omap_hwmod_read_hardreset - read the HW reset line state of submodules
+ * contained in the hwmod module
+ * @oh: struct omap_hwmod *
+ * @name: name of the reset line to look up and read
+ *
+ * Return the current state of the hwmod @oh's reset line named @name:
+ * returns -EINVAL upon parameter error or if this operation
+ * is unsupported on the current OMAP; otherwise, passes along the return
+ * value from _read_hardreset().
+ */
+int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name)
+{
+	int ret;
+
+	if (!oh)
+		return -EINVAL;
+
+	mutex_lock(&oh->_mutex);
+	ret = _read_hardreset(oh, name);
+	mutex_unlock(&oh->_mutex);
+
+	return ret;
+}
+
+
+/**
  * omap_hwmod_for_each_by_class - call @fn for each hwmod of class @classname
  * @classname: struct omap_hwmod_class name to search for
  * @fn: callback function pointer to call for each hwmod in class @classname
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
new file mode 100644
index 000000000000..e20b0eebc6d9
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -0,0 +1,482 @@
+/*
+ * Hardware modules present on the OMAP44xx chips
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2010 Nokia Corporation
+ *
+ * Paul Walmsley
+ * Benoit Cousson
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+
+#include <plat/omap_hwmod.h>
+#include <plat/cpu.h>
+
+#include "omap_hwmod_common_data.h"
+
+#include "cm.h"
+#include "prm-regbits-44xx.h"
+
+/* Base offset for all OMAP4 interrupts external to MPUSS */
+#define OMAP44XX_IRQ_GIC_START	32
+
+/* Base offset for all OMAP4 dma requests */
+#define OMAP44XX_DMA_REQ_START  1
+
+/* Backward references (IPs with Bus Master capability) */
+static struct omap_hwmod omap44xx_dmm_hwmod;
+static struct omap_hwmod omap44xx_emif_fw_hwmod;
+static struct omap_hwmod omap44xx_l3_instr_hwmod;
+static struct omap_hwmod omap44xx_l3_main_1_hwmod;
+static struct omap_hwmod omap44xx_l3_main_2_hwmod;
+static struct omap_hwmod omap44xx_l3_main_3_hwmod;
+static struct omap_hwmod omap44xx_l4_abe_hwmod;
+static struct omap_hwmod omap44xx_l4_cfg_hwmod;
+static struct omap_hwmod omap44xx_l4_per_hwmod;
+static struct omap_hwmod omap44xx_l4_wkup_hwmod;
+static struct omap_hwmod omap44xx_mpu_hwmod;
+static struct omap_hwmod omap44xx_mpu_private_hwmod;
+
+/*
+ * Interconnects omap_hwmod structures
+ * hwmods that compose the global OMAP interconnect
+ */
+
+/*
+ * 'dmm' class
+ * instance(s): dmm
+ */
+static struct omap_hwmod_class omap44xx_dmm_hwmod_class = {
+	.name = "dmm",
+};
+
+/* dmm interface data */
+/* l3_main_1 -> dmm */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_1__dmm = {
+	.master		= &omap44xx_l3_main_1_hwmod,
+	.slave		= &omap44xx_dmm_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* mpu -> dmm */
+static struct omap_hwmod_ocp_if omap44xx_mpu__dmm = {
+	.master		= &omap44xx_mpu_hwmod,
+	.slave		= &omap44xx_dmm_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* dmm slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_dmm_slaves[] = {
+	&omap44xx_l3_main_1__dmm,
+	&omap44xx_mpu__dmm,
+};
+
+static struct omap_hwmod_irq_info omap44xx_dmm_irqs[] = {
+	{ .irq = 113 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod omap44xx_dmm_hwmod = {
+	.name		= "dmm",
+	.class		= &omap44xx_dmm_hwmod_class,
+	.slaves		= omap44xx_dmm_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_dmm_slaves),
+	.mpu_irqs	= omap44xx_dmm_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_dmm_irqs),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/*
+ * 'emif_fw' class
+ * instance(s): emif_fw
+ */
+static struct omap_hwmod_class omap44xx_emif_fw_hwmod_class = {
+	.name = "emif_fw",
+};
+
+/* emif_fw interface data */
+/* dmm -> emif_fw */
+static struct omap_hwmod_ocp_if omap44xx_dmm__emif_fw = {
+	.master		= &omap44xx_dmm_hwmod,
+	.slave		= &omap44xx_emif_fw_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_cfg -> emif_fw */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__emif_fw = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_emif_fw_hwmod,
+	.clk		= "l4_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* emif_fw slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_emif_fw_slaves[] = {
+	&omap44xx_dmm__emif_fw,
+	&omap44xx_l4_cfg__emif_fw,
+};
+
+static struct omap_hwmod omap44xx_emif_fw_hwmod = {
+	.name		= "emif_fw",
+	.class		= &omap44xx_emif_fw_hwmod_class,
+	.slaves		= omap44xx_emif_fw_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_emif_fw_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/*
+ * 'l3' class
+ * instance(s): l3_instr, l3_main_1, l3_main_2, l3_main_3
+ */
+static struct omap_hwmod_class omap44xx_l3_hwmod_class = {
