5 files changed, 9 insertions, 5 deletions
diff --git a/Documentation/devicetree/bindings/net/davinci_emac.txt b/Documentation/devicetree/bindings/net/davinci_emac.txt
index 24c5cdaba8d2..ca83dcc84fb8 100644
--- a/Documentation/devicetree/bindings/net/davinci_emac.txt
+++ b/Documentation/devicetree/bindings/net/davinci_emac.txt
@@ -20,6 +20,8 @@ Required properties:
 Optional properties:
 - phy-handle: See ethernet.txt file in the same directory.
               If absent, davinci_emac driver defaults to 100/FULL.
+- nvmem-cells: phandle, reference to an nvmem node for the MAC address
+- nvmem-cell-names: string, should be "mac-address" if nvmem is to be used
 - ti,davinci-rmii-en: 1 byte, 1 means use RMII
 - ti,davinci-no-bd-ram: boolean, does EMAC have BD RAM?
 
diff --git a/Documentation/devicetree/bindings/net/ethernet.txt b/Documentation/devicetree/bindings/net/ethernet.txt
index cfc376bc977a..a68621580584 100644
--- a/Documentation/devicetree/bindings/net/ethernet.txt
+++ b/Documentation/devicetree/bindings/net/ethernet.txt
@@ -10,15 +10,14 @@ Documentation/devicetree/bindings/phy/phy-bindings.txt.
   the boot program; should be used in cases where the MAC address assigned to
   the device by the boot program is different from the "local-mac-address"
   property;
-- nvmem-cells: phandle, reference to an nvmem node for the MAC address;
-- nvmem-cell-names: string, should be "mac-address" if nvmem is to be used;
 - max-speed: number, specifies maximum speed in Mbit/s supported by the device;
 - max-frame-size: number, maximum transfer unit (IEEE defined MTU), rather than
   the maximum frame size (there's contradiction in the Devicetree
   Specification).
 - phy-mode: string, operation mode of the PHY interface. This is now a de-facto
   standard property; supported values are:
-  * "internal"
+  * "internal" (Internal means there is not a standard bus between the MAC and
+     the PHY, something proprietary is being used to embed the PHY in the MAC.)
   * "mii"
   * "gmii"
   * "sgmii"
diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt
index 174f292d8a3e..8b80515729d7 100644
--- a/Documentation/devicetree/bindings/net/macb.txt
+++ b/Documentation/devicetree/bindings/net/macb.txt
@@ -26,6 +26,10 @@ Required properties:
 	Optional elements: 'tsu_clk'
 - clocks: Phandles to input clocks.
 
+Optional properties:
+- nvmem-cells: phandle, reference to an nvmem node for the MAC address
+- nvmem-cell-names: string, should be "mac-address" if nvmem is to be used
+
 Optional properties for PHY child node:
 - reset-gpios : Should specify the gpio for phy reset
 - magic-packet : If present, indicates that the hardware supports waking
diff --git a/Documentation/networking/decnet.txt b/Documentation/networking/decnet.txt
index e12a4900cf72..d192f8b9948b 100644
--- a/Documentation/networking/decnet.txt
+++ b/Documentation/networking/decnet.txt
@@ -22,8 +22,6 @@ you'll need the following options as well...
     CONFIG_DECNET_ROUTER (to be able to add/delete routes)
     CONFIG_NETFILTER (will be required for the DECnet routing daemon)
 
-    CONFIG_DECNET_ROUTE_FWMARK is optional
-
 Don't turn on SIOCGIFCONF support for DECnet unless you are really sure
 that you need it, in general you won't and it can cause ifconfig to
 malfunction.
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index acdfb5d2bcaa..e2142fe40cda 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -422,6 +422,7 @@ tcp_min_rtt_wlen - INTEGER
 	minimum RTT when it is moved to a longer path (e.g., due to traffic
 	engineering). A longer window makes the filter more resistant to RTT
 	inflations such as transient congestion. The unit is seconds.
+	Possible values: 0 - 86400 (1 day)
 	Default: 300
 
 tcp_moderate_rcvbuf - BOOLEAN