+	.name = "l3",
+};
+
+/* l3_instr interface data */
+/* l3_main_3 -> l3_instr */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_3__l3_instr = {
+	.master		= &omap44xx_l3_main_3_hwmod,
+	.slave		= &omap44xx_l3_instr_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_instr slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_l3_instr_slaves[] = {
+	&omap44xx_l3_main_3__l3_instr,
+};
+
+static struct omap_hwmod omap44xx_l3_instr_hwmod = {
+	.name		= "l3_instr",
+	.class		= &omap44xx_l3_hwmod_class,
+	.slaves		= omap44xx_l3_instr_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_l3_instr_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* l3_main_2 -> l3_main_1 */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l3_main_1 = {
+	.master		= &omap44xx_l3_main_2_hwmod,
+	.slave		= &omap44xx_l3_main_1_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_cfg -> l3_main_1 */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_1 = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_l3_main_1_hwmod,
+	.clk		= "l4_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* mpu -> l3_main_1 */
+static struct omap_hwmod_ocp_if omap44xx_mpu__l3_main_1 = {
+	.master		= &omap44xx_mpu_hwmod,
+	.slave		= &omap44xx_l3_main_1_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_1 slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_l3_main_1_slaves[] = {
+	&omap44xx_l3_main_2__l3_main_1,
+	&omap44xx_l4_cfg__l3_main_1,
+	&omap44xx_mpu__l3_main_1,
+};
+
+static struct omap_hwmod omap44xx_l3_main_1_hwmod = {
+	.name		= "l3_main_1",
+	.class		= &omap44xx_l3_hwmod_class,
+	.slaves		= omap44xx_l3_main_1_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_l3_main_1_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* l3_main_2 interface data */
+/* l3_main_1 -> l3_main_2 */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l3_main_2 = {
+	.master		= &omap44xx_l3_main_1_hwmod,
+	.slave		= &omap44xx_l3_main_2_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_cfg -> l3_main_2 */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_2 = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_l3_main_2_hwmod,
+	.clk		= "l4_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_2 slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_l3_main_2_slaves[] = {
+	&omap44xx_l3_main_1__l3_main_2,
+	&omap44xx_l4_cfg__l3_main_2,
+};
+
+static struct omap_hwmod omap44xx_l3_main_2_hwmod = {
+	.name		= "l3_main_2",
+	.class		= &omap44xx_l3_hwmod_class,
+	.slaves		= omap44xx_l3_main_2_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_l3_main_2_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* l3_main_3 interface data */
+/* l3_main_1 -> l3_main_3 */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l3_main_3 = {
+	.master		= &omap44xx_l3_main_1_hwmod,
+	.slave		= &omap44xx_l3_main_3_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_2 -> l3_main_3 */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l3_main_3 = {
+	.master		= &omap44xx_l3_main_2_hwmod,
+	.slave		= &omap44xx_l3_main_3_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_cfg -> l3_main_3 */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_3 = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_l3_main_3_hwmod,
+	.clk		= "l4_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_3 slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_l3_main_3_slaves[] = {
+	&omap44xx_l3_main_1__l3_main_3,
+	&omap44xx_l3_main_2__l3_main_3,
+	&omap44xx_l4_cfg__l3_main_3,
+};
+
+static struct omap_hwmod omap44xx_l3_main_3_hwmod = {
+	.name		= "l3_main_3",
+	.class		= &omap44xx_l3_hwmod_class,
+	.slaves		= omap44xx_l3_main_3_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_l3_main_3_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/*
+ * 'l4' class
+ * instance(s): l4_abe, l4_cfg, l4_per, l4_wkup
+ */
+static struct omap_hwmod_class omap44xx_l4_hwmod_class = {
+	.name = "l4",
+};
+
+/* l4_abe interface data */
+/* l3_main_1 -> l4_abe */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l4_abe = {
+	.master		= &omap44xx_l3_main_1_hwmod,
+	.slave		= &omap44xx_l4_abe_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* mpu -> l4_abe */
+static struct omap_hwmod_ocp_if omap44xx_mpu__l4_abe = {
+	.master		= &omap44xx_mpu_hwmod,
+	.slave		= &omap44xx_l4_abe_hwmod,
+	.clk		= "ocp_abe_iclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_abe slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_l4_abe_slaves[] = {
+	&omap44xx_l3_main_1__l4_abe,
+	&omap44xx_mpu__l4_abe,
+};
+
+static struct omap_hwmod omap44xx_l4_abe_hwmod = {
+	.name		= "l4_abe",
+	.class		= &omap44xx_l4_hwmod_class,
+	.slaves		= omap44xx_l4_abe_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_l4_abe_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* l4_cfg interface data */
+/* l3_main_1 -> l4_cfg */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l4_cfg = {
+	.master		= &omap44xx_l3_main_1_hwmod,
+	.slave		= &omap44xx_l4_cfg_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_cfg slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_l4_cfg_slaves[] = {
+	&omap44xx_l3_main_1__l4_cfg,
+};
+
+static struct omap_hwmod omap44xx_l4_cfg_hwmod = {
+	.name		= "l4_cfg",
+	.class		= &omap44xx_l4_hwmod_class,
+	.slaves		= omap44xx_l4_cfg_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_l4_cfg_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* l4_per interface data */
+/* l3_main_2 -> l4_per */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l4_per = {
+	.master		= &omap44xx_l3_main_2_hwmod,
+	.slave		= &omap44xx_l4_per_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_l4_per_slaves[] = {
+	&omap44xx_l3_main_2__l4_per,
+};
+
+static struct omap_hwmod omap44xx_l4_per_hwmod = {
+	.name		= "l4_per",
+	.class		= &omap44xx_l4_hwmod_class,
+	.slaves		= omap44xx_l4_per_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_l4_per_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* l4_wkup interface data */
+/* l4_cfg -> l4_wkup */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l4_wkup = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_l4_wkup_hwmod,
+	.clk		= "l4_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_wkup slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_l4_wkup_slaves[] = {
+	&omap44xx_l4_cfg__l4_wkup,
+};
+
+static struct omap_hwmod omap44xx_l4_wkup_hwmod = {
+	.name		= "l4_wkup",
+	.class		= &omap44xx_l4_hwmod_class,
+	.slaves		= omap44xx_l4_wkup_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_l4_wkup_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/*
+ * 'mpu_bus' class
+ * instance(s): mpu_private
+ */
+static struct omap_hwmod_class omap44xx_mpu_bus_hwmod_class = {
+	.name = "mpu_bus",
+};
+
+/* mpu_private interface data */
+/* mpu -> mpu_private */
+static struct omap_hwmod_ocp_if omap44xx_mpu__mpu_private = {
+	.master		= &omap44xx_mpu_hwmod,
+	.slave		= &omap44xx_mpu_private_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* mpu_private slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_mpu_private_slaves[] = {
+	&omap44xx_mpu__mpu_private,
+};
+
+static struct omap_hwmod omap44xx_mpu_private_hwmod = {
+	.name		= "mpu_private",
+	.class		= &omap44xx_mpu_bus_hwmod_class,
+	.slaves		= omap44xx_mpu_private_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_mpu_private_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/*
+ * 'mpu' class
+ * mpu sub-system
+ */
+
+static struct omap_hwmod_class omap44xx_mpu_hwmod_class = {
+	.name = "mpu",
+};
+
+/* mpu */
+static struct omap_hwmod_irq_info omap44xx_mpu_irqs[] = {
+	{ .name = "pl310", .irq = 0 + OMAP44XX_IRQ_GIC_START },
+	{ .name = "cti0", .irq = 1 + OMAP44XX_IRQ_GIC_START },
+	{ .name = "cti1", .irq = 2 + OMAP44XX_IRQ_GIC_START },
+};
+
+/* mpu master ports */
+static struct omap_hwmod_ocp_if *omap44xx_mpu_masters[] = {
+	&omap44xx_mpu__l3_main_1,
+	&omap44xx_mpu__l4_abe,
+	&omap44xx_mpu__dmm,
+};
+
+static struct omap_hwmod omap44xx_mpu_hwmod = {
+	.name		= "mpu",
+	.class		= &omap44xx_mpu_hwmod_class,
+	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+	.mpu_irqs	= omap44xx_mpu_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_mpu_irqs),
+	.main_clk	= "dpll_mpu_m2_ck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_reg = OMAP4430_CM_MPU_MPU_CLKCTRL,
+		},
+	},
+	.masters	= omap44xx_mpu_masters,
+	.masters_cnt	= ARRAY_SIZE(omap44xx_mpu_masters),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
+	/* dmm class */
+	&omap44xx_dmm_hwmod,
+	/* emif_fw class */
+	&omap44xx_emif_fw_hwmod,
+	/* l3 class */
+	&omap44xx_l3_instr_hwmod,
+	&omap44xx_l3_main_1_hwmod,
+	&omap44xx_l3_main_2_hwmod,
+	&omap44xx_l3_main_3_hwmod,
+	/* l4 class */
+	&omap44xx_l4_abe_hwmod,
+	&omap44xx_l4_cfg_hwmod,
+	&omap44xx_l4_per_hwmod,
+	&omap44xx_l4_wkup_hwmod,
+	/* mpu_bus class */
+	&omap44xx_mpu_private_hwmod,
+
+	/* mpu class */
+	&omap44xx_mpu_hwmod,
+	NULL,
+};
+
+int __init omap44xx_hwmod_init(void)
+{
+	return omap_hwmod_init(omap44xx_hwmods);
+}
+
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 723b44e252fd..af00c174d7a9 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -31,12 +31,17 @@
 #include <plat/board.h>
 #include <plat/powerdomain.h>
 #include <plat/clockdomain.h>
+#include <plat/dmtimer.h>
 
 #include "prm.h"
 #include "cm.h"
 #include "pm.h"
 
 int omap2_pm_debug;
+u32 enable_off_mode;
+u32 sleep_while_idle;
+u32 wakeup_timer_seconds;
+u32 wakeup_timer_milliseconds;
 
 #define DUMP_PRM_MOD_REG(mod, reg)    \
 	regs[reg_count].name = #mod "." #reg; \
@@ -349,6 +354,23 @@ void pm_dbg_update_time(struct powerdomain *pwrdm, int prev)
 	pwrdm->timer = t;
 }
 
+void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds)
+{
+	u32 tick_rate, cycles;
+
+	if (!seconds && !milliseconds)
+		return;
+
+	tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
+	cycles = tick_rate * seconds + tick_rate * milliseconds / 1000;
+	omap_dm_timer_stop(gptimer_wakeup);
+	omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
+
+	pr_info("PM: Resume timer in %u.%03u secs"
+		" (%d ticks at %d ticks/sec.)\n",
+		seconds, milliseconds, cycles, tick_rate);
+}
+
 static int clkdm_dbg_show_counter(struct clockdomain *clkdm, void *user)
 {
 	struct seq_file *s = (struct seq_file *)user;
@@ -494,8 +516,10 @@ int pm_dbg_regset_init(int reg_set)
 
 static int pwrdm_suspend_get(void *data, u64 *val)
 {
-	int ret;
-	ret = omap3_pm_get_suspend_state((struct powerdomain *)data);
+	int ret = -EINVAL;
+
+	if (cpu_is_omap34xx())
+		ret = omap3_pm_get_suspend_state((struct powerdomain *)data);
 	*val = ret;
 
 	if (ret >= 0)
@@ -505,7 +529,10 @@ static int pwrdm_suspend_get(void *data, u64 *val)
 
 static int pwrdm_suspend_set(void *data, u64 val)
 {
-	return omap3_pm_set_suspend_state((struct powerdomain *)data, (int)val);
+	if (cpu_is_omap34xx())
+		return omap3_pm_set_suspend_state(
+			(struct powerdomain *)data, (int)val);
+	return -EINVAL;
 }
 
 DEFINE_SIMPLE_ATTRIBUTE(pwrdm_suspend_fops, pwrdm_suspend_get,
@@ -553,8 +580,10 @@ static int option_set(void *data, u64 val)
 
 	*option = val;
 
-	if (option == &enable_off_mode)
-		omap3_pm_off_mode_enable(val);
+	if (option == &enable_off_mode) {
+		if (cpu_is_omap34xx())
+			omap3_pm_off_mode_enable(val);
+	}
 
 	return 0;
 }
@@ -609,6 +638,9 @@ static int __init pm_dbg_init(void)
 				   &sleep_while_idle, &pm_dbg_option_fops);
 	(void) debugfs_create_file("wakeup_timer_seconds", S_IRUGO | S_IWUGO, d,
 				   &wakeup_timer_seconds, &pm_dbg_option_fops);
+	(void) debugfs_create_file("wakeup_timer_milliseconds",
+			S_IRUGO | S_IWUGO, d, &wakeup_timer_milliseconds,
+			&pm_dbg_option_fops);
 	pm_dbg_init_done = 1;
 
 	return 0;
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 68f9f2e95891..59ca03b0e691 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -18,11 +18,15 @@
 #include <plat/omap_device.h>
 #include <plat/common.h>
 
+#include <plat/powerdomain.h>
+#include <plat/clockdomain.h>
+
 static struct omap_device_pm_latency *pm_lats;
 
 static struct device *mpu_dev;
-static struct device *dsp_dev;
+static struct device *iva_dev;
 static struct device *l3_dev;
+static struct device *dsp_dev;
 
 struct device *omap2_get_mpuss_device(void)
 {
@@ -30,10 +34,10 @@ struct device *omap2_get_mpuss_device(void)
 	return mpu_dev;
 }
 
-struct device *omap2_get_dsp_device(void)
+struct device *omap2_get_iva_device(void)
 {
-	WARN_ON_ONCE(!dsp_dev);
-	return dsp_dev;
+	WARN_ON_ONCE(!iva_dev);
+	return iva_dev;
 }
 
 struct device *omap2_get_l3_device(void)
@@ -42,6 +46,13 @@ struct device *omap2_get_l3_device(void)
 	return l3_dev;
 }
 
+struct device *omap4_get_dsp_device(void)
+{
+	WARN_ON_ONCE(!dsp_dev);
+	return dsp_dev;
+}
+EXPORT_SYMBOL(omap4_get_dsp_device);
+
 /* static int _init_omap_device(struct omap_hwmod *oh, void *user) */
 static int _init_omap_device(char *name, struct device **new_dev)
 {
@@ -69,8 +80,60 @@ static int _init_omap_device(char *name, struct device **new_dev)
 static void omap2_init_processor_devices(void)
 {
 	_init_omap_device("mpu", &mpu_dev);
-	_init_omap_device("iva", &dsp_dev);
-	_init_omap_device("l3_main", &l3_dev);
+	_init_omap_device("iva", &iva_dev);
+	if (cpu_is_omap44xx()) {
+		_init_omap_device("l3_main_1", &l3_dev);
+		_init_omap_device("dsp", &dsp_dev);
+	} else {
+		_init_omap_device("l3_main", &l3_dev);
+	}
+}
+
+/*
+ * This sets pwrdm state (other than mpu & core. Currently only ON &
+ * RET are supported. Function is assuming that clkdm doesn't have
+ * hw_sup mode enabled.
+ */
+int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
+{
+	u32 cur_state;
+	int sleep_switch = 0;
+	int ret = 0;
+
+	if (pwrdm == NULL || IS_ERR(pwrdm))
+		return -EINVAL;
+
+	while (!(pwrdm->pwrsts & (1 << state))) {
+		if (state == PWRDM_POWER_OFF)
+			return ret;
+		state--;
+	}
+
+	cur_state = pwrdm_read_next_pwrst(pwrdm);
+	if (cur_state == state)
+		return ret;
+
+	if (pwrdm_read_pwrst(pwrdm) < PWRDM_POWER_ON) {
+		omap2_clkdm_wakeup(pwrdm->pwrdm_clkdms[0]);
+		sleep_switch = 1;
+		pwrdm_wait_transition(pwrdm);
+	}
+
+	ret = pwrdm_set_next_pwrst(pwrdm, state);
+	if (ret) {
+		printk(KERN_ERR "Unable to set state of powerdomain: %s\n",
+		       pwrdm->name);
+		goto err;
+	}
+
+	if (sleep_switch) {
+		omap2_clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]);
+		pwrdm_wait_transition(pwrdm);
+		pwrdm_state_switch(pwrdm);
+	}
+
+err:
+	return ret;
 }
 
 static int __init omap2_common_pm_init(void)
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 3de6ece23fc8..77770a13cea8 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -20,7 +20,7 @@ extern void *omap3_secure_ram_storage;
 extern void omap3_pm_off_mode_enable(int);
 extern void omap_sram_idle(void);
 extern int omap3_can_sleep(void);
-extern int set_pwrdm_state(struct powerdomain *pwrdm, u32 state);
+extern int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state);
 extern int omap3_idle_init(void);
 
 struct cpuidle_params {
@@ -48,9 +48,11 @@ extern struct omap_dm_timer *gptimer_wakeup;
 
 #ifdef CONFIG_PM_DEBUG
 extern void omap2_pm_dump(int mode, int resume, unsigned int us);
+extern void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds);
 extern int omap2_pm_debug;
 #else
 #define omap2_pm_dump(mode, resume, us)		do {} while (0);
+#define omap2_pm_wakeup_on_timer(seconds, milliseconds)	do {} while (0);
 #define omap2_pm_debug				0
 #endif
 
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 7b03426c72a3..d2b940c7215d 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -38,7 +38,6 @@
 #include <plat/prcm.h>
 #include <plat/gpmc.h>
 #include <plat/dma.h>
-#include <plat/dmtimer.h>
 
 #include <asm/tlbflush.h>
 
@@ -55,11 +54,6 @@
 #define OMAP343X_TABLE_VALUE_OFFSET	   0x30
 #define OMAP343X_CONTROL_REG_VALUE_OFFSET  0x32
 
-u32 enable_off_mode;
-u32 sleep_while_idle;
-u32 wakeup_timer_seconds;
-u32 wakeup_timer_milliseconds;
-
 struct power_state {
 	struct powerdomain *pwrdm;
 	u32 next_state;
@@ -351,7 +345,6 @@ void omap_sram_idle(void)
 	int core_next_state = PWRDM_POWER_ON;
 	int core_prev_state, per_prev_state;
 	u32 sdrc_pwr = 0;
-	int per_state_modified = 0;
 
 	if (!_omap_sram_idle)
 		return;
@@ -385,9 +378,9 @@ void omap_sram_idle(void)
 	/* Enable IO-PAD and IO-CHAIN wakeups */
 	per_next_state = pwrdm_read_next_pwrst(per_pwrdm);
 	core_next_state = pwrdm_read_next_pwrst(core_pwrdm);
-	if (omap3_has_io_wakeup() && \
-			(per_next_state < PWRDM_POWER_ON ||
-			core_next_state < PWRDM_POWER_ON)) {
+	if (omap3_has_io_wakeup() &&
+	    (per_next_state < PWRDM_POWER_ON ||
+	     core_next_state < PWRDM_POWER_ON)) {
 		prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN);
 		omap3_enable_io_chain();
 	}
@@ -396,19 +389,10 @@ void omap_sram_idle(void)
 	if (per_next_state < PWRDM_POWER_ON) {
 		omap_uart_prepare_idle(2);
 		omap2_gpio_prepare_for_idle(per_next_state);
-		if (per_next_state == PWRDM_POWER_OFF) {
-			if (core_next_state == PWRDM_POWER_ON) {
-				per_next_state = PWRDM_POWER_RET;
-				pwrdm_set_next_pwrst(per_pwrdm, per_next_state);
-				per_state_modified = 1;
-			} else
+		if (per_next_state == PWRDM_POWER_OFF)
 				omap3_per_save_context();
-		}
 	}
 
-	if (pwrdm_read_pwrst(cam_pwrdm) == PWRDM_POWER_ON)
-		omap2_clkdm_deny_idle(mpu_pwrdm->pwrdm_clkdms[0]);
-
 	/* CORE */
 	if (core_next_state < PWRDM_POWER_ON) {
 		omap_uart_prepare_idle(0);
@@ -475,8 +459,6 @@ void omap_sram_idle(void)
 		if (per_prev_state == PWRDM_POWER_OFF)
 			omap3_per_restore_context();
 		omap_uart_resume_idle(2);
-		if (per_state_modified)
-			pwrdm_set_next_pwrst(per_pwrdm, PWRDM_POWER_OFF);
 	}
 
 	/* Disable IO-PAD and IO-CHAIN wakeup */
@@ -501,51 +483,6 @@ int omap3_can_sleep(void)
 	return 1;
 }
 
-/* This sets pwrdm state (other than mpu & core. Currently only ON &
- * RET are supported. Function is assuming that clkdm doesn't have
- * hw_sup mode enabled. */
-int set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
-{
-	u32 cur_state;
-	int sleep_switch = 0;
-	int ret = 0;
-
-	if (pwrdm == NULL || IS_ERR(pwrdm))
-		return -EINVAL;
-
-	while (!(pwrdm->pwrsts & (1 << state))) {
-		if (state == PWRDM_POWER_OFF)
-			return ret;
-		state--;
-	}
-
-	cur_state = pwrdm_read_next_pwrst(pwrdm);
-	if (cur_state == state)
-		return ret;
-
-	if (pwrdm_read_pwrst(pwrdm) < PWRDM_POWER_ON) {
-		omap2_clkdm_wakeup(pwrdm->pwrdm_clkdms[0]);
-		sleep_switch = 1;
-		pwrdm_wait_transition(pwrdm);
-	}
-
-	ret = pwrdm_set_next_pwrst(pwrdm, state);
-	if (ret) {
-		printk(KERN_ERR "Unable to set state of powerdomain: %s\n",
-		       pwrdm->name);
-		goto err;
-	}
-
-	if (sleep_switch) {
-		omap2_clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]);
-		pwrdm_wait_transition(pwrdm);
-		pwrdm_state_switch(pwrdm);
-	}
-
-err:
-	return ret;
-}
-
 static void omap3_pm_idle(void)
 {
 	local_irq_disable();
@@ -567,23 +504,6 @@ out:
 #ifdef CONFIG_SUSPEND
 static suspend_state_t suspend_state;
 
-static void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds)
-{
-	u32 tick_rate, cycles;
-
-	if (!seconds && !milliseconds)
-		return;
-
-	tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
-	cycles = tick_rate * seconds + tick_rate * milliseconds / 1000;
-	omap_dm_timer_stop(gptimer_wakeup);
-	omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
-
-	pr_info("PM: Resume timer in %u.%03u secs"
-		" (%d ticks at %d ticks/sec.)\n",
-		seconds, milliseconds, cycles, tick_rate);
-}
-
 static int omap3_pm_prepare(void)
 {
 	disable_hlt();
@@ -604,7 +524,7 @@ static int omap3_pm_suspend(void)
 		pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm);
 	/* Set ones wanted by suspend */
 	list_for_each_entry(pwrst, &pwrst_list, node) {
-		if (set_pwrdm_state(pwrst->pwrdm, pwrst->next_state))
+		if (omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state))
 			goto restore;
 		if (pwrdm_clear_all_prev_pwrst(pwrst->pwrdm))
 			goto restore;
@@ -625,7 +545,7 @@ restore:
 			       pwrst->pwrdm->name, pwrst->next_state);
 			ret = -1;
 		}
-		set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
+		omap_set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
 	}
 	if (ret)
 		printk(KERN_ERR "Could not enter target state in pm_suspend\n");
@@ -974,7 +894,7 @@ void omap3_pm_off_mode_enable(int enable)
 
 	list_for_each_entry(pwrst, &pwrst_list, node) {
 		pwrst->next_state = state;
-		set_pwrdm_state(pwrst->pwrdm, state);
+		omap_set_pwrdm_state(pwrst->pwrdm, state);
 	}
 }
 
@@ -1019,7 +939,7 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
 	if (pwrdm_has_hdwr_sar(pwrdm))
 		pwrdm_enable_hdwr_sar(pwrdm);
 
-	return set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
+	return omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
 }
 
 /*
@@ -1029,9 +949,6 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
  */
 static int __init clkdms_setup(struct clockdomain *clkdm, void *unused)
 {
-	clkdm_clear_all_wkdeps(clkdm);
-	clkdm_clear_all_sleepdeps(clkdm);
-
 	if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO)
 		omap2_clkdm_allow_idle(clkdm);
 	else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP &&
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index c20137497c92..d4388d34c26a 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -33,6 +33,7 @@
 #include "cm.h"
 #include "prm.h"
 #include "prm-regbits-24xx.h"
+#include "prm-regbits-44xx.h"
 
 static void __iomem *prm_base;
 static void __iomem *cm_base;
@@ -161,8 +162,8 @@ void omap_prcm_arch_reset(char mode, const char *cmd)
 		prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, prcm_offs,
 						 OMAP2_RM_RSTCTRL);
 	if (cpu_is_omap44xx())
-		prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, prcm_offs,
-						 OMAP4_RM_RSTCTRL);
+		prm_set_mod_reg_bits(OMAP4430_RST_GLOBAL_WARM_SW_MASK,
+				     prcm_offs, OMAP4_RM_RSTCTRL);
 }
 
 static inline u32 __omap_prcm_read(void __iomem *base, s16 module, u16 reg)
@@ -215,6 +216,30 @@ u32 prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
 	return v;
 }
 
+/* Read a PRM register, AND it, and shift the result down to bit 0 */
+u32 omap4_prm_read_bits_shift(void __iomem *reg, u32 mask)
+{
+	u32 v;
+
+	v = __raw_readl(reg);
+	v &= mask;
+	v >>= __ffs(mask);
+
+	return v;
+}
+
+/* Read-modify-write a register in a PRM module. Caller must lock */
+u32 omap4_prm_rmw_reg_bits(u32 mask, u32 bits, void __iomem *reg)
+{
+	u32 v;
+
+	v = __raw_readl(reg);
+	v &= ~mask;
+	v |= bits;
+	__raw_writel(v, reg);
+
+	return v;
+}
 /* Read a register in a CM module */
 u32 cm_read_mod_reg(s16 module, u16 idx)
 {
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index 588873b9303a..7be040b2fdab 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -5,7 +5,7 @@
  * OMAP2/3 Power/Reset Management (PRM) register definitions
  *
  * Copyright (C) 2007-2009 Texas Instruments, Inc.
- * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2010 Nokia Corporation
  *
  * Written by Paul Walmsley
  *
@@ -246,6 +246,15 @@ static inline u32 prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
 	return prm_rmw_mod_reg_bits(bits, 0x0, module, idx);
 }
 
+/* These omap2_ PRM functions apply to both OMAP2 and 3 */
+int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift);
+int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift);
+int omap2_prm_deassert_hardreset(s16 prm_mod, u8 shift);
+
+int omap4_prm_is_hardreset_asserted(void __iomem *rstctrl_reg, u8 shift);
+int omap4_prm_assert_hardreset(void __iomem *rstctrl_reg, u8 shift);
+int omap4_prm_deassert_hardreset(void __iomem *rstctrl_reg, u8 shift);
+
 #endif
 
 /*
@@ -398,4 +407,11 @@ static inline u32 prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
 #define OMAP_POWERSTATE_MASK				(0x3 << 0)
 
 
+/*
+ * MAX_MODULE_HARDRESET_WAIT: Maximum microseconds to wait for an OMAP
+ * submodule to exit hardreset
+ */
+#define MAX_MODULE_HARDRESET_WAIT		10000
+
+
 #endif
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c
new file mode 100644
index 000000000000..421771eee450
--- /dev/null
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c
@@ -0,0 +1,110 @@
+/*
+ * OMAP2/3 PRM module functions
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
+ * Benoît Cousson
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+
+#include <plat/common.h>
+#include <plat/cpu.h>
+#include <plat/prcm.h>
+
+#include "prm.h"
+#include "prm-regbits-24xx.h"
+#include "prm-regbits-34xx.h"
+
+/**
+ * omap2_prm_is_hardreset_asserted - read the HW reset line state of
+ * submodules contained in the hwmod module
+ * @prm_mod: PRM submodule base (e.g. CORE_MOD)
+ * @shift: register bit shift corresponding to the reset line to check
+ *
+ * Returns 1 if the (sub)module hardreset line is currently asserted,
+ * 0 if the (sub)module hardreset line is not currently asserted, or
+ * -EINVAL if called while running on a non-OMAP2/3 chip.
+ */
+int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift)
+{
+	if (!(cpu_is_omap24xx() || cpu_is_omap34xx()))
+		return -EINVAL;
+
+	return prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL,
+				       (1 << shift));
+}
+
+/**
+ * omap2_prm_assert_hardreset - assert the HW reset line of a submodule
+ * @prm_mod: PRM submodule base (e.g. CORE_MOD)
+ * @shift: register bit shift corresponding to the reset line to assert
+ *
+ * Some IPs like dsp or iva contain processors that require an HW
+ * reset line to be asserted / deasserted in order to fully enable the
+ * IP.  These modules may have multiple hard-reset lines that reset
+ * different 'submodules' inside the IP block.  This function will
+ * place the submodule into reset.  Returns 0 upon success or -EINVAL
+ * upon an argument error.
+ */
+int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift)
+{
+	u32 mask;
+
+	if (!(cpu_is_omap24xx() || cpu_is_omap34xx()))
+		return -EINVAL;
+
+	mask = 1 << shift;
+	prm_rmw_mod_reg_bits(mask, mask, prm_mod, OMAP2_RM_RSTCTRL);
+
+	return 0;
+}
+
+/**
+ * omap2_prm_deassert_hardreset - deassert a submodule hardreset line and wait
+ * @prm_mod: PRM submodule base (e.g. CORE_MOD)
+ * @shift: register bit shift corresponding to the reset line to deassert
+ *
+ * Some IPs like dsp or iva contain processors that require an HW
+ * reset line to be asserted / deasserted in order to fully enable the
+ * IP.  These modules may have multiple hard-reset lines that reset
+ * different 'submodules' inside the IP block.  This function will
+ * take the submodule out of reset and wait until the PRCM indicates
+ * that the reset has completed before returning.  Returns 0 upon success or
+ * -EINVAL upon an argument error, -EEXIST if the submodule was already out
+ * of reset, or -EBUSY if the submodule did not exit reset promptly.
+ */
+int omap2_prm_deassert_hardreset(s16 prm_mod, u8 shift)
+{
+	u32 mask;
+	int c;
+
+	if (!(cpu_is_omap24xx() || cpu_is_omap34xx()))
+		return -EINVAL;
+
+	mask = 1 << shift;
+
+	/* Check the current status to avoid de-asserting the line twice */
+	if (prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL, mask) == 0)
+		return -EEXIST;
+
+	/* Clear the reset status by writing 1 to the status bit */
+	prm_rmw_mod_reg_bits(0xffffffff, mask, prm_mod, OMAP2_RM_RSTST);
+	/* de-assert the reset control line */
+	prm_rmw_mod_reg_bits(mask, 0, prm_mod, OMAP2_RM_RSTCTRL);
+	/* wait the status to be set */
+	omap_test_timeout(prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTST,
+						  mask),
+			  MAX_MODULE_HARDRESET_WAIT, c);
+
+	return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
+}
+
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
new file mode 100644
index 000000000000..a1ff918d9bed
--- /dev/null
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -0,0 +1,116 @@
+/*
+ * OMAP4 PRM module functions
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
+ * Benoît Cousson
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+
+#include <plat/common.h>
+#include <plat/cpu.h>
+#include <plat/prcm.h>
+
+#include "prm.h"
+#include "prm-regbits-44xx.h"
+
+/*
+ * Address offset (in bytes) between the reset control and the reset
+ * status registers: 4 bytes on OMAP4
+ */
+#define OMAP4_RST_CTRL_ST_OFFSET		4
+
+/**
+ * omap4_prm_is_hardreset_asserted - read the HW reset line state of
+ * submodules contained in the hwmod module
+ * @rstctrl_reg: RM_RSTCTRL register address for this module
+ * @shift: register bit shift corresponding to the reset line to check
+ *
+ * Returns 1 if the (sub)module hardreset line is currently asserted,
+ * 0 if the (sub)module hardreset line is not currently asserted, or
+ * -EINVAL upon parameter error.
+ */
+int omap4_prm_is_hardreset_asserted(void __iomem *rstctrl_reg, u8 shift)
+{
+	if (!cpu_is_omap44xx() || !rstctrl_reg)
+		return -EINVAL;
+
+	return omap4_prm_read_bits_shift(rstctrl_reg, (1 << shift));
+}
+
+/**
+ * omap4_prm_assert_hardreset - assert the HW reset line of a submodule
+ * @rstctrl_reg: RM_RSTCTRL register address for this module
+ * @shift: register bit shift corresponding to the reset line to assert
+ *
+ * Some IPs like dsp, ipu or iva contain processors that require an HW
+ * reset line to be asserted / deasserted in order to fully enable the
+ * IP.  These modules may have multiple hard-reset lines that reset
+ * different 'submodules' inside the IP block.  This function will
+ * place the submodule into reset.  Returns 0 upon success or -EINVAL
+ * upon an argument error.
+ */
+int omap4_prm_assert_hardreset(void __iomem *rstctrl_reg, u8 shift)
+{
+	u32 mask;
+
+	if (!cpu_is_omap44xx() || !rstctrl_reg)
+		return -EINVAL;
+
+	mask = 1 << shift;
+	omap4_prm_rmw_reg_bits(mask, mask, rstctrl_reg);
+
+	return 0;
+}
+
+/**
+ * omap4_prm_deassert_hardreset - deassert a submodule hardreset line and wait
+ * @rstctrl_reg: RM_RSTCTRL register address for this module
+ * @shift: register bit shift corresponding to the reset line to deassert
+ *
+ * Some IPs like dsp, ipu or iva contain processors that require an HW
+ * reset line to be asserted / deasserted in order to fully enable the
+ * IP.  These modules may have multiple hard-reset lines that reset
+ * different 'submodules' inside the IP block.  This function will
+ * take the submodule out of reset and wait until the PRCM indicates
+ * that the reset has completed before returning.  Returns 0 upon success or
+ * -EINVAL upon an argument error, -EEXIST if the submodule was already out
+ * of reset, or -EBUSY if the submodule did not exit reset promptly.
+ */
+int omap4_prm_deassert_hardreset(void __iomem *rstctrl_reg, u8 shift)
+{
+	u32 mask;
+	void __iomem *rstst_reg;
+	int c;
+
+	if (!cpu_is_omap44xx() || !rstctrl_reg)
+		return -EINVAL;
+
+	rstst_reg = rstctrl_reg + OMAP4_RST_CTRL_ST_OFFSET;
+
+	mask = 1 << shift;
+
+	/* Check the current status to avoid de-asserting the line twice */
+	if (omap4_prm_read_bits_shift(rstctrl_reg, mask) == 0)
+		return -EEXIST;
+
+	/* Clear the reset status by writing 1 to the status bit */
+	omap4_prm_rmw_reg_bits(0xffffffff, mask, rstst_reg);
+	/* de-assert the reset control line */
+	omap4_prm_rmw_reg_bits(mask, 0, rstctrl_reg);
+	/* wait the status to be set */
+	omap_test_timeout(omap4_prm_read_bits_shift(rstst_reg, mask),
+			  MAX_MODULE_HARDRESET_WAIT, c);
+
+	return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
+}
